Exs24 Source and Trigger Effect

Hey, I noticed in the exs, when you hit the pitch button and press a note down it glides from a lower note to reach the note you are hitting. I want to do the opposite. I want to hit a note and hold it steady, but when I let go, the Decay of the note detunes. Kinda like certain 808s, but not quite. Like if I held a pad down, it wold play the correct note, but as soon as I take my hands of the keys I want the notes to detune rather rapidly. Thanks!!! I used to know how to do this in Arturia, but its been a while

You'ld have to assign envelope 1 to Pitch.
Like so:
the sustain percentage is important. If you assign +1200 cents envelope to pitch, you have to use the tune knob to compensate down for that, so that the Pitch is correct during the *sustain phase* (holding down the keys) of the envelope.
In the example settings below, on release the pitch will fall 58% of an octave (=a fifth) during the complete release time. Of course, all these parameters can be automated as well. I just made this setting based on your question:
From the preset Grand Piano 1028 I have only tweaked the highlighted parameters.
In this setup (env to pitch at +1200, sustain at ±58 % and tune at -7), the pitch will fall a fifth on release.
Message was edited (several times) by: Eriksimon

Similar Messages

  • Shall we trigger two or more even Datatarget, Source and IP are same

    Hi,
    Shall we trigger two or more jobs even Datatarget, Source and IP are same.
    Kindly answer the same.
    Regards
    Priyanka Chowdary.

    Hi ,
    You can do it .
    let me explain with Info Package
    Info packages with Data Selection for same data source can be triggered at same time for which two different jobs will be created.
    Thanks
    Hari

  • Premiere and After Effects CS5.5 crash on startup

    I had been using Production Premium CS5.5 for a few months without any problems. Then there was a power outtage a couple nights ago and since then Premiere and After Effects crash whenever I try to open them. I get an error message like:
    Crash in progress. Last logged message was: <5980><AppDirs> <5> Required Dir = C:\Program Files\Adobe\Adobe After Effects CS5.5\Support Files\Required
    The rest of the programs still work fine. I reinstalled a few times, used the Cleaner tool and also tried some solutions on this page:http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html, but no luck.
    My last installation actually didn't give me any fatal errors or errors, but AE and Premiere still don't work.
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 0 error(s), 2 warning(s)
    ----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
    WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
    ----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
    WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging%20Area\windows\pb_app.ic o42178f80493091e8e552c84a2897e9da68fce32_32_f80493091e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    I'm using Windows 7 on a custom-built PC with i7-2600 processor and 16GB RAM, ASUS P8Z68-V/GEN 3 mobo, 560 Ti graphics card, 80GB Intel SSD for boot drive.
    Note: I actually planned on upgrading to a new 120GB SSD next week and doing a clean install, do you think that could also fix this problem?

    Browntimmy I would recommend posting in those product specific forums with your inquiry.  There is troubleshooting steps which can be employed for both products which are not install related.  The link to the forums is as follows:
    http://forums.adobe.com/community/aftereffects_general_discussion
    http://forums.adobe.com/community/premiere/premierepro_current

  • How much does Premiere Pro and After Effects rely on the hard drive it's installed on?

    This may be a really dumb question, but how much does Premiere Pro and After Effects rely on the hard drive it's installed on if all your video files, assets, disk cache, etc are on different drives than the one the program itself is installed on?
    The reason I am asking is that I currently have a "relatively" slow Sata II SSD for my C drive that has just my OS (windows 7 64bit) and programs (adobe editing programs, no games) installed on it and nothing else. All of the files used in my projects are saved on either a very fast Sata III SSD or a slower HDD depending on what the files are. For example, disk cache on the Sata III, stills on the HDD.
    Being cyber monday I have the opportunity to buy another very fast Sata III SSD to replace my current Sata II SSD C Drive (just OS and programs). Both synthetic and real world benchmarks show a near double in performance. I just want to know if anyone thinks the upgrade is even worth it because for all I know there won't be any increase in performance since no videos, still, cach, etc will be stored on the C Drive.
    The alternative is to get a second monitor because I currently only use one 21" monitor.
    I suppose another alternative would be to not buy anything on the cyber monday deals and just save money for something else.
    Any advice or input would be greatly appreciated. Thanks!

    Thanks Alex! I think you are right about not being able to notice the difference between the SSDs. I ended up finding a deal to get about $80 off a great monitor that I've been looking at for a while and decided to pull the trigger on it. I thought about it and realized that there have already been a bunch of times where I want to watch a tutorial on youtube and follow allong in AE or PrePro, but have to keep switching windows. I also frequently want to have my video preview on a separate monitor so I can have a taller timeline window. This monitor will help a lot with that. Thanks again for your help!

  • Logging with whereabouts using open source and freeware

    You can find the html version of this at:
    http://www.acelet.com/whitepaper/loggingWithWhereabouts.html
    Logging with whereabouts using open source and freeware
    The purpose of logging is to find out what had happened when needed. When the
    time comes to read log messages, you want to know both the log message and its
    whereabouts (class name, method name, file name and line number). So you need
    to hard code whereabouts.
    But hard coded whereabouts are very difficult to maintain: when you modify your
    source code, line number changes; when you copy and paste a line, its class name
    and method name change. If whereabouts are wrong, you introduce bugs in your logging
    logic and the log messages are useless at the best.
    This article shows you an example of using freeware Redress tool to rectify whereabouts
    programmatically in your Makefile or Ant build file. So your whereabouts are always
    correct for both Java and JSP source file.
    Redress tool is part of SuperLogging at http://www.ACElet.com. SuperLogging also
    provides an open source wrapper Alog.java, which redirects log method calls to
    your favorite logging package. Redress tool can rectify whereabouts information
    on all Alog's method calls in your application. So, if you call Alog's log methods,
    these calls will be rectified by Redress.
    JDK 1.4 introduces a new utility package java.util.logging. The example in this
    article is based on JDK logging. Log4J is a cousin of JDK logging. Log4J users
    should have no difficulties to modify this example for Log4J. Both JDK logging
    and Log4J are excellent logging software for single JVM.
    Note: Redress tool rectifies method calls on Alog, not JDK logging. You need to
    call Alog instead of JDK logging in your application.
    Source code of Alog.java
    The following is the source code of Alog's JDK logging version. It serves as an
    library file and should be on your CLASSPATH:
    * Copyright Acelet Corp. 2000. All rights reserved
    * License agreement begins >>>>>>>>>> <br>
    * This program (com.acelet.opensource.logging.Alog) ("Software") is an
    * open source software. <p>
    * LICENSE GRANT. The Software is owned by Acelet Corporation ("Acelet").
    * The Software is licensed to you ("Licensee"). You are granted a
    * non-exclusive right to use, modify, distribute the Software for either
    * commercial or non-commercial use for free, as long as: <br>
    * 1. this copyright paragraph remains with this file. <br>
    * 2. this source code (this file) must be included with distributed
    * binary code.<br>
    * NO WARRANTY. This comes with absolutely no warranty. <p>
    * <<<<<<<<<< License agreement ends <p><p>
    * The purpose of releasing this open source program is to prevent vendor
    * lock in. <p>
    * You can code your program using this class to indirectly use Acelet
    * SuperLogging (com.acelet.logging). If later you want to swith to other
    * logging package, you do not need to modify your program. All you have
    * to do is: <p>
    * 1. modify this file to redirect to other logging packages. <br>
    * 2. replace existing com.acelet.opensource.Alog with your modified one. <br>
    * 3. you may have to reboot your EJB server to make the changes effect.<br>
    * <p>
    * This program is just a wrapper. For detail information about the methods
    * see documents of underline package, such as com.acelet.logging.Logging.
    * <p>
    * Visit http://www.ACElet.com for more information.
    * <p>
    * This file is a modified for using JDK logging as an EXAMPLE.
    * <br>
    * You can use Redress tool to keep your whereabouts information
    * always correct. See http://www.ACElet.com/freeware for detail.
    * <p>
    * Please see http://www/ACElet.com/opensource if you want to see the
    * original version.
    package com.acelet.opensource.logging;
    import java.util.logging.*;
    public final class Alog {
    * Log level value: something will prevent normal program execution.
    public static int SEVERE = 1000;
    * Log level value: something has potential problems.
    public static int WARNING = 900;
    * Log level value: for significant messages.
    public static int INFO = 800;
    * Log level value: for config information in debugging.
    public static int CONFIG = 700;
    * Log level value: for information such as recoverable failures.
    public static int FINE = 500;
    * Log level value: for information about entering or returning a
    * method, or throwing an exception.
    public static int FINER = 400;
    * Log level value: for detail tracing information.
    public static int FINEST = 300;
    static Logger logger;
    static {
    logger = Logger.getLogger("");
    public Alog() {
    public static void alert(String subject, String message) {
    public static void error(String text, int level, String fullClassName,
    String methodName, String baseFileName, int lineNumber) {
    String[] para = {lineNumber + "", baseFileName};
    logger.logp(getLevel(level), fullClassName, methodName, text, para);
    public static Level getLevel(int levelValue) {
    if (levelValue == SEVERE)
    return Level.SEVERE;
    else if (levelValue == WARNING)
    return Level.WARNING;
    else if (levelValue == INFO)
    return Level.INFO;
    else if (levelValue == CONFIG)
    return Level.CONFIG;
    else if (levelValue == FINE)
    return Level.FINE;
    else if (levelValue == FINER)
    return Level.FINER;
    else if (levelValue == FINEST)
    return Level.FINEST;
    else
    return Level.ALL;
    public static void log(String text, int level, String fullClassName,
    String methodName, String baseFileName, int lineNumber) {
    String[] para = {lineNumber + "", baseFileName};
    logger.logp(getLevel(level), fullClassName, methodName, text, para);
    public static void sendMail(String to, String from, String subject,
    String text) throws Exception {
    public static void sendMail(String to, String cc, String bcc, String from,
    String subject, String text) throws Exception {
    Test program
    The simple test program is Test.java:
    import com.acelet.opensource.logging.Alog;
    public class Test {
    public static void main(String argv[]){
    Alog.log("Holle world", Alog.SEVERE, "wrongClassName", "wrongMethod",
    "wrongFileName", -1);
    How to run the test program
    1. Compile Alog.java (JDK 1.4 or later, not before):
    javac Alog.java
    2. Download freeware Redress tool from http://ACElet.com/freeware.
    3. Run Redress tool:
    java -cp redress.jar Test.java
    4. Check Test.java. The Alog.log method call should be rectified.
    5. Run test program:
    java Test
    You should see log message with correct class name and method name.

    Hi;
      I found this code and would like to share it with you :
    JCoDestination destination = JCoDestinationManager
      .getDestination(DESTINATION_NAME2);
      JCoFunction function = destination.getRepository().getFunction(
      "RFC_FUNCTION_SEARCH");
      if (function == null)
      throw new RuntimeException("RFC_FUNCTION_SEARCH not found in SAP.");
      function.getImportParameterList().setValue("FUNCNAME", "*");
      function.getImportParameterList().setValue("GROUPNAME", "*");
      try {
      function.execute(destination);
      JCoTable funcDetailsTable = function.getTableParameterList()
      .getTable("FUNCTIONS");
      int totalNoFunc = funcDetailsTable.getNumRows();
      if (totalNoFunc > 0) {
      for (int i = 0; i < totalNoFunc; i++) {
      System.out.println("Function Name: "
      + funcDetailsTable.getValue(i));
      } catch (AbapException e) {
      System.out.println(e.toString());
      return;
      System.out.println("RFC_FUNCTION_SEARCH finished");
    It is working and retrieving FM.
    Regards
    Anis

  • [svn] 3538: -Fix package names for Animate3D and Rotate3D effects as well as their instances .

    Revision: 3538
    Author: [email protected]
    Date: 2008-10-09 09:47:00 -0700 (Thu, 09 Oct 2008)
    Log Message:
    -Fix package names for Animate3D and Rotate3D effects as well as their instances.
    -added to manifest.xml and mxml-2009-manifest.xml so they would be included in the compile
    Ticket Links:
    http://bugs.adobe.com/jira/browse/mxml-2009
    Modified Paths:
    flex/sdk/trunk/frameworks/mxml-2009-manifest.xml
    flex/sdk/trunk/frameworks/projects/flex4/manifest.xml
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/Animate3D.as
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/Rotate3D.as
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/Animate3DInstance.a s
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/Rotate3DInstance.as

    From man pkgbuild:
    It is also possible to specify an optional filename, which is helpful with weird URLs and for handling multiple source files with the same name. The syntax is: source=('filename::url')

  • Quicktime Codecs/Compressors and After Effects?

    Hi,
    I have AE CS4, updated.Win XP SP 3 and 560ti Nvidia.
    I have a few questions regarding quicktime and after effects.
    I mostly render using quicktime and photo-jpeg as the compressor.But in the timelapse I shot, it is not giving me precise colors and the final movie is low on contrast.
    I tried animation codec, awesome but file size too large.I am rendering for stock footage where 1GB is maximum file size limit.
    My questions:
    1 - Will updating Quicktime update the compressor menu list under quicktime format in after effects render settings?Will updating also add new compressors, if any?
    2 - Where does quicktime store encoders/compressors if installed on C drive?
    3 - I saw many recommending DNxHD codec.I downloaded it.What next?Is it a quicktime compressor, i.e. to be used with quicktime as we use h.264, animation and photo-jpeg?
    4 - How do I add DNxHD codec to After Effects for use in renders?
    5 - Could you recommend the best lossless quicktime compressor which gives not so big file size as animation does?
    Currently I see 11 compressors in format options under quicktime.Are there more?I have the latest k-lite codec pack installed if that matters.
    Thank you.
    Would be greatful if you can explain, it will help me get clear on this.
    Thank you.And sorry if it is a very basic question.

    Hi, thanks for the replies.
    It is a timelapse footage and not animation file.I meant animation codec under quicktime format gives me the best results.I tried h.264 and photo-jpeg, but the final video looks flat and low on contrast.I have done some color grading and only animation and png renders it correctly.
    But the problem is that the file size is pretty huge.I also see banding in photo-jpeg and h.264 renders.
    I want to upload the timelapse to pond5 for sale.But photo-jpeg just gives me flat colors and flat contrast.
    Can you suggest a compression that maintains colors plus gives a size under 1GB?
    Photo-Jpeg render frame:
    https://dl.dropbox.com/u/42878955/1%20Photo%20-%20Jpeg.JPG
    Animation render frame:
    https://dl.dropbox.com/u/42878955/2%20Animation.JPG
    You can see how flat photo-jpeg looks.Also hasn't rendered the colors and contrast properly.
    Along with this, can you help me install DNxHD codec?I downloaded it and it has 2 folders, Source and TestFrames.What next?

  • Sources for random effects to use with FCE

    Any FCE users out there know of any good sources for random “effects” (not filters) and pre-made generic clips?
    Coming from iMoive I'm really excited about the improved control I have with FCE but it doesn’t have some of the generic effects I’m looking for like the 3-2-1 screen at the beginning of a video or overlays where it looks like the film is burning on the light…etc. I need some cool yet affordable plug-ins.
    Any help is appreciated!

    archive.org offers some downloadable count-downs ... in "historic" pic quality..
    with some painting skills, you're able to create your own in a paint-app and animate it in FCE ...
    search for video-libraries on the net, many offer (for $$) DVDs with zillions of usable "movies", fog, fire, water, animatics...
    lately, I stumbled here over
    http://fxhome.com/effectslab/effectslab-overview.html
    which allows creation of nice "particle" effects (smoke, fog, fire, bursts, ...)
    I'm too more a iM user.. like all these presets... in FCE, you have to think yourself, how is it done, how to set which knobs&sliders to achieve a special, wanted look... much more options, but much more complicated ..

  • Help needed regarding some open source and good media streaming server

    Hi
    I am searching for some open source and java based media streaming server which can facilitate live video streaming. Can anyone please suggest me some good streaming server.
    Thank you.

    Some observations:
    (1) The use of the Configuration.createRootApplicationModule() API is recommended only for console programs, not web applications, but it should work ok as long as your use of the appliation module is completely stateless (which from the code it looks like it is since you release the AM back to the pool on each request.)
    (2) You mention "Stateful" mode, but Configuration.createRootApplicationModule() only supports stateless mode, so you are effectively using Stateless mode.
    (3) You are passing true as the 2nd argument to Configuration.releaseRootApplicationModule() which means you are asking to immediately remove the application module instance from the pool. This will hurt the scalability of your application since each request will need to be served by creating a brand new instance of the application module.
    (4) You are explicitly calling disconnect(). This is not necessary.
    I would recommend:
    (1) Changing your 2nd argument to releaseRootApplicationModule() to false
    (2) Remove the explicit call to disconnect()
    (3) Given your usage pattern, I'd recommend calling viewobject.setForwardOnly(true) before calling viewobject.executeQuery() and iterating over the results. This will avoid any caching of the fetched view object results. Also ensure you've read section "27.2 Tuning Your View Objects for Best Performance" of the ADF Developer's Guide for Forms/4GL Developers guide on the ADF Learning Center at http://www.oracle.com/technology/products/adf/learnadf.html for more performance tips
    For example, if you are fetching 65 rows, make sure the fetch size of this view object is at least 66 so you can retried all the rows in one DB roundtrip.

  • Does iMovie have Sound and Video Effects?

    Before i begin filming my college film i wanted to ask and see if imovie has sound and video effects. what i mean is like, say in the film a gun is shot, well does imovie have a shot going off sound? are there sound effects? or am i asking in the wrong place and see if garageband has these?
    also, video effects? i know imovie has like sepia and black and white tones among others but can i add other types of effects? if so, what kinds?
    thanks!

    you're looking for specific effects for your specific needs.. why not launching iM on your MacBook.. and look for your own..???
    BEFORE doing a "serious" project, I would allway do some test/dummy projects, just to get comfortable with some software ...
    plus:
    the two additional audio tracks allow easiely to place small audio snippets, downloaded from anywhere in the web to your movie.. if you need explosions, gunshots, lightsabres, whatever, the iNet is full of sources...
    plus:
    you can teach iM lots of new tricks by installing/purchasing 3rd party plug-ins, if you need very special effects , iM does not support out-of-the-box.
    plus:
    http://www.apple.com/ilife/tutorials/imovie/index.html

  • Source and Preview monitor blank or displaying hidden windows

    In Premiere Pro CS4. Seemingly for no reason my source and prview monitors are no longer working. Instead of playing back the media they just display blank or whatever was on screen before changing focus back to CS4. For instance if I went to import a file and the explorer window opened up, once I closed it I would seem remnants of the explorer window where the Source Monitro should be, so it's obviously a glitch.
    Not sure why this is happening. I did a clean install of CS4, and even a full restore of the entire Windows OS and the problem persists. Interestingly I can run After Effects and it works just fine.
    Any ideas?
    Thanks

    Something like this is "usually" a graphics adapter problem
    What is your brand/model (nVidia... ATI... ???) and your device driver number?

  • I clicked on page source and deleted nodes with the web developer and the deletion has become permanent. Ebay won't load pictures. How to fix?

    The problem is on my desktop and my laptop. I got a bit click happy on my desktop computer and hit the Web Developer button. I was trying to delete a really annoying flash ad on the side of the screen. I think I got into page source and deleted the node. I'm truly not sure what happened, but pictures stopped loading for ebay and everything is a worded list down the side of the page. I have deleted cache and cookies. I have reset mozilla. I have uninstalled and reinstalled mozilla. Laptop was not immediately affected, but now having the same problem.

    This is a very strange issue.<br>
    No changes made with the web developer tool will save and should be cleared when the page is reloaded.
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back soon.

  • Is there a way to create a pan and zoom effect in a lightroom slideshow?

    Is there a way to create a pan and zoom effect in a lightroom slideshow?

    Nope. Be a great feature. For that I use FotoMagico after exporting JPEG's from LR.

  • What is difference between using interface as source and table as source?

    I am working on a batch flow which need several steps to populate data from source to target. For example, I need 5 interfaces to finish final data loading. I can either use interface or use temporary table as source and target for the interface 2, 3, and 4. It looks like both case will use tables no matter use interface or use temporary table. So my question is if there is any difference between these two (using interface as source or use temporary table as source)?
    Thanks

    if you use a Table as source for the intermediate process, it will create a physical temporary table i your work rep(depends on you choice) and populate the data into the table. if you use a interface as a source, just it will create a sub query instead of temporary table.
    Thanks
    nidhi

  • Create two or more data sources and mapping to DSO

    Hi,
    I´m using SAP Netweaver BI 7.0.
    If there are two or three data sources which have to be mapped to DSO which field from Data Sources has to be mapped to which field in DSO?
    Is it possible to have only one DSO or should it be three DSOs because of the three Data Sources?
    The thing is I have created one view out of three tables. For the view I have created one DSO. Everything worked fine. But now the requirements have changed because of currencies.
    The view I have created is now mixing currencies because in the view is only one currency field, which is filled from the three tables. Two tables have different currencies and one table has one currency.
    The one currency of the one table is important and should stay like it is.
    I´m thinking about something like three different currency key fields in DSO which are mapped from data source. Also for every field of data source mapping with corresponding field in DSO.
    Some hints? I have found articles in SDN about creating data sources and so on but they don´t help me in this matter.
    Thank you in advance!

    Thank you guys for explaining! I´m new to SAP BW and trying to better understand.
    I`ll try it also with the view. It sounds "easier".
    But if I´m doing it with the 3 data sources, that means that for each currency field of the data source I will need an corresponding currency field in the DSO for mapping.
    Is it possible to have 3 times the 0Currency field in the DSO and each data source currency field will be mapped to the DSO?
    If that would work the 0Currency has to be contained in the key figures.
    But if the 0Currency is contained in each key figure will the assignment of currency work correct?
    +For example:+
    Data Source1:
    Turnover in Euro.
    (All currency is in Euro)
    Data Source2:
    Profit in Dollar.
    Profit in Euro.
    Profit in Yen.
    Profit in different currencies available.
    Data Source3:
    Sales in Dollar.
    Sales in Euro.
    Sales in Yen.
    Sales in different currencies available.
    For mapping from DataSources to DSO if it is possible to have 3 times 0Currency in DSO:
    Data Source1 currency fiield ---> DSO 0Currency
    Data Source2 currency fiield ---> DSO 0Currency
    Data Source3 currency fiield ---> DSO 0Currency
    Does it make sense?

Maybe you are looking for

  • Unix commands in ABAP

    Hi,    I need to call the following unix command in ABAP to encrypt a file on the app server . crypt password <org filename> new_filename 1 But when i run it using call 'SYSTEM' .. i get message security risk , command not executed .. 2 I also create

  • Portugal VAT Declaration

    Hello Gurus, I have customized in transaction OBCH the tax code with the correct group number for tax amounts. For example, i have one tax code with the group 24, for one tax grouping version ( M002). When I go to execute the report S_AL0_96000738 -

  • Cluster Setup on 10.1.3

    Starting a seperate thread.... I am trying to setup a cluster on RHEL3 update 6 (with 10.1.3 OiAS) but have been unsuccessful so far, the two machines are in the same subnet, the firewall on both (iptables) has been opened for the multicast ip/port u

  • OPP Error Sorting on Function

    BI Publisher, Oracle Applications (EBS). In Microsoft Word (2003 SP3), I have Template Builder version 10.1.3.4, build 129. BI Publisher Server version, 5.6.3. I am trying to sort from within the template. Adding *<?sort:EMPLOYEE_NAME?>* does work. H

  • Larger fonts in Menu bar and title bars?

    I recently purchased an Intel Mac Mini for my mother. She does not have the greatest eyesight and I would like to increase the size of the font used in the menu bar, window title bar, etc.. In Windows there is a "large font" theme that does this very