EXT3-fs error (device sda6): in CONSOLE of CUCM 9.1

                   Hello my friends,
After several days of having my CUCM working properly, the CUCM show me EXT3-fs error (device sda6): xxxxxx , my TFTP service is down and never go UP again. I restart the server and the problem didnt go away.
Any idea whats going on????
Someone know what troubleshooting can i do?
I appreciate your help....
CUCM 9.1
ESXi 5.1
Attache the ERROR

Hello Jaime,
I do have the backup, but i didnt do the recovery, i reinstall all the server again, rigth now its good and all the services are UP. But what if it happens again. =(
Are you sure nothing happened to the server or wherever you have the vmdks???
The server does not show any kind of alerts. 
Im goint to download some infomation from the console of the server just to check everything its fine with the vmdks.
Have you heard about a BUG in ESXi5.1 when you install CUCM 9.1 ??
Thanks for you answer

Similar Messages

  • (Read-only file system) ,EXT3-fs error (device sda6) in start_transaction, FOR MY MCS7825I3-K9-CMC1

    I got this problem for my cucm version System version: 7.0.2.20000-5
    Product Part Number: MCS7825I3-K9-CMC1
    java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only file system)
    log4j:ERROR No output stream or file set for the appender named [CLI_LOG].
    EXT3-fs error (device sda6) in start_transaction: Journal has aborted   SeverityMatch - Critical kernel: EXT3-fs error (device sda6) in start_transaction: Journal has aborted   SeverityMatch - Critical kernel: EXT3-fs error (device sda6) in
    Any Advice to solve this issue ?
    Kind Regards
    Mohammed khamis
    java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only file system)
            at java.io.RandomAccessFile.open(Native Method)
            at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
            at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(c                                                                            iscoRollingFileAppender.java:100)
            at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoR                                                                            ollingFileAppender.java:43)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.                                                                            java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces                                                                            sorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at org.apache.log4j.config.PropertySetter.setProperty(PropertySetter.jav                                                                            a:196)
            at org.apache.log4j.config.PropertySetter.setProperty(PropertySetter.jav                                                                            a:155)
            at org.apache.log4j.xml.DOMConfigurator.setParameter(DOMConfigurator.jav                                                                            a:530)
            at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.ja                                                                            va:182)
            at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurat                                                                            or.java:140)
            at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfi                                                                            gurator.java:153)
            at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOM                                                                            Configurator.java:415)
            at org.apache.log4j.xml.DOMConfigurator.parseRoot(DOMConfigurator.java:3                                                                            84)
            at org.apache.log4j.xml.DOMConfigurator.parse(DOMConfigurator.java:783)
            at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java                                                                            :666)
            at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java                                                                            :616)
            at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java                                                                            :584)
            at org.apache.log4j.xml.DOMConfigurator.configure(DOMConfigurator.java:6                                                                            87)
            at sdMain.main(sdMain.java:511)
    java.lang.NullPointerException
            at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.updateIndex(ci                                                                            scoRollingFileAppender.java:117)
            at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.nextFileName(c                                                                            iscoRollingFileAppender.java:92)
            at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.append(ciscoRo                                                                            llingFileAppender.java:74)
            at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:221)
            at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders                                                                            (AppenderAttachableImpl.java:57)
            at org.apache.log4j.Category.callAppenders(Category.java:187)
            at org.apache.log4j.Category.forcedLog(Category.java:372)
            at org.apache.log4j.Category.info(Category.java:674)
            at sdMain.main(sdMain.java:525)
    log4j:ERROR No output stream or file set for the appender named [CLI_LOG].
       Welcome to the Platform Command Line Interface
    admin:java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only f                                                                            ile system):java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only f                                                                            ile system)

    Hello
    Thanks Manish .
    I found many articles in cisco which says that this error is related to the bug which need firmware upgrade , but I don't have support from cisco because EOS.
    https://supportforums.cisco.com/document/49511/updated-16-february-2011-ibm-7816-i4-782x-i4-filesystem-errors
    Solution
    The file-system going read-only issue which has recently been affecting server models MCS-7816-I4, MCS-7825-I4, and MCS-7828-I4 (or their IBM equivilants) in the field is addressed by CSCti52867 - "IBM 7816-I4 and 782x-I4 READONLY file system".
    The fix for CSCti52867 is now available and requires the application of two patch files.  Install both of these patch files in the order listed below.
    1. First install ciscocm.ibm-diskex-1.0.cop.sgn 
         The Readme file ciscocm.ibm-diskex-1.0.cop.sgn includes installation instructions for this .cop.sgn.
         Make sure to only install this utility when show hardware CLI output indicates the array is in a healthy state.
         If your server has never had the filesystem go readonly then this step is optional. 
    2. Next install Cisco-HDD-FWUpdate-3.0.1-I.ISO .
         The Readme file Cisco-HDD-FWUpdate-3.0.1-I.Readme.pdf includes installation instructions for this ISO.
         This installer is completely independant of the OS installed on the server.
    Note:  Installing the FWUpdate v3.0(1) or later will get you firmware with the fix for this defect.  It is always recommended that you apply the latest FWUCD available for your server.
    Refer to the Release Note of CSCti52867 and the Readme file for each of the above mentioned patch files for more details.
    Symptoms
    The file system goes READONLY, then CUCM services may go down, the server may become "unresponsive" meaning that it is not possible to ssh into the server, login to the console, or web into the server although it may still respond to pings.
    Traces from all services stop writing (including syslog)
    You see the following error on the server console
    EXT3-fs error (device sda6) in start_transaction: Jornal has aborted

  • EXT3-fs error

    Hy
    I have a strange problem right now.
    I set up a new Arch installation some days ago...
    I went away, some hours, and as I came back, nothing worked.
    At least, nothing that wasn't loaded in the memory.
    So I have a shell now (bash), and cannot start anything.
    Everytime I wan't to start something (like init, less, cat, etc.), I get this error message:
    [cimnine@anti-1 ~]$ ls
    EXT3-fs error (device sda3): ext3_find_entry: reading directory #16321 offset 0
    EXT3-fs error (device sda3): ext3_find_entry: reading directory #595681 offset 0
    -bash: ls: command not found
    [cimnine@anti-1 ~]$ init 6
    EXT3-fs error (device sda3): ext3_find_entry: reading directory #16321 offset 0
    -bash: /sbin/init: No such file or directory
    When I hardreset my PC, the device sda3 doesn't even get recogniced by the BIOS anymore. I have to connect the disk with another SATA-Port.
    My PC:
    Mainboard: Asus R.O.G. Striker II Formula // BIOS: 0902
    CPU: Intel Core 2 Quad Q6600 GO
    Harddisk: Samsung HD103UJ
    I never came across a similar problem - I have absolutly no glue what I could do.
    ~Chris

    Rehto wrote:
    mcover wrote:I have an Asus Laptop and I used to have problems connecting a hard-disk to my eSATA port. It was problems with resources and IRQ allocation, but it somehow fixed itself with continuing upgrades (kernel?). Thou recently I had a problem where I was using my hard-disk and then randomly the system tells me that the disk does not exist anymore and after checking dmesg I saw that it was the same problem again (something about reseting the SATA port - sorry don't have log anymore).
    I'm having a problem similar to yours when using an eSATA port to connect my external hdd. When moving files the transfer suddenly stops and I get these messages in dmesg and /var/log/messages
    http://pastebin.ca/1340177
    http://pastebin.ca/1340183
    I'm using x86_64 updated to the latest stable...
    Yup, thats exactly what I've been getting as well. However, as mentioned, I haven't had the problem for over a month now (regularly using eSATA).
    Just to check my theory, could you look at your /proc/interrupts ? I suppose it is also some bug with ahci - not just the hardware its running on.

  • Error message while starting Console

    Dear All,
    I am getting given below error message while starting Console.
    Start Failed :2
    Invalid Credentials.
    tell me the solution

    Hi Pavan,
    Check if you're connected with <SID>adm on OS as said Pinkle and if that user belongs to administrators group.
    If yes you can check if the SAP<SID><Instance_number> and SAPOSCOL are started (and in automaticaly start mode).
    Regards,

  • Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block fail

    Hello OTN,
    After converting/exporting machines from VMware and importing them into OVM i am receiving errors on some of the machines when powering on.
    Here is the complete error message:
    Start - /OVS/running_pool/dirkwin
    PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/machinename/vm.cfg'] => Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block failed; error detected.
    >
    StackTrace:
    File "/opt/ovs-agent-2.3/OVSXXenVM.py", line 57, in xen_start_vm
    run_cmd(args=cmd)
    File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
    raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
    >
    StackTrace:
    File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 131, in start_vm
    raise e
    Searching for this error turned up different solutions but none of them worked.
    One mentioned OVM not being able to handle spaces in vm names but this is not a working solution as most of the machines are just regular names without spaces or special characters.
    Also interesting, sometimes this error does not turn up when powering on BUT the machine just powers off again and returns to its turned off state. Next power on the error returns.
    OS types vary from S10, Win XP and RedHat so a possible connection to the error being the host OS is not there.
    Harddrive types are set to auto. The vm.cfg's of functioning machines do not differ from non functioning machines besides the actual vm name in the vm.cfg
    Any idea to this error or how to solve it ?
    Thanks
    -Stephan

    Hello Sebastian,
    This is one of the vm.cfg which will abort due to the above mentioned error:
    acpi = 1
    apic = 1
    builder = 'hvm'
    device_model = '/usr/lib/xen/bin/qemu-dm'
    disk = ['file:/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/vmname/vmname.img,hda,w',
    ',hdc:cdrom,r',
    kernel = '/usr/lib/xen/boot/hvmloader'
    memory = '2048'
    name = 'vmname'
    on_crash = 'restart'
    on_reboot = 'restart'
    pae = 1
    serial = 'pty'
    timer_mode = '0'
    usbdevice = 'tablet'
    uuid = 'a2a62bcb-f9ab-4ec3-8574-7415985cdf0a'
    vcpus = 1
    vif = ['bridge=xenbr0,mac=xx:xx:xx:xx:xx:xx,type=ioemu']
    vif_other_config = []
    vnc = 1
    vncconsole = 1
    vnclisten = '0.0.0.0'
    vncpasswd = 'xx'
    vncunused = 1
    The xend.log also turned up nothing concerning this error. no messages were written into it. No other log has been created by xen in the /var/log/xen directory concerning an issue with the current machine.
    Thanks for your help !
    -Stephan
    ps:mac address + pw is commented out
    Edited by: Stephan Becker on Aug 5, 2010 7:11 AM

  • Error while starting of Console

    Dear All,
                 I am getting given below error message while starting Console.
    Start Failed :2
    Invalid Credentials.
    tell me the solution.

    Check your <sid>adm password and also your SQL Server database username password.
    Thanks
    Adil

  • I am getting the below mentioned error in the weblogic console.  Jun 26, 2014 12:14:45 PM IST Error javax.enterprise.resource.webcontainer.jsf.application BEA-000000

    Hi,
    After migrating to Spring webflow 2.4.0 , I am getting the below mentioned error in the weblogic console.
    <Jun 26, 2014 12:14:45 PM IST> <Error> <javax.enterprise.resource.webcontainer.jsf.application> <BEA-000000> <Unable to determine expected return type for java.util.List()>.
    It doesn't affect  the application but not able to find the cause for it.
    Regards,
    Sneha

    After many hard working days.i finally found the error cause,i needed to make weblogic datasource also ADF doesnt work on internet explorer browser,it works on safary.hope it helps somebody

  • Error when starting weblogic console appl in browser

    I am getting this error in the weblogic console. Can anybody help me to get
    rid of this error? I am trying this URL:
    http://localshot:7501/console/index.jsp
    <Nov 1, 2001 1:57:17 PM PST> <Error> <HTTP>
    <[WebAppServletContext(25297842,cons
    ole,/console)] Error loading servlet:
    "weblogic.management.console.webapp._index
    java.lang.ClassNotFoundException: weblogic.management.console.webapp._index
    at
    weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClass
    Loader.java:178)
    at
    weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAw
    areClassLoader.java:65)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
    at
    weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAw
    areClassLoader.java:43)

    Hi John,
    Might be a configuration error. Could you tell me which version, including
    service-pack level, of WLCS/WLPS and WLS that you are running? sp2 for WLCS
    3.5 removes console.war from your WLCS installation. That is because WLCS 3.5
    sp2 is the port from WLS 6.0 to WLS 6.1. In WLS 6.1, there is no console
    application because it became internal.
    John Smith wrote:
    I am getting this error in the weblogic console. Can anybody help me to get
    rid of this error? I am trying this URL:
    http://localshot:7501/console/index.jsp
    <Nov 1, 2001 1:57:17 PM PST> <Error> <HTTP>
    <[WebAppServletContext(25297842,cons
    ole,/console)] Error loading servlet:
    "weblogic.management.console.webapp._index
    java.lang.ClassNotFoundException: weblogic.management.console.webapp._index
    at
    weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClass
    Loader.java:178)
    at
    weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAw
    areClassLoader.java:65)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
    at
    weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAw
    areClassLoader.java:43)--
    Ture Hoefner
    BEA Systems, Inc.
    2590 Pearl St.
    Suite 110
    Boulder, CO 80302
    www.bea.com

  • IOS 7 ugrade failed " Error:Device disappeared during timed transition". Phone will not now turn on or sync with itunes, any ideas please?

    iOS 7 ugrade failed " Error:Device disappeared during timed transition". Phone will not now turn on or sync with itunes, any ideas please?

    if a Mac OSX Computer is in near - try iBackup Viewer.
    This is free of charge and can read your backup.
    and thats the main difference. Those tools are reading the saved Data in the backup
    but itunes attempts to restore the data from the backup on your iphone. if there are any corrupted data in the backup - the backup restore goes wrong. this can happen during security software or wrong corrupt data already stored on the iphone.
    if itunes messed up to restore from backup try this one :
    - restore your iphone to factory settings using HT1808 or reset all settings and content direct from iphone
    - rename your iPhone (e.g. iPhone Test)
    - setup your iPhone as new device -> attempt to make a new backup - if successful -
    - click in itunes on restore from backup... and choose your desired backup
    or go to:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(Username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista - Windows 7: \Users\(Username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Pull your complete BackupFolder and try a different PC - copy the BackupFolder on this different PC in the same Path above - start iTunes and see if your Backup is there - attempt to restore from Backup again

  • Error import / export in console standalone

    hai all,
    error import / export in console standalone
    iam logged in 9i console standalone pc not connected any other pc.
    unable to import or export or load any database
    because the error shows that
    only on OMS mode is possible
    how can import or export or load?
    any help?
    thanks in advance
    rcs
    ------

    I have no idea what you are asking or in what environment you are work.
    Lets start with the need for a version number ... 9i is not a version ... it is a marketing label. Do you mean 9.0.? or 9.2.0.1 or 9.2.0.8 no one knows.
    Second I have no idea what a you intend to convey with the statement "console standalone pc."
    Third "unable" means what? That the pc crashed and burned and is a smoldering cinder or you received some error message you thought too unimportant to post? Again ... you've given us no useful information.
    Finally what do you mean by OMS? Is this OMS as in the Java application running as part of the Grid Control or something else?
    Finally what are you trying to import? How? A clear explanation is required.
    If someone reading what you post can not understand or duplicate what you did because of lack of information you will not receive any help.

  • Newbie to applets! error message in java console

    hi, i'm kindof new to this, i've created a simple "hello world" applet!
    it doesn't seem to find the class! i've even put it in the bin dir of java. i'm using 1.4
    error message in java console:
    Java(TM) Plug-in: Version 1.4.2_01
    Using JRE version 1.4.2_01 Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\mark gandolfo
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    o: trigger logging
    p: reload proxy configuration
    q: hide console
    r: reload policy configuration
    s: dump system properties
    t: dump thread list
    v: dump thread stack
    x: clear classloader cache
    0-5: set trace level to <n>
    load: class FirstApplet.class not found.
    java.lang.ClassNotFoundException: FirstApplet.class
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.FileNotFoundException: C:\Program Files\Java\j2re1.4.2_01\bin\FirstApplet\class.class (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(Unknown Source)
         at java.io.FileInputStream.<init>(Unknown Source)
         at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
         at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 10 more

    :) never mind, stupid mistake! (another) but i'm sure there will be more!
    quick question though (so i dont' waste the thread)
    when i close my browser when i've loaded my own applet, the browser eats resources to the point where it freezes my AMD2.4ghz 512mb ram computer! :(
    any suggestions?

  • Error in running the console in browser

    I am also getting the same problem as smith,
    for [wlserver6.1 with SP1, wlportal4.0, ebcc4.0, Windows NT4.0]
    the server has been started successfully,
    but if i try to start the console in the browser using(http://localhost:7501/console/index.jsp)
    am getting classnotfound exception, the
    stack trace is as follows,
    <Dec 14, 2001 5:54:50 PM IST> <Error> <HTTP> <[WebAppServletContext(7417844,console,/console)] Error
    loading servlet: "weblogic.management.console.webapp._index"
    java.lang.ClassNotFoundException: weblogic.management.console.webapp._index
    at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:178)

    You have created a EmployeeEO which must be based on some table. Can you please check that this table has who columns or not.
    Who columns are:
    Created_by, creation_date, last_updated_by, last_updated_date, last_update_login
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Cache entry not found error message in java console 1.6.0_05 - Citrix ICA

    Client information:_
    Windows XP_SP2
    Java Runtime version 1.6.0_05
    Application: Citrix ICA version 9.4.1868
    Slow citrix ICA client connection, repeated errors in the java console stating "cache entry not found". However when I downgrade to Java Runtime version 1.5.0_10 I do not see the "cache entry not found" errors and the Citrix ICA connection is much faster. Basically launches and connects in 10 seconds versus 2 minutes.
    Any ideas? Thanks!

    Hi,
    All your classes must be accessible through the web. The easiest solution is to put all your classes in the same folder as your web page.
    If your classes are in a different folder (which must be mapped as a virtual directory), try adding the codebase attribute to your applet.
    Regards,
    Kurt.

  • I am unable to see a newly added PC under devices in SCCM2012R2 console

    Hi,
    I am unable to see a newly added PC under devices in SCCM2012R2 console. Plz help me how to add a system to SCCM2012R2 console

    Where and how have you added computers? Computers are added when the ConfigMgr client is installed or by a discovery method.
    Torsten Meringer | http://www.mssccmfaq.de

  • OEM12c jobs fail with "Error attempting to invoke console command"

    Hi gurus,
    I'm wondering if someone could help me on this issue.
    When I try to execute a job it remains in "Running" state for a long time periord and looking at the jobs details I can see something like this:
    Execution: DB11G.WORLD
         DB11G.WORLD     Running     Aug 29, 2012 10:17:31 AM GMT+02:00          57.9 minutes
    Step: DeployDriver     DB11G.WORLD     Scheduled
    Doing drilldown in "Scheduled" hiperlynk the message displayed is that:
    Error attempting to invoke console command, retrying
    And this is the Tip offered by oem:
         TIP:      Management Service from which the job step was dispatched.
    Everything seems to be working even the Management Service, but any job launched fail in the same way.
    Environment:
    Oem12c 12.1.0.1.0 with last patch
    Oracle Linux 5.7
    DB Oracle 11gr2
    Any suggestion on this issue will be welcome.
    Thanks,
    Carlos.

    Thanks Eric for your feedback.
    It seems that the problem was related with target "Oracle Authorization Policy Manager" because this target was down and after restart OMS and check that this target was up again all pending jobs worked and finished.
    However the job_queue_processes value was a good point to take into account so I increase this parameter just in case.
    Thanks,
    Carlos.
    QUERY STATUS = SOLVED

Maybe you are looking for