Extend airport extreme with airport xpress

I would like to extend my Airport Xtreme wich get a Wi-Fi from Bell to s a remote Airport Xpress using Airport on a Windows 7

I'm curently using the folowing confguration successfully:
Airport Extreme connected to my main service provider(TW), configure to support two other airport express devices (bridged configuration) within my household. I have an external 2Tb drive conncted to my AirportExtreme as a network drive supplying access to both Mac's and PC'.(https://discussions.apple.com/thread/4681131)
Hope this helps you get started.

Similar Messages

How do I extend a network with an AirPort Extreme from an Arris TG862?

I'm using Comcast as my ISP, and after some issues with a previous Motorola modem, they supplied me with an Arris TG862 Router/Modem combo tower. I have two AirPort Extremes, one of which was previously connected to the old Motorola modem to send wireless into the house, but it only reached halfway, so I had the other AirPort Extreme in the middle of the house to "catch" the signal and then broadcast it out to the rest of the house. This worked fine for a while.
But with the new TG862, it doesn't seem to be an option. From what I've read, if I have the TG862 in one room (connected to the cable), AirPort Extreme #1 in the middle of the house, trying to join the existing network (or extend it?), and AirPort Extreme #2 in the far end of the house (to extend from AirPort #1), it won't work. Apple's "extension" technology isn't compatible with all other modems or routers, and even if it was, I'd have to somehow configure the TG862 to "allow to be extended."
So my question is, IF there is a desktop utilizing the TG862 as a direct connection (because it has no built-in Wi-Fi), is it possible to put the TG862 into bridge mode, connect one of the AirPort Extremes and have it act as the router so I can use AirPort Extreme #2 to extend that network out to the rest of the house? I want to ensure the desktop still has a connection, but there's Wi-Fi that actually goes out through the whole house.
The connected-to-the-cable-desktop is a PC; we have multiple iPhones, iPads, and anywhere from 1 Mac laptop to 1 iMac in the house at any given time.

pcbjr wrote:
Topic title pretty well sums up the question.
I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
So, can the Extreme act as an "extender" only, in lieu of using an Express?
Hiya.
You can absolutely extend a network with an Extreme. I've got a 5th gen. Extreme extending a network created with a 3rd gen. Time Capsule. On the Extreme, you'll have the option to allow (or not) WiFi clients. I recommend having all units updated to the current firmware (7.6.1 as of this writing). Note that extending doesn't work in daisy-chain fashion, meaning that your Expresses or Extremes will each connect to and extend from the TC. As such, you'll want the TC to be in as central a location as possible to offer the best coverage.

Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme..

Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme.

This will work.....IF....you also have an Apple AirPort router configured to provide your wireless network.
In other words, you need to have two Apple AirPort routers to extend a wireless network.
When the AirPort Extreme is configured to "extend" the wireless of the "main" AirPort, it will provide more wireless coverage and the Ethernet ports are enabled, so you could connect your Mac Pro to any of the Ethernet ports and use that as a network and Internet connection.

How to extend airport extreme area with tp link 740n

i just bought an airport extreme, but it doesnt reach the swimming pool area. i have a Tp-link 740N, here. can i use it? and how can i configure it?
thx

The only way to extend the range of a non-Apple base station is to connect it to your Extreme with an Ethernet cable.
Its range cannot be extended wirelessly.

Help! Im trying to extend the network on my Airport Extreme with an Express

This is probably such a begginers question but it has truely boggled my mind for the last 24 Hours!
I have brought an airport express to extend my airport extreme network. My Airport extreme is the base and is hooked up to my initial Home model from my ISP which works fine.
I have been trying to connect my airport express and am having no luck. I have plugged the airport in but am having no luck locating it on my airport utility (only my actual Airport Extreme shows)
Can someone please help me Ive been here for hours reading on forums trying to sort this out and Im gettin nowhere fast!
The light on the express is flashing orange. I have tried to reset it but there still is nothing showing.
any ideal on what i could do or follow step by step?

Ok, the question is how can i extend the range with
my airport extreme base,
With an Airport Express or another Airport Extreme
I have A netgear WNP802, it
has a repeating feature.
Which won't work with your Airport Extreme
< But i am wanting to have the
netgear and the apple airport extreme talk to each
other so that i can put the net gear in a seperate
room to extend the range of signal. </div>
This is not possible.
How can i do this?
You can't.
Netgear and Apple use different chips which means they won't and can't talk to each other when it comes to extending networks.

Extend new airport extreme with 2 additional airports

Hi,
Just got a brand new airport extreme (ac model) and this is now my setup:
1. New Extreme is main router
2. Older 4th gen Extreme is extending main Extreme
3. Airport Express N (1st gen) is extending older Extreme
Things seem to work but when using iStumber for testing (normally what I do) I only see 4 networks not 5. I do not see a network for my Express although it seems that I have a connection there based on signal strength. Both extenders have green lights (and of course the main), but I'm a bit confused by this. I have my network with a different name for 5GHz (didn't realize older Extreme would extend both bands but seems to be the case), but I'm only intending to extend the 2.4GHz band with the Express. Also funny thing is when I'm near my Express in iStumbler the strongest network seems to be the 2.4GHz band from my main router which should be impossible since I'm too far away. Unless when being extended now the Express is being masked to appear as my main router? But this was never the case before when I only had one extender...
Ok hope this makes sense can someone please educate me on this thanks for your time,
rc

I thought you could put more than 2
You can....but each extender must communicate directly to the main router. Apple's extend feature works like the hub and spokes of a wheel.
Your new AirPort Extreme is the "hub". The old Extreme resides at the end of a "spoke", and as such it communicates directly to the "hub".
You can have other extenders at the ends of other "spokes", but each one of them communicates directly to the "hub"......not to another extender at the end of another "spoke".
So even thought Extend is selected it just functions as Join?
Yes, if you try to make it connect to another extender.
Should I just change it to Join?
Up to you. it does not matter.
And now if I can only use the 2 Extremes since they are both dual-band there is no reason to really have separate names is there?
Again, up to you. Things are a lot simpler though, if you use just one network name.
in the Airport Utility overview sometimes all 3 airports are coming stacked on top of each other and sometimes my new Extreme is on top and the older ones are side by side underneath does this make a difference?
First, I hope you are not using AirPort Utility on an iPhone or iPad, because things do not always appear accurately on those devices.
The "new" Extreme" should be at the top of the stack. The old Extreme with a dotted line between the new and old indicates that the old Extreme is connecting using wireless and extending.
If the Express appears side by side with old Extreme, it is extending. If it appears under the old Extreme, then it is connecting to the old Extreme and it is not extending.
If you experiment with the location of the Express, you might be able to get it to extend the new AirPort Extreme. It will help if it is closer to the new Extreme than it is to the old Extreme.

Can I extend the range of my Airport Extreme with 2 Airport Express units?

I am using Airport Extreme as my basic router. I have connected 2 airport express units (all new since 12/09) to extend the network about 300 ft into another building to a PC. I am receiving about 65% signal and only one of the express units is extending the signal. Previously I was able to extend the network with a Netgear router and one D-Link extender and achieved 85%.
I would like to use the 2nd express to extend the signal of the 1st express which is extending the Extreme.
If this is not possible, can I use something other than an express with the extreme to extend the wireless network?

Here are the basic steps in setting up a static WDS. Please compare them to what you have done to see if there are any differences. Hopefully, this will give you a clue on what to try.
AEBSn - WDS Setup
(Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. Also, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
Main Base Station Setup
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
o Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the main base station, and choose Manual Setup from the Base
Station menu, or double-click the base station to open the configuration in a separate window.
o Enter the base station password if necessary. If the base station is using the
default password of public, you will not be prompted for a password.
o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the base station you want to connect to this base station.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as a remote base station.
o Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the remote base station, and choose Manual Setup from the Base Station menu.
o Enter the base station password, if necessary. If the base station is using the default password of public, you will not be prompted for a password.
o Enter the same network password as the main base station, if necessary.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
Relay Base Station Setup
o Click the AirPort status menu in the menu bar to join the wireless network created by the base station you want to set up as the relay base station.
o Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the relay base station, and choose Manual Setup from the Base Station menu.
o If the base station is using the default password of public, you will not be prompted for a password.
o Enter the same network password as the main base station, if necessary.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS relay” from the WDS Mode pop-up menu.
o Enter the AirPort ID of the main base station in the Main AirPort ID field.
o Click the Add "+" button and enter the AirPort ID of the remote base station this relay base station will connect to.
o Click Update to transfer the new WDS settings to the relay and remote base stations.
(ref: Pages 42-46 of "Designing AirPort Networks.)

Can i extend the range of an airport extreme with another airport extreme and use the ports on the airport extreme i used to extend the network?

That seems like a complicated question.
I have a Time Capsule (which the HD *****, but that is matter for another discussion) and want to extend the range with an Airport Extreme because I have 2 devices in one room that do not do wireless but have Ethernet ports.
The room has iffy WiFy connectivity too.
I want to know if the 3 ports on the Airport Extreme still work after configuring it as an extender rather than a router.

The thing is that I want to know if I can put the Airport Extreme at the edge of the room where the existing Base does not reach.
This will not work.
Remember, an "extending" AirPort can only extend the quality of wireless signal that it receives. For that reason, it must be located where it can receive a strong wireless signal in order to work effectively.
For example, let's say that your "main" router was on one end of the house and you want to extend the signal to reach the other end of the house. In this case, you would locate the "extending" AirPort about half way between the main router and the other side of the house.

Extend existing network with Airport extreme and 3 airport express.

I want to extend an existing network (thomson TG787v) with an airport extreme (MD031Z/A) with 3 or 4 airport express(MC14Z/A)
The thomson is the router from the provider and must be used. The building is an old mansion with a lot of brick walls
I tried to connect the extreme with an ethernet cable (in bridge mode) and then connect the airport express in a line to have wifi in all rooms of the mansion.
But somehow the airport extremes cannot extend the network.
Can anyone tell me how to setup the apple devices to make this work?
Thanks
Bernhard

I tried to connect the extreme with an ethernet cable (in bridge mode)
This is the correct.
and then connect the airport express in a line to have wifi in all rooms of the mansion.
Apple's "extend a wireless network" feature will only allow you to "extend" the signal one time. So, the first Express would connect to the AirPort Extreme wirelessly and extend the signal.
But, you cannot "extend" the signal a second or third time. Each AirPort Express must be located so that it connects directly to the AirPort Extreme. In other words, each AirPort Express must be located about the same distance from the AirPort Extreme.
Another way of thinking about his is to visualize the hub and spokes of a wheel. The AirPort Extreme would be located at the "hub". Each AirPort Express would be located at then end of a "spoke". As such, each AirPort Express communicates directly to the AirPort Extreme.....not to another AirPort Express at the end of another hub.
You may need to consider installing Ethernet cable to each location where you will need an AirPort Express and configure the network that way. Performance wise, this is a much better way to "extend" the network.

Simple directions to extend airport extreme with airport express?

I can't believe how complicated this has turned out to be. The apple page directions are totally outdated (looks like Tiger) and every online explanation seems to involve older g routers.
I have the latest airport extreme n (not a time capsule) as my main wireless router, and an airport express n which I just bought from apple to extend the wireless signal in my house.
While my Airport Utility shows both routers and allows me to configure them as a bridged or extended wireless network, none of my apple products (ipad, macbook pro, imac, G5 tower) can detect it on wi-fi.
Can anyone give me a simple step-by-step explanation on how to extend my extreme's wireless signal using the express?
Thanks in advance!

+Can anyone give me a simple step-by-step explanation on how to extend my extreme's wireless signal using the express?+
Sure, here you go. You can also reference pages 43-44 in the Apple AirPort Networks Guide.
_On the AirPort Extreme (AEBS)_
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
Your Wireless Mode should already be set to “Create a Wireless Network”
Make sure there is a check mark next to “Allow this network to be extended”
Update to save changes
_On the AirPort Express (AX)_
Open AirPort Utility and click Manual Setup.
Click the Wireless tab below the row of icons
Wireless Mode…should be set to “Extend a wireless network”. If you don’t see this choice, hold down the option key when you click on the selection box
Wireless Network Name…..the name of the main AEBS network should appear as a choice. Click to select it.
Put a check mark next to Allow wireless clients
Wireless Security…...exact same setting as your AEBS
Wireless Password…..exact same setting as your AEBS
Click the Base Station tab to assign a name and device password for the AX
Click the Music icon to enable AirTunes if you wish
Update to save settings.
The real trick is to find the right location for the AX. Start with it positioned approximately 1/2 to 2/3 of the distance between the AEBS and the area you want to cover. Then experiment by moving the AX closer or further away for the best compromise in signal.
Final point. The ethernet port on on AX is active in this configuration, so if you need to connect an ethernet device, just plug it in.
Message was edited by: Bob Timmons

Airport Extreme with Airport Express as extender. It doesn't "just work".

Just installed the airport extreme base station with an Airport Express for extending the network with a home network that includes a Windows XP desktop and a MBPro. I set everything up with the MBP. My goal was to stop all the resetting I had to do with the Linksys system. The XP is near the cable modem so I plug that into the extreme directly with ethernet. The extreme is plugged into the cable modem. My MacBook Pro I connect wirelessly into the internet from about 60 feet away wirelessly (the Express works as an extender to boost the signal). It all works fine for a few minutes, then if I have to close the MBP for a few minutes, when I come back, I still have a "5 bar" signal, but the MBP won't connect to the internet. When I look at the network settings, I keep getting this error:
"Airport is connected to the network ("my network name"). AirPort has a self assigned IP address and may not be able to connect to the internet".
I have a cable moden with dynamic IP addresses. I've set everything to "automatic" and still have this problem. I think when the IP adress changes, my home network dies. It is still live with 5 bars but no internet connection. I paid $300 for a router and an extender because they were Apple products, but, ****, I almost can't even work anymore.
I guess the core of my question is, why can't I keep internet connection after I close the lid on the MBP or shut off the machine for a few minutes?
Thanks for any input.

I have a network with 2 airport extremes (the old round one and the new gigabit ethernet) and an airport express. I have seen this issue while I was setting up the network. From what you wrote, I am guessing you have the following issue:
You have 2 airports configured with the same network name and password, but your WDS is not setup corretly, hence you think it is connecting to the airport with modem attached, but it is in fact connecting to your other airport with no modem attached (hence the self assigned IP). What is happening in fact is that you have 2 seperate networks with identical names. If that is the case, you should only see one airport at a time when you open the airport utility app.
If that is in fact your problem, you have to make sure to set the main airport as WDS main and enter the MAC address for the remote base station and click update, while it is updating, rescan and the other base station will show up. set that one up as WDS remote, and enter the MAC address for the main base station, and click update. Once the update is done and both base stations have restarted, your networks will be joined and you should see them both appear in the airport utility.

Extend wireless airport extreme with airport express with through ethernet cable, extend wireless airport extreme with airport express with through ethernet cable

i want to extend my wirless range i using airport extreme upstairs and airport express down i have ethernet cable linking the two but airport express seems to go wireless and is extremly slow any help appreciated

Start with a "hard reset" of your Express - press and hold its reset button continuously, about five seconds, until its LED flashes rapidly. You will need to reconfigure all its settings.
Connect it to your Extreme with your Ethernet cable. Using AirPort Utility, configure its Internet Connection to "Connect Using" > "Ethernet" as in the following screenshot:
If it had been previously configured to "join" a wireless network and you connect its Ethernet cable to your wired LAN, you may experience what you are describing.

Can i use airport extreme as wifi range extender in conjunction with a Linksys AE4500 router

can i use airport extreme base station as wifi range extender in conjunction with a Linksys AE4500 router

If you are trying to "extend" using wireless only......Apple tells us that their "extend a wireless network" feature is designed to only work with other Apple routers.
So, in order to use your AirPort Extreme as an extender, you would need to have another Apple router.....an AirPort Express, Time Capsule, or another AirPort Extreme as the main base station.
I haven't tested the specific Linksys model that you have, but have owned and worked with several other Linksys models, none of which were compatible with Apple for the purpose that you ask about....so I would have to say that it is extremely unlikely that your model would be compatible with the AirPort Extreme.

Hi. Does anyone know how to extend the airport express and extreme with Cisco Router DPC3925. I have upgrade my wireless to 50Mbps. Thank you

Hi,
Can someone help.
I have a Cisco router DPC3925 provided by the ISP and I cannot extend my wireless with Airport Express.
Also I intend to extend it with Airport Extreme.
Please help.
Thank you.

Sorry, but your post is not clear. The topic of this thread is how to extend an AirPort Express or AirPort Extreme with a Cisco router.
This would mean that the main router was an AirPort device and the Cisco would be extending the existing network provided by the AirPort.
Is that really what you want to do?
If not, then it sounds like your Cisco ISP provided wireless router is your "main" router and you will be using the Time Capsule to extend the network.
Please start another post to tell us exactly.......
What device will be the main router providing your Internet connection and wireless network
What device will extend the network
What operating system that you have on your Mac or PC

Extending Airport Extreme N 5ghz with Express 5ghz

I have a last generation Airport Extreme (has N 5ghz but not dual band) set in N 5ghz that I would like to extend with a current generation N Airport Express. I setup the Extreme on 5ghz, hid the SSID, and allowed it to be extended. When I go to setup the Express to extend the Extreme network, it will say that the configuration updates have been saved, but it never finds the Express after it has restarted. The Express continues to have the Amber light flashing after restart.
Any ideas?

Hello everglade. Welcome to the Apple Discussions!
I suggest starting over. Please give the following instructions a try ...
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

Extend airport extreme with airport xpress

Similar Messages

Maybe you are looking for