Extend article wrt. different store which belong to different Company code

Hi experts !!!!
Would like to get u r suggesations
We have Scenario like two company codes.
In First company code we have one Distribution centre and in Second Company code we have five store
The Article we have created in distribution Center belongs to First Company code
and same Article we need to extend to all store which belong to second company code
please advice
thanks in advance

The scenario is called Cross Company Code Stock transfer.
If your company's distribution center and store belong to different company codes and you need to transfer goods from one to the other, you must create a stock transport order with document type NB. This involves the process stock transfer with billing document. As in normal stock transport orders, an SD delivery with a
specific delivery type (NLCC) is created for this combination of supplying site and document type NB. This ensures that an invoice can be sent to the store.
Read more in detail on below mention link.
http://help.sap.com/erp2005_ehp_03/helpdata/en/4d/2b917843ad11d189410000e829fbbd/content.htm

Similar Messages

Extend Customer to Different Company code?

Hi.
How to extend Customer to Different Company code?
ie, Cust1 is created with ABC company code, now i want to extend the same with XYZ company code.
in same client.
Reg,
Antaa21

Hi,
In T.Code XD01 - Select relevant account group and enter new company code.
Under reference option enter the existing customer number and sales org details click on continue button enter name and address details remaining information will be copied from existing customer and save.
Thanks,
Padmaja

Extend vendor to different company code

Hi All,
We are trying to find an Enterprise Service that fits the following requirement:
Expand an existing vendor to a different Company Code.
We are ok if we need to extend an existing ES to fit the requirement.
your help will much appreciated
Thanks.
Anindita

Hi,
XK01, enter same vendor number and enter different company code.
If you want to extend only company code then use FK01. If you want to extend purchasing level also then use XK01.
General data will be same.
Regards,
Chandra

Single Purchase Order for different Plants of Different Company Codes

Hi Experts,
I have a scenario, My Client has 3 Company Codes (1000, 2000, 3000 )
Company Code 1000 has 2-Plants    ( A001 and A002 )
Company Code 2000 has 1-Plant      ( B001 )
Comapny Code 3000 has 3-Plants   ( C001, C002, C003 )
All these 3-Company codes has centralised purchase organisation.
My Client requirement is to raise a single purchase order for external vendor, for all the plants A001, A002 which is in one company code and similarly in same Purchase Order for B001 plant which belongs to 2000 Company Code and Similarly for same purchase order for C001, C002, C003 plant which belongs to 3000 Company Code.
1)Is it possible to raise a Single Purchase to External Vendor for plants of Different Company Codes ?
2)Does it affect the accounting document ?
3)How to inward and where to inward these goods ? with respect to plant wise ?
Please Guide with Valuable inputs.
Thanks in Advance
Best Regards
Javeed
Best regards
Javeed Ahamed

1) How about Profit Centre ? We have Framed each Profit Centre with respect to Plant
Why should there be a problem?
2)In Case of Migo does we have to be careful and do stepwise MIGO with respect to different Plants ?
of course people have to be careful when performing transactions.
if you have multiple items in a PO then you can easily receive all items in one go. So people have to careful and need to check if they really received each of the PO items. Especially if people have authorization for many plants, then the user who is usually performing the receipts for plant A can easily post the receipts of plant B too.
3) How to Process MIRO ? Can we process Partial MIRO"S with respect to Line-items of those particular Plants ?
MIRO allows to post the invoice like it is send to you from your vendor. If it is just for a part of your PO then this is just a fact and MIRO allows to post this kind of invoices too.

How to extend Article to Different Sales organization

Hi experts
How to extend Article to Different Sales organization
thanks in advance

Hi Hanumant,
1. Go to MM42
2. Enter the article to be extended.
3. Enter the Sales Organization and Distribution Channel to which the article to be extended to.
4. Select the Sales View.
5. Press Enter
Save
It's Done.
To verify, goto mm43 and enter the detail and check
or
after entering the article code in mm43 go to Sales Org. field and press F4, in the popup you will see a column 'Maint.' , X should be marked in front of your new sales org,dist channel combination.
Hope it helps.
Regards,
Anirban Roy

Delivery and shipment belong different company code

Hi all,
I do shipment via transportation planning point that has different company code to delivery order. the shipment can be done, but when i was doing for shipment cost, there's an error, that said "delivery and shipment belong different company code". can you help me, what happen with this?
best regard,
Hendry

Hi Hendry,
Please read SAP online help about this:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/0b/f2ee344ecf11d2bf760000e8a7386f/frameset.htm
Regards,
Csaba

Withholding tax of vendor in different company code

Hi All,
We are facing problem that withholding tax of single vendor is being deducted correctly in one of the company code while in others, it deducts 0 tax.
Single vendor e.g. 100002 is created in Company Code 112
The same vendor is extended in Company Code 113, 114 and 115
The issue is, we have created four different invoices in different company codes. Now we are making payment by selecting four of the invoices through F-58. It deducts the withholding tax in only 112 company code, while in others its calculating wht = 0
The configuration is such that, withholding tax type '01' is used in vendor master and in all invoices. The minimum limit is set to 0 so there is not any possibility of not exceeding the minimum amount. The other thing is withholding tax is set at country level, and all of our company code belong to same country so no issue of different configuration. We also check if 'Liable' is checked in each vendor master as well as no exemption is given in any period.
What could be the possibility?
Warm Regards,
Nayab

Thank you Chandra for quick response.
I checked, everything is perfectly set. I guess there is some issue with extension of same vendor in different company codes as e.g. in new company code, same withholding tax code is applied on vendor's invoice and deducted correctly while for other vendor it is not.
Is there any thing related to vendor master?
PS: Can we check through some report if withholding tax amount on some particular vendor is exceeded with its minimum withholding tax amount, set in IMG?

"Account Assignment objects have differing company codes"

Hi,
We have parked the document through T.Code : MIR7 & now we want to post the same using the correct GL A/c.
When we try to post the document we are getting error like "Account Assignment Objects have differing Company Codes"
Can you please help me
Thanks
Ravi kumar

Please check in the document if it contains diferrent account assignments like both cost center and internal order. In this case both cost center and order must belong to same company code.
If you find the document fine, then solution is to change the error to warning using T Code OBA5 and application area KI (I assume). You should be seeing application area as part of your error message number which is usually first 2 characters.
Regards
Sreenivas

Is it possible to assign different company code employees(country grouping also different) under same Organizational Unit?

Hi SAP Experts,
In OM side, Org Unit is linked to company code "GB**" cost center, when we tried to assign new cost center(company code is GB**), system throws error "Company Code changes involves Invalid change of country". I know when we try to assign cost center, belongs to another country company code, this error comes. I checked and found that employees under OU belong to 2 different countries.Few of the employees belong to GB** company code while other employees belong to FI** company code.
Is it possible to assign different company code employees(different country code) to the same OU? if yes, how can we do that?
Please reply soon
BR,
RG

Hi RG
"Is it possible to assign different company code employees(different country code) to the same OU? if yes, how can we do that?"
Yes it is possible to assign by creating sub org unit and then assigning cost center based on the company code (and country code)
When the child org unit is created under the Parent org unit - maintain the Account assignment details - cost center details based on the company code of other countries i.e Finland and any positions created it will be under Finland and that way you can choose different countries.
Example :
Root Org unit : XYZ / OU
Sub Org units : GB / Finland / Italy / NL etc with respective cost centers
Sub Org units or positions: GB_HR / GB_Sales etc which will default the cost center from the GB org unit.
In our current clients we have more than 5 + countries under the Root Org unit and then sub org units as each country which are further divided and have respective cost centers assigned.
best wishes
V

Sharing a single checking account with 2 different company codes

Hello gurus,
My client want to use the same bank account number and bank key for 2 different company code, to upload a cashed check file through the t code FCKR. Can anyone give me any solution or we just cant use the same bank key and same bank account number for two different company codes for t code FCKR.

Sorry all,
A couple of corrections:
gail from maine wrote:
Hi all,
I'm a bit confused about this article. I was working with a poster on a question which ultimately led me to this article (as he was using the Disk method described in this article to share one Mac's iPhoto library between he and his wife).
What I'm not getting about any of it is what sort of "multiple user" scenario is this referring to? Is it specifically referring to the User accounts on a specific Mac? So, signing off one user and then signing on another?
The reason I ask is because both my husband and I have Macs, and he is always signed on to his Mac, I'm always signed on to mine. We have a bit more complicated set up in terms of syncing, because our iTunes library is housed on his computer and our iPhoto library is housed on mine. But, bottom line, when I sync my iPhone or iPad to iTunes, I do it on his computer with him signed on (most of the time on both the computer and iTunes), and when I sync his iPhone photos to iPhoto, I do it on his my computer with me still signed on. We have both libraries shared completely, with the option to sync different parts of it to our different devices.
So, in a situation where you are not needing to sign off the "primary" user of a Mac in order to update or sync your devices, does the article even apply?
I just want to get it straight so I can help this poster out with the correct information.
Thanks,
GB
Sorry about that....
GB

Create SO based on PO of different company code

Hi all,
Is there a standard set up for SO creation from a PO of different company code?
Much appreciate if you could let me know the details.
Cheers,
Kenneth

Again,
you dont need IDOCs always to create a sales order. You can also create a sales order automatically from the PO through an online job. You can discuss with your ABAPer about online job and they can be able to help you.
For IDOCs
You can enable sales order through IDOCs also. For this you have to create a message type for the PO and the transmission medium should be maintained as 6. Explaining the IDOCs fully may not be possible here. However it is easy to configure IDOC if you know message determination in MM or outputs in SD.
To know more about IDOCs you can go to the links given below. They are the best ones I have seen so far.
http://sapabaplive.blogspot.com/search/label/idocs
http://abapliveinfo.blogspot.com/2007/12/abap-idocs-basic-procedures.html
You should also discuss with the technical team on the function module which should update the IDOC. The FM needs to be developed.
Also I am updating some of the tcodes which I know of IDOCS
WE20----PARTNER PROFILE
WE20----TO INCLUDE PROCESS CODE TO PARTNER PROFILE
WE41----TO CREATE PROCESS CODE
WE21----PORT DEFINITION
SM59----RFC ADMINISTRATION
WE46----IDOC ADMINISTRATION
WE06----ACTIVE MONITORING
WE07----IDOC STATISTICS
WE09----IDOC DATABASE
WE10----IDOC IN ARCHIVE
WE08----FILE INTERFACE
WECP----CPIC INTERFACE
SM58----TRANSACTIONAL RFC
WE64----PROCESS CODES
There can be some other ways also by which you can create SO from POs, and you can get many ideas if you talk to your developer. My reply was more in the perspective of the company codes that how to determine the second ccode based on teh ccode of one document.
Please let me know if you need some more info
You can reward me if this info helps u

EXTERNAL OPERATION in a production order with different company code plant

Hi,
in my case i am having a production order with 4 operations.
0010 milling
0020 winding
0030 cutting
0040 milling
among this opearion 0030 i want to do it in a plant which is assigned to different company code than mine.
in this case whether i should proceed with PP01 Control key with opearion plant as that plant which is lieing in diffent company code or
i should specify PP02 control key saying that plant as an external vendor for me and do PR and PO for that service .
which should i follow for my case and how cost gets updated .

Hi,
For different company code, u have to specify PP02 in the routing for external vendor. In PP02 control key indicator must be set in external opn.
Before that create purchase info record.
Enter subcontract info record in routing.
after running MRP , convert the PR to PO.
Send the material by MB1B by 541 mvt
Receive the material by MIGO by 101 mvt.
Regards,
Raja sd

PO with Vendor that not belong to PO Company Code Header.

Hello MM Gurus,
When I create a PO with Company Code 0001, and the system let me selected a vendor who belongs to company code 0002. I would like to create PO with the same vendor a company code header only.
Any Suggestions please let me know.
Regads,
Hector.

Hello Charlie,
The vendor was just created in one company code(0002), and when I created the PO header data for company code 0001, the system don't send any error.
I really believe that standard system couldn't create PO with different company code. ¿It's possible in the Vendor Master Data, in particular the Purchasing Views, check some box to avoid this situation?
Please let me know,
Regards,
Hector.

Billing issue in case of stock transport between different company codes

Hi all,
In my project there are 2 different company codes - C001 & C002.
C001 has plant K101 & C002 has plant K201.
I am trying for the cross company code stock transfer. The plant K201 issues a stock transport order to plant K101. Now I created a delivery using transaction code VL10G & the system created a delivery successfully.
I did the picking & PGI using transaction code VL02N successfully.
Now I am trying to create a billing document in VF01 taking the reference of the delivery number created above but the system issues an error log stating
"0080000020 000000 The document is not relevant for billing"
The detail description is as under:
Client...................................................210
Group Number
Sales Document Number.......................0080000020
Item Number of the SD Document..........000000
Schedule Line Number..........................0016
Counter in Control Tables......................00
Message Identification..........................VF
System Message Number....................016
Output Type........................................I
Message Variable 01
Message Variable 02
Message Variable 03
Message Variable 04
Group Type.........................................F
with best regards,
Neeraj Kumar

HI ,
you just check the Billing type which is assigned for that Delivery type and also check what type of billing document it is i.e., in T.code VOFA
1)Check SD document category ,whether it is invoice or Proforma invoice,
2)check copy controls
Regards
Raghavendra

Inter company STO wtih two different company codes

Hello expert,
I am doing inter company stock transfer between two plants that belongs to two different company code. Can someone tell me if my settings are correct
Plant-A (S.org- X, DC-10, D-00) and CC-A
Plant- B (S.org-Y, DC-10, D00) and CC-B
Deinfe shipping data for Plant u2013A
u2022     Plant u2013A
u2022     Customer u2013B
u2022     Sales Org-X
u2022     DC 10
u2022     D 00
u2022     Under Control data tab, Vendor = A
Define shipping data for plant u2013B
u2022     Plant u2013B
u2022     Customer u2013A
u2022     Sales Org-Y
u2022     DC 10
u2022     D 00
u2022     Under control data tab, Vendor = B
Customer Master for Plant -A
u2022     Customer-A
u2022     CC-B
u2022     S.org-Y
u2022     DC -10
u2022     D-00
Customer Master for Plant -B
u2022     Customer-B
u2022     CC-A
u2022     S.org-X
u2022     DC -10
u2022     D-00
Vendor Master for Plant u2013A
u2022     Vendor u2013A
u2022     CC- B
u2022     P.org = 1000
u2022     Additional purch data/Extrac = A
u2022     Under control tab, Customer = A
Vendor Master for Plant u2013B
u2022     Vendor u2013B
u2022     CC- A
u2022     P.org = 1000
u2022     Additional purch data/Extrac = B
u2022     Under control tab, Customer = B
When i try to create a STO with document type NB, it says shipping data can't be determinded. Ofcourse , the material is being maintained for both plant with sales data. thank you so much for ur help.

this is because of of shipping point is not determined, maintain shipping point for the following combination
1)The shipping conditions from the customer master record (Shipping screen)
2) The loading group from the material master record (Sales/Plant Data screen)
3)The delivering plant
Regards,
Bala

Extend article wrt. different store which belong to different Company code

Similar Messages

Maybe you are looking for