Exs24 not looping samples

Hi
I have just discovered that none of the samples in exs loop,even loaded a garageband french horn sound and it doesn't loop,I've looked in "edit" and all the samples have the loop box ticked,yet no they won't.I tried switching loop off then on again but to no avail.I'm on 9.02 and 10.6.2,and have been updating things recently.I have heard that other aspects of exs where not functioning as planed,but i haven't heard of this looping problem.
I'm open to suggestions!!
mike

Thanks for the relpy,yes i had checked one shot mode.I have done some more tests and it is only happening with virtual memory switched on,and with it on i get the samples cutting out(what i thought was not looping is actually the samples just stopping)My samples are stored on a seperate internal drive,If i choose a factory sample(stored on boot drive)it plays ok.The dive was brand new with the computer(not apple,3rd party) 6months old. Its never been a problem before,going to check other au's that have thier samples stored on that drive!!?.
mike

Similar Messages

Exs sampler need looped sample to play forever

I have made an exs instrument of 2 separate 1 measure arpeggiated keyboard lines that I have set to loop in EXS sampler on MS2.
I have the EXS set to Mono, and to Unison so that one looped sample will cancel out the other one, I have now assigned 2 drum triggers on my midi drum kit
to each be the note that each of the 2 samples are assigned to. I have the release,sustain,decay cranked all the way on the EXS sampler, however, my samples still slowly die out. Is there a way for me to make them play forever until I play the other sample or hit panic button?
as long as I hold the note it will play forever, however I want to be able to hit a trigger that's assigned to that note, and have it simply loop forever

ù
Is loop in EXS24 editor flagged? I think here around is your solution
• Loop On checkbox: Activate to enable looping and to allow access to the other Loop parameters.
• Loop Start, Loop End fields: Define discrete loop start and end points, allowing you to loop a portion of the audio file.
• Control-clickeitherfieldtoopenashortcutmenuthatallowsaccesstotheLogicPro Sample Editor (or an external editor). This enables you to set the loop start and end points graphically: Loop Start is represented by the LS marker and Loop End by the LE marker. See Editing Samples in the EXS24 mkII Sample Editor.

EXS24 Jazz Kit Samples

Help..
I've noticed that some of my exs kits has disappeared, like my Jazz kit. If I reinstall my Jam Pack DVD's, will that reinstate the missing files?
Thanks

Thanks for the relpy,yes i had checked one shot mode.I have done some more tests and it is only happening with virtual memory switched on,and with it on i get the samples cutting out(what i thought was not looping is actually the samples just stopping)My samples are stored on a seperate internal drive,If i choose a factory sample(stored on boot drive)it plays ok.The dive was brand new with the computer(not apple,3rd party) 6months old. Its never been a problem before,going to check other au's that have thier samples stored on that drive!!?.
mike

Why are animated gifs not looping

I can not understand why an animated gif set to loop twice does not loop at all. same file works in all other browsers.

This page explains the settings for that:
* http://kb.mozillazine.org/Firefox_:_Tips_:_Animated_Images

Flash swf in browser does not loop no matter what - bug?

Hello all!
http://www.adslgr.com
I have some banner ads in Flash (not mine, but from the
advertisers who have years of experience with flash) in my website
and unfortunately they do NOT loop no matter what I have tried!
They stop just before they finish the first loop.
When i load them on a browser locally they happily loop with
no problem, but if they are served from a web server then they
don't.
I have tried the following and nothing worked:
Removed the params in the object/embed tags
Tried it on many different browsers *and computers* some of
them are IE 6, IE 7, Firefox 2.0 etc
Decompiled the SWF to .fla source and reviewd the code and
found nothing wrong with actionscript
Added the loop param according to adobe instructions
And many more tests which mothing worked and it drives me
crazy!!
Please take a look at the website and you'll see this by
yourself, all of them are NOT looping EXCEPT the last one in the
bootm which has no problem at all.
Please help me out...

try this
http://www.google.com/search?client=safari&rls=en&q=flash+html+parameters&ie=UTF-8&oe=UTF- 8
loop
I believe is a param..
John Pattenden
Screentime Media - Flash Tools since 1997
http://www.screentime.com

Movie Clip is not looping AHH

So I got this video that is streaming from the server on the stage (starting a new movie clip). I then have a mask over it to create a diamond shaped movie clip. However, once I take it into the main timeline and export as movie...when I view it--it is not looping...it's only playing once. Any ideas on what's going on? THANKS!

I found the answer via http://www.kristenstephenson.net/?p=333&cpage=1#comment-259. Working code:
import fl.video.VideoEvent;
ksvid.autoRewind = true; // fl_video being the name of the video component
ksvid.addEventListener(VideoEvent.AUTO_REWOUND, doLoop);
function doLoop(e:VideoEvent):void
e.target.play();
The only difference from her way of placement was that because I have the f4v as a progressive download in a movie clip as a flash playback with a mask (*pheww)...I had to make a cuepoint at the end of the video and then place the actionscript within the movie clip as its own layer.
SUCCESS!

How do I get fancybox 2 to NOT loop?

I'm putting together a site that involves a lightbox (fancybox 2). It works great. One change I made for the client was in the CSS so that the previous and next arrows would be "visible" all the time, rather than only when hovering over the box. Seemed to make it more intuitive.
The thing I am now wondering is HOW can I change it so that when one OPENS the fancybox there will only be a NEXT arrow until the second (and subsequent) pictures open -- AND only be a PREVIOUS arrow when one gets to the end? In other words, how do I make it not loop back to the first picture? I went in the js file and changed loop to "false", but that didn't seem to do the trick.
Anyone here familiar with how to accomplish this?
Here's a link to the site. If you click on the fourth thumbnail and click through the pictures you will see what I mean. I'd like it to be one-directional, not circular or "looping" back to the first.
http://www.watercolorsplus.com/New/landscapes.html
Any help appreciated!
Dave

Perfect, Osgood. Thanks so much!
That's exactly what I'm looking for EXCEPT that I have previously added a "helper" to get the titles to display INSIDE the fancybox. I tried what you suggested on its own and it works exactly as I want. But how do I add it to what I already have (see script below, which includes the carouFredsel) so I can keep those captions or titles inside the box? I've tried placing it pretty much everywhere without success, but I'm sure it's just something simple that I'm not understanding.
I'm new to scripting and jQuery. When I finish this project for my client I want to dive into a book and learn jQuery. But for the time being any help would be greatly appreciated.
Also, notice my last bracket before the end script tag. Do I need that semicolon?
Dave
<script>
$(document).ready(function() {
$("#foo1").carouFredSel({
    circular: false,
    infinite: false,
    auto    : false,
    prev    : {
        button : "#foo1_prev",
        key     : "left"
    next    : {
        button : "#foo1_next",
        key     : "right"
    pagination : "#foo1_pag"
$(document).ready(function(){
$(".fancybox").fancybox({
    helpers: {
        title : {
            type : 'inside'
        overlay : {
            showEarly : false
</script>

Swf does not loop

So I have this AS3 animation, no AS, just timeline tween stuff. When I load it into Captivate, it will not loop. Yes, of course I clicked the loop property.
I also tried the Synchronize with project, and every combination of display time settings.
The animation runs until the frame time is over, then it stops, no loop.
Anybody run into this problem before?
Thanks

Hi there
You need to insert the animation into a MovieClip. Then insert the MovieClip into the timeline.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Not looping menu music

Is there a way to set the menu music to only play once, and not loop?

Let me know if any of these are helpful.
http://discussions.apple.com/thread.jspa?messageID=5229563&#5229563
http://discussions.apple.com/thread.jspa?messageID=6111044&#6111044
http://discussions.apple.com/thread.jspa?messageID=5744180&#5744180
http://discussions.apple.com/thread.jspa?messageID=5647978&#5647978

Why my program does not loop back during invalid input?

          boolean invalidNum = false;
                  //Questionnaire Number
                    do {
                    System.out.print("Enter Questionnaire Number [ ] ");
                      try
                           inputQuestionnAireNum = Integer.parseInt(input.nextLine());
                           if(inputQuestionnAireNum <0 || inputQuestionnAireNum>100){
                                System.out.print("Invalid: please enter between 1 to 100 \n");
                           } else {
                                invalidNum = true;
                      catch (NumberFormatException e)
                        System.out.print("Invalid try again \n");
                    } while (!invalidNum);
                    //Age input
                    do {
                         System.out.print("Enter Age [ ] ");
                           try
                                inputQuestionnAireNum = Integer.parseInt(input.nextLine());
                                if(inputAge <0 || inputAge>100){
                                     System.out.print("Invalid: please enter between 1 to 100 \n");
                                } else {
                                     invalidNum = true;
                           catch (NumberFormatException e)
                             System.out.print("Invalid try again \n");
                         } while (!invalidNum);
                    //Postal code
                    System.out.print("Enter Postal Code [ ] ");
                    inputPostCode = Integer.parseInt(input.nextLine());Result:
1 new entry or 0 print1
Enter Questionnaire Number [ ] w
Invalid try again
Enter Questionnaire Number [ ] 33
Enter Age [ ] w
Invalid try again
Enter Postal Code [ ]
why age input does not loop back and prompt for re-enter during invalid input ? instead it proceed to print the next line.

Apparently because you don't reset "invalidNum" after the first loop.
Your code would be a lot easier to read if you didn't use the word "invalid" to mean "valid".

Flash file not looping within Dreamweaver

I have toggled the loop "on" on Dreamweaver and made sure the file was looped in Flash as well. It will not loop. Is something wrong in the coding? Thanks for your help.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<link href="media_distinct css.css" rel="stylesheet" type="text/css" />
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="wrapper">
<div id="header">
    <ul id="mainNav" class="MenuBarHorizontal">
      <li><a href="index.htm" title="Our Home Page">Home</a></li>
      <li><a href="#" title="about us">About</a></li>
      <li><a href="reels.html" title="Video Examples">Reels</a></li>
      <li><a href="#" class="MenuBarItemSubmenu">Production</a>
        <ul>
          <li><a href="#">TV Ads</a></li>
          <li><a href="#">Corporate Marketing</a></li>
          <li><a href="#">Graphic Design</a></li>
          <li><a href="#">Web Design</a></li>
          <li><a href="#">Live Broadcast</a></li>
          <li><a href="#">Print</a></li>
          <li><a href="#">Wedding</a></li>
        </ul>
      </li>
      <li><a href="#">Consultation</a></li>
      <li><a href="#">Coming Up</a></li>
      <li><a href="#">Contact</a></li>
    </ul>
</div>
<div id="mainContent">
    <div id="videoReels">
      <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="474" height="625" id="FlashID" title="video reels">
        <param name="movie" value="summary reels.swf" />
        <param name="quality" value="high" />
        <param name="wmode" value="opaque" />
        <param name="swfversion" value="6.0.65.0" />
        
        <param name="expressinstall" value="Scripts/expressInstall.swf" />
        
        
        <object type="application/x-shockwave-flash" data="summary reels.swf" width="474" height="625">
          
          <param name="quality" value="high" />
          <param name="wmode" value="opaque" />
          <param name="swfversion" value="6.0.65.0" />
          <param name="expressinstall" value="Scripts/expressInstall.swf" />
          
          <div>
            <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
            <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
          </div>
          
        </object>
        
      </object>
    </div>
</div>
</div>
<script type="text/javascript">

</script>
</body>
</html>

Looping a Flash movie is done by design, not by some settings you make in the Publish Settings or the html embedding code. If you make sure that you have no stop(); commands at the end of the timeline in the Flash Movie then it will automatically loop. If the file does not use the timeline, but you instead have some component playing, such as a video or something, then you need to build in the controls that will detect the end of play of that component and reset it all to play again. You may need to head to the Flash forums to get help with this.

Frame by frame animation not looping

Hello,
This seems so simple but it's not working - I have two frames I want to continuously loop, they are of a person walking. I have put sym.play(0); at the end of the symbol timeline, but it is not looping. The sym.play(0); command is definitely working as I tested it with another transition in the same symbol, and this did loop. Can you not loop frame by frame animation?
Anyone got any ideas?
Cheers

Hi Darrell
Thanks for your reply, sorry can't really post it as it's a commercial project. They are 2 separate images, which become visible / hidden alternately to show each one after the other.
I've sort of solved my problem by just repeating this manually for now but would still be interested to know if looping is possible - however appreciate this may be tricky without the file.
Cheers
Sarah

EXS24 not found

When I try to put a software intrument in my project it says: "Logic Pro: Plug-in "EXS24" not available. How can I correct this.

This is usually down to missing instrument content.
Have you moved your Logic or Garageband content from the default locations?

HT4059 I purchased a book, not a sample, and the download only gave me the first 60 pages. What's wrong? JohNny

I purchased a book, not a sample, and the download only gave me the first 60 pages? Johnny

If I was you I would do a reset ie hold the sleep/wake and home buttons simultaneously until the Apple logo appears. If that didn't help I would then delete and redownload the book. If problems still persist contact Apple support:
https://getsupport.apple.com/LocaleChange.action

Z10 will not loop powerpoint slides?

Hey everyone:
I have a tradeshow tomorrow. I was hoping to setup a z10 to run a powerpoint. Works great, but, it is not looping back to the first slide.
HELP !!!
JMAC

jmac61 wrote:
Hey everyone:
I have a tradeshow tomorrow. I was hoping to setup a z10 to run a powerpoint. Works great, but, it is not looping back to the first slide.
HELP !!!
Played around with a pps, it only had 2 slides, during presentation swiping left and right would move between slides. Have you tried tapping the down volume button, whether it will move to previous or first slide.
If not you will have to press < and start from beginning, starting a presentation will default to first slide.
Touch and hold screen for pointer works great but haven't been able to find how to set timer.

Exs24 not looping samples

Similar Messages

Maybe you are looking for