Ext. monitor not able to show embedded video or still images

I have a late 2007 17" MacBook, 4GM Ram, 10.6.2. While the display is nice, my tired old eyes needed something larger. I bought an LG 23" external monitor and love it. I have it connected with a DVI to HDMI cable and running the 23" monitor at the 10800p setting through the Display preferences. Works fine in clamshell mode and with both monitors running. This is the way I usually operate as I can have Mail running on the 17" display and most everything else on the 23". The problem I've run into is videos that are in blogs I read though BlogSpot don't show up or even run on the 23" monitor. If I drag the Safari window they're in to the 17", all is well. Same problem with viewing still photos at WebShots. The small 'preview' image displays fine, but when I go to enlarge it to view it on the 23" monitor all I get is a blank screen. I have to drag the window to the 17". I've scratched my head and can't seem to figure out which settings I need to change. Can anyone offer assistance? Thanks!

I have imovie '05. Also, I tried to use the standard firewire cable and USB cables with my camera and computer. Unfortunately, both of them obviously fit in the apporiate ports in my computer, but do not fit in the back of my camera where the cable should fit. Does this mean that my camera is not compatible with my computer?(This would be an odd thing though as there's a whole section in my camera's instructions on how to use it with imovie.) If it is compatible is there any kind of device I could purchase that would enable a firewire or USB cable to work with both my camera and computer? And thus would allow me to use imovie and import my videos onto it.
Let me know. Thanks for your help.
All the best,
Charlie

Similar Messages

  • I am not able to sync some videos and apps onto my iphone 3gs. it shows a sync error: 0xe8008001.i updated it but still i am getting the same sync error problem..please help.

    i am not able to sync some videos and apps onto my iphone 3gs. it shows a sync error: 0xe8008001.i updated it but still i am getting the same sync error problem..please help.
    aman

    Are you using Windows...?

  • Not able to watch .mp4 videos in Quick Time Player

    Hi,
    I have a GOPro camera where the videos are currently stored on an external hard drive. I wanted to import those videos to iPhoto, which didn't work. Then I tried importing them without using iPhoto, but when trying to watch them I get a message saying that "Quick Time Player is not able to open the video.
    I find this very strange, as I already have some GoPro videos in IPhoto, which I can view just fine (in iPhoto, and outside of iPhoto). The videos are shot using the same camera.
    Also; Quick Time Player is supposed to support mp4. format; so I really don't see where I did go wrong?

    What format is used on the external drive?
    I suspect it's the reason the files can't be played.

  • Could not able to show a scalar value in Page Header/Group Header of the re

    Hi,
    I could not able to show a scalar value in Page Header/Group Header of the report which is returned from Sub-report. But I am able to display it in both Group Footer and Page Footer.
    I used shared variable in formula filed of both main and sub report and both are placed in the main and sub-report.
    Please do needful.
    Thanks & Regards,
    Mani G.S.

    You can only show Shared variables in main report in a location after the subreport has executed.
    If you want to show values in page header or group header you must place subreport in a section above these. This is unlikely to be possible so you will have to live with displaying results in Group/page footer.
    Alternatively you can execute subreport twice, once where subreport is hidden in a section above page/group header and pass summary figure you require and then again where you currently have subreport so you can see details as required.
    Ian

  • Not able to recognize any video/audio devices using jmf and java soun

    Hi ,
    I need one help from your side.
    Here I am expecting some clarifications from you. Before that let you my environement.
    My working environment :
    Eclipse tool and added jmf jar to my project I did not do any thing more.
    If any thing I need to do just let me know. My target platform is MAC & UBUNTU.
    Please bare with my questions.
    1) I am not able to recognize any video/audio devices using jmf and java sound APIs on My system.
    ( I checked with the app mentioned in the http://www.java-forums.org/new-java/11201-jmf-cannot-connect-device.html )
    Do we need any administrives rights for our working PC.
    What is the procedure/ setup I need to follow from a java application to enable particular audio/video device since I dont about end-user system setup right.
    If possible send some sample code to recognize /r detect audio device ( voice input ). It should run on both MAC and UBUNTU.
    2) I run the one sample audio recording application of this link (http://www.jsresources.org/examples/SimpleAudioRecorder.java.html) which is provided by YOU.
    I got output audio file and able to hear voice on UBUNTU system but not able to hear voice on MAC system.
    I heared that default line in ( audio setup of the sys) is wont take any voice data on MAC.Why I made this stmt means we are getting false when using isSupported methods of JAVA SOUND API.
    ( like for TragetdataLine ...i,e, all ports are getting false)
    I have one sample audio recording app implemented by QUICKTIME API. In this case also he taking audio ftom device only using quicetime API.
    With that we are able to record and hear audio ( voice input --> not line in , external device we added some thing like SSB...)
    3) In case of Video capturing DataSource, Streams are implemented by PullBufferDataSource , PullBufferStream intefaces used.
    In case of Audio capturing DataSource, Streams are implemented by PushBufferDataSource, PushBufferStream intefaces used.
    Can you explain the reasons ? I gone through API but i am not clear.
    HOPE I WILL BE CLARIFIED EVERY THING FROM YOU.
    Thanks
    RamaRao.G

    Hi ,
    I need one help from your side.
    Here I am expecting some clarifications from you. Before that let you my environement.
    My working environment :
    Eclipse tool and added jmf jar to my project I did not do any thing more.
    If any thing I need to do just let me know. My target platform is MAC & UBUNTU.
    Please bare with my questions.
    1) I am not able to recognize any video/audio devices using jmf and java sound APIs on My system.
    ( I checked with the app mentioned in the http://www.java-forums.org/new-java/11201-jmf-cannot-connect-device.html )
    Do we need any administrives rights for our working PC.
    What is the procedure/ setup I need to follow from a java application to enable particular audio/video device since I dont about end-user system setup right.
    If possible send some sample code to recognize /r detect audio device ( voice input ). It should run on both MAC and UBUNTU.
    2) I run the one sample audio recording application of this link (http://www.jsresources.org/examples/SimpleAudioRecorder.java.html) which is provided by YOU.
    I got output audio file and able to hear voice on UBUNTU system but not able to hear voice on MAC system.
    I heared that default line in ( audio setup of the sys) is wont take any voice data on MAC.Why I made this stmt means we are getting false when using isSupported methods of JAVA SOUND API.
    ( like for TragetdataLine ...i,e, all ports are getting false)
    I have one sample audio recording app implemented by QUICKTIME API. In this case also he taking audio ftom device only using quicetime API.
    With that we are able to record and hear audio ( voice input --> not line in , external device we added some thing like SSB...)
    3) In case of Video capturing DataSource, Streams are implemented by PullBufferDataSource , PullBufferStream intefaces used.
    In case of Audio capturing DataSource, Streams are implemented by PushBufferDataSource, PushBufferStream intefaces used.
    Can you explain the reasons ? I gone through API but i am not clear.
    HOPE I WILL BE CLARIFIED EVERY THING FROM YOU.
    Thanks
    RamaRao.G

  • Hello, bridge CC 2014 is not able to show RAW files of my Nikon D4s. What can I do about it?

    Hello, bridge CC 2014 is not able to show RAW files of my Nikon D4s. What can I do about it?

    Make sure the Adobe Camera Raw (ACR) Plug-In is updated to ACR 8.6.
    That camera has been supported since ACR 8.4.

  • Have msg on header: Firefox is not able to show the Toolbar. Please re-install the Toolbar. I cannot figure out how to re-install the Toolbar, nor exactly where to go to find it for download.

    There is a message on my Firefox header that says: "Firefox is not able to show the Toolbar. Please re-install the Toolbar." I would like to re-install the Toolbar, but don't know where to locate it for download. It has conveniences I use frequently & I'd like to get it back. Thank you for your help.

    Firefox has a couple of built-in toolbars, but if it mentions re-installing, it probably is an add-on toolbar. Do you know which one it was, e.g., Google, Yahoo, etc.? It might be on your extensions list here:
    Tools > Options > Extensions

  • When I upgraded to 4.0 it will not show the toolbar "Firefox is not able to show the Toolbar. Please re-install the Toolbar" How do I fix this?

    When I upgraded to 4.0 it will not show the toolbar "Firefox is not able to show the Toolbar. Please re-install the Toolbar" How do I fix this?

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Not able to watch online video's through safari.

    Using Ipad Mini...n im not able to watch online video's through safari. as it ask me too update flash player...Please help

    However Skyfire, Photon, iSwifter, Browse2Go and Puffin Web Browser will provide limited Flash capability

  • How do I make a thumbnail that has a gallery inside? And how can I make this gallery have embeded videos from vimeo + Images?

    Hello,
    I'm pretty new to Muse so I don't know a lot about it, but I researched a lot and didn't find an answer to this question.
    I'm trying to make a portfolio website. The website will be a 12 thumbnails. But each thumbnail is one project, not an image.
    When you click one of the thumbnails, I want it to be a lightbox that will show embeded videos from vimeo mixed with images.
    Ex: A coca-cola projet.
    Main page has a thumbnail of a coca cola image. When you click on it, it opens a lightbox with a coca-cola film, when i click to the right arrow, it shows a cocacola poster, then another poster, then another video. (but they are all part of this gallery, that is inside the thumbnail.
    Can you guys help me?
    Thanks!!!

    I don't understand why my thumbnails don't work.
    I dragged a composition lightbox inside another one. But I still have the first lightbox there and can't delete.
    When I try my wabsite i see this:
    But then I click the thumbnail and I see this:
    And when I click one of those 3 I see this:
    Like it is making a double lightbox.
    but it doesn't show the images, it's like the first lightbox is on top of the second one.
    How I deal with this?  =/

  • Can't see any imported video or still images in canvas

    Hi,
    I'm a new Motion 4 user. No matter what video or still images I import into a project, my canvas remains black. I am, however, able to see a wireframe outline of where the video / picture should be situated on the canvas. I am also able to hear audio in the timeline. I can also preview the picture when the file is selected in the browser. However, when I look at the project and see the file's I've important, the little preview window is empty, with the checkerboard background, as if it doesn't recognize the picture. I have checked to make sure I'm viewing RGB, instead of Alpha, and I've also trashed the pref and cache files. I'm running an external 23 inch cinema display but I've also disabled that to no avail. No matter what I import I'm simply looking at a black canvas.
    I've searched around the threads quite a bit but haven't found a solution yet. Any help would be greatly appreciated!!
    Sincerely,
    Stewart

    You could have a bad install. There's a thread/threads around here talking about the viewer being all white due to a bad install of the program or a corrupt user. I've also heard it manifest with a black screen instead of white.
    Quickest thing to check. Create a new user account. Log in there, and open Motion. If Motion opens fine, then you have a problem with your normal user account.
    Andy

  • How can I show embedded video in powerpoint on phone?

    I have embedded video in my powerpoint using Office 365 on my desktop.
    The video plays fine on my desktop but it does not play on my phone.  It
    simply shows the video as a picture.  Does anybody know what the problem is?  Thanks.

    Hi
    Did you use Windows Phone? Iphone? or Andriod?
    Remember to click Insert(rather than link to a file) when you try to insert a video.
    Convert the format of your video to avi to check the issue.
    Since it is the forum to
    discuss questions and feedback for Microsoft Outlook, better to post your question to the forum for your certain phones:
    Windows phone:http://answers.microsoft.com/en-us/winphone
    Regards
    Tylor Wang
    TechNet Community Support

  • NOT ABLE TO PLAY YOUTUBE VIDEOS

    I have installed latest flash player latest Firefox and all the necessary add ones but not able to play you tube videos it shows a error message(An error occurred please try again later) but I can play videos from all the other sites like yahoo and Facebook.

    Dear Saeed,
    I mentioned in my previous comment that I have already Re installed latest flash player latest Firefox and Clear all the cache and cookies but not able to play you tube videos it shows a error message(An error occurred please try again later) but I can play videos from all the other sites like yahoo and Facebook.
    So Please tell me something new something that really works.

  • Monitor not able to connect with Dell Laptop

    Hi,
    I have a dell Laptop Dell inspiron 3521 this has got only an HDMI Port as output, I can connect this laptop to other monitor, & TVs with HDMI but cannot do so with my HP2311F Part number LA176AA. I have also tried to connect the latptop using a HDMI to VGA convertor.
    Manish

    Hello Manish_Das,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I see that you are not able to connect to your HP monitor, and I would be happy to assist you! To begin, I will need to ask you a few questions:
    What version of Windows do you have installed on your computer?
    Has your computer completed all of its important Windows Updates?
    Are you able to connect your monitor to a different computer?
    In the meantime, I recommend following this document on when the Monitor is Blank. This should help diagnose any possible connection or hardware issues that may be present. In addition, I also suggest downloading the HP 2311f 23 inch Diagonal LED Monitor Drivers for your laptop.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • File Monitoring - Not able to see File Path on the Detail Information Tab

    Hi Experts:
    I am setting up the "File Monitoring" in the Solution Manager. I am having STA/PI01L_CRM570 on the Solution Manager.
    And on the Satelite System - ECC I have STA/PI 01L_ECC600
    While I am setting up the parameters, I am supposed to provide the file path in "Detail Information" tab page.
    But I am just able to see two tabs:
    Count    and Short Text (optional).
    I checked all the other tab but not able to locate where I need to provide the file path.
    Can any one let me know, If I am missing anything or do I need to do any further steps.
    Similarly for the File Size setting:
    I am not able to see where I can define The parameter "File Pattern (e.g. *.log, *.txt or any string)" is mandatory.
    Pls let me know.
    Regards
    John

    Hello Johns,
    You can find the FilePath in the 'Detail Information' tab if you double click the initial and predefined counter 001.
    Best regards,
    Goncalo Mouro Vaz

Maybe you are looking for