Extend license for evaluation versions of server 2008 rs and sql 2008 rs

We had to stop our testing because of seasonal business requirements and now have only 11 days before the expiration of our trial versions of SQL Server 2008 R2 and Windows Server 2008 R2. How do we extend the license for 60 days to complete our testing
and start the move to a new production system?

Hi,
Please refer to following article and check if can help you.
Extending
Your Activation Grace Period on Windows Server 2008 and 2008 R2
However, as GreenlightTech suggested, purchasing licenses and activating will be a better option before activation
Grace Period
expired.
If anything I misunderstand or any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

  • BPC 7.5 SP4 Support for Windows 2008 R2 and SQL 2008 R2

    The release notes for BPC 7.5M SP04 state that support has been added for both Windows 2008 R2 and SQL 2008 R2.
    For SQL 2008 R2, there is nothing in the feature pack described as "SQL 2005 Backward Compatibility Components" - which was a required piece for  BPC 7/7.5 on SQL 2008. Is the SQL 2008 version still a requirement, or does BPC 7.5 now not need the Backward Compatibility components?
    Also, the ReprotViewer executable that is packaged with BPC 7.5 is the one for SQL 2008- will that work when installing SQL 2008 R2?
    thanks,
    Tony DeStefanis
    Column5 Consulting

    Hi,
    we have the same environment (BPC 7.5 SP4 on Windows 2008 R2 64 bit and SQL Server 2008 R2 64bit).
    we are developping our application-set and for the moment we have no problem.
    regards
    massimo

  • XL Reporter in Sap 8.8 PL 16running On Server 2008 R2  and SQL 2008 R2

    Within the above environment (XL Reporter in Sap 8.8  PL 16 running On Server 2008 R2  and SQL 2008 R2)
    Xl reporter is loading and appears to work fine until you look at the spreadsheet result
    It is completely blank except for the titles
    Yet Excel Macros and the attachment paths are defined correctly
    As can be seen when we export any report to Excel successfully
    I've had another consultant look at my setup carefully just to be sure
    He can't figure out why
    Anyone with similar results
    I would appreciate any comments
    Georges Ostiguy

    Even something as simple as a list of BP 's and phone number gives a blank report
    When my friend who knows xl reporter much more than I do tried, he managed to get the
    BP numbers but nothing further
    I then brought him to another server with the same configuration , same result
    He then tried it on one of his own servers with similar config = same result
    Server 2008 Standard R2 64bit
    MSSQL 2008 R2
    SAP 8.8 PL 16
    Sample demo database
    I don't get it

  • SAP R3 4.5b running on Windows 2008 R2 and SQL 2008 R2

    Hi
    Trying to obtain information on compatability of SAP R3 4.5b running on Windows 2008 R2 and SQL 2008 R2 ?
    I understand that SAP may not support this? But would it actually work? Assuming we have a third party supporting it?
    Jay

    Hi Jay,
    You may check the support in PAM http://service.sap.com/pam.
    Ideally SAP shall not support this environment.
    Reason being:
    1) SAP kernel for R3 4.5b not available for windows 2008 R2
    2) Compatible database library not available for R3 4.5b on MSSQL 2008 R2.
    with above 2 reason you shall not be able to install R3 4.5b on Windows 2008R2 with MSSQL 2008 R2 database.
    Regards,
    Deepak Kori

  • Unlimted License Patch fails for multiple versions of  Server Express

    I'm following the directions for installing and licensing two versions of Microfocus Server Express for a PeopleTools 8.52 upgrade. When I get to the point where I apply the Unlimited License Patch (ULP), the application to the first version goes fine, showing a successful "installed" message. After installing the other version of Server Express, I try to apply the ULP again and this time it returns an "uninstalled" message. Eventhough I had COBDIR set to the 2nd installation, the ULP deinstalled the patch for the first installation. I'm doing this as the root user but I have su'ed to root. This worked fine 2 years ago. What am I missing in the environment that prohibits me from installing the ULP for multiple versions of Server Express?

    LD_LIBRARY_PATH

  • Do we need License for Lync 2013 Edge server?

    Hello Team,
    We are currently running Lync 2013 Standard Edition Server. We are planning to enable users for External access and planning to deploly Lync 2013 edge server.
    1. Do we need License for Lync 2013 Edge server?
    2. Any other client licenses needed?
    Please advise.

    Hi,
    No you don't required any additional License in order to install Lync Edge server. the only license required at OS level i mean windows server licence in terms of Lync concern you don't require any additional License   
    check this 
    https://products.office.com/en-us/lync/microsoft-lync-licensing-overview-lync-for-multiple-users
    http://lyncuc.blogspot.in/2013/02/lync-2013-licensing-guide-how-to.html
    And for client also you don't require any additional license with your existing client license will work for externally as well
    Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

  • Licenses for education version of photoshop

    Hello.
    I do not anderstand how and how many licenses I can buy for my college...what is the price for 25 students and one teacher for exemple?
    sinderely
    Y.P

    Thank you..but I do not have regional reseller....And I do not know 
    how and where I can find one .
    I just need some help to anderstand where I can buy some licenses for 
    my college and the price.....there is nothing about on your sites...
    Le 23 sept. 12 à 11:52, Mylenium a écrit :
    Re: licenses for education version of photoshop
    created by Mylenium in Photoshop General Discussion - View the full 
    discussion
    Perhaps this may help:
    >
    Education FAQ
    >
    In any case, you need to contact your regional reseller/ Adobe 
    subsidiary for this kind of stuff.
    >
    Mylenium
    Please note that the Adobe Forums do not accept email attachments. 
    If you want to embed a screen image in your message please visit the 
    thread in the forum to embed the image at http://forums.adobe.com/message/4720140#4720140
    Replies to this message go to everyone subscribed to this thread, 
    not directly to the person who posted the message. To post a reply, 
    either reply to this email or visit the message page: [http://forums.adobe.com/message/4720140#4720140
    To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/4720140#4720140
    ]. In the Actions box on the right, click the Stop Email 
    Notifications link.
    Start a new discussion in Photoshop General Discussion by email or 
    at Adobe Community
    For more information about maintaining your forum email 
    notifications please go to http://forums.adobe.com/message/2936746#2936746

  • Windows 2003 server and SQL 2008

    Hi
    Does SAP Business one support windows 2008 and sql 2008 platforms?
    When i checked the partner portal it says that these platforms are not supported.Is there any update?
    Regards
    Louis

    Hello Louis,
    The only way to determine this is via the supported platforms page in the portal. This is the most up to date, and will include information for the future when this data is available. So for not I would only plan with what information is available.
    Regards,
    Paul Finneran
    SAP Business One Forums Team

  • SQL 2008 SP1 to SQL 2008 R2 Upgrade

    I have a SQL server running SQL 2008 SP1 and am trying to upgrade to SQL 2008 R2.  The server has an installation of SCOM 2007 R2 with CU4 on it with reporting services and SCOM data warehouse
    The SQL upgrade advisor runs and tells me that Custom report items were detected on the report server and 3x Custom extensions or assemblies were detected on the report server
    If I actually try to run the upgrade I get a 2 failures in the Upgrade Rules check:
    No Custom Security Extensions and No Custom Authentication Extensions
    I can see that the file rsreportserver.config has the custom entries relating to the scom data warehouse user so it is possible to change this file back to the original config file that was present before installing scom data warehouse and then run the sql
    upgrade and then put the config file back?

    Hi Mickpell,
    Me too facing the same issue while upgrading from SQL 2008 SP1 to SQL 2008 R2. Getting below error:
    No Custom Security Extensions and No Custom Authentication Extensions
    Did u follow the steps you mentioned and it is Success???. Could you please confirm. If it was success, I can proceed with the same steps. Thanks in advance!!! I am
    using SCOM 2007 R2 CU5. Should I download latest Hotfix Utility or CU2 utility is enough???
    Regards, Suresh

  • EVGET in BPC 7 MS and SQL 2008

    Have there been any change in how evget works in BPC 7 MS with SQL 2008 compared with BPC 5,1 and SQL 2005?
    When I use EVGET in BPC 5.1 and SQL 2005 I always get RFN# when the cell with EVGET isn't updated.
    But now when I'm trying BPC 7 and SQL 2008 I get i zero (0) when cell isn't updated. And some times I get another value that isn't the right value for that specific EVGET formula, seems like the system has an old value in memory thats shows, but when I update the, right value shows up in the cell.
    This can be a bit confusing and even worse, in some of our reports the wrong value isn't updated when report is refreshed.
    Anyone with the same problem or anyone who know if there are any changes made how the data is refreshed in EVGET formulas

    Did anoyone resolve this issue? - we are facing the same

  • Java for PI 7.1 EHP1 in Windows and SQL Server 2008

    Hi Gurus
    I try to install PI 7.1 EHP1 in Windows and SQL Server 2008. The questions is :
    What version of java is the correct for this installation???
    And where i can download it??
    Thanks and advance!!!

    Hi Aaron,
    The version for PI 7.1 is 1.5, instead of the 1.4.2 of 7.0/3.0.
    Anyway, for VM settings, you should refer to SAP JVM, which
    is used for the PI 7.11.
    Hope it helps!
    Regards,
    Caio Cagnani

  • Error message opening PS CS3 Extended : "Licensing for this product has stopped working"

    I used Migration Assistant to transfer data from my (very) old Mac OS X to a new iMac OS X Yosemite. Before doing so, I uninstalled my (also very old) PS CS3 Extended. When I tried to open PS on the new Mac it asked me to download Java, which I did. But now when trying to open PS again the error message is "Licensing for this product has stopped working". I purchased it about 5 years ago in a box which I no longer have, but I do have the complete 24 digit serial number. How best do I remedy this?

    Download the Photoshop CS3 installer Max or PC here. You should be good to go.
    Download CS3 products

  • Acrobat 9 & X License for older versions

    I have several employees here, some using Acrobat 9 Professional, others using Acrobat X professional, both of whom are experiencing the same issue: toolbar buttons are disappearing, and Acrobat is crashing shortly afterwards.  This is a known issue, and has been acknowledged in the Product Support forums, but (from what I can tell) Engineering is not expected to have the problem fixed until the next patch release, happening sometime in May/June.
    However, this doesn't really help me, as these people are experiencing crashes as frequently as every 5-10 minutes, and "...when you see the buttons start to disappear, immediately save your work and restart Acrobat" is a huge disruption to their work process.
    My question is:  is it possible (and permissible) to use these licenses for versions 9 and X to install Acrobat 8 Pro?  There are other employees here using this version, and working on the same files, that have not reported any problems related to this issue.  I was unable to find any information on this from looking through the EULA and forums.

    Hi Sheldon, serial numbers for one version won't work for another, so that's something that probably only Adobe itself could help you with (try contacting Customer Service).
    They may or may not be able to help - but if you think you'd only need 30 days using an older version, one option would be to install the free trial for Acrobat 8.  You could ask if they still have that to offer.

  • Cannot download device name license for mac version

    I'm having problem when i try to deploy a installer for Mac version.I download CCPLauncher for Mac.When i launch it i only can select Serial Number License & Named License its different from Windows version which is i can download Device Named License.Can ur team help me ASAP because i have to deploy to 24 sites around Malaysia by next week.And for your information I'm buy a education licensing.

    Packager Links https://forums.adobe.com/thread/1586021
    http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  • Unable to install a license for NSC version 1.1.1.24

    I installed the new ncs version (1.1.1.24-small), with success. Later I will use a  temporary license for testing.
    I use the licing center and get a license but I get allways following message : "UDI of file not match the system"
    Following parameters : Product ID : PRIME-NCS-VAPL Serial : NCS-NXO:9FBA93C0-BED2-11E1-9289-005056915852
    If I type on Console show usi I get following output : SPID: Cisco-VM-SPID, VPID : V01, Serial D31CEGK4RH6 
    I try ít repeatedly allways the same output.
    Ulrich

    Ulrich:
    Text format of the license seem to show correct UDI:
    HOSTID=HOSTNAME=PRIME-NCS-VAPL:NCS-NXO:9FBA93C0-BED2-11E1-9289-005056915852
    I'll try to compare with another similar format license (different product though) and get back to you.
    Amjad

Maybe you are looking for

  • CL_SQL_RESULT_SET=============CP

    Hi All, We are facing a typical issue, We have our BI production system Live from past 2 years, in which Suddenly the system performance goes down i.e BI query will take more time than it will take usually to execute the report. When the system perfo

  • Document preview

    Hello, Is it possible to retrieve a preview of a document (I mean the first page as while a document is on the desktop) using the SDK. What I'm looking for is a quick method to avoid the full opening of the document. Thanks in advance, Joe

  • Question about choosing an external dvd/cd burner

    The burning speed listed in my iTunes preferences goes up to 24x, then "Maximum Pssible". I am thinking of purchasing a LaCie DVD/CD burner that has write(48x)/rewrite(32x)/read(40x). When using with my iMac does this mean that I can burn at 48x with

  • Convert table definition to DTD

    does anybody know an easy way to create a DTD of an existing ORACLE database? Can I use "transx"? Thanks, Luis

  • Cannot export one room mailbox but others yes.

    Gonna try to be more specific here... I deleted a user (meetingroom) with an associated mailbox and then restored the user through ADRestore, reconnected the Mailbox but the calendar settings (among other settings) in ECM 2010 give me an error: "Mail