Extend credit limit for particular term
On credit management,
If I want to extend credit limit for only particular from-to date, how can i do it?
I know about "credit limit seasonal factor" on OVA8, but this customization can give
only percentage base. I want to extend by amount base.
BR
Y.Kaneko
Hi,
Std SAP provides credit limit to be maintained as a seasonal factor only in %.
In case of amount based maintenance, the same has to be maintained/developed using a custom modification described in [this|credit limit; thread.
Regards,
Amit
Edited by: Amit Iyer on Sep 20, 2010 11:26 AM
Similar Messages
-
Approval for exceeding credit limit for particular bussiness partners
Hi Experts,
I am trying one approval for the Business partners for credit limit exceed.I have tried through standard Approval process by using the terms deviation from credit value as described but what should be done if i need to set it for particular business partners.
Also, in this standard query which i have tried i have defined the terms as :-
Deviation from credit limit greater than or equal to 50,000 . I have set this terms for A/R Invoice. Now when i have made the invoice for rs.5000 then also it is asking for Approval.Since the Value is defined so system should not ask for approval.
Regards-
Mona.Hi Mona,
You may try this. It may help you..
select true from ocrd where
((balance < 0) or (balance + $[$29.0.NUMBER]) < 0) and cardcode = $[ordr.cardcode]
use squere brackets near $ sign open and close both brackets insted of round brackets.
Regards,
Chintesh Soni
Edited by: Chintesh Soni on Sep 7, 2009 2:53 PM
Edited by: Chintesh Soni on Sep 7, 2009 2:54 PM
Edited by: Chintesh Soni on Sep 7, 2009 2:55 PM
Edited by: Chintesh Soni on Sep 7, 2009 2:57 PM -
Additional Credit Limit for certain period
Dear Friends,
My Client want a functionality where we can give additional credit limit for particular customer for particular duration.
Since the value for each customer will vary we cannot use credit limit seasonal factor in OVA8.
I want to maintain a Z Table with Customer No., From Date, To date and additional limit.
But how can I force the system to add this value in credit limit given in FD32 while performing credit check in sales order.
We are using the static credit check and in same functionality this additional limit value should be added if customer is maintained in Z table and if it falls within specified date.
Please advice.
Regards
MayankDear Mayank
If possible make different credit control areas.
decentralised credit management.
for each credit limit , set the credit amount.
change the credit control area for the customers as per additional credit limit .
A proper setting in FD32 , OVA8 and horizon period may give the results,
just an example-
ex1 / ex2
credit controlarea - ABC / xyz
Credit amount - 100$ / 150$
horizon period - 2months / 1month
-Jay -
I want to set dynamic customer credit limit for a customer
Hi,
I want to set a dynamic credit limit for a customer which should trigger during the time of Sales Order Creation.
Can anyone please let me know the settings one has to do to implement this process in the system ?Hi Below is the whole process for confign.
1. Transaction OB38
Check which credit control area is assigned to the company code.
Company code:
Credit control area:
2. Transaction OVFL
Check which credit control area is assigned to the sales area.
Sales area:
Credit control area:
3. Transaction XD02 or VD02
Check which credit control area is assigned to the payer.
Payer:
Credit control area:
4. Transaction SE37
Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
OB45, or the credit control area must be entered under the relevant company code in table
T001CM of the credit control areas allowed.
Company code:
Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
Which settings do exist for the sales document type used?
Sales document:
Check credit:
Credit group:
8. Transaction OVAD
Which settings do exist for the delivery type used?
Delivery type:
Credit group for delivery:
Credit group for goods issue:
9. Transaction OB01
Credit management/Change risk category
Definition of the risk category for each credit control area. This risk category can be
assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
Here, the individual credit checks for key fields
o credit control area
o risk category
o credit group are set. Take these key fields from the above settings and go to the detail
screen. In particular, check whether fields "Reaction" and "Status/block" are set
correctly. To carry out follow-up actions in case of a credit block, the credit check
status must be set (field "Status/block").
11. Transaction FD32
Credit master data for the payer of the relevant document.
Credit account:
Credit limit:
Risk category:
Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
check (static or dynamic credit limit check).
13. Transaction OVA7
Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
field "Active receivable" in Transaction VOV7.
Item type:
Active receivable:
14. Transaction V/08, Pricing
In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
determining the credit value (mark the pricing procedure and doubleclick on "Control").
Usually, the net value plus taxes is used. This way the system is determined to use this
subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
update and credit check.
You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
Pricing procedure:
Line with subtotal = 'A':
15. Transaction OB45
Which update group (field "Update") do you use in the relevant credit control area? The
default setting is "12". If you use another update group, check whether this is fine with
you. If you open an OSS message, please tell us the alternative update group.
Credit control area:
Update:
16. Transaction OMO1
Which kind of update did you choose for structure S066?
In any case, "Synchronous update (1)" has to be chosen as the kind of update.
All other settings will lead to errors.
Regds
MM -
Can v set credit limit for a vendor? if so, how?
can v set credit limit for a vendor? if so, how?
Hello
the two replies are correct that the redit limit is always used for customers. but i can give you the scenario as per the request and Amrita please correct me if i am making something wrong.
as per vendors there are three to four vendors are available for buying a material. we are not using quota arrangement but we just distribute the order based on the situations. the order is given to a vendor who is quoting low price, giving the required quality and quantity and supplying as per our need. there is one more criteria for choosing this vendor. the outstanding balance for this vendor should not cross some limit.
the limit may be based on negotiations and the some contracts' terms and conditions.
the solution for this may be that there should be one report where you can see how much we owe to each vendor. this could be possible only when we know the Vendor g/l account and the corresponding balances.
i think i have cleared the credit idea as well as given the solution. please reward if found it helpful. -
Separate credit limit for separate division
Hi,
Our client wants to provide separate credit limit for newly created division to their existing Dealers. How it could be possible through standard functional way. I thought of creating sepatrate credit control area . will it be help full ?
Regards
kaushikHi Kaushik
Maintaining the separate credit control area is also not a problem. But make sure that you are extending the customers into the new division sales area and in CMR data assign the credit control area also
Regards
Srinath -
Temporarily Increase Customer credit limit for va01
Hi,
My requirement is we want increase credit limit for customers for 1 or 2 days in temporarily basic or va01 order release purpose .
I maintained customer wise temporary credit & valid from and to dates in a z-table. How to solve this problem without using credit management FD32.
regards,
moon.Your requirement to increase Credit LImit of Customer for 1 - 2 days based on a Z-Table is not possible in SAP Standard. Also you dont want to use FD32.
Now in OVA8, Under Checks you have three Boxes for User 1, 2, & 3. There are the Enchancement Points give by SAP for you to implement your Z-Requirment in Credit Management.
You Requirement will have to be mapped in a Z-Development, speak to your ABAPer & he can write a code in User Exit which will refer your Z-Table & do the needful.
Hope this helps,
Thanks,
Jignesh Mehta -
Productwise credit limit for a customer
Hi All,
Is it possible to maintain credit limit productwise (Divisionwise )for a customer.
we sell different products like Washing machine,Air conditioner ,Refrigrator etc which we classify as division in SD Module . we want to maintain credit limit for a customer productwise.ie seperate limit for Washing Machine, Air Cond and ref etc .
same should be checked at the time of creating sales order (VA01).
If some one have any solution for the above scenario please let me know.
Thanks & Regards
MeenakshiHi,
There is no standard functionality available to have the credit limits at product level, but try to build the logics and process through the three exits available in credit Management.
Also,
You can do is set credit limit, Credit control area wise.
You can use multiple credit control area, and assign the CCA to separate sales areas ( That will represent the different Region / Products, as per your requirement).
The assignment can be done in the below path:
IMG> Enterprise Structure>Assignment>Sales and Distribution>Assign sales area to credit control area
Here for combination of Sales Organisation , Distribution channel and Division you can assign separate credit control areas.
While the Distribution channels can be defined Region wise, the Divisions can be defined Product wise.
Now in FD32, Set the Credit limit of the customer , Credit control area wise.
regards,
Siddharth.
Edited by: Siddharth Dabhowale on Jan 9, 2008 12:40 PM -
Payment/Credit Limit for Vendors
Hi SAP Gurus!
Is it possible to impose a maximum payment/credit limit for Vendors in SAP?
I saw in this forums that it can be done through Contracts but in the contracts, you have to enter a material. Is it possible that you don't have a material and the contract will encompass all the transactions of the vendor?\
Hope to hear from you soon!
Thanks in advance.Hi,
You can make use of following Features of Contract w/o materials;
Item Categories in Contracts: -
Just as with purchase orders, you can enter an item category to define the item as an external service item, a consignment item, a subcontracting item or as a free-form text item.
Item Category M (Material Unknown)
Item category M is for entering contract items without specifying the material number.
Item category M is recommended for similar materials with the same price but with differing material numbers.
Example
Consider a contract item for different types of office paper. The various types of paper have the same weight, quality, and price. However, they differ in the following respects: One type is lined, another is unlined, and another has two holes on the left side for filing purposes.
How Do You Use Item Category M?
In the case of items of category M, you enter the short text (short description), target quantity, unit of measure, and price. As soon as a contract release order is created, the material number or a short text is entered (e.g. the exact type of paper, say, two-hole punched). The system determines the net price on the basis of the gross price entered, less any discounts.
Item Category W (Material Group)
Item category W allows you to enter a material group without entering the value or quantity of the contract item. Item category W is for value contracts only.
Example
Consider a contract for cable. The contract covers every type of cable on the vendor's price list. The exact type of cable is known only at the time a specific cable is ordered.
Instead of entering an item for every type of cable the vendor is able to supply, you could enter item category W and the material group (say, CABLE). The short text would indicate that the contract item covers all types of cable supplied by the vendor.
Each release order issued against this contract would then specify the actual type and quantity of cable (for example, double-shielded coax, 1 spool) as well as the price.
How Do You Use Item Category W?
When you create the contract item, enter the item category W, the short text, and the material group. You do not enter a price or conditions for the item. However, it is possible to specify conditions in the document header. For example, you can enter a discount in the header conditions if the vendor grants a discount on all Pos relating to the contract. The discount is automatically taken into account when the release order is created.
You can enter a material number in the contract release order. The corresponding material master record must be assigned to the same material group specified in the referenced contract item. If the release order does not have a material number, then it must contain a valid account assignment, such as a cost center.
Also refer following link;
[Item Category/Account Assgt. Category in Contracts|http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm] -
Total Credit Limit for Co. code
Hi sappers,
I want to fix a total credit limit for Co. code sothat the aggregate of credit limit fixed for every Customer cannot exceed that total credit limit.There is nothing as standard that will allow you to do this.
Not sure why you would want to restrict this.
However it can be done with a bit of coding.
You will need to make sure you Credit Control Area only had the single Company Code.
You would then need to store the total amount of the Company Code in a Z table.
You would then need to use a user exit in the change and create credit master record in FD32 to check the total of all credit limits for the credit control area was not greater than your total for the Company Code.
if this is too much for you, you will have to manage this manually and report on the total credit limits for all customers in the credit control area. -
FSCM-Credit limit for group of customer
Hi all,
Please advised how to set up in FSCM-CR for the following scenario.
I would like to set up credit limit for a group of customer. such as BP A is subsidiary of BP B.
BP B have credit limit 100,000 USD. BP A have no credit limit, but using credit limit of BP A.
I known in SD-credit, we can set up credit account of customer A in FD32 equal to customer B.
Regards,
JennyHi Jenny,
'Credit account' concept in FD32 acts as credit delegation to parent account.
- this delegation turned out to be simple tool, but vulnerable to hedge group-wide credit risk.
In FSCM version, SAP has strengthen this 'week form' of risk management, which sometime has troubled us.
FSCM has two kinds of credit control models for group-level credit control;
one is main/sub model and another is business partner relationship
Suppose you prefer to 'business partner relationship model'.
* Scenario and expected result;
'business partner relationship model' is different from 'credit account' concept, in that it both credit- checks for 'BP A' and 'BP B'. However, I guess that you could achieve goal if you set as below;
firstly, map BP A and BP B as business partner relationship
(BP A is lower, BP B is higher)
Secondly, assign to different risk category; BP A to no risk category, BP B to high risk category
(I supposed both A and B has same CCA(credit segment))
Thirdly, maintain 'OVA8'(Define Automatic Credit Control) differently
eg. no risk category => no message, high risk category => error message
wish your test and verification.
Best regards,
TED -
How do you setup an approval procedure to check a shared credit limit for 2 customers simultaneously? The credit limit is shared between the 2 customers which can be linked thorugh a UDF.
Example: Joint credit limit Cust1 and Cust2: $10,000
Outstanding orders for Cust1: $5,000
Outstanding orders for Cust2: $3,000
Available credit for any of them: $2,000.
If an order exceeds $2,000 in this example, it should trigger the Approval Procedure.
Cust1 and Cust2 can be linked through UDF U_CustGroup (or any other suggested field)
What would be the Query to use please?
Thanks,
A CastriHi Gordon, thanks again for response. The UDF will link a customer to its sibling (and back). Credit limit will be set at the same value for both customers. This is how I visualize it, but I don't know if a Query would be enough:
TotAvailCredit = CreditLimit - (Balance Cust1 + Balance Cust2)
If Total from Quote or Invoice > TotAvailCredit then trigger approval procedure.
Do you still think an SDK-based development would be needed, or just a Query would be sufficient?
Thanks,
Andres -
Table for credit limit for risk category for all CCA
Hi All,
I want to know in which table I can see default credit limit which is associated to particular risk category for all credit control area.
Regards
NidhiHi Nidhi Srivastava,
Check in SE16
KNKA - Customer Master Credit Management
KNKK - Customer Master Credit Control Area Data (credit limits)
Regards
Pradeep -
Credit limit for the customer hierarchy
Hi All,
Our client needs a report to show the total Credit Limit assigned to Global customer as shown below. It will be the summarization of individual credit limits of all the customers linked to this Global Customer. It will be a BI report.
Can someboby please tell me as to how to create the credit limits for the customer hierarchy? Also, hoe to fetch these valus in the report?
Customer No Customer Name Total Credit Limit Individual Credit Limit
1000000 Carrefour 970,000,000.00
1000001 Carrefour France 300,000,000.00
1000002 Carrefour Spain 200,000,000.00
1000003 Carrefour Belgium 90,000,000.00
1000004 Carrefour Greece 85,000,000.00
1000005 Carrefour Italy 200,000,000.00
1000006 Carrefour Turkey 50,000,000.00
1000007 Carrefour Poland 45,000,000.00
2000000 Metro Group 290,000,000.00
2000001 Metro Austria 25,000,000.00
2000002 Metro France 53,000,000.00
2000003 Metro Spain 48,000,000.00
2000004 Metro Germany 63,000,000.00
2000005 Metro Switzerland 15,000,000.00
2000006 Metro UK 60,000,000.00
2000007 Metro Portugal 26,000,000.00
Regards,
RaghavHi,
Credit limit is maintained on payer level and you are not able in standard to split it between sold-to or assign N sold-to to one global limit. You have to extend the credit control functionality to check the credit limit additionally for the global limit customer. Unfortunatelly you cannot implement it without development.
Regards,
Marcin -
Here is my problem description:
Please forgive me if this is not the right forum or this is solved earlier. Pl guide me in these cases.
I am trying to solve this problem from external program, so I can use only remote enabled RFCs/BAPIs.
The problem is this. I want to be able to simulate Sales Order from Credit Checking point of view.
I don't want to save order but want to know if credit check would pass if I saved the order.
I am able to get error "Credit limit exceeded" in the GUI with all correct settings, but when I call BAPI_SALESORDER_CREATEFROMDAT2 it does not give any error
for the credit limit.
I have not even tried simulate because the BAPISALESORDER_CREATEFROMDAT2 itself does not fail.
Any settings or parameters to be supplied for causing credit limit checking thru BAPI ?
Thanks in advance...Any one else can help ?
If you do not know the correct answer and still answer, the question gets hidden from other potential help.
Here is my original post...
Here is my problem description:
Please forgive me if this is not the right forum or this is solved earlier. Pl guide me in these cases.
I am trying to solve this problem from external program, so I can use only remote enabled RFCs/BAPIs.
The problem is this. I want to be able to simulate Sales Order from Credit Checking point of view.
I don't want to save order but want to know if credit check would pass if I saved the order.
I am able to get error "Credit limit exceeded" in the GUI with all correct settings, but when I call BAPI_SALESORDER_CREATEFROMDAT2 it does not give any error
for the credit limit.
I have not even tried simulate because the BAPISALESORDER_CREATEFROMDAT2 itself does not fail.
Any settings or parameters to be supplied for causing credit limit checking thru BAPI ?
Thanks in advance...
Maybe you are looking for
-
Ni-MAX no longer recognizes NI-5133 or any device if windows goes to sleep
I am running Labview 8.6 and MAX 4.6. There are three devices on the system, all using drivers from NI. They are an Agilent 33220A function generator, NI-5102 scope/digitizer and a NI-5133 scope/digitizer. The NI-5102 is PCMCIA and th NI-5133 is u
-
Connecting cam to PC w/Win 8.1
I can't connect, via USB, my silver PowerShot A2500 cam to my PC, Win 8.1 during "set-up". The computer simply doen't "recognize" the device, even after downloaded software from Canon is initiated.
-
Final cut to Quicktime file is too large?
Hello, I've got a project in final cut pro that is about 2.3G. I'm trying to convert it to Quicktime for burning, but it's telling me that the file is now 8.1G...... I'm not sure why this is happening. Can anyone please let me know if this has happen
-
Hi guys, I just briefly read BEA's XMLBeans overview and it seems very similar (if not identical) to Sun's JAXB specification. Are they one and the same? Also, I am currently using the open source software from Castor (www.castor.org) for xml-java &
-
I just sold my 2008 white MacBook to my friend and they say that all they did was use the internet a few times and then the next time they tried to start the computer it pops up with the Apple logo, Error sign (circle with line through it), and the f