Extend network and stream music together??

I have an AEBS N2 and a new AX. The AX is setup to extend the network. I want to also use it to stream music. Is it possible with this setup (Vs Join the network)??

Great news, thanks. It seems my network is working well now and with firmware 7.4.1!!!

Similar Messages

AEX for both extending network and streaming music?

I have a Time capsule purchased in late 2008 and a recent Airport express. Can I use the AEX to both extend my network and stream music at the same time? I set it up to extend my network and everything works find so far.
Thanks

Yes, just make sure AirTunes is enabled in AirPort Utility for the Express.
Airport Utility - Manual Setup - Music icon

Airport Express to extend network and stream music at the same time?

Hi. I have an Airport Extreme base station (primary wireless access point) and an Airport Express. Currently I connect my Hi-Fi to the Airport Express and stream music from iTunes, but I would like to also make use of its Ethernet port to connect other wired devices to my network. Is this possible; can it be used for both simultaneously? I've tried various configurations but not managed to achieve this.

Welcome to the discussions!
If you have an AirPort Extreme(n) and AirPort Express(n), the ethernet port for the Express will be active if you "Enable ethernet client" during setup using AirPort Utility.
It sounds like you have either the "g" version of the Extreme or Express or both. Both devices must be "n" capable to use this option. If you don't see an option on the Wireless setup page of the Express to "Enable ethernet client", you have a "g" Express and this function is not available with your device.

Airport issues and streaming music

Hi all, after quite a bit of frustration with my AX, which I might add, worked well for years, I installed a NetGear wireless modem and am very happy with it.
One issue is that previously, when the AX connected with ethernet cable to my router, I was streaming music around the house, something I really enjoyed. This AX has now been removed.
I assumed that it was possible to connect the second AX to my new wireless network. (created with the new NetGear)
Not so, Airport utility still recognised the second unit and I proceeded to complete the process. But the AX would not re-start. Now, admittedly I only tried it once, but is it possible to still connect the second AX to my wireless network, and stream music, via AirTunes?
Appreciate any comments....am I trying to do the impossible?

Ronald,
Have you reset the Airport Express?
Then try and join your new network.... which is now the NetGear...
I am running 3 Airport Express units to 3 different stereos and they all work fine. Even though I have a different Main Base station than you have, you should be able to "Join" your network.

Can I use airport express to extend my network AND stream iTunes???

I have an airport extreme connected to the cable modem and sending a signal out to my home network. I also have a powerbook and an airport express connected to the home stereo.
My question is, can i use the express to extend my extreme signal (to reach the back yard) and stream music from itunes at the same time? The set up utility seems to suggest that you do one or the other.
Thanks!

Are you sure you configured the Express to extend the Extreme's network? If you use the standard setup, the two base stations will be indistinguishable, i.e. you'll only see one entry for the wireless network.
If you were connected to the Extreme when you configured the Express, try turning off Airport in the Airport menu and then turning it back on. The computer should pick up the stronger signal at that point.

How do i extend airplay to stream music at the same time to AEX and ATV2

I have a new ATV2 and an AEX, my macbook, 2 Ipod touches and an Ipad2.
I figured out how to setup my ATV2 and airplay through my macbook and my touches. My ATV2 is in my living room on a Yamaha 6.1 receiver with 2 channels. I have 6 speakers in my living room on channel A and a speaker in my bathroom on channel B.
So....I decided to grab an extra Bose speaker and bring it to my foyer/kitchen and hook it up to my AEX since i cant hear the music too well when im cooking or in my office from the speakers in the living room.
I setup the AEX to connect direct to the speaker. When Im on Itunes (either mac book or touch) i only get two options to airplay, AEX or ATV2.
My question: How do I extend airplay to stream music on BOTH AEX and ATV2 with the same music at the same time?
Please and thank you!

As you are already aware both the 802.11n AirPort Express Base Station (AXn) and ATV2 are AirPlay "speakers." When both devices are properly connected to your home's wireless or wired network, both should show up in iTunes as in your case. Also the iTunes AirPlay speaker selector should provide you with an option to choose multiple speakers. As a minimum, you should see: Computer, the AXn, the ATV2, and the Multiple Speakers options. Is this not the case?

I have a brand new mini mac and a new apple TV. Both have been updated and can see my movies in itunes. I can use Netflix and stream music. I have tried to use my old laptop and it streams video fine. But my new computer only see a spinning circle.

I have a brand new mini mac and a new apple TV. Both have been updated and can see my movies in itunes. I can use Netflix and stream music. I have tried to use my old laptop and it streams video fine. But my new computer only see a spinning circle.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

Extend Network and AirTunes

Hi,
Can you extend your current AirPort network and still stream your music with AirTunes.

coolchris540-
Greetings and welcome to the Apple boards.
Do you mean extend the physical distance that it will cover and stream from one end to the other?
Luck-
-DaddyPaycheck

AE setup for wireless router and streaming music

I'm attempting to setup my AE base station as a wireless router and use it to stream itunes through a home stereo. I'm using a new Dell Inspriron w/internal wireless card. It is detecting other wireless networks but not seeing the AE base station (which is flashing yellow even after resetting). Any input as to what I am missing?

Hi.
I am accessing internet thru a wireless router, and it works great. Plugin AE (setup to run on the same network) and the internet gets so slow it ceases to function though I still have a valid IP. When AE is plugged in though, iTunes recognizes the speakers connected, but when I try to select them, it says 'connecting' and the program stops responding. Oh yeah, it's iTunes 5.
I've used my AE in hotels and shops where I've plugged it into an ethernet cable and the internet has worked automatically. I take it home and it stops. Try to play some music over it and it doesn't work either. What gives.
Anybody have any ideas? I'd love some help.
thanks.

E3200 and streaming music

I currently upgraded to E3200 wireless router from my previous WRT610. I use itunes/apple airport express to play music located on a Buffalo NAS (LAN connection to E3200) on my home stereo. Before upgrading I was able to do this without a problem. Any suggestions for improving performance with streaming music at home? Internet/access to files on Buffalo NAS wirelessly works fine.
Thanks.

If you have a problem with the streaming of music wirelessly then try these troubleshooting steps:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
          1] Open the software and go to the option which says "Router Settings"
          2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
         3] Then go to the Wireless tab, keep network mode as mixed,
For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

AirPort Express - extend network and/or AirTunes - one or both ?

I would like use my second AE to extend my existing AE network AND wire it to my stereo to use the AirTunes feature. No trouble setting it up for AirTunes but can't seen to get it to extend the network. Any tips about how I can get both features to perform as advertised?

If you need more wireless coverage, you can use the WDS configuration method for a "mix" of older "b/g" and newer "n" devices.
The big downsides here are that WDS operates only at "g" wireless, so you lose any faster "n" capability on the network...and...the bandwidth of the entire network will be cut in half. So, in effect you will have a bit more wireless coverage, but it will be a "g" wireless network running at half speed.
I don't recommend this, but if you want to try, post back for more details.

Samsung Blu-Ray player, Airport Extreme network, and streaming Netflix

I am very frustrated. Can you help? My husband just purchased a Samsung Blu-Ray BD-P3600 player and TV. I have read all of the forums on trying to connect this to an Airport Extreme network. After several days of trying different options, I still can not get the Blu-Ray player to connect to my network and be able to stream Netflix. The only way that I have gotten close is through the wireless connection devise and putting in the IP address etc. When doing a network test, if checks the MAC Address and the IP Address, Subnet Mask, Gateway, DNS Server. It then pauses for a long time and tells me that the Gateway Ping won't work. It says, "Your network cannot operate properly." I have not had any trouble connecting any computers or printers to the network. Why can I not get this to work? Please tell me what I am doing wrong. I know just enough to be dangerous. Thank you!

Hi - I found this on CNET but not a techie so not sure if this will work - I have Airport Extreme & just bought 2 Samsung Blu-Ray BD-P3600 players to use w/NetFlix and have called Samsung tech support 3 times w/no luck - the last time the technician said that Apple/Samsung WIFI not compatible - I have a 13 character pswd so that my roommate who has a PC can connect - we don't have any problems with any other connections to Airport Extreme -
Post today from CNET discussion on same topic:
by tommyw66 - 1/6/10 4:54 PM In reply to: Samsung blu ray and Apple Airport Extreme/Express by jonmck8
found this about setting up a psp with airport should help:
"Apple does not mandate that your WEP password is the correct length. In the real world of WEP (non Apple devices) they actually require that your WEP key is a specified length dependent on the bit level of encryption. If you are using HEX or ASCII encoding these passwords can get as high as 26 to 40 characters long. Yea, thats a long pass code! Your Mac sitting in your house doesn't care about all that mumbo jumbo. You can put any old password in the AirPort Admin utility and it will take it.
I learned over at Gaming-Age that I could get away with a 13 character WEP Key. You should, however, stick with 128 bit WEP as this is better protection, and works well with the PSP (I run my AirPort Express in 802.11b/g Compatible Mode). Once you set your WEP key and update your AirPort you can setup your PSP. Now just setup your PSP for Wi-Fi Infrastructure mode"
and this:
The trick is that to use the hexadecimal key with an Apple AirPort Card, you must enter a dollar-sign before the hex number, like
$1E2B3C4FAA

Extend network AND connect via ethernet?

How do I configure Airport Express to extend my network wirelessly and connect a computer via Ethernet?
I have 2 buildings at my church I am in charge of getting this to work in. The office building has a wireless network, the sanctuary has no ethernet or wireless at all. I can get a good signal to an Airport Express I just purchased inside the sanctuary and I am using that to feed internet to the PowerMac G4 that doesnt seem to see the network from the Office area. I was told that this could also extend my wireless network to the other computers in the sanctuary. I have not been able to get this to happen.
I succesfully have it in "Join a Network" mode and it grabs the signal and gets internet to the G4. As soon as I change the mode to "Extend my network", I lose all connectivity with the network. In addition, no matter what mode I am in, I can't see this Airport from any devices wirelessly either in the utility or in the Airport browser.
So...how do I allow other machines/tablets/etc to use this airport to hook in to our network AND use the Ethernet line to feed the G4?
Thanks,
Joey

I am going from an Airport Extreme 4th gen (dual band) to an Airport Express 2nd gen (just replaced thanks to the Genius Bar, it used to be a 1st gen. single band) and then picking it up with another Express 2nd gen.
That.....is the problem.
I had understood from your initial post that you had an AirPort Extreme and wanted to extend to several AirPort Express devices.
Apple's "extend" setup works like the hub and spokes of a wheel. The AirPort Extreme would be the "hub" and the AirPort Expresses would reside at the end of the "spokes".
You can have multiple AirPort Express devices located at the ends of the spokes, but in order to "extend", each one of the them must connect directly to the "hub".....not to another extending device at the end of another spoke.
What you are trying to set up is a "hub", "relay" and "remote". Unfortunately, Apple's "extend" setup does not work this way.
The distant remote can pick up a signal from an Express at the end of a spoke acting as an extender, but the distant remote cannot "extend" the signal from an Express at the end of a spoke using wireless.
The distant remote is actually joining the network....that is why the Ethernet port is active....but unfortunately, there will be no wireless signal from this device.
Somewhere, an Express will need to connect back to the Extreme using a wired Ethernet connection. Then that Express can "extend" to another Express using wireless.

Cant use apps and stream music using airplay to apple tv: ipad

Hello all, was trying to stream music from my ipad to my apple tv to my stereo using airplay, and while doing that i wanted to play a game,who would have thunk it right, But as soon as i launch a game it kills the audio for my music and im stuck with the normally bad music of the games i own. They didnt design it so my ipad is now crippled untill i am done streaming music, did they? Is there any way around it, or am i missing something?
Question is, can i stream music from my ipad to my apple tv using airplay AND play games on my ipad. I see i can use the web browser with no issues. But games and other Pps kill my music stream. Please help and thanks.

well actually they arent. after pluging away at the problem for a while, i solved the issue. all i needed to do was mute the music in the app, and airplay is never affected. the issue only happens when launching an app with music. as long as i can mute the music in the app, airplay works perfectly. it workks so well that i can still hear the sfx from the game or app in the back ground of my music. which is perfect, just like a game i would play normally, plus i get the added suround sound to my bite sized game.
sorry but if there was a not helpful button, you would get it. before responding, look into it first. you responded as if you knew, which it is obvious you didnt. just a tip.

Extending Network and Gaming Consoles

I have a airport extreme set up in my office. Downstairs I have 4 gaming consoles, which require fast internet speeds other wise it effects game play. The signal where 2 of my consoles are do not get great reception. So I know I can use an airport express, plug it in where I get reception downstairs and have it extend the range of my network.
However, I have 2 questions about this:
1) I have my extreme set up for N and my gaming consoles are G. The extreme is backwards compatible, but will the same hold true if I add an Express to the network? Will my G consoles still work?
2) In my head I think this would slow down the speed. I would think my console would have to go through an express, then the express sends up to my extreme, then finally out to the internet. Would adding an express slow the connection at all because now it has one extra point it travels through?
Thanks,
Andrew

1) I have my extreme set up for N and my gaming consoles are G. The extreme is backwards compatible, but will the same hold true if I add an Express to the network? Will my G consoles still work?
The 802.11n AirPort Express Base Station (AXn) can be added to your network configuration to extend the wireless range of the 802.11n AirPort Extreme Base Station (AEBSn). If you configure the overall extended network for the "802.11n (802.11b/g compatible)" radio mode, your "g" game consoles should be able to connect.
2) In my head I think this would slow down the speed. I would think my console would have to go through an express, then the express sends up to my extreme, then finally out to the internet. Would adding an express slow the connection at all because now it has one extra point it travels through?
The bottom line ... yes, extending the network and support for "g" clients will reduce the overall bandwidth available for the wireless network. If bandwidth performance is critical, you may want to consider switching to an all Ethernet-based solution.

Extend network and stream music together??

Similar Messages

Maybe you are looking for