Extend my wireless network w/airport express w/out connecting via ethernet?

Here's what I have:
I have an Airport Extreme Base Station Version 7.5.2 - named Jim's Base
I have an existing Airport Express that I use to stream music to my office stereo - named Jim's Office
I have a new Airport Express that I would like to use to extend my wireless network to my family room - named Jim's Extended. I have ethernet to my family room for my TV and Receiver and an ethernet switch with one available port.
Question, when extending my existing wireless network do I have to extend it using an ethernet cable or can it be extended "wirelessly" i.e. no connections except to 120v power?
Could someone share the exact instructions? I've been trying to configure this "extension" for several hours now but can't seem to get it to work - wired or wireless.
Thanks -
jP

Apple's instructions to "extend a wireless network" using wireless only are in the link below. Although the illustration pictures a 2nd AirPort Extreme, the setup for an AirPort Express is exactly the same.
http://support.apple.com/kb/HT4259
The Ethernet port is automatically enabled in this type of configuration to allow Ethernet devices to connect. If you need more than one Ethernet connection, you can add an Ethernet switch to the AirPort Express to create more connection capabilities.

Similar Messages

Extending Sky Wireless Network with Airport Express.

I spent most of last night trying to extend my Sky Wireless Network using an Apple Airport Express. The Apple Store salesman told me that it would be simple to set up but he's either wrong or I'm completely stupid!
Does anybody know if this is possible and if so, can they please advise me how I do this. (I am using Windows 7 on my Dell laptop)

I spent most of last night trying to extend my Sky Wireless Network using an Apple Airport Express. The Apple Store salesman told me that it would be simple to set up but he's either wrong or I'm completely stupid!
Unfortunately, the salesman may not have understood your question, or he may have given you incorrect information.
It's possible to have the AirPort Express provide more wireless coverage if you connect it using an ethernet cable permanently to your Sky router.
But, the AirPort Express cannot "extend" the wireless network produced by the Sky by connecting using wireless only. The "extend" feature will only work if you have an Apple to Apple wireless connection. This feature is not compatible with the products of other manufacturers.

I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network. I select Extend Wireless network but have no success. Ideas?

I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal. The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available. I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play. I got the plug, but no play. I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status. I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times. Then wait 45 seconds and the default settings will return. I did all that, only to find out that after the initial flash of green, green never appeared again. I got a fast flashing yellow light, followed by the light going off. Apparently this didn't reset it properly. So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
highFly376

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

How can I extend my wireless network using Airport Express and an Airport Extreme on BT Infinity?

I have BT Infinity and I am using the Time Capsule with Airport Extreme as my router. Working well (even on wireless). I want to extend the wireless network with an Airport Express, but I cannot work out the settings necessary in Airport Utility. I am using Mountain Lion 10.8.2 on a Mac Pro. Please help!

BT,
I've read several of your posts, thanks for taking the time to share your wealth of knowledge.
I'm in a situation similar to the one described by 'scoutusmaximus'. Seeking the flexibility of a standalone router, I finally upgraded my 4-yr old ATT DSL gateway (modem+router) to a Comcast standalone modem + the ASUS RT-AC66U: http://www.asus.com/Networks/Wireless_Routers/RTAC66U/
Typically, I stick with all things Apple but the ASUS router seemed fairly superior to the current-gen base station (on paper, anyway; time will tell when it comes to performance) so, for once, I jumped ship. My plan was to extend the ASUS wired/wireless network using my TimeCapsule and 2 Airport Expresses in bridge mode, however, a google search turned up several unhappy customers that claim those devices don't play well with non-Apple routers, especially when it comes to 'extending' a network.
Questions:
1. Can I successfully extend the wired/wireless network created by the ASUS router using the 3 airport devices listed above w/out negatively impacting performance? I'd rather have 1 wireless network as opposed to creating a new wireless network with the TC and then extending it with the AP Expresses... though I'd consider that option down the line if it came to that.
2. Will the LAN ports on the TimeCapsule remain functional?
Btw, my house is wired so, I can reach all 3 devices via ethernet cable coming off of a central, managed switch. Supposedly, you only lose the LAN ports on the TC if you extend wirelessly.
Any advice would be appreciated.

Extend existing wireless network with airport express..impossible?

I have tried to extend my existing wireless network with an airport express, but it seemd that I always need a ethernetcable...apple support insured me it is possible but the airport utility software only allows me to extend using a cable it seems....

Couple of thoughts here.......
The AirPort Express will only extend a wireless network if you have another Apple router providing the wireless network to be extended.
Is your "main" wireless router an Apple product? If yes, what model number do you have?
It would also help if we could get the model number of the AirPort Express. Some older versions are not capable of extending a wireless network.

Will extending a wireless network using airport express cause weaker signal?

Hoping someone can advise on the following please....
I have installed an Airport Express to extend my wireless network and have confirmed with Apple tech support that it's connected and configured properly. I'm using an Airport Extreme base station as a wireless router.
The AX does not seem to be extending the signal range at all, and since the setup the signal strenght from the Extreme base station seems to be at half previous strengh.
Has anyone experienced this please and, if so, what's the fix?
Any replies gratefully received.
Regards

Let's check the settings on your Express. Temporarily, move it to the same room or an adjacent room to the Extreme and power it back up.
Open AirPort Utility - select the Express - Click Manual Setup
Click the Wireless tab below the icons and make sure that your settings look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Extreme wireless network
Check mark entered next to Allow wireless clients
Wireless Security = Same setting as the Extreme network
Wireless Password = Same password as the Extreme network
Confirm Password
Update to save settings, wait for green light.
Then move the Express another room or two further away from the Extreme....and restart both the Extreme and the Express. Then perform the BSSID test again.

Setup for extending Sky wireless network using Airport Express or Time Cap

Hi,
Hi,
I have three Mac computers/laptops (iMac, MacBook Air and G4 PowerBook), all currently functioning via airport on a sky wireless network (Sky HD Sagem router) all backing up wirelessly to a Time Capsule 1TB which is also connected to the same wireless Sky network. At the top of my house signal strength is weak as you would expect. I would like to be able to extend the range of the sky routers signal which is on the ground floor (3 storey house). My original idea had been to setup a AirPort Express on the 2nd floor to extend the network, but I am unsure what steps I have to follow and whether I need to create a WDS network or not? I've seen some comments that say Sky & Apple hardware are not compatible and it's not possible to extend a Sky router/wireless network using a Apple Airport Express or Time Capsule. Can someone provide me with a step by step set of instructions on what I need to do to set this up? If a work around is required, again any advice would be very much appreciated!
Many thanks,
Eugene

Welcome to the discussions!
Sky and Apple products are not compatible for the purpose of extending your network using wireless only.
If you could connect an ethernet cable from your Sky router to the AirPort Express, or if it's not possible to run an ethernet cable...take a look at a pair of ethernet powerline adapters to accomplish the same task by using the AC wiring in your home to transmit the ethernet signal.
If you configure the AirPort Express to "create a wireless network", this would in effect, extend your network by adding an AirPort Express that would be configured with the exactly the same wireless network name, security settings and password as your Sky router. The AirPort Express would also need to be configured as a "bridge".
Post back if you need more details about something like this.

Extending Snow wireless network with AirPort Express

I am trying to extend my existing Snow network with an AirPort Express, which I will connect to the Snow (through an unmanaged ethernet switch) via an ethernet cable. I think I know how to do this but if anyone has any hints, they would be appreciated.
In addition to using the AE as an "extender/wireless access point," can I also configure the system to stream AirTunes to the AE through the ethernet cable at the same time?
Thanks

Oops, sorry I misread your post. That should work. Make sure that you disable the "Distribute IP addresses" option on the AX so that it acts like a wireless access point. On the AX, just enable the "Enable AirTunes over the Ethernet port" option on the Music tab.

Extend wireless network with AirPort Express

How to extend the wireless network with AirPort Express and Belkin PlayMax as the primary router ?

How it work if I have an AirPor Station and 4 Airport Express, I actually also have an old TimeCapsule and an old AirPort Express. Can I cover all my house (around 300 m2). And will the old Airport slow down or convict with the new ones?

How do I extend an existing wireless network using airport express?

Hi all,
I am trying to extend existing wireless network using airport express, my main router is Belkin

Unfortunately, Apple's "extend" feature is designed to only work with other Apple routers if you are trying to "extend" using wireless only.
It is extremely unlikely that this feature would work with a router from another manufacturer using wireless only.

Itunes, wireless networking and Airport Express

Hi,
I currently have an AEBS and I am considering getting an Express to extend my network and stream iTunes to my stereo. My network is wireless for my Laptop and hardwired into my two desktops.
I know that I can set up Airtunes, but sitting near my stereo is a small hub (thats connected to my AEBS) that feeds media to my Xbox media centre. Can I connect my Airport Express to this hub via ethernet to receive iTunes then using the speaker cables feed music to my stereo or will it only work wirelessly in Airtunes mode?
Also, can you extend the wirless network with your Express by having it wired into this hub then re transmitting the wireless signal or will wireless netwrk extending only work completely wirelessly?
Thanks

Hi Martin,
what a co-incidence - i just bought an IMAC and also have the thought of archiving all my CD's (about 1000) on some kind of harddisc-server, and then be able to access this archive via my Imac (wirelessly), and stream the music to my Hifi system and feed it into my Digital/Analog Converter. Do you think the time capsule wld be ideal for the function of storing/archiving and streaming to the hifi system..? I guess I also need a seperate "Airport Express", as it has an optical- digital output into my Digital/Analog converter...
Thanks for your thoughts and kind regards from Singapore !
Thomas

HT1515 do you need to connect the airport express to a router via ethernet or can it do it using wireless?

do you need to connect the airport express to a router via ethernet or can it do it using wireless?

There are 3 Apple routers....AirPort Express, AirPort Extreme and Time Capsule. Details here:
http://www.apple.com/compare-wifi-models/
Do you have one of these products in the living room?
If no, you can only use the AirPort Express by connecting to the router in the living room using an Ethernet cable at all times.

Extending Gen 1 Time Capsule Wireless network with Airport Express N

I am having difficulty setting up my new Airport Express w/ 802.11N (SKU# MB321LL/A) to extend the wireless network from my Time Capsule (SKU# MB276LL/A).
My setup is as follows:
Time Capsule is connected to Cable modem with the following wireless settings:
Wireless mode -> Create a Wireless Network
Allow this network to be extended -> Checked
Radio Mode ->802.11n (5Ghz N only)
Wireless Security -> WPA2 Personal
The issue is the when I attempt to setup the AE to extend the network. I match the settings to the Time Capsule:
Wireless Mode -> Extend a Network
Select the Time Capsule Network
Allow wireless clients -> Checked
Wireless Security -> WPA2 Personal
However after I reset the AE the LED glows Amber and the following problem is reported:
+Wireless Network+
+This AirPort wireless device is set up to join a specific wireless network that can't be found. If you don't see the network that you want to join in the Network Name Pop-up menu, enter the network name and network password if necessary to try again.+
When I check the Airport->Wireless tab the settings were as before.
Any thoughts on this? Thanks.

Welcome to the discussions!
Have you tried to position the AirPort Express close, say 10-15 feet, as a test to see if it will connect that way?
If so, then move it back another 10-15 feet, etc.
5 GHz signals do not travel well or penetrate surfaces very well, so my first thought was that the signal was not strong enough for the Express to pick it up where you had it located.
Message was edited by: Bob Timmons

Extend a non Airport wireless network with Airport Express

I want to use an Airport Express to extend a wireless network which is not an Airport network. The wireless is being provided by a wireless router. I tried setting up WDS, but that requires a wireless network. How do I extend the wireless network without it being an Airport Base Station? Can I?
Thanks.

I'm trying to extend an 802.11g network. The base access point is a SpeedTouch which supports WDS. My Airport Express happily connects to the network as a regular node, but I can't get the WDS to work. Do you know of a way to set this up?
Thanks!
JP

Extending my Linksys Wireless Network with AirPort Express

I would like to add an Airport Express to my wireless network to extend my wifi range and add AirPlay to my home theater system. Can Airport Express be used to extend my current wireless system that is not an Airport Extreme devise?
Also, by adding the Airport Express does this now limit the number of devices I can have on my wireless network to the 10 even if the Linksys supports 50?
Thanks for any advise...

Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your non-AirPort router can be extended wirelessly with the AirPort Express Base Station (AX).
The few that are known to work are:
another Airport Express Base Station
802.11g Airport Extreme Base Station (AEBS)
802.11n AirPort Extreme Base Station (AEBSn)
Linksys WRT54G or WRT54GS (not v5)
Belkin F5D7230-4 and F5D7231
BT Voyager 2091
Netgear WGR614 v6
Buffalo WGR-G54

Extend my wireless network w/airport express w/out connecting via ethernet?

Similar Messages

Maybe you are looking for