Exs24 edit window not opening

I've checked the advanced tools and audio options within preferences to get the edit button to show up. However, when I click on the edit button, it lights red to register the click but the windows to drag in my own samples doesn't appear?!
Ay ideas?!

Yours doesn't look like this?
If not make sure Preferences:Advanced:Show Advanced Tools is checked, as well as Additional Options:Audio

Similar Messages

View in edit window not getting updatet properly

Hello
I have some problems with the view in the edit window not getting updatet correctly. I noticed this in spectral view. For example, when I zoom in very much, so I only see about 3 seconds of audio and then select one second of audio and do a time stretch, so it will be two seconds of length, the windows does not update properly.
Normally the audio behind the strechted selection should move backwards, but often the strechted portion just sort of overlaps it and it doesn't move. When I zoom out and then back in, it seems to be ok.
I also have had very weird behavior when trying to remove clicks, with the view also getting pretty messed up.
Does anyone have similar problems with the view not getting updated properly?
I am running german windows xp, audition is installed in english. I first thought that installing it in english instead of german solves the problems, but unfortunately it didn't.
Greetings

Hello again
I made a movie of this behavior:
https://share.ols.inode.at/4NNYXR4HT2CJI5IHY273R9NRHRW9OLGR95Q7VTOP
It shouldn't look like that, right?
Greetings

PhotoShop Elements 9 Edit will not open.

After opening 2 or 3 images in Elements 9 edit a dialog box will come up and say "Elements is already running but is not responding close the Elements process or restart your system". I do not see where I can close the running Elements process. I have used Elements 9 for several months and have never run into this problem. Can anyone suggest a solution to my problem?

Thank you for the response. My Elements 9 Editor problem seemed to fix its
self. After restarting the computer the Editor would open for 2 or 3 images
then refuse to open again. After the fifth restarting of the computer the
Editor has continued to work and now seems fine. Not sure what caused the
problem in the first place. I will use the advise given below if the problem
starts again.
In a message dated 9/20/2011 12:52:16 P.M. Eastern Daylight Time,
[email protected] writes:
Re: PhotoShop Elements 9 Edit will not open.
created by Barbara B. (http://forums.adobe.com/people/Barbara+B.) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/3927008#3927008)

EDIT will not open in PSE 10

I am not able to EDIT from the welcome screen. I have been able to in the past, but not for the last 2 days. I can open the Organizer.
Any suggestions?
thank you

THANK YOU!   Can you tell me how to do that?
Robin
Date: Tue, 3 Jan 2012 15:32:29 -0700
From: [email protected]
To: [email protected]
Subject: EDIT will not open in PSE 10
    Re: EDIT will not open in PSE 10
    created by photodrawken in Photoshop Elements - View the full discussion
Bypass the Unwelcome Screen by creating Desktop shortcuts for the Organizer and the Editor. The Editor's executable is:"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe" The Organizer's executable is:"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe" The Unwelcome Screen leaves a zombie process running which prevents the actual program from launching again. Ken
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4116501#4116501
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4116501#4116501. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Keyboard Shortcuts Window not opening ?

Hi,
I am wondering if anyone else is facing this weird bug? The keyboard shortcut window is not opening in my Premiere Pro...any suggestions/ advice ?
Thanks !

Have you used the "Sync Now" option?
The reason I asked is that I tried that option but typed in the wrong email address and that resulted in the keyboard shortcut window not opening on my laptop.
I got a "Sync failed" error message but after I typed in the right address on my main computer, syncing was successful and the keyboard shortcut window reappeared
on the laptop.
HTH

Edit window not available in EXS24

I'm working with Logic Pro X and am trying to import some kick samples into EXS24 to create a drum kit, but the 'edit' button isn't available. I have manually enabled 'Advanced Editing', but it still isn't available. How do I get to the edit window?

Yours doesn't look like this?
If not make sure Preferences:Advanced:Show Advanced Tools is checked, as well as Additional Options:Audio

Digital Editions will NOT open secured PDF

My PDF is secured with a permissions password, but does not require a password to open. But when I drag it into the ADE window, the dialogue box says "This version of Digital Editions does not support password-protected documents." I have ADE 1.7.2 on Windows 7 HP. Is there a way to open my secured PDF with ADE?

I have the exact same problem. When will Adobe fix this limitation?

New windows not opening in front of previous ones...

I do not know what happened, but at one point if I was on Safari and had a webpage open and then clicked a link to a new page, it would put the new page on "top" of the previous one(s) which makes sense. Now all of a sudden when I click a link or open a new page it pops up the previous page(s) and I have to close them to find the "buried" new page I want to see. <Edited by Moderator>
Thanks!
Casey

Did you check your preferences to see if they were correct? If you go to Preferences > Tabs, is the box that says "Select tabs and windows as they are created" checked? If not, check the box and then new windows should open in the foreground.
Mulder

External edit function not opening photo in external editor

Hi folks , hope you can help , my external editor function in lightroom 4 has stopped working ie It will open the external edit space but the image does not open in that space any ideas . Your help much appreciated

You cannot use iphoto that way. PSE can't open photos from iphoto because if it were to write to your iphoto library it could easily corrupt it and cause the loss of all the images there. You should NEVER poke around in the iphoto library from outside iphoto.
You have two choices:
1. Set PSE as your external editor and send the photos from iphoto. Save, not save as without changing the name or format and iphoto will remember your last saved edits and the original, but you will need to lose the edits to revert back to the original. You will need to go to the PSE preferences>saving files and set On First Save to Save over existing to make this work. When you see the Save As window, something is wrong.
2. Export the photos from iphoto, use file>open in the editor and make all the changes you want, then save your image in any format or with any name you like and import the edited photo back to iphoto as a new file. This lets you save as many versions of your photo as you like.

Popup window not opening in IE 6.0, SP1

Hi Friends,
Whats the version information for Popup windows to open.
Not able to view the popup window on Internet Explorer 6.0 , build 2800.1106, SP1.
It gives Runtime Error.
I can see the popup windows in IE6.0.2900.2180, SP2
any clue?
Thanks.
Message was edited by: Nav

Naveen,
Normally the browser should support the javascript version you are using. The best way is to upgrade the browser to higher SP if it runs on a different SP.
Usually, Javascript erros are very abstract, so tough to handle. So, got to be careful when coding.
Check this link for details on Javascript erros etc
http://www.irt.org/script/general.htm
Hope this helps,
Kumar

Script sub window not opening for particular invoice

Hi Experts,
I am facing problem in my invoice script.That is for some invoice the Script Write form Rstxc-Tdclose = X so it is directly coming out from the window after opening.
For two invoices only i am facing this problem.
Here that particular window is not displaying for some invoices.main window other windows are working fine.
Please,Give me some suggestions where the rstxc structure updated in write_form.
Regards,
Nandha

Nandha,
Is thhis related to BW ?
maybe the ABAP forum would be of better help..
Arun

Content window not opening in Firefox 11

Firefox 11.0. Windows XP. I open the options under tools. I can open all the tabs except for the 'content' window. I click on it and the last opened window (advanced or any others) stays. It will not open. Tried opening and closing the window and still nothing.
Any suggestions for getting the content window to open?
Thanks,
John

When I ran the following code, I got the expected result on Firefox 11.
<cfset qry_get_sale.email_header_html="Lorem ipsum dolor sit amet, consectetur adipiscing elit. Duis posuere felis quis massa blandit in luctus ante consectetur. Fusce odio libero, lacinia sed ullamcorper at, fringilla et arcu. Nulla ut libero id dui tempor blandit. Sed venenatis, enim imperdiet euismod pharetra, orci turpis pulvinar dolor, ut porttitor ante nunc id neque. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Vivamus dui nunc, posuere gravida auctor vel, tempus nec velit. Pellentesque sit amet felis risus.">
<cfset qry_get_sale.email_footer_html="Donec nec arcu vel leo dictum facilisis ut et arcu. Vivamus posuere purus ac turpis varius eu convallis enim sagittis. Cras imperdiet placerat nisi, sit amet facilisis tortor porttitor eget. Ut pulvinar ultricies lorem elementum elementum. Phasellus rutrum turpis quis ipsum fermentum in imperdiet risus venenatis. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Nam aliquet semper risus, eget laoreet eros sollicitudin quis. ">
<cfform>
<table>
<tr valign="top">
<td><cftextarea id="email_header_html" name="email_header_html" height="125" width="550" richtext="true" toolbar="Basic" wrap="virtual"><cfoutput>#qry_get_sale.email_header_html#</cfoutput>< /cftextarea></td>
</tr>
<tr valign="top">
<td><cftextarea id="email_footer_html" name="email_footer_html" height="150" width="550" richtext="true" toolbar="Basic" wrap="virtual"><cfoutput>#qry_get_sale.email_footer_html#</cfoutput>< /cftextarea></td>
</tr>
</table>
</cfform>

Edit will not open in Elements 12, organiser works fine

I Have just purchased Elements 12 and installed it on a laptop running Windows 7. It appeared to install without problems and the organiser section works fine, but the editor section will not open. I have changed the 'opening page' to all 3 different choices but the editor section will not open. Please advise what I can check to try to find the problem, including me!

Thank you for your advice, I have followed your instructions and SLCache and SLStore are now shown on the Desktop.
I then launched Elements from the icon on the desktop and the following message displayed:
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
http://www.adobe.com/support/
I have not uninstalled and reinstalled as I have done this previously and presumable it would put SLCache and SLStore back to their original location.
Have you any further suggestions?
Regards
Don

Java applet windows not opening in website

User is running Windows 7 Pro 64-bit with IE10. She connects to a secure government website and logs into it. Once logged in, she clicks a link which opens a small popup IE window. A short time later, a couple of other small popup windows are supposed to
open which are not IE windows but apparently java windows as the icon on the taskbar is the java icon and not the IE icon as for the main window and the first popup window. One of the java popup windows has links to click on to view various reports.
This user was having no problem performing the above. Then her PC had Office 2013 installed and she says some other updates though she has no idea what (I know IE was not updated). Since then, the java popup windows do not open, only the first IE popup window
opens.
She can go to other Windows 7 Pro computers with IE10 and has no problem with the site and the popup windows. She can also use an XP system with IE8 and has no problem.
I have disabled the popup blocker (though I was sure that wasn't the problem), installed JRE6u45 since she already had JRE7u45. I've tried to match her security and advanced settings to another PC. I've done a complete IE reset. None of these things have
worked.
I've never run into this type of problem before. I don't know if the problem is in IE or in Java or somewhere else. I'm really stumped on this one and I would appreciate suggestions as to where to look for the cause of this.
Jonathan

Hi Jonathan,
You could try to deselect the “Automatically Detect Settings” to check how it works.
And enable the scripting of Java applets settings:
1. Click "Tools" --> "Internet Options"
2. Next, select the Security Tab, and select the "Custom Level" button
3. Scroll down to "Scripting of Java applets"
4. Make sure the "Enable" radio button is checked.
5. Click OK to save your preference.
Or you could try to change the settings in group editor (win + R --> Run --> gpedit.msc --> ok):
Computer Configuration\Administrative Templates\Windows Components\Internet Explorer\Internet Control Panel\Security Page\Internet Zone\Java Permissions
Please also try to reinstall Java.
http://www.java.com/en/download/manual.jsp
In addition, I would like to suggest you try to use compatibility mode (go to tools --> Compatibility View Settings) to check the issue.
Meanwhile, I suggest you could reset the Internet Explorer to see if the issue persists.
http://support.microsoft.com/kb/923737
Please understand that reset Internet Explorer to its default configuration. This step will also disable any add-ons, plug-ins, or toolbars that are installed.
If the issue still occurs, I suggest you use process monitor to identify what is working/not working/identify what is blocking the use of Java/Java applets.
For your reference, you can download Process Monitor from the link below:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

OBN call : new window not opening

Hi,
I have one webdynpro application inside an iview in portal. Usually when I click a button in that application it should open a new window (done via OBN call). Now it fails to open a new window. I do not know why it is not opening. Is there any browser setting that forbids the open. But I am sure that no pop up blockers are there. Even I tried to open by holding the ctrl key and that too dint work.
pls help me. thanks in advance.
best regards,
suresh.

Hi,
if you can exclude popup blocker to prevent this from opening in the browser you probably need someone to look at a test case, which may be customer support.
Frank

Exs24 edit window not opening

Similar Messages

Maybe you are looking for