Ext Mob Error code 9
When trying to log into extn mobility the user is getting "logon unsuccessful error:[9].
I have stop/start tomcat and iis and also reset password.
Had a good look around the Cisco docs and can find several other error codes but not this one.
This is on a ccm 4.1(3)sr3a.
Any input from you knowledgable people out there are greatly appreciated!!
Regards
Chris
Did not get round to trying the fix from the TAC case.
When I came back from leave the issue had been resolved by deleting and recreating the user profile.
Similar Messages
-
okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situationRead this.
-
Can't back-up to ext hard drive (Error code CE-37850-3)
Since the 2.55 update I haven't been able to back-up my saves to my external hard drive. I used to do this regularly as my online storage is full. Now when I try it I just get the error code CE-37850-3. Have tried unplugging and reconnecting the hard drive. Can anyone help?
hgwells wrote:
Leave the drive connected for a while (say 30 minutes), then try again. Am already doing this as I just leave the ext HD connected to the PS4 all the time, then at the end of a gaming session I back-up all the games I've played that day. My PS4 isn't even recognising the ext HD as when I click on USB storage to see what's on there I get the same error message. Never had these problems before this weeks update (2.55) Thanks for your reply anyway. -
Error Code U44M1I200 for Ext. Mgr. update attempt.
How do I update Adobe Extension Manager CS6 ver. 6.0.3.48? I got Error Code U44M1I200 after a group update attempt. Other products OK.
There are two ways to update Extension Manager:
1. Through Adobe Application Manager:
1). Open "Adobe Application Updates" from tray area of your computer desktop (there should be a red icon there). If you can't find the red icon, you can start up one CS product, e.g., DW or PS, then click "Help"->"Updates..." menuitem to open it.
2) The "Adobe Extension Manager CS6" should be listed and checked in the new window. You can uncheck other items if you don't want to update them. Click "Update" button to apply all selected updates.
2. Manual update:
Download http://download.macromedia.com/pub/dw_exchange/extension_manager/win/AdobeExtensionManager -6_0_4-mul-AdobeUpdate.zip (You can find the link in http://www.adobe.com/downloads/updates/), unzip it then run AdobePatchInstaller.exe to manually update Extension Manager. -
An unexpected error occurred (error code -50) when saving to ext HD.
I have an external USB Raid configured 2x3T config for a total of 3T of storage. It was working fine and now when I try to save to the hard drive I get: The operation can’t be completed. An unexpected error occurred (error code -50). Any suggestions? I have reset the PRAM, ran disk utility, restarted the computer, restarted the hard drive etc with no luck. Any suggestions would be appreciated because I cannot find any help on the internet.
Hello,
enum {
paramErr = -50, /*error in user parameter list*/
Not too helpful by itself, but can mean an unacceptable character in a filename like...
? / \\ < > " | > *
when copying to a FAT32 formatted drive or using SMB for file transfer. Can also be a Permissions problem, usually on the receiving end, & in the old days could happen if a file had forks...
http://support.apple.com/kb/TA20831
If using Time Machine...
Error -50...
http://pondini.org/TM/C10.html
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
I can't imagine anything TMwise not covered. -
Cannot write to external HD from MacBook. Error Code -36
Whenever I attempt to write to my Western Digital External HD (500 gb formatted HFS+m, USB 2.0 connection), I receive a Finder Error:
"The Finder cannot complete the operation because some data in "filename" could not be read or written. (Error code -36)
This happens just a little bit ago as I was transferring files over with intent to perform a back up >.< I was in the process of transferring one file when the error initially occurred. Had disk utility try to repair the disk, and it says the disk is fine. The knowledge base is...less than useful in regards to this. There was no power issue during transfer (MacBook was plugged in), nothing else except Safari was running for basic web browsing. I can pull information off of the drive just fine. I cannot add, however.
Any idea as to a solution for this?
Message was edited by: Lezard Valeth1Thanks for the reply, but unfortunately, most of those would not apply since its almost all files that are having issues. None of them are password protected, in use by system (as far as activity monitor tells me. Tried after several restarts to no avail, unplugging the Ext. HD from the system, etc). I removed non-standard formating (tried simple names).
I have noticed, however, that small files seem to copy; it's almost like it's having issues with the file size. Smaller files, for example, a 21.9 mb video I made, copy alright. Larger files do not.
I can copy off of the drive, but not onto the drive. There should be around 320 gb left on the drive. What I would like to do is reformat the Mac or the HD, but unfortunately, I don't have the storage space elsewhere to back up what is on the drive (tis why I downloaded it in the first place), and I need to back stuff up on my MacBook still, hence the attempts at writing to the drive. I could probably have my multimedia machine take some of the data from the Macbook, but I really would rather try to find a direct cause, if possible, for future reference and to see if this is going to be an ongoing issue. -
ERROR [code=1] Running adjopy.class
Hi DBA's
When i am applying patch 5903765 i got the following error.
i checked the write permission and owner permission, it seems everyting is fine and I run manually following script, i got the same error.
adjava -mx512m -nojit oracle.apps.ad.jri.adjcopy @/s03/CLONE/clnappl/admin/CLN/out/apps.cmd
Kindly help me to resolve the issue.
=============ERROR=============================
About to Write undo archive : Mon Mar 16 2009 14:22:33
Writing undo archive /s03/CLONE/kiranpatches/5903765/backup/CLN/aqherptestdb/java
ERROR: I/O or zip error while attempting to read entry meta-inf/jdev-ext.xml in zip file /s03/CLONE/clncomn/java
Error(s) have occurred; exiting with status 1
AD Run Java Command is complete.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
AutoPatch error:
ERROR [code=1] Running adjopy.class
AutoPatch error:
Error updating master archive
Best Regards,
SGSG,
Please review the following note:
Note: 376096.1 - I/O or ZIP Error While Attempting To Read Entry meta-inf/jdev-ext.xml
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=376096.1
Regards,
Hussein -
Hi all,
While working with Soap Adapter and when the pay load is more 2.7MB i am getting the below error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
The above error is raised only when the payload is moe ,if I send 1mb payload its working fine.
Any inputs would be helpful.
Thanks,
SrinivasaHi ...
Check out this part of the following blog : /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Hi,
what about the http response code 110.
I get lot of errors in SAP Exchange Infrastructure in SXI_MONITOR:
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when receiving by HTTP (error code: 110, error text: )</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any idea?
With kind regards.
Martin Steinberg
SXI_CACHE
2007-10-11 13:45:49 Marco Salazar SAP Employee Business Card [Reply]
to solve this try in the INTEGRATION_DIRECTORY_HMI destination put in the path field /dir/hmi_cache_refresh_service/ext
Query
Thanks,
Pooja Pandey -
Error Code: "The disc can't be burned because an unexpected error occurred (error code 0x8002006E).
I cannot burn items to a disc and get the following error code; "The disc can’t be burned because an unexpected error occurred (error code 0x8002006E)."
I appreciate any help in trying to figure this out."I also use the application "Clean My Mac" at least ounce a month to rid it of all unwanted or unneeded files, which also is supposed to keep my Mac running at optimum speed, just as a by-the-way."
There is your problem right there!!!
CleanMyMac is complete and total paid ""garbageware"!!!!
You may have irreparably damaged/corrupted and/or deleted important/needed system and OS X operational files using CleanMyMac.
You can try and use this uninstaller to completely uninstall CleanMyMac, but the damage to your system may have already happened and has been done
since you readily admit to using this garbageware regularly on your Mac.
Here is the proper way to uninstall both CleanMyMac and CleanMyMac2.
http://macpaw.com/support/cleanmymac-classic/knowledgebase/how-to-uninstall-clea nmymac-classic
http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2
Make sure which version of CleanMyMac you are using and pick the correct uninstaller.
Do you run any other so-called hard drive "maintenance" or "cleaning" apps or any type of commercial antivirus softwares?
If you do, you need to search the web to find out how to correctly and properly uninstall these types of apps.
You now may need to get yourself another external hard drive, purchase and use a data cloning app, such as CarbonCopyCloner or SuperDuper to create a exact bootable clone of your Mac's internal hard drive to a new external hard drive.
Then erase and reformat your boot drive and do a complete, clean reinstall of you OS X system, system and security updates as well as a complete reinstall of all of your applications and updates.
Let this be a very important lesson to you!
Apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac, MacCleanse or anything like these apps, installed on your Mac, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
Plus, these type of apps aren't really necessary OR needed. They really aren't.
There are manual methods to clear off unnecessary data off of your Mac that are safer and you have complete control over your Mac and not just leave a piece of auto cleaning software in charge of clearing off data off of your Mac. Their potential of causing OS X issues outweighs the implied good and benefits these types of hard drive or memory "cleaning" apps are written to do.
These types of system 'cleaning" apps are very poorly written and are really a scam to rob newbie and novice Mac users of their hard earned cash for a poorly written maintenance program that will do much more harm to a perfectly normal running OS X system than the good that the app developers purport these types of apps will do.
Plus, the software companies that write these apps make it hard to easily uninstall these apps if something DOES go wrong and these apps work in a way where you have no recovery or revert function to return your Mac back to its former, working state in the event something does go wrong.
It is best to never, EVER download and install these types of apps.
The risk to your system and important data is too great a risk!
Here is a proper and manual methodology to "cleaning" data off of your Mac.
Here are some general tips to keep your Mac's hard drive trim and slim as possible
You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your Mac's Trash icon in the Dock?
If you use iPhoto or Aperture, both have its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you are an iMovie user, iMovie has its own individual Trash location that needs to be emptied, too!
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
To find other large files, download an app called Omni Disk Sweeper.
http://www.omnigroup.com/more
Download an app called OnyX for your version of OS X.
http://www.titanium.free.fr/downloadonyx.php
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Moving iTunes library
http://support.apple.com/kb/HT1449
Moving iPhoto library
http://support.apple.com/kb/PH2506
Moving iMovie projects folder
http://support.apple.com/kb/ph2289
Good Luck! -
WSRP: Relative URL results in error code 404 in the consumer access.log
Hello everyone,
I deployed a JSF portlet(implemented in facelets) in Weblogic Server 10.3.2 (11g) [extended to support WSRP]. When the JSF portlet is consumed from a 'consumer' portal [Weblogic 10.3.2 portal], WSRP URL Rewrite results in error code 404 in the consumer portal access.log if the relative path (contextPath+resourcePath) of the javaScript resource is provided.
However, when the absolute path (protocol + serverName + port+ contextPath) of the JavaScript resource is provided, it works correctly:
works:
<script type="text/javascript" src="#{request.protocol}://#{request.serverName}:#{request.serverPort}#{request.contextPath}/resources/scripts/search/patientSearch.js"><!-- --></script>
Failed:
<script type="text/javascript" src="#{request.contextPath}/resources/scripts/search/patientSearch.js"><!-- --></script>
Any idea on what is causing the incorrect URL Rewrite?
The .xhtml and the portlet wsdl are listed below:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:a4j="http://richfaces.org/a4j"
xmlns:rich="http://richfaces.org/rich"
xmlns:nchic="http://www.saic.com/nchicago/jsf">
<ui:composition template="/WEB-INF/facelets/templates/page-protected.xhtml">
<head>
<title>not used</title>
<ui:define name="title">#{msgs.searchPageTitle}</ui:define>
<ui:define name="head">
<f:verbatim>
<style type="text/css">
#patientSearchContainer .pageCentered {
width: 800px;
#patientSearchFormInstructions {
padding: 10px 0px 10px 0px;
font-weight: bold;
font-size: 11px;
text-align: left;
.s-form-label {
width: 250px;
.s-form-input {
width: 450px;
</style>
</f:verbatim>
<script type="text/javascript" src="#{request.protocol}://#{request.serverName}:#{request.serverPort}#{request.contextPath}/resources/scripts/search/patientSearch.js"><!-- --></script>
</ui:define>
</head>
<body >
<ui:define name="body" >
<h:panelGroup id="patientSearchContainer"
layout="block"
style="text-align: center;">
<rich:panel id="patientSearchPanel"
styleClass="pageCentered"
header="#{msgs.searchPanelSearchTitle}">
<h:panelGroup id="patientSearchFormInstructions" layout="block">
<h:outputText value="#{msgs.searchInstructions}" />
<ul>
<li><h:outputText value="#{msgs.searchInstructions1}" /></li>
<li><h:outputText value="#{msgs.searchInstructions2}" /></li>
<li><h:outputText value="#{msgs.searchInstructions3}" /></li>
</ul>
</h:panelGroup>
<h:panelGroup id="errorPanel"
layout="block"
rendered="#{searchForm.hasMessages}">
<h:panelGroup layout="block"
style="padding: 5px;">
<h:outputFormat value="#{msgs.errorMultipleMessage}"
rendered="#{searchForm.errorCount > 1}">
<f:param value="#{searchForm.errorCount}" />
</h:outputFormat>
<h:outputFormat value="#{msgs.errorSingleMessage}"
rendered="#{searchForm.errorCount == 1}">
<f:param value="#{searchForm.errorCount}" />
</h:outputFormat>
<h:messages layout="list"
showSummary="false"
showDetail="true"
errorClass="errors"
styleClass="errorsList" />
</h:panelGroup>
</h:panelGroup>
<h:form id="patientSearchForm" prependId="false">
<h:panelGrid columns="2"
columnClasses="s-form-label,s-form-input"
summary="#{msgs.tableSummary}">
<nchic:label for="queryIdType"
value="#{msgs.labelIdType}"
required="false" />
<h:selectOneMenu id="queryIdType"
value="#{searchForm.criteria.identificationType}"
converter="patient.IdentificationType"
tabindex="2"
styleClass="masked-hidden not-required">
<f:selectItems value="#{searchForm.lists.allIdTypes}" />
<a4j:support event="onchange"
reRender="sponsorSearch,queryIdNumber"
oncomplete="JointReg.searchForm.patientIdTypeUpdateComplete();"
onsubmit="JointReg.searchForm.patientIdTypeUpdateSubmit();"
actionListener="#{searchForm.identificationTypeChangeListener}" />
</h:selectOneMenu>
<nchic:label for="sponsorSearch"
value="#{msgs.labelIdNumberRadios}"
required="false" />
<h:selectOneMenu id="sponsorSearch"
value="#{searchForm.criteria.sponsorSearch}"
tabindex="3"
disabled="#{searchForm.identificationDisabled}"
styleClass="masked-hidden not-required">
<f:selectItem itemValue="true" itemLabel="#{msgs.labelSponsor}" />
<f:selectItem itemValue="false" itemLabel="#{msgs.labelPatient}" />
</h:selectOneMenu>
<nchic:label for="queryIdNumber"
value="#{msgs.labelIdNumber}"
required="false" />
<h:inputText id="queryIdNumber"
converter="patient.IdentificationNumber"
value="#{searchForm.criteria.identificationNumber}"
tabindex="4"
styleClass="not-required resettable"
disabled="#{searchForm.identificationDisabled}"
maxlength="11" />
<nchic:label for="queryBirthDate"
value="#{msgs.labelBirthDateShort}"
required="false" />
<nchic:date id="queryBirthDate"
value="#{searchForm.criteria.birthDate}"
monthValues="#{searchForm.lists.allMonths}"
dayValues="#{searchForm.lists.allDays}"
yearValues="#{searchForm.lists.allYears}"
tabindex="5"
styleClass="masked-hidden not-required resettable" />
<nchic:label for="queryLastName"
value="#{msgs.labelLastName}"
required="false" />
<h:inputText id="queryLastName"
value="#{searchForm.criteria.lastName}"
tabindex="8"
maxlength="30"
styleClass="not-required resettable" />
<nchic:label for="queryFirstName"
value="#{msgs.labelFirstName}"
required="false" />
<h:inputText id="queryFirstName"
value="#{searchForm.criteria.firstName}"
tabindex="9"
maxlength="30"
styleClass="not-required resettable" />
<nchic:label for="queryGender"
value="#{msgs.labelGender}"
required="false" />
<h:selectOneMenu id="queryGender"
value="#{searchForm.criteria.gender}"
converter="patient.Gender"
tabindex="10"
styleClass="masked-hidden not-required resettable">
<f:selectItems value="#{searchForm.lists.allGenderTypes}" />
</h:selectOneMenu>
</h:panelGrid>
<h:panelGroup layout="block" style="text-align: center">
<h:panelGroup layout="block"
style="padding-top: 15px; margin-left: auto; margin-right: auto;">
<h:commandButton action="#{searchForm.searchAction}"
value="#{msgs.buttonSearch}"
styleClass="s-button"
tabindex="11"
onclick="jQuery(document.body).mask('Searching...');" />
<rich:spacer width="10" />
<h:commandButton type="button"
styleClass="s-button"
onclick="return JointReg.searchForm.resetSearchForm();"
tabindex="12"
value="#{msgs.buttonClearSearch}" />
<rich:spacer width="100" />
<h:commandButton action="#{searchForm.createJohnDoeAction}"
styleClass="s-button"
onclick="jQuery(document.body).mask('Registering...');"
tabindex="13"
value="#{msgs.buttonJohnDoe}" />
</h:panelGroup>
</h:panelGroup>
</h:form>
</rich:panel>
</h:panelGroup>
</ui:define>
</body>
</ui:composition>
</html>
WSDL:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
- <s0:definitions xmlns:s0="http://schemas.xmlsoap.org/wsdl/" xmlns:s1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:s2="urn:oasis:names:tc:wsrp:v1:bind" xmlns:s3="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s4="urn:bea:wsrp:ext:v1:bind" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" targetNamespace="urn:oasis:names:tc:wsrp:v1:wsdl">
<import location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-2.0/markup?WSDL" namespace="urn:oasis:names:tc:wsrp:v2:wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" />
<s0:import location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/markup?WSDL/wlp_wsrp_v1_bindings.wsdl" namespace="urn:bea:wsrp:ext:v1:bind" />
<s0:import location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/markup?WSDL/wsrp_v1_bindings.wsdl" namespace="urn:oasis:names:tc:wsrp:v1:bind" />
<wsp:UsingPolicy s0:Required="true" />
- <wsp:Policy s1:Id="ProducerDefaultPolicy">
- <wsp:All>
- <wssp:Identity xmlns:wssp="http://www.bea.com/wls90/security/policy">
- <wssp:SupportedTokens>
- <wssp:SecurityToken TokenType="http://docs.oasis-open.org/wss/2004/01/oasis-2004-01-saml-token-profile-1.0#SAMLAssertionID">
- <wssp:Claims>
<wssp:ConfirmationMethod>sender-vouches</wssp:ConfirmationMethod>
</wssp:Claims>
</wssp:SecurityToken>
</wssp:SupportedTokens>
</wssp:Identity>
</wsp:All>
</wsp:Policy>
- <s0:service name="WSRPService">
- <s0:port binding="s2:WSRP_v1_Markup_Binding_SOAP" name="WSRPBaseService">
<s3:address location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/markup" />
</s0:port>
- <s0:port binding="s2:WSRP_v1_ServiceDescription_Binding_SOAP" name="WSRPServiceDescriptionService">
<s3:address location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/serviceDescription" />
</s0:port>
- <s0:port binding="s4:WLP_WSRP_v1_Markup_Ext_Binding_SOAP" name="WLP_WSRP_Ext_Service">
<s3:address location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-wlp-ext-1.0/markup" />
</s0:port>
</s0:service>
</s0:definitions>did you publish the internetserive "<b>bbpstart</b>" to site internal?
Regards
Raja -
Upload external cap file: jcshell: Error code: 6a80 (Wrong data)?
Hi,
i use eclipse + NXP JCOP Plugins_Generic3.2.8_Target ,the card is jcop31v232.
if the cap file is generated by eclipse project , when i upload exteral cap file ,no error
but if the cap file is generated by converter command ,there is error
what error?help me
cm> /terminal "winscard:4|Feitian R502 Contact Reader 1"
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManager
resetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B FA 13 00 00 81 31 FE 45 4A 43 4F 50 33 31 56 ;.....1.EJCOP31V
32 33 32 93 232.
IOCTL().
ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP31V232"> => 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(104154 usec)
<= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65 oe...........Y.e
01 FF 9F 6E 06 47 91 73 51 2E 00 73 4A 06 07 2A ...n.G.sQ..sJ..*
86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B .H..k.`...*.H..k
02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64 ....c...*.H..k.d
0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09 ...*.H..k...e...
2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01 +...Hd...f...+..
04 01 2A 02 6E 01 02 90 00 ..*.n....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 A7 C7 04 88 8C 87 3F DE 00 .P.........?..
(68417 usec)
<= 00 00 93 36 01 29 05 95 13 05 FF 02 00 5F E1 48 ...6.)......._.H
67 60 FD 2F 89 FF AD A4 72 B4 17 E9 90 00 g`./....r.....
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 17 6D 1C 2A 87 9E 0A 24 3F 15 83 ......m.*...$?..
A4 84 10 C0 75 ....u
(71713 usec)
<= 90 00 ..
Status: No Errorh1.
cm> upload -d "D:\JCIDE_workspace\hello\hello\javacard\hello.cap"
=> 80 E6 02 00 12 05 A0 00 01 00 62 08 A0 00 00 00 ..........b.....
03 00 00 00 00 00 00 00 ........
(56499 usec)
<= 00 90 00 ...
Status: No Error
=> 80 E8 00 00 FF C4 82 01 A1 01 00 0F DE CA FF ED ................
01 02 04 00 01 05 A0 00 01 00 62 02 00 1F 00 0F ..........b.....
00 1F 00 0B 00 15 00 2E 00 0C 00 63 00 17 00 12 ...........c....
00 00 00 6F 00 02 00 01 00 0A 02 01 00 04 00 15 ...o............
02 03 01 07 A0 00 00 00 62 01 01 00 01 07 A0 00 ........b.......
00 00 62 00 01 03 00 0B 01 07 A0 00 01 00 62 03 ..b...........b.> 01 00 08 06 00 0C 00 80 03 00 FF 00 07 01 00 00 ................
> 00 1C 07 00 63 00 01 10 18 8C 00 00 7A 05 30 8F ....c.......z.0.
> 00 01 3D 8C 00 02 18 1D 04 41 18 1D 25 8B 00 03 ..=......A..%...
> 7A 02 21 18 8B 00 04 60 03 7A 19 8B 00 05 2D 1A z.!....`.z....-.
> 04 25 75 00 10 00 01 00 30 00 09 18 19 8C 00 06 .%u.....0.......
> 70 08 11 6D 00 8D 00 07 7A 05 21 19 8B 00 05 2D p..m....z.!....-
> 7B 00 08 03 1A 03 7B 00 08 92 8D 00 09 3B 19 03 {.....{......;..
7B 00 08 92 8B 00 0A 7A 08 00 17 00 02 00 01 00 {......z........
01 03 00 0A 48 65 6C 6C 6F 57 6F 72 6C 64 00 00 ....HelloWorld..> 00 00 05 00 2E 00 0B 06 80 03 00 01 00 00 00 06 ................
> 00 00 01 03 00 .....
>(1200 msec)
<= 6A 80 j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80thank you. I use jcdk 2.2.1,jcop31v232 supports jc2.2.1 and gp2.1.1
And i can not understand this:
your jcop card is not a javacard v3 card.
cm> /cap-info -p "D:\JCIDE_workspace\hello\hello\javacard\hello\hello" "D:\JCIDE_workspace\hello\hello\javacard\hello.cap"
jcshell: Cannot read file <D:\JCIDE_workspace\hello\hello\javacard\hello.cap>: Incomplete CAP file, missing mandatory component: Header.capbut there is Header.cap in hello.cap:
hello/javacard/Header.cap :
01 00 13 de ca ff ed 01 02 04 00 01 09 a0 00 01
00 62 03 01 0c 02 -
Preverification failed with error code 1. BUILD FAILED
Hallo Oracle,
Am learning my first J2me application and when i build it am getting this error. can some one help me understand what it means
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Copying 1957 files to C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified
Preverifying 1957 file(s) into C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified directory.
Error preverifying class com.sun.activation.registries.MailcapFile
VERIFIER ERROR com/sun/activation/registries/MailcapFile
.<init>(Ljava/lang/String;)V:
Cannot find class java/util/Map
C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\nbproject\build-impl.xml:431: Preverification failed with error code 1.
BUILD FAILED (total time: 25 seconds)
this is the contents of build-impx.xml
<?xml version="1.0" encoding="UTF-8"?>
<!-- *** GENERATED FROM project.xml - DO NOT EDIT *** -->
<project name="watsdownapp-impl" default="jar" basedir="..">
<!--load-properties-->
<target name="pre-load-properties">
<property file="nbproject/private/private.properties"/>
<property name="user.properties.file" location="${netbeans.user}/build.properties"/>
<available property="user.properties.file.exists" file="${user.properties.file}"/>
</target>
<target name="exists.config.active" unless="config.active">
<echo level="warning" message="Active configuration (config.active property) is not set - using default."/>
<property value="" name="config.active"/>
</target>
<target name="exists.netbeans.user" unless="netbeans.user">
<echo level="warning" message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically."/>
</target>
<target name="exists.user.properties.file" unless="user.properties.file.exists">
<echo level="warning" message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)."/>
</target>
<target name="load-properties" depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file">
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
<concatfilter prepend="nbproject/project.properties"/>
<containsregex pattern="^platform.active=|^deployment.method=|^deployment.instance="/>
</filterchain>
</loadproperties>
<property name="deployment.instance" value="default"/>
<loadproperties srcfile="${user.properties.file}">
<filterchain>
<replaceregex pattern="^platforms\.${platform.active}\." replace="platform."/>
<replaceregex pattern="^deployment\.${deployment.method}\.scriptfile=" replace="deployment.scriptfile="/>
<replaceregex pattern="^deployments\.${deployment.method}\.${deployment.instance}\.([^=]+)=" replace="\1="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
<concatfilter prepend="nbproject/project.properties"/>
</filterchain>
</loadproperties>
</target>
<!--basic-init-->
<target name="exists.platform.active" unless="platform.active">
<echo level="warning" message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)."/>
</target>
<target name="exists.platform.configuration" unless="platform.configuration">
<echo level="warning" message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration."/>
<property name="platform.configuration" value="CLDC-1.0"/>
</target>
<target name="exists.platform.profile" unless="platform.profile">
<echo level="warning" message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile."/>
<property name="platform.profile" value="MIDP-1.0"/>
</target>
<target name="basic-init" depends="exists.platform.active,exists.platform.configuration,exists.platform.profile">
<fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-mobility-antext.jar file in the IDE installation directory.</fail>
<fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
<fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
<fail unless="src.dir">Must set src.dir</fail>
<fail unless="build.dir">Must set build.dir</fail>
<fail unless="dist.dir">Must set dist.dir</fail>
<fail unless="dist.jar">Must set dist.jar</fail>
<property name="javac.source" value="1.3"/>
<property name="javac.target" value="1.1"/>
<property name="javac.encoding" value="${file.encoding}"/>
<property name="deployment.number" value="0.0.1"/>
<property name="deployment.counter" value="000002"/>
<condition property="no.deps">
<istrue value="${no.dependencies}"/>
</condition>
<condition property="no.preprocess">
<isfalse value="${use.preprocessor}"/>
</condition>
<condition property="no.javadoc.preview">
<isfalse value="${javadoc.preview}"/>
</condition>
<condition property="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes},**/*Test.java,**/test,**/test/**">
<istrue value="${filter.exclude.tests}"/>
</condition>
<property name="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes}"/>
<condition property="deployment.do.override.jarurl" value="">
<istrue value="${deployment.override.jarurl}"/>
</condition>
<condition property="config.active.name" value="DefaultConfiguration">
<length string="${config.active}" trim="true" length="0"/>
</condition>
<property name="config.active.name" value="${config.active}"/>
<taskdef resource="org/netbeans/mobility/antext/defs.properties">
<classpath>
<pathelement path="${libs.j2me_ant_ext.classpath}"/>
</classpath>
</taskdef>
<condition property="skip.deployment">
<equals arg1="${deployment.method}" arg2="NONE" casesensitive="false" trim="true"/>
</condition>
<condition property="app-version.autoincrement.trigger">
<istrue value="${app-version.autoincrement}"/>
</condition>
<condition property="debug.timeout" value="30000">
<or>
<equals arg1="${debugger.timeout}" arg2="" trim="true"/>
<not>
<isset property="debugger.timeout"/>
</not>
</or>
</condition>
<property name="debug.timeout" value="${debugger.timeout}"/>
<nb-overrideproperty name="buildsystem.baton" value="${src.dir}"/>
</target>
<!--cldc-init-->
<target name="cldc-pre-init">
<condition property="cldc-platform.trigger">
<equals arg1="CLDC" arg2="${platform.trigger}" casesensitive="false"/>
</condition>
</target>
<target name="cldc-init" depends="cldc-pre-init" if="cldc-platform.trigger">
<property name="preverify.sources.dir" location="${build.dir}/preverifysrc"/>
<property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
<property name="platform.device" value=""/>
<property name="dist.jad.url" value="file://"/>
<property name="run.cmd.options" value=""/>
<condition property="evaluated.run.security.domain" value="">
<isfalse value="${run.use.security.domain}"/>
</condition>
<property name="evaluated.run.security.domain" value="${run.security.domain}"/>
<condition property="override.jarurl.trigger">
<and>
<istrue value="${cldc-platform.trigger}"/>
<istrue value="${deployment.override.jarurl}"/>
</and>
</condition>
<property name="deployment.jad" location="${dist.dir}/${dist.jad}"/>
<property name="deployment.jar" location="${dist.dir}/${dist.jar}"/>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="${dist.jad}"/>
<include name="${dist.jar}"/>
</patternset>
</target>
<!--cdc-init-->
<target name="cdc-init">
<condition property="cdc-platform.trigger">
<equals arg1="CDC" arg2="${platform.trigger}" casesensitive="false"/>
</condition>
<available file="${manifest.file}" property="manifest.available"/>
<condition property="main.class.applet">
<equals arg1="${main.class.class}" arg2="applet" casesensitive="false"/>
</condition>
<condition property="main.class.xlet">
<equals arg1="${main.class.class}" arg2="xlet" casesensitive="false"/>
</condition>
<condition property="manifest.available+main.class+fat.jar">
<and>
<isset property="manifest.available"/>
<isset property="main.class"/>
<istrue value="${platform.fat.jar}"/>
<not>
<equals arg1="${main.class}" arg2="" trim="true"/>
</not>
</and>
</condition>
<condition property="manifest.available+main.class">
<and>
<isset property="manifest.available"/>
<isset property="main.class"/>
<isfalse value="${platform.fat.jar}"/>
<not>
<equals arg1="${main.class}" arg2="" trim="true"/>
</not>
</and>
</condition>
<condition property="application.version.invalid" value="true">
<equals arg1="${deployment.number}" arg2="" trim="true"/>
</condition>
<fail if="application.version.invalid" message="Property deployment.number must not be empty and must contain version in format %d.%d.%d!"/>
<condition property="sign.jar.trigger" value="true">
<and>
<isset property="cdc-platform.trigger"/>
<istrue value="${sign.enabled}"/>
</and>
</condition>
</target>
<!--semc-init-->
<target name="semc-pre-init" if="cdc-platform.trigger">
<condition property="semc-platform.trigger">
<equals arg1="semc" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="semc-init" depends="semc-pre-init" if="semc-platform.trigger">
<condition property="semc.icon.invalid" value="true">
<or>
<contains string="${semc.application.icon}" substring="$${"/>
<equals arg1="${semc.application.icon}" arg2="" trim="true"/>
</or>
</condition>
<condition property="no.certificateorkey" value="true">
<or>
<isset property="no.application.uid"/>
<equals arg1="${semc.certificate.path}" arg2="" trim="true"/>
<contains string="${semc.certificate.path}" substring="$${semc.certificate.path"/>
<equals arg1="${semc.private.key.path}" arg2="" trim="true"/>
<contains string="${semc.private.key.path}" substring="$${semc.private.key.path"/>
</or>
</condition>
<property name="j9.dist" location="${build.dir}/j9/${semc.application.uid}.j9"/>
<taskdef resource="org/netbeans/modules/j2me/cdc/project/defs.properties">
<classpath>
<pathelement path="${libs.cdc-ant-utils.classpath}"/>
</classpath>
</taskdef>
<taskdef resource="org/netbeans/modules/j2me/cdc/project/semc/defs.properties">
<classpath>
<pathelement path="${libs.semc-ant-utils.classpath}"/>
</classpath>
</taskdef>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="*.sis"/>
<include name="*.SIS"/>
</patternset>
</target>
<!--savaje-init-->
<target name="savaje-pre-init" if="cdc-platform.trigger">
<condition property="savaje-platform.trigger">
<equals arg1="savaje" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="savaje-init" depends="savaje-pre-init" if="savaje-platform.trigger">
<property name="savaje.application.uid" value="TBD"/>
<condition property="savaje.bundle.base.invalid" value="true">
<or>
<equals arg1="${savaje.bundle.base}" arg2="" trim="true"/>
<contains string="${savaje.bundle.base}" substring="$${savaje.bundle.base"/>
</or>
</condition>
<condition property="savaje.unsupported.main" value="true">
<or>
<equals arg1="${main.class.applet}" arg2="true"/>
</or>
</condition>
<condition property="savaje.icon.invalid" value="true">
<or>
<isset property="no.application.uid"/>
<contains string="${savaje.application.icon}" substring="$${"/>
<equals arg1="${savaje.application.icon}" arg2="" trim="true"/>
</or>
</condition>
<property name="jnlp.dist" value="${build.dir}/jnlp/bundle.jnlp"/>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="bundle.jnlp"/>
<include name="bundle.policy"/>
<include name="lib/*"/>
</patternset>
</target>
<!--sjmc-init-->
<target name="sjmc-pre-init" if="cdc-platform.trigger">
<condition property="sjmc-platform.trigger">
<equals arg1="sjmc" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="sjmc-init" depends="sjmc-pre-init" if="sjmc-platform.trigger"/>
<!--ojec-init-->
<target name="ojec-pre-init" if="cdc-platform.trigger">
<condition property="ojec-platform.trigger">
<equals arg1="ojec" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="ojec-init" depends="ojec-pre-init" if="ojec-platform.trigger"/>
<!--cdc-hi-init-->
<target name="cdc-hi-pre-init" if="cdc-platform.trigger">
<condition property="cdc-hi-platform.trigger">
<equals arg1="cdc-hi" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="cdc-hi-init" depends="cdc-hi-pre-init" if="cdc-hi-platform.trigger"/>
<!--nokiaS80-init-->
<target name="nokiaS80-pre-init" if="cdc-platform.trigger">
<condition property="nokiaS80-platform.trigger">
<equals arg1="nokiaS80" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="nokiaS80-init" depends="nokiaS80-pre-init" if="nokiaS80-platform.trigger">
<property name="j9.dist" location="${build.dir}/j9/NOKIA.j9"/>
<property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
<condition property="nokia.icon.invalid">
<or>
<contains string="${nokiaS80.application.icon}" substring="$${"/>
<equals arg1="${nokiaS80.application.icon}" arg2="" trim="true"/>
</or>
</condition>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="${dist.jar}"/>
</patternset>
</target>
<!--init-->
<target name="pre-init"/>
<target name="post-init"/>
<target name="init" depends="pre-init,load-properties,basic-init,cldc-init,cdc-init,semc-init,savaje-init,sjmc-init,ojec-init,cdc-hi-init,nokiaS80-init,post-init"/>
<!--conditional clean-->
<target name="conditional-clean-init">
<uptodate property="no.clean.before.build" targetfile="${build.dir}/.timestamp">
<srcfiles dir="nbproject">
<include name="project.properties"/>
<include name="build-impl.xml"/>
</srcfiles>
</uptodate>
</target>
<target name="conditional-clean" depends="init,conditional-clean-init" unless="no.clean.before.build" description="Clean project in case its meta information has changed.">
<antcall target="do-clean" inheritall="true" inheritrefs="true"/>
</target>
<!--deps-jar-->
<target name="deps-jar" depends="conditional-clean" unless="no.deps"/>
<!--preprocess-->
<target name="pre-preprocess"/>
<target name="do-preprocess" unless="no.preprocess">
<fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
<property name="abilities" value=""/>
<property name="debug.level" value="debug"/>
<mkdir dir="${preprocessed.dir}"/>
<echo message="ignore me" file="${build.dir}/.timestamp"/>
<nb-prep destdir="${preprocessed.dir}" preprocessfor="${config.active.name},${abilities},DebugLevel=${debug.level}" encoding="${javac.encoding}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated}"/>
</nb-prep>
<copy todir="${preprocessed.dir}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
</copy>
<nb-overrideproperty name="buildsystem.baton" value="${preprocessed.dir}"/>
</target>
<target name="post-preprocess"/>
<target name="preprocess" depends="deps-jar,pre-preprocess,do-preprocess,post-preprocess" description="Preprocess project sources."/>
<!--compile-->
<target name="pre-compile"/>
<target name="do-compile">
<fail unless="build.classes.dir">Must set build.classes.dir</fail>
<mkdir dir="${build.classes.dir}"/>
<javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" destdir="${build.classes.dir}" srcdir="${buildsystem.baton}" bootclasspath="${platform.bootclasspath}" encoding="${javac.encoding}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<copy todir="${build.classes.dir}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
</copy>
<nb-overrideproperty name="buildsystem.baton" value="${build.classes.dir}"/>
</target>
<target name="extract-libs" description="Extracts all bundled libraries.">
<mkdir dir="${build.classes.dir}"/>
<nb-extract dir="${build.classes.dir}" excludeManifest="true" classpath="${libs.classpath}" excludeclasspath="${extra.classpath}"/>
</target>
<target name="post-compile"/>
<target name="compile" depends="preprocess,pre-compile,extract-libs,do-compile,post-compile" description="Compile project classes."/>
<!--compile-single-->
<target name="pre-compile-single"/>
<target name="do-compile-single">
<fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
<mkdir dir="${build.classes.dir}"/>
<javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" srcdir="${buildsystem.baton}" destdir="${build.classes.dir}" bootclasspath="${platform.bootclasspath}" includes="${javac.includes}" encoding="${javac.encoding}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
</target>
<target name="post-compile-single"/>
<target name="compile-single" depends="preprocess,pre-compile-single,do-compile-single,post-compile-single" description="Compile selected project classes."/>
<!--proguard-->
<target name="proguard-init" description="Up-to-date check before obfuscation.">
<property name="obfuscation.level" value="0"/>
<condition property="no.obfusc">
<or>
<equals arg1="${obfuscation.level}" arg2="0"/>
<uptodate targetfile="${obfuscator.destjar}">
<srcfiles dir="${buildsystem.baton}"/>
</uptodate>
</or>
</condition>
<uptodate property="obfuscation.up-to-date" targetfile="${obfuscator.destjar}">
<srcfiles dir="${buildsystem.baton}"/>
</uptodate>
</target>
<target name="skip-obfuscation" depends="proguard-init" if="obfuscation.up-to-date">
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
</target>
<target name="proguard" depends="skip-obfuscation" description="Obfuscate project classes." unless="no.obfusc">
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
<fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
<property name="obfuscator.classpath" value=""/>
<dirname file="${obfuscator.srcjar}" property="obfuscator.srcjar.dir"/>
<dirname file="${obfuscator.destjar}" property="obfuscator.destjar.dir"/>
<mkdir dir="${obfuscator.srcjar.dir}"/>
<mkdir dir="${obfuscator.destjar.dir}"/>
<jar jarfile="${obfuscator.srcjar}" basedir="${buildsystem.baton}"/>
<property name="obfuscation.custom" value=""/>
<nb-obfuscate srcjar="${obfuscator.srcjar}" destjar="${obfuscator.destjar}" obfuscatorclasspath="${obfuscator.classpath}" classpath="${platform.bootclasspath}:${extra.classpath}" obfuscationLevel="${obfuscation.level}" extraScript="${obfuscation.custom}"/>
<mkdir dir="${obfuscated.classes.dir}"/>
<unjar src="${obfuscator.destjar}" dest="${obfuscated.classes.dir}"/>
<nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
</target>
<!--obfuscate-->
<target name="pre-obfuscate"/>
<target name="post-obfuscate"/>
<target name="obfuscate" depends="compile,pre-obfuscate,proguard,post-obfuscate" description="Obfuscate project classes."/>
<!--lwuit-build-->
<import file="lwuit.xml" optional="true"/>
<target name="-lwuit-check">
<condition property="lwuit.allowed">
<and>
<available file="nbproject/lwuit.xml"/>
<isset property="is.mesdk_lwuit"/>
</and>
</condition>
</target>
<target name="-pre-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
<target name="-lwuit-build" depends="-lwuit-check" if="lwuit.allowed">
<antcall target="lwuit_build"/>
</target>
<target name="-post-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
<target name="lwuit-build" depends="-lwuit-check,-pre-lwuit-build, -lwuit-build, -post-lwuit-build" if="lwuit.allowed"/>
<!--preverify-->
<target name="pre-preverify"/>
<target name="do-preverify" if="cldc-platform.trigger">
<fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
<mkdir dir="${preverify.sources.dir}"/>
<copy todir="${preverify.sources.dir}">
<fileset dir="${buildsystem.baton}" includes="**/*.class"/>
</copy>
<mkdir dir="${preverify.classes.dir}"/>
<nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>
<copy todir="${preverify.classes.dir}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
</copy>
<nb-overrideproperty name="buildsystem.baton" value="${preverify.classes.dir}"/>
</target>
<target name="post-preverify"/>
<target name="preverify" depends="obfuscate,lwuit-build,pre-preverify,do-preverify,post-preverify" description="Preverify project classes."/>
<!--set-password-->
<target name="set-password-init">
<property name="sign.enabled" value="false"/>
<condition property="skip-sign-keystore-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.keystore.password"/>
<not>
<equals arg1="${sign.keystore}" arg2="" trim="true"/>
</not>
<not>
<equals arg1="${sign.keystore.password}" arg2="" trim="true"/>
</not>
</and>
</or>
</condition>
<condition property="skip-sign-alias-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.alias"/>
<isset property="sign.alias.password"/>
<not>
<equals arg1="${sign.keystore}" arg2="" trim="true"/>
</not>
<not>
<equals arg1="${sign.alias}" arg2="" trim="true"/>
</not>
<not>
<equals arg1="${sign.alias.password}" arg2="" trim="true"/>
</not>
</and>
</or>
</condition>
</target>
<target name="set-keystore-password" if="netbeans.home" unless="skip-sign-keystore-password-input">
<nb-enter-password keystore="${sign.keystore}" passwordproperty="sign.keystore.password"/>
</target>
<target name="set-alias-password" if="netbeans.home" unless="skip-sign-alias-password-input">
<nb-enter-password keystore="${sign.keystore}" keyalias="${sign.alias}" passwordproperty="sign.alias.password"/>
</target>
<target name="set-password" depends="set-password-init,set-keystore-password,set-alias-password"/>
<!--create JAD-->
<target name="add-configuration" unless="contains.manifest.configuration">
<nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
<nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
</target>
<target name="add-profile" unless="contains.manifest.profile">
<nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
<nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
</target>
<target name="create-jad" if="cldc-platform.trigger">
<fail unless="dist.jad">Must set dist.jad</fail>
<mkdir dir="${build.dir}"/>
<dirname file="${dist.dir}/${dist.jad}" property="dist.jad.dir"/>
<mkdir dir="${dist.jad.dir}"/>
<condition property="evaluated.manifest.apipermissions" value="${manifest.apipermissions}">
<not>
<equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
</not>
</condition>
<condition property="evaluated.manifest.pushregistry" value="${manifest.pushregistry}">
<not>
<equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
</not>
</condition>
<condition property="contains.manifest.configuration">
<contains substring="MicroEdition-Configuration: " string="${manifest.others}"/>
</condition>
<condition property="contains.manifest.profile">
<contains substring="MicroEdition-Profile: " string="${manifest.others}"/>
</condition>
<property value="" name="evaluated.manifest.apipermissions"/>
<property value="" name="evaluated.manifest.pushregistry"/>
<property name="manifest.jad" value=""/>
<property name="manifest.manifest" value=""/>
<nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</nb-output>
<nb-output file="${manifest.build.file}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</nb-output>
<antcall target="add-configuration" inheritall="true" inheritrefs="true"/>
<antcall target="add-profile" inheritall="true" inheritrefs="true"/>
<property name="manifest.available" value="true"/>
</target>
<!--do-extra-libs-->
<target name="do-extra-libs" if="extra.classpath">
<property name="dist.lib.dir" value="${dist.dir}/lib"/>
<mkdir dir="${dist.lib.dir}"/>
<copy todir="${dist.lib.dir}">
<path path="${extra.classpath}"/>
<flattenmapper/>
</copy>
</target>
<!--nokiaS80-manifest-->
<target name="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger">
<fail message="Main class is not set!">
<condition>
<equals arg1="${main.class}" arg2="" trim="true"/>
</condition>
</fail>
<mkdir dir="${build.dir}/j9"/>
<taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
<j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
<copy file="${manifest.file}" tofile="${manifest.build.file}" failonerror="false"/>
<property name="manifest.available" value="true"/>
<loadfile property="nokia.manifest.j9" srcFile="${j9.dist}"/>
</target>
<target name="nokiaS80-prepare-manifest" depends="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger" unless="nokia.icon.invalid">
<pathconvert property="logo.icon.name" pathsep=" ">
<path path="${nokiaS80.application.icon}"/>
<chainedmapper>
<flattenmapper/>
<globmapper from="*" to="*"/>
</chainedmapper>
The error says class file is missing, you can try to clean and build.
-
Ejecting TM HD: error code -36
I've been experiencing problems that appear to be related to time machine for several months. I used to leave time machine on 24/7, and most of the time I would leave my mac on 24/7 with periodic reboots and ~weekly shutdowns. But then Time Machine started hanging during the "Preparing backup" stage. I mean, it would just sit there and spin for hours. I would leave it on overnight and I would come back in the morning and it would still be "Preparing backup." It would not respond to "Stop backing up" requests, and when I would try to retrieve a backed up version, TM would hang, and everything would be completely unresponsive (no way to force a shut down of TM) until I shut off (or unplugged) my ext HD. I've had a recurring specific problem with files being deleted related to Dreamweaver CS3, that only happens after TM hangs and I have to d/c the HD and then OS hangs when I try to reboot (or shutdown) and I have to hold the power button down to force a shutdown.
So, recently I've begun only turning on and connecting my ext HD once or twice a day, to make sure I get some good backups, and this seems to be a way around the TM hang issue. But just today, after I got a good backup, I tried to eject the ext HD and I get an unexpected error code -36. What is going on? I can't help but get the feeling that this is related to that OS update that ran yesterday. Is anyone else having this sort of issue? Any ideas to solve it?macographer,
Try to avoid "forced restarts" as much as possible. If you must stop a backup, then use either “Stop Backing Up” from the Time Machine menu, or click the tiny "x" icon in the Time Machine preference pane. Both procedures will work and should not be considered a dangerous interruption. [http://docs.info.apple.com/article.html?path=Mac/10.5/en/15144.html]
As for extended sessions of preparing, see the article below.
*_Time Machine May Report "Preparing..." For a Long Time_*
First, it’s good to determine WHY Time Machine is "Preparing..." for an extended period of time. Examining the Console logs during this event can reveal what is actually going on behind the scenes. It may be “Preparing…” for a genuinely good reason. How long is 'too long' to wait for Time Machine to finish "Preparing..."? Some times, "Preparing..." is required to perform the normal housekeeping that Time Machine does periodically. Other times, it really is "stuck" and never proceeds after more than 24 hours.
*”Deep Traversal” (Recent Crash / Forced Restart / System Update / Extended Period Between Backups)*
According to the following KB article it can sometimes take quite a long time if Time Machine begins a “deep traversal” and has to compare data inventories. This may apply to your situation, particularly if many Gigs of data are involved. [http://support.apple.com/kb/TS1516]
You see, Time Machine *+does not+* ordinarily perform file-by-file comparisons to determine what has changed and thus determine what needs to be backed up. Rather, Time Machine relies on FSEvents notifications. This is a log that the system uses to keep track of changes to directories. Rather than scan tens of thousands of files for changes each time, Time Machine simply looks at this log and narrows its’ scan to only the directories that have experienced changes since the last backup. Otherwise, Time Machine would have to be running constantly just to catch every change on its own and thus eat up precious CPU.
Every event that FSEvents records has its’ own ID which includes a time stamp. At the end of every backup, Time Machine stores the last event ID that it processes. When the next backup is initiated, Time Machine looks at this stored ID and determines that it only needs to backup events that have occurred after the time stamp on this last event ID.
If, due to a system crash, power failure, forced restart, or some other major system event, Time Machine cannot find this last event ID in the system logs then it will consider the FSEvents log “untrustable” and it will go into what’s called “deep traversal”. The Console logs may report +“Event store UUIDs don't match”.+ In this event, Time Machine will by-pass the system log entirely and perform its’ own file-by-file comparison to determine what has changed since its’ last backup. Obviously, if tens or hundreds of Gigs are involved, then this process can take quite some time and should be allowed to proceed.
Additionally, it appears that if Time Machine has to go back too far to find the last event ID, then it will give up and simply go into “deep traversal” and do the file-by-file scan on its’ own. This can occur if Time Machine has not been able to perform its’ hourly backups for some time, as is the case for users who only backup once a week or so. This is also the case with major Mac OS system updates that change thousands of files at one time. There are simply too many events logged by the system for Time Machine to bother looking for the last known event ID.
*Anti-Virus Software*
Running anti-virus software can interfere with the backup process. Either disable it altogether, or try the suggestion outlined here, “If you use third-party anti-virus scanning software and have issues, make sure your Time Machine back up folder (Backups.backupdb on the Time Machine disk) is excluded from virus scanning.” (http://support.apple.com/kb/TS1516)
*Software Updates* #
Installing new software, upgrading existing software, or updating Mac OS X system software can create major changes in the structure of your Macs directories. Time Machine will backup every file that has changed since the installation.
After an OS update (like 10.5.5) Time Machine realizes the system no longer matches what it looked like during the previous backup. So it has determined that it's earlier catalogue of what-should-be-where is “untrustable”. So it is going to go item-by-item comparing the before and after of your system. If you have just performed an OS Update then Time Machine knows what it's doing - let it do it!
*Spotlight Keeps Indexing Backup Drive* #
It may be that Time Machine can’t proceed or complete a backup due to a Spotlight indexing error. During this period, take a look at the Spotlight icon in the upper right corner of your screen. Is there a tiny dot pulsating in the center of the spyglass? Click on the icon. Is there a progress bar displayed? Generally, Spotlight indexing is a good thing. If it has only been a couple of hours then let the process continue.
However, at times it may hang and never progress after many hours, preventing further backups from taking place.
Go to System Prefs --> Spotlight --> Privacy Tab.
Drag your Time Machine disk into the window. It should now be among the items to exclude from indexing.
Now quit System Prefs.
Reboot your Mac.
Reopen System Prefs and remove ("-") the Time Machine disk from the window.
Now initiate a backup.
This should clear out Spotlights cache. Naturally, Spotlight should begin indexing again (maybe even for a few hours depending on how much data there is), but it should eventually stop.
*Run Away System Process*
It’s possible that Time Machine is stuck “Preparing…” because another process is monopolizing your Macs’ CPU. Launch Activity Monitor and sort the items by “CPU”. Is there a process that is at or near 100% that might be preventing the backupd process from moving forward?
One poster stated, “I took it to my local Genius Bar and they found a Syslogd daemon running, taking up 100% of my CPU. The result (other than bad performance) was that the disk configuration was constantly dynamic, thus TM could never pin it down to back it up. This resulted in the "Preparing..." mode running forever. They resolved it by simply reloading the OS X to 10.5.4. It ran fine on that and I've now updated back to 10.5.5 and everything is running fine.” [http://discussions.apple.com/thread.jspa?threadID=1755600&tstart=15]
You can use Activity Monitor to “kill” the offending process. Or you may be able to resolve it simply by rebooting your Mac. Then try backing up again.
*Verify/Repair Mac Hard Disk & Permissions*
It may be that your Macs’ internal hard disk has so many file/directory issues that Time Machine simply has trouble making sense of it. Some users have had success using Disk Utility on their Macs’ hard drive.
Launch Disk Utility and click “Repair Disk Permissions”.
Once complete, attempt a backup.
If Time Machine appears to hang at “Preparing…” again, then do the following:
Insert your Macs’ original install DVD and reboot holding down the “C” key.
At the Welcome screen go up to the “Utilities” menu and select Disk Utility.
Select your Macs’ hard disk on the left and click “Verify Disk” on the right.
If problems are found click “Repair Disk”.
Reboot to your normal desktop and try backing up again.
Let us know if any of the above was helpful in your case.
Glenn
Message was edited by: Glenn Carter
Message was edited by: Glenn Carter -
Error parsing enveloped data (Error Code: 101): Cannot decrypt request
When my player requests http://<server>:8080/flashaccessserver/<tenant>/flashaccess/license/v1 the following happens:
- HTTP 500 is returned
- in the log file, an ERROR is appended, copied below:
[#:10] 2011-01-14 12:19:37,381 DEBUG [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine ] Started processing request...
[#:10] 2011-01-14 12:19:37,385 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine ]
Error occurred processing license acquisition request
com.adobe.flashaccess.sdk.protocol.HandlerParsingException: com.adobe.flashaccess.core.pkcs7.PKCS7Exception: Error parsing enveloped data (Error Code: 101):
Cannot decrypt request
at com.adobe.flashaccess.sdk.protocol.AbstractHandler.parseRequest(AbstractHandler.java:73)
at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest(LicenseEngine.java :193)
at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest(LicenseEngine.java :63)
at com.adobe.flashaccess.server.generic.engine.AbstractEngine.processLicenseRequest(Abstract Engine.java:70)
at com.adobe.flashaccess.server.license.servlet.LicenseEngineDelegatorServlet.doPost(License EngineDelegatorServlet.java:53)
etc...
The Validator says that the config is ok, but I can't get this /license/v1 url to work.
Can you help?
Thank you!I have managed to get past that 101 error, but now there is another error... and I have no idea where to continue... can you help?
Thank you in advance!
This is my log file:
[#:3] 2011-01-14 16:38:53,623 INFO [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/opt/adobe/flashaccess/tomcat/licenseserver/flashaccessserver/libs/, file:/opt/adobe/flashaccess/tomcat/licenseserver/flashaccessserver/libs/flashaccess-licen se-server-ext-sample.jar]'
[#:3] 2011-01-14 16:38:53,626 DEBUG [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine ] Started processing request...
[#:3] 2011-01-14 16:40:26,933 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine ] Error occurred processing license acquisition request
java.lang.UnsatisfiedLinkError: com.rsa.Native.JN_SHA1.NativeDigestInit([B)[B
at com.rsa.Native.JN_SHA1.NativeDigestInit(Native Method)
at com.rsa.cryptoj.n.fN.a(Unknown Source)
at com.rsa.cryptoj.n.qE.a(Unknown Source)
at com.rsa.cryptoj.n.qE.f(Unknown Source)
at com.rsa.cryptoj.n.bA.a(Unknown Source)
at com.rsa.jsafe.JSAFE_Signature.verifyInit(Unknown Source)
at com.rsa.jsafe.JSAFE_Signature.verifyInit(Unknown Source)
at com.adobe.flashaccess.core.crypto.jsafe.RSASigVerifier_JSAFE.<init>(RSASigVerifier_JSAFE. java:46)
at com.adobe.flashaccess.core.crypto.RSASigVerifier.getInstance(RSASigVerifier.java:30)
at com.adobe.flashaccess.core.pkcs7.SignedDataVerifier.verify(SignedDataVerifier.java:82)
at com.adobe.flashaccess.core.pkcs7.SignedDataVerifier.verify(SignedDataVerifier.java:164)
at com.adobe.flashaccess.core.pkcs7.SignedData.verifySignature(SignedData.java:335)
at com.adobe.flashaccess.core.media.drm.keys.v2.V2ContentMetadataImpl.parseMetadata(V2Conten tMetadataImpl.java:189)
at com.adobe.flashaccess.core.media.drm.keys.v2.V2ContentMetadataImpl.<init>(V2ContentMetada taImpl.java:155)
at com.adobe.flashaccess.sdk.protocol.license.LicenseRequestMessage.parseLicenseMessage(Lice nseRequestMessage.java:565)
at com.adobe.flashaccess.sdk.protocol.license.LicenseRequestMessage.<init>(LicenseRequestMes sage.java:137)
at com.adobe.flashaccess.sdk.protocol.license.LicenseHandler.parseRequestMessages(LicenseHan dler.java:128)
at com.adobe.flashaccess.sdk.protocol.AbstractBatchHandler.parseRequestMessage(AbstractBatch Handler.java:124)
at com.adobe.flashaccess.sdk.protocol.AbstractHandler.parseRequest(AbstractHandler.java:75)
at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest(LicenseEngine.java :193)
at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest(LicenseEngine.java :63)
at com.adobe.flashaccess.server.generic.engine.AbstractEngine.processLicenseRequest(Abstract Engine.java:70)
at com.adobe.flashaccess.server.license.servlet.LicenseEngineDelegatorServlet.doPost(License EngineDelegatorServlet.java:53)
etc. -
Hi,
I have a NW2004S installation with Enterprise Portal. The server doesn't start and gives and error code of -11113. I am not able to get into Visual administrator.
Can somebody help me with this error?
Thanks,
Suma.Hi,
Here is the dev_jcontrol log -
[Thr 29612] Mon Oct 08 14:37:52 2007
[Thr 29612] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID38481850]
[Thr 29612] [Node: server0 bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 29612] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\EPM\DVEBMGS03\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap_ID38481850]
-> node name : server0 bootstrap
-> node type : bootstrap
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 256M
-> root path : D:\usr\sap\EPM\DVEBMGS03\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : D:\usr\sap\EPM\DVEBMGS03\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\EPM\DVEBMGS03\exe\jstartup.jar;D:\usr\sap\EPM\DVEBMGS03\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID038481850
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[02] = -DSAPINFO=EPM_03_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=D:\usr\sap\EPM\DVEBMGS03\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_29608
-> arg[06] = -nodeName=bootstrap_ID38481850
-> arg[07] = -jvmOutFile=D:\usr\sap\EPM\DVEBMGS03\work\jvm_bootstrap_ID38481850.out
-> arg[08] = -stdOutFile=D:\usr\sap\EPM\DVEBMGS03\work\std_bootstrap_ID38481850.out
-> arg[09] = -locOutFile=D:\usr\sap\EPM\DVEBMGS03\work\dev_bootstrap_ID38481850
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=1724
-> arg[14] = -DSAPSYSTEM=03
-> arg[15] = -DSAPSYSTEMNAME=EPM
-> arg[16] = -DSAPMYNAME=ps5207_EPM_03
-> arg[17] = -DSAPPROFILE=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;D:\usr\sap\EPM\DVEBMGS03\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
[Thr 29612] Mon Oct 08 14:37:57 2007
[Thr 29612] JControlIBuildProcessList: Maximum error count is set to 4
[Thr 29612] [Node: dispatcher] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 29612] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\EPM\DVEBMGS03\exe\jvmx.jar
JStartupIReadSection: read node properties [ID38481800]
-> node name : dispatcher
-> node type : dispatcher
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -XX:NewSize=125m -XX:MaxNewSize=125m -XX:NewRatio=3 -XX:DisableExplicitGC -verbose:gc -XX:UseConcMarkSweepGC -Dstartup.mode=SAFE -Dstartup.action=NONE
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 374M
-> init heap size : 374M
-> root path : D:\usr\sap\EPM\DVEBMGS03\j2ee\cluster\dispatcher
-> class path : .\bin\boot\boot.jar;.\bin\system\bytecode.jar;.
-> OS libs path : D:\usr\sap\EPM\DVEBMGS03\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\EPM\DVEBMGS03\exe\jstartup.jar;D:\usr\sap\EPM\DVEBMGS03\exe\jvmx.jar
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 29612] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 29612] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\EPM\DVEBMGS03\exe\jvmx.jar
JStartupIReadSection: read node properties [ID38481850]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_12
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Dstartup.mode=SAFE -Dstartup.action=NONE
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 1024M
-> init heap size : 1024M
-> root path : D:\usr\sap\EPM\DVEBMGS03\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : D:\usr\sap\EPM\DVEBMGS03\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\EPM\DVEBMGS03\exe\jstartup.jar;D:\usr\sap\EPM\DVEBMGS03\exe\jvmx.jar
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50321
-> shutdown timeout : 120000
[Thr 29612] INFO: Invalid property value [Debbugable=yes]
[Thr 29612] [Node: SDM] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_12
[Thr 21080] JControlRequestFunc: Thread 21080 started as listener thread for np messages.
[Thr 29612] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\EPM\DVEBMGS03\exe\jvmx.jar
JStartupIReadSection: read node properties [sdm]
-> node name : SDM
-> node type : sdm
-> node execute : yes
-> java path : C:\j2sdk1.4.2_12
-> java parameters :
-> java vm version : 1.4.2_12-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 256M
-> root path : D:\usr\sap\EPM\DVEBMGS03\SDM\program
-> class path : D:\usr\sap\EPM\DVEBMGS03\SDM\program\bin\SDM.jar
-> OS libs path : D:\usr\sap\EPM\DVEBMGS03\j2ee\os_libs
-> main class : SDMInternal
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\EPM\DVEBMGS03\exe\jstartup.jar;D:\usr\sap\EPM\DVEBMGS03\exe\jvmx.jar
-> shutdown class : com.sap.sdm.jstartup.shutdown.InternalShutDown
-> parameters : server sdmhome=D:/usr/sap/EPM/DVEBMGS03/SDM/program
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 29612] JControlMSConnect: attached to message server (ps5207/3902)
[Thr 28836] JControlMSMessageFunc: Thread 28836 started as listener thread for ms messages.
JControlStartJLaunch: program = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[02] = -DSAPINFO=EPM_03_dispatcher
-> arg[03] = -nodeId=0
-> arg[04] = -file=D:\usr\sap\EPM\DVEBMGS03\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_29608
-> arg[06] = -nodeName=ID38481800
-> arg[07] = -jvmOutFile=D:\usr\sap\EPM\DVEBMGS03\work\jvm_dispatcher.out
-> arg[08] = -stdOutFile=D:\usr\sap\EPM\DVEBMGS03\work\std_dispatcher.out
-> arg[09] = -locOutFile=D:\usr\sap\EPM\DVEBMGS03\work\dev_dispatcher
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=1724
-> arg[14] = -DSAPSYSTEM=03
-> arg[15] = -DSAPSYSTEMNAME=EPM
-> arg[16] = -DSAPMYNAME=ps5207_EPM_03
-> arg[17] = -DSAPPROFILE=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;D:\usr\sap\EPM\DVEBMGS03\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
[Thr 29612] JControlICheckProcessList: process dispatcher started (PID:28924)
JControlStartJLaunch: program = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[02] = -DSAPINFO=EPM_03_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\EPM\DVEBMGS03\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_29608
-> arg[06] = -nodeName=ID38481850
-> arg[07] = -jvmOutFile=D:\usr\sap\EPM\DVEBMGS03\work\jvm_server0.out
-> arg[08] = -stdOutFile=D:\usr\sap\EPM\DVEBMGS03\work\std_server0.out
-> arg[09] = -locOutFile=D:\usr\sap\EPM\DVEBMGS03\work\dev_server0
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=1724
-> arg[14] = -DSAPSYSTEM=03
-> arg[15] = -DSAPSYSTEMNAME=EPM
-> arg[16] = -DSAPMYNAME=ps5207_EPM_03
-> arg[17] = -DSAPPROFILE=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;D:\usr\sap\EPM\DVEBMGS03\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
[Thr 29612] JControlICheckProcessList: process server0 started (PID:28912)
JControlStartJLaunch: program = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[02] = -DSAPINFO=EPM_03_sdm
-> arg[03] = -nodeId=2
-> arg[04] = -file=D:\usr\sap\EPM\DVEBMGS03\SDM\program\config\sdm_jstartup.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_29608
-> arg[06] = -nodeName=sdm
-> arg[07] = -jvmOutFile=D:\usr\sap\EPM\DVEBMGS03\work\jvm_sdm.out
-> arg[08] = -stdOutFile=D:\usr\sap\EPM\DVEBMGS03\work\std_sdm.out
-> arg[09] = -locOutFile=D:\usr\sap\EPM\DVEBMGS03\work\dev_sdm
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=1724
-> arg[14] = -DSAPSYSTEM=03
-> arg[15] = -DSAPSYSTEMNAME=EPM
-> arg[16] = -DSAPMYNAME=ps5207_EPM_03
-> arg[17] = -DSAPPROFILE=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;D:\usr\sap\EPM\DVEBMGS03\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
[Thr 29612] JControlICheckProcessList: process SDM started (PID:26960)
[Thr 29612] JControlMSSendLogon: delete SDM logon information (rc=0)
[Thr 29612] Mon Oct 08 14:38:07 2007
[Thr 29612] JControlMSSendLogon: insert SDM logon information (port=50318; rc=0)
[Thr 29612] Mon Oct 08 14:39:02 2007
[Thr 29612] JControlICheckProcessList: process server0 (pid:28912) died (RUN-FLAG)
[Thr 29612] JControlIResetProcess: reset process server0
[Thr 29612] JControlIResetProcess: [server0] not running -> increase error count (1)
[Thr 29612] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_12\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID38481850 1191834477 -bz D:\usr\sap\EPM\SYS\global
JControlStartJLaunch: program = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[02] = -DSAPINFO=EPM_03_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\EPM\DVEBMGS03\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_29608
-> arg[06] = -nodeName=ID38481850
-> arg[07] = -jvmOutFile=D:\usr\sap\EPM\DVEBMGS03\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\EPM\DVEBMGS03\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\EPM\DVEBMGS03\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[15] = -DSAPSTART=1
-> arg[16] = -DCONNECT_PORT=1724
-> arg[17] = -DSAPSYSTEM=03
-> arg[18] = -DSAPSYSTEMNAME=EPM
-> arg[19] = -DSAPMYNAME=ps5207_EPM_03
-> arg[20] = -DSAPPROFILE=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[21] = -DFRFC_FALLBACK=ON
-> arg[22] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;D:\usr\sap\EPM\DVEBMGS03\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
[Thr 29612] JControlICheckProcessList: process server0 started (PID:13884)
[Thr 29612] Mon Oct 08 14:39:22 2007
[Thr 29612] JControlICheckProcessList: process server0 (pid:13884) died (RUN-FLAG)
[Thr 29612] JControlIResetProcess: reset process server0
[Thr 29612] JControlIResetProcess: [server0] not running -> increase error count (2)
[Thr 29612] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_12\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID38481850 1191834542 -bz D:\usr\sap\EPM\SYS\global
JControlStartJLaunch: program = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[02] = -DSAPINFO=EPM_03_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\EPM\DVEBMGS03\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_29608
-> arg[06] = -nodeName=ID38481850
-> arg[07] = -jvmOutFile=D:\usr\sap\EPM\DVEBMGS03\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\EPM\DVEBMGS03\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\EPM\DVEBMGS03\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[15] = -DSAPSTART=1
-> arg[16] = -DCONNECT_PORT=1724
-> arg[17] = -DSAPSYSTEM=03
-> arg[18] = -DSAPSYSTEMNAME=EPM
-> arg[19] = -DSAPMYNAME=ps5207_EPM_03
-> arg[20] = -DSAPPROFILE=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[21] = -DFRFC_FALLBACK=ON
-> arg[22] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;D:\usr\sap\EPM\DVEBMGS03\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
[Thr 29612] JControlICheckProcessList: process server0 started (PID:30716)
[Thr 29612] Mon Oct 08 14:39:42 2007
[Thr 29612] JControlICheckProcessList: process server0 (pid:30716) died (RUN-FLAG)
[Thr 29612] JControlIResetProcess: reset process server0
[Thr 29612] JControlIResetProcess: [server0] not running -> increase error count (3)
[Thr 29612] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_12\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID38481850 1191834562 -bz D:\usr\sap\EPM\SYS\global
JControlStartJLaunch: program = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\EPM\DVEBMGS03\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[02] = -DSAPINFO=EPM_03_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\EPM\DVEBMGS03\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_29608
-> arg[06] = -nodeName=ID38481850
-> arg[07] = -jvmOutFile=D:\usr\sap\EPM\DVEBMGS03\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\EPM\DVEBMGS03\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\EPM\DVEBMGS03\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[15] = -DSAPSTART=1
-> arg[16] = -DCONNECT_PORT=1724
-> arg[17] = -DSAPSYSTEM=03
-> arg[18] = -DSAPSYSTEMNAME=EPM
-> arg[19] = -DSAPMYNAME=ps5207_EPM_03
-> arg[20] = -DSAPPROFILE=D:\usr\sap\EPM\SYS\profile\EPM_DVEBMGS03_ps5207
-> arg[21] = -DFRFC_FALLBACK=ON
-> arg[22] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;D:\usr\sap\EPM\DVEBMGS03\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\EPM\SYS\exe\uc\NTI386
[Thr 29612] JControlICheckProcessList: process server0 started (PID:28492)
[Thr 29612] Mon Oct 08 14:40:12 2007
[Thr 29612] JControlICheckProcessList: process server0 (pid:28492) died (RUN-FLAG)
[Thr 29612] JControlIResetProcess: reset process server0
[Thr 29612] JControlIResetProcess: [server0] not running -> increase error count (4)
[Thr 29612] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_12\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID38481850 1191834582 -bz D:\usr\sap\EPM\SYS\global
and here is the std_server0 log
Oct 8, 2007 2:38:56 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_63] Fatal: User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: " Logon not possible (error in license check) ". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "{
passwd=********
receiverid=master
sysnr=$$
client=001
poolmaxsize=10
user=SAPJSF
receiverid_guest=master
ashost=localhost
poolmaxwait=10000
Oct 8, 2007 2:38:56 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_63] Fatal: Initialization of UME persistence adapter "R3_DATASOURCE" failed.
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:372)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Logon not possible (error in license check)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:178)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:356)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:156)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:109)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:56)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:266)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:279)
... 6 more
com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:372)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Logon not possible (error in license check)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:178)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:356)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:156)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:109)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:56)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:266)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:279)
... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Oct 8, 2007 2:38:56 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_63] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
stdout/stderr redirect
node name : server0
pid : 29608
system name : EPM
system nr. : 03
started at : Mon Oct 08 14:39:02 2007
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 13736] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: The filename, directory name, or volume label syntax is incorrect
Loading: LogManager ... 484 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 63 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 0 ms.
Loading: ClusterManager ... 172 ms.
Loading: LockingManager ... 63 ms.
Loading: ConfigurationManager ... 2218 ms.
Loading: LicensingManager ... 32 ms.
Loading: CacheManager ... 171 ms.
Loading: ServiceManager ...
Loading services.:
Service memory started. (16 ms).
Service DQE started. (0 ms).
Service cafeuodi~mnuacc started. (0 ms).
Service cross started. (16 ms).
Service file started. (63 ms).
Service userstore started. (16 ms).
Service timeout started. (16 ms).
Service cafeucc~api started. (16 ms).
Service trex.service started. (32 ms).
Service runtimeinfo started. (16 ms).
Service p4 started. (188 ms).
Service classpath_resolver started. (16 ms).
Service jmx_notification started. (219 ms).
Service log_configurator started. (6031 ms).
Service locking started. (0 ms).
Service deploy started. (6579 ms).
Service naming started. (704 ms).
Service bimmrdeployer started. (110 ms).
Service jmsconnector started. (125 ms).
Service MigrationService started. (219 ms).
Service http started. (891 ms).
Service failover started. (156 ms).
Service ts started. (172 ms).
Service javamail started. (204 ms).
Service appclient started. (187 ms).
Service licensing started. (0 ms).
Service connector started. (219 ms).
Service configuration started. (16 ms).
Service iiop started. (328 ms).
Service webservices started. (593 ms).
Service dbpool started. (1547 ms).
Service cafeugpmailcf started. (47 ms).
Oct 8, 2007 2:39:19 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_61] Fatal: User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: " Logon not possible (error in license check) ". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "{
passwd=********
receiverid=master
sysnr=$$
client=001
poolmaxsize=10
user=SAPJSF
receiverid_guest=master
ashost=localhost
poolmaxwait=10000
Oct 8, 2007 2:39:19 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_61] Fatal: Initialization of UME persistence adapter "R3_DATASOURCE" failed.
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:372)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Logon not possible (error in license check)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:178)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:356)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:156)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:109)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:56)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:266)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:279)
... 6 more
com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:372)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Logon not possible (error in license check)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:178)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:356)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:156)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:109)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:56)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:266)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:279)
... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Oct 8, 2007 2:39:19 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_61] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
stdout/stderr redirect
node name : server0
pid : 29608
system name : EPM
system nr. : 03
started at : Mon Oct 08 14:39:22 2007
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 28840] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: The filename, directory name, or volume label syntax is incorrect
Loading: LogManager ... 484 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 250 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 15 ms.
Loading: ClassLoaderManager ... 0 ms.
Loading: ClusterManager ... 172 ms.
Loading: LockingManager ... 63 ms.
Loading: ConfigurationManager ... 2375 ms.
Loading: LicensingManager ... 31 ms.
Loading: CacheManager ... 125 ms.
Loading: ServiceManager ...
Loading services.:
Service memory started. (15 ms).
Service DQE started. (0 ms).
Service cafeuodi~mnuacc started. (0 ms).
Service userstore started. (63 ms).
Service cross started. (63 ms).
Service file started. (172 ms).
Service runtimeinfo started. (0 ms).
Service timeout started. (203 ms).
Service jmx_notification started. (47 ms).
Service cafeucc~api started. (16 ms).
Service trex.service started. (47 ms).
Service p4 started. (235 ms).
Service classpath_resolver started. (16 ms).
Service log_configurator started. (4235 ms).
Service locking started. (15 ms).
Service http started. (281 ms).
Service naming started. (516 ms).
Service failover started. (125 ms).
Service appclient started. (188 ms).
Service javamail started. (218 ms).
Service ts started. (203 ms).
Service jmsconnector started. (282 ms).
Service licensing started. (15 ms).
Service connector started. (297 ms).
Service iiop started. (437 ms).
Service webservices started. (719 ms).
Service deploy started. (8406 ms).
Service configuration started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service MigrationService started. (781 ms).
Service dbpool started. (2547 ms).
Service cafeugpmailcf started. (62 ms).
Oct 8, 2007 2:39:41 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_72] Fatal: User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: " Logon not possible (error in license check) ". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "{
passwd=********
receiverid=master
sysnr=$$
client=001
poolmaxsize=10
user=SAPJSF
receiverid_guest=master
ashost=localhost
poolmaxwait=10000
Oct 8, 2007 2:39:41 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_72] Fatal: Initialization of UME persistence adapter "R3_DATASOURCE" failed.
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:372)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Logon not possible (error in license check)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:178)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:356)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:156)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:109)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:56)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:266)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:279)
... 6 more
com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:372)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Logon not possible (error in license check)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:178)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:356)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:156)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:109)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:56)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:266)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:279)
... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Oct 8, 2007 2:39:41 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_72] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
stdout/stderr redirect
node name : server0
pid : 29608
system name : EPM
system nr. : 03
started at : Mon Oct 08 14:39:42 2007
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 27264] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: The filename, directory name, or volume label syntax is incorrect
Loading: LogManager ... 500 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 63 ms.
Loading: ThreadManager ... 15 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 172 ms.
Loading: LockingManager ... 78 ms.
Loading: ConfigurationManager ... 2844 ms.
Loading: LicensingManager ... 31 ms.
Loading: CacheManager ... 172 ms.
Loading: ServiceManager ...
Loading services.:
Service memory started. (16 ms).
Service DQE started. (0 ms).
Service cafeuodi~mnuacc started. (0 ms).
Service cafeucc~api started. (47 ms).
Service runtimeinfo started. (0 ms).
Service cross started. (16 ms).
Service file started. (157 ms).
Service userstore started. (109 ms).
Service trex.service started. (234 ms).
Service timeout started. (344 ms).
Service jmx_notification started. (172 ms).
Service p4 started. (375 ms).
Service classpath_resolver started. (78 ms).
Service log_configurator started. (8234 ms).
Service locking started. (0 ms).
Service naming started. (328 ms).
Service http started. (578 ms).
Service failover started. (266 ms).
Service javamail started. (312 ms).
Service appclient started. (296 ms).
Service ts started. (406 ms).
Service jmsconnector started. (484 ms).
Service licensing started. (156 ms).
Service connector started. (438 ms).
Service webservices started. (594 ms).
Service iiop started. (469 ms).
Service deploy started. (15828 ms).
Service bimmrdeployer started. (47 ms).
Service MigrationService started. (94 ms).
Service configuration started. (78 ms).
Service dbpool started. (1891 ms).
Service cafeugpmailcf started. (94 ms).
Oct 8, 2007 2:40:10 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_78] Fatal: User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: " Logon not possible (error in license check) ". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "{
passwd=********
receiverid=master
sysnr=$$
client=001
poolmaxsize=10
user=SAPJSF
receiverid_guest=master
ashost=localhost
poolmaxwait=10000
Oct 8, 2007 2:40:10 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_78] Fatal: Initialization of UME persistence adapter "R3_DATASOURCE" failed.
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []
Maybe you are looking for
-
Doing a 7 or 35 pass erase with Disk Utility?
Hi, Awhile ago my hard drive got rewritten over by WindowXP and a month and a half later I found out that residue was left behind with weird looking things in my Core Services folder. So I want to do a secure erase. Should I do a 7 pass or 35 pass op
-
Maintaining internal links on Word files placed into Indesign
I want to bring a word file into Indesign, which has a very large number of internal links. When I place the file in Indesign, the external hyperlinks transfer as well as bookmarks, but the internal links do not., The blue colour and the underlining
-
How come when I put new music on my ipod it doesn't always put it in alphabetical order? For instance I put Jimmy Buffett on there which is a two disc album. It put disc 1 where it should be but disc 2 is at the end. I have outkast albums mixed up al
-
What are the techniques for detecting when a user's session has timed out using a JSF-based application and displaying a message to the user (.jspx, ADF BC, JDev 10.1.3.1)? Note I am not using a session-based bean, all beans are currently request-sco
-
Im looking for photoshop cs5 extended link
I am looking for a link to download photoshop cs5 extended.