EXS24 sampler, load your own samples?

Is it possible now to load your own samples (wav, aiff) in the exs24?

Hi,
yes, you can! In the upper right corner of the EXS24 main window (above the main volume knob) there's an edit button. Click on it, and the editor window pops up. In this window you can use your own samples to build a new patch. In Logic, click on Help > Logic 8 Instruments & Effects. A pdf file opens up, and on page 312 a section starts about creating your own patches. Tip: from page 275 of this "Instruments & effects" manual there's a general explanation of the EXS24.
Kind regards,
Jaap

Similar Messages

Loading your own videos on the Iphone

I was wondering if I can load my own videos onto my iPhone.
Is it possible? Is there a faq on how I can do it? I have a over seas TV series I would like to out on my Iphone. It's in AVI format. I aleady have a converter to conver the movies. I just need to know if draging the movie onto the Itunes will work?

If the video is in a quicktime format, you can drag it into itunes. Once it is in itunes you can click on it to highlight it, then click advanced at the top of itunes and choose convert for ipod.
Here is an article from the apple support website that might help out.
http://docs.info.apple.com/article.html?artnum=302892

Roll Your Own - APEX 4.0 and JQuery-UI Application

For those with a apex.oracle.com account and want to see jQeury tabs running via 4.0 in your own Workspace, use following this script to create your own version of Shijesh's (Apex_Noob) application.
Credit also goes out to Alistair Laing for his hard work in investigating why 4.0 is requiring the use of the googleapis jquery.js... libraries.
Application Builder - Create
Application Type - Database
Create Application - From Scratch
Name - jQuery Application
Add Page - keep default and Click Add Page
Click CreateMy application defaulted to Theme 2, you will need to switch the theme to one of the following: If you don't the tabs will not render properly.
8 Orange
10 Sand
13 Classic Blue
14 Simple Green
15 Light Blue
16 Dark Blue
18 Simple Gray
19 Red Gray
Message - Application created successfully.
Click Shared ComponentsUnder User Interface Click - ThemesIf you don't see one of the above Themes, you will need to Create and switch your Theme.
Click - CreateFrom the Repository selected Click - Next and select one of the above Themes
Click - Switch ThemeSelect one of the above Themes and Click - Next
Click -NextClick - Switch ThemeReturn to your newly created Application by Clicking on Application xxxxxxx Breadcrumb
Click - Create PageSelect - Blank PageClick - NextAssign the page a name
Click - NextAccept defaults and Click - NextClick - FinishClick - Edit PageI still work in Component View, to toggle to this View, click on the control adjacent to Page number and Go button. Hover over the ones on the far right and you will see both Component View and Tree View
From Component View
Click on the Page Edit Control
In the Text Area labeled Javascript/Execute when Page Loads - paste in the following code:
$x("tabs").appendChild( $x("tabs-1"));
$x("tabs").appendChild( $x("tabs-2"));
jQuery("#tabs").tabs();In the Text Area labeled HTML Header and Body Attribute/HTML Header - paste in the following code:
<link rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.1/themes/redmond/jquery-ui.css" type="text/css" />
<script src= "http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.1/jquery-ui.js"> </script>Click - Apply ChangesRequired use of the Google jqueryui libraries is being questioned by recent threads created by Alistair Laing since it appears that 4.0 does not currently support jQeury tabs
{thread:id=1083507}
{thread:id=1083540}
Create a Region
Type HTML Text - accept defaults
Provide a Title like "Tabs" and accept defaults
Template - Reports Region
Sequence 10
Click - NextIn the Enter HTML Text Region Source: Text Area - paste in the following code:
<div id="tabs">
<ul>
<li><a href="#tabs-1">Employees</a></li>
<li><a href="#tabs-2">Departments</a></li>
</ul>
</div>Click - Create RegionCreate a second Region
Type Report/Sql Report
Provide a Title like "Employees" and accept defaults
Template Reports Region
Sequence 20
Click - NextIn the Enter SQL Query or PL/SQL function returning a SQL Query: Text Area - paste in the following code:
SELECT empno,
       ename,
       job,
       mgr,
       hiredate,
       sal,
       comm,
       deptno
FROM   empClick - Create RegionEdit the newly created Report Region
Under Attributes/Static ID - paste in the following code:
tabs-1Click - Apply ChangesCreate a third Region
Type Report/Sql Report
Provide a Title like "Departments" and accept defaults
Template Reports Region
Sequence 30
Click - NextIn the Enter SQL Query or PL/SQL function returning a SQL Query: Text Area - paste in the following code:
SELECT deptno,
       dname,
       loc
FROM   deptClick - Create RegionEdit the newly created Report Region
Under Attributes/Static ID - paste in the following code:
tabs-2Click - Apply ChangesRun you page and you should see you tabs.
Jeff

Great post Jeff,
With regard to Jquery UI and tabs I've contacted the Apex dev team and received a reply from them.
All the jQueryUI files are included in the APEX 4.0 distribution, but not all jQueryUI components
are loaded by default to avoid a huge initial download. It's not necessary to load your own version of jQueryUI, just load the missing component.
For the "Tabs" you have to add
<link href="IMAGE_PREFIX#libraries/jquery-ui/1.8/themes/base/jquery.ui.tabs.css" rel="stylesheet" type="text/css" />
<script src="#IMAGE_PREFIX#libraries/jquery-ui/1.8/ui/minified/jquery.ui.tabs.min.js" type="text/javascript"></script>
to your page template or the header attribute of your page where you want to use it.They did not mention which other Jquery UI widgets were not included so people need to check to see if they get any JS errors Like "$('#tabs').tabs() is not a function" this would suggest that tabs is not being loaded. To included it in you page header directly after #HEAD# you need to place the css and js as stated above.
If you need jquery help just post you queries here or the is some other jquery links that maybe of some use
jQuery
http://jquery.com/ - Official jQuery Website
http://api.jquery.com/ - jQuery API Library
http://plugins.jquery.com/ - jQuery Plugins (Not APEX related)|
http://yayquery.com/ - yayQuery - jQuery Podcast
http://jqueryui.com/ - Official jQuery UI Website
http://jqueryui.com/demos/ - jQuery UI Demos
Edited by: Alistair Laing on Jun 9, 2010 4:04 PM
Add more links
Edited by: Alistair Laing on Jun 9, 2010 4:09 PM

Load my own music and Match music

Might be a daft question but can i load my own music onto my iPhien abnd still have Match in use?
i have some radio shows recorded i want to listen to. If i load them into iTunes and dont 'Match them', as its lots and they are long, can i then sync them into the iPhone without disturbuing the Match settings?

Yes, absolutely you can load your own music (as long as you obtained it legally; for example, from CDs you own).
It sounds like you've signed up for iTunes Match. Assuming that's true, iTunes Match may replace your music with the same tunes from the iTunes library, which may improve the fidelity of the music.
In any event, as long as you place legally obtained music into your library, iTunes Match will handle it properly and you will not lose anything.

I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated

I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

Can't load EXS24 Samples

Hi,
After wiping my drive I reinstalled Logic 7.1 (Install Disk and Content Disc). Since then I haven't been able to load my EXS24 instruments while in Logic. All the sample files show up in my project manager and in the finder (the default location: LIbrary/Application Support/Sampler Instruments) but whenever I try to load, say "Yamaha Grand Piano" in the EXS24 it tells me it can't find it. Any advice? Thanks so much!
j

When you say you are loading a sample, I presume you are not trying to load a sample using the EXS24?
If you are, you should read the EXS24 manual, because that is not how it works - the EXS24 directly loads "sampler instrument" files only, and it's those that contain references to all the sample files.
So you open the EXS editor, create a new instrument, load your samples into that, save it, and then select your instrument in the EXS24. Long-winded, but that's how it works.
Or did you mean something else?

How do I get rid of the EXS24 sample processing when I launch a project?

Whenever I launch a Logic project, I get a "Process" window that loads my EXS24 samples. This can be somewhat lengthy. I am using Logic 8 now, but this happened in Logic 7 as well; although, I don't remember it always being in place. Did I switch on a setting to do this for better performance or something? I really do feel as though I messed with a setting that loaded each EXS sample as opposed to streaming them off of my hard drive? Is this what I did? Can I switch it off? My computer is relatively capable still (G5 dual 2.7 running tiger with 6.5 gigs of RAM), so I should be okay with the streaming, right? thanks! I can't stand the awful processing anymore

lol no, but I am serious about this process thing. I don't remember when, but there was a time when that wouldn't happen, and it was great. Did I switch it on inadvertently?

Using an external Midi device to trigger an e.g. EXS24 Sampler

Hi
Firstly I have only used the EXS24 Sampler as an example with regards to what I would like to trigger - I basically want to find out how I can use an external Midi device to trigger anything other than the crappy sounds that Logic offers as an immediate option - I have some great soft synths like NI's "Massive" "Kore" and plenty of others that I would love to be able to trigger with my external Midi device however I can not figure out how to do this - Can any one help or advise???
Any help/info is welcome
All the best,
Al

Thousands of dollars spent on software (presumably) and you can't take time to read the manuals?
I don't understand how you can load the EXS24 and can't figure out how to do same with any softsynth.
Urrrgghh..

Why do some of my wav sample cd's not import into EXS24 sampler?

I read that you import sounds into the EXS24 sampler by dropping them into the sampler instruments folder located through the library>application support>logic> folders in the finder,anyway I have done this then opened logic created a EXS24 sampler and clicked the field where you load the sounds and I see the folder that I dropped into sampler instruments folder along with the standard factory sounds included with logic I open my samples folder to find a good few missing even though they are wav file which the EXS supports,Also some cds will have multiple files on them like rex aiff acid refill etc and the sampler will bring up the rex files which I cant use instead of the wavs Im really confused any help or solutions please!

Hi Fatal
I've got a video on my site showing how to build an exs instrument from raw samples. This video focuses on drums, so creating pitched instruments is slightly different but it may give you a start.
http://www.makemorenoise.org/logic/logics-plug-ins.html#BuildingadrumkitwithLogi cs
Hope that helps a little.
James

EXS24 Sampler

Just a quick question, i was wondering how do i add a bunch of samples i have in a folder to the exs24 sample list where it says 'Factory'.
many thanks for any help.

Open EXS - press the edit button - zone editor opens - open the sample folder in your finder - grab all the samples you want to import - drop them into the edit window in EXS - you will be asked which type of mapping you want - done!

Help! EXS24 samples are still missing

hi everyone. i've already posted this problem a few months ago. one day, my exs24 sample just disappeared. i've tried reinstalling but i still cant find the samples. please help me. it will be much appreciated!

Saw this problem for the first time last night. They are probably on your drive. I used spotlight to locate one I needed but stopped there....

List of EXS24 sampled instruments

Hi, does anyone know where I can get a list of the EXS24 sampler instruments (more than 1000) for LE 9 ? Also, is the EXS24 GM compatible yet for easy identification and selection of instruments for imported midi files? Thanks.

As far as the Jam Packs go, you can download the manuals from the support area. There are thousands of sounds and loops with Logic Studio. Many are searchable by Spotlight. Just have fun exploring.
jord

Default location of EXS24 sample files (not Sample Instruments)

I'm trying to copy a few selected EXS24 Sample Instruments (orchestral strings) from one Mac to another.
I know where the Sample Instruments are, but can't find the associated sample files.
Any idea where they are?
Thanks!

You can move them from teh default location to wherever you want.
Drag the iTunes folder from C:\Users\<username>\Music\iTunes\iTunes Music to
C:\Users\<username>\iTunes\iTunes Music.
Hold Shift and laucch iTunes then select *Choose existing library* and select the *iTunes library file* in the iTunes folder.

EXS24 sampler Instrument Editor Help, Logic pro X

When i open the EXS24 sampler in Logic pro X, the instrument edit tab is completely missing and won't open or respond at all. Can anyone offer assistance?

Hi
Make sure Preferences:Advanced:Show Advanced Tools is checked, and Additional Options:Audio
CCT

SQL Loader: using your own function

Hi,
Is it possible to include your own function in sql*loader? Would this be a correct syntax?
LOAD DATA
APPEND
INTO TABLE MY_TABLE
IDE "my_seq.nextval"
CLIENT_NBR POSITION (1:10) CHAR
CLIENT_TYP POSITION (11:12) "MY_PACKAGE.MY_FUNCTION(:CLIENT_TYP)"
)So the value of the data ( position 11:12) needs te be processed first by the function. The result of the function needs to be stored in the CLIENT_TYP column.
Thank you
Message was edited by:
Ratjeuh

still yes/yes after the edit?Yes :)

EXS24 sampler, load your own samples?

Similar Messages

Maybe you are looking for