Extend Range of Wireless Airport

My wireless range in my house is not long enough. How to extend the range. Previous have used extender in Windows.

You can extend the 802.11n wireless range of your Time Capsule (TC), with any of the following:
o Another TC
o An 802.11n AirPort Extreme Base Station (AEBSn)
o An 802.11n AirPort Express Base Station (AXn)

Similar Messages

Extending range with 2 airports?

Hi,
I have an airport extreme that won't cover a good part of my house.
I also have an older airport that I was wondering if there's some way
to use to extend the range of the airport extreme?
Thanks,
Carl

I have an airport extreme that won't cover a good part of my house.
I also have an older airport that I was wondering if there's some way
to use to extend the range of the airport extreme?
Yes, you can configure both base station into a Wireless Distribution System (WDS) to wirelessly extend the range of the 802.11n AirPort Extreme Base Station (AEBSn) with your 802.11g AirPort.
Here are the basic steps to do so ...
(Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. Also, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
Main Base Station Setup - AEBSn
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
o Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the main base station, and choose Manual Setup from the Base
Station menu, or double-click the base station to open the configuration in a separate window.
o Enter the base station password if necessary. If the base station is using the
default password of public, you will not be prompted for a password.
o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the base station you want to connect to this base station.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup - AEBS or AX
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as a remote base station.
o Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the remote base station, and choose Manual Setup from the Base Station menu.
o Enter the base station password, if necessary. If the base station is using the default password of public, you will not be prompted for a password.
o Enter the same network password as the main base station, if necessary.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
(ref: Pages 42-46 of "Designing AirPort Networks.)

CAN"T EXTEND RANGE OF NEW AIRPORT EXTREME WITH OLD AIRPORT EXPRESS

Hello Everyone,
I am having a heck of a time getting my new network setup with this new 802.11n Airport Extreme... Here is what I currently have going on:
I have a G5 1.8 it is my main computer and in ROOM #1... Connected to it is my NEW AIRPORT EXTREME via an Ethernet cable to one of the available ports. Also connected to the NEW AIRPORT EXTREME is my CABLE MODEM... This works great, It is setup and I have internet via Ethernet... I CAN EVEN CONNECT IN ROOM #2 with a PC and an Apacer wireless adapter...
Here is the problem
When I try to add an Airport Express V6.3 to extended the range of my network it can NEVER seem to connect to the network. I have checked the option to allow extension of the NEW AIRPORT in AIRPORT UTILITY and tried both with WEP security and with NO SECURITY... I cannot get the Express to extend the range of my network period... It has an error when joining the network???
Can Anyone Please Help Me?
PS. The reason to extend the network is so I can use the Notebooks in ROOM #3 and so a TIVO can see the Network! It is not far away!
G5 1.8 (2003) Mac OS X (10.4.8)

Also am having problems with my roomates HP Laptop... It connects for only a few seconds/minutes then has an issue... Really shady??? Any Ideas? He is Running Windows XP
G5 1.8 (2003) Mac OS X (10.4.8)

Extend range with multiple airport

I want to use an airport express to provide wireless music to speakers that are over 150 feet from my mac and my extreme n base station. How can I do this?

150 feet would be about the theoretical maximum for a wireless signal to travel....under the most ideal conditions.....which would mean no obstructions like walls or ceilings in the signal path. In other words, you would really need a line-of-sight situation between all wireless devices.
Realisically, you really need to consider a wired Ethernet connection for this type of application to avoid constant drop out issues.
A high gain antenna from a company like QuickerTek might be a possible solution as well, but this is always "iffy". You just can't predict wireless performance in advance, so it's important to understand the return/credit policies in case things don't work out as hoped.
http://www.quickertek.com/

How to set-up new Airport Express to extend range of Airport Extreme

Purchased a new Airport Express to use it as a range extender on existing home network with an operating Airport Extreme base station. While I've read instructions, I'm unclear whether the Express needs to be connected by ethernet cable for its initial setup, or can I simply plug it and initialize it wirelessly onto the same household network? (I've tried the latter but without success).

to edex67 and Bob Timmons:
My objective is to extend the wireless range of the Airport Extreme base station wirelessly - so I do appreciate that the Airport Express would needsto be located haflway between the base station and the "dead zone" area.
The suggestion of using a Powerline ethernet connection to the Airport Express has merit (especially as I have one available).
I continue to use OSX 10.6.8 - does this affect my set-up in any way?
My problem had been - and remains - how to configure the Airport Express in range extend mode - I did click these boxes on both the Extreme base station and the Express, however the Express still has flashing amber lights and error codes - one indicating no internet availability on the Airport Express.

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

I have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. unility says it has found a new base station

i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.

Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).

Can I extend the range with an Airport Extreme?

Hi there,
Is it possible to extend a wireless network's range with an Airport Extreme (just like you can do with an Airport Express)? Currently I have a Billion wireless modem/router but need to extend the range so I can use my PS3 in my bedroom. I would rather get an Airport Extreme instead of an Express so I can take it with me when I move out. Just need to know if the Extreme will do this as it doesn't mention it on the website.
Thanks for your time.
Regards,
Daniel

Welcome to the discussions!
+Is it possible to extend a wireless network's range with an Airport Extreme (just like you can do with an Airport Express)?+
The AirPort Express, AirPort Extreme, and even the Time Capsule can "extend a wireless network", +but... they are only compatible if you have another Apple router as the main device.+
Sorry, but none of the Apple products would be compatible to extend the range of your Billion wireless router using wireless only. You might want to check to see if Billion has a "range extender" or similar compatible device.

Extending an existing wireless network with an airport express

My wireless signal is quite weak in my room so I'm looking for a way to extend the range of the network by using an airport express. I understand i can't do this wirelessly but is it possible to run an ethernet cable from my existing router to the airport express in my room and then have a stronger signal in my room?
Thanks in advance!

Welcome to the discussion area, Aaron!
If you connect an ethernet cable from your existing router to the AirPort Express, and then configure the Express to "Create a wireless network" with the same name, security settings and password, this will in effect, extend your current wireless network.
The Express must be configured as a "bridge" to operate correctly on your network when you do this, meaning that the setting for Connection Sharing on the Express will be set to "Off (Bridge Mode).

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

Let me see if I can help you with the basic WDS configuration steps:
Note: To help facilitate the setup, temporarily connect the AXn directly to the AEBS LAN port using an Ethernet cable. Once the setup is complete, you can move the AXn to the desired location. For all configuration steps you will be using the AirPort Utility. Before starting, be sure to jot down the AppleIDs for both base stations.
802.11g AirPort Extreme Base Station (AEBS) Configuration
AirPort Utility > Select the AEBS > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network
Manual Setup > WDS tab
WDS Mode: WDS main
Allow wireless clients (checked)
WDS Remotes: <enter the AppleID for the AXn here>
Click on Update and allow the base station to restart.
802.11n AirPort Express Base Station (AXn) Configuration
AirPort Utility > Select the AXn > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network (Note: You may have to hold down the Option (Mac) or Control (PC) key to see this option in the list.)
Manual Setup > WDS tab
WDS Mode: WDS remote
Allow wireless clients (checked)
WDS Main: <enter the AppleID for the AEBS here>
Click on Update and allow the base station to restart.

Can i extend the range of an airport extreme with another airport extreme and use the ports on the airport extreme i used to extend the network?

That seems like a complicated question.
I have a Time Capsule (which the HD *****, but that is matter for another discussion) and want to extend the range with an Airport Extreme because I have 2 devices in one room that do not do wireless but have Ethernet ports.
The room has iffy WiFy connectivity too.
I want to know if the 3 ports on the Airport Extreme still work after configuring it as an extender rather than a router.

The thing is that I want to know if I can put the Airport Extreme at the edge of the room where the existing Base does not reach.
This will not work.
Remember, an "extending" AirPort can only extend the quality of wireless signal that it receives. For that reason, it must be located where it can receive a strong wireless signal in order to work effectively.
For example, let's say that your "main" router was on one end of the house and you want to extend the signal to reach the other end of the house. In this case, you would locate the "extending" AirPort about half way between the main router and the other side of the house.

Extending Range of Airport Extreme via LAN connection to Airport Express

I am an expat living overseas. I live in a 100 concrete walled house and thus when trying to set up a wireless network I have very limited range. Using Airport Extreme is not a problem downstairs...but to extend the wireless connection upstairs had been a challenge. What I've attempted to do is use the LAN connection on the back of the Airport Express Base Station and run the line upstairs along the side of the house into a room upstairs. I then have connected the ethernet line to an airport express in this room. My computers upstairs recognize the Airport Express and are connected to it...but I can't get an internet connection to those computers. Additionally, the Airport Extreme Base Station does not recognize the Airport Express as part of the network (wireless or LAN). Any suggestions?

I would bring the Expresses to the room where you have your Extreme and factory reset the Expresses so that they are in the original condition when they came out of the box - they will reflect their Apple IDs.
I would then open the Airport Utility (I am assuming you have the new Extreme, not the old one). Scan for the Expresses and then join them to the network.
If they work in the room where your Extreme is located then they are configured appropriately. They I would try moving them back to the room where you want to extend your network. If they then do not work you will know it is not the Express but the amount of concrete and metal in your building.

How to extend the range of my Airport Extreme network by adding an Airport Express

How to extend the range of my Airport Extreme network by adding an Airport Express?

You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
The instructions that I will provide are for using AirPort Utility 6.0, which you have.
Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
Make sure that the wireless is turned on your Mac
Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
Click on the rectangle, and then click on the AirPort Express xxxxxx listing
AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that the Express be configured to "Extend" your wireless network.
Edit the Base Station name to your liking, then click Next in the lower right hand corner
Allow a full minute or two let AirPort Utility do its work
When you see Setup Complete, click Done at the lower right of the window.
Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
You should be in business.

Extend wireless airport extreme with airport express with through ethernet cable, extend wireless airport extreme with airport express with through ethernet cable

i want to extend my wirless range i using airport extreme upstairs and airport express down i have ethernet cable linking the two but airport express seems to go wireless and is extremly slow any help appreciated

Start with a "hard reset" of your Express - press and hold its reset button continuously, about five seconds, until its LED flashes rapidly. You will need to reconfigure all its settings.
Connect it to your Extreme with your Ethernet cable. Using AirPort Utility, configure its Internet Connection to "Connect Using" > "Ethernet" as in the following screenshot:
If it had been previously configured to "join" a wireless network and you connect its Ethernet cable to your wired LAN, you may experience what you are describing.

Extend Time Capsule Wireless Range

I am having trouble with my Time Capsule's wireless range. I am not a networking expert by any means. I own an old building that is 4 stories connected by stairs with thick walls. All the rooms ethernet cables converge in a cubby on the 3rd floor. I placed my Time Capsule in the cubby, but I couldn't receive a wireless signal from the 1st floor. This is ironic because I have an old Netgear G router that sends signals throughout all 4 floors. So I bought an Airport Express to extend my network wirelessly, but the signal has been unstable perhaps because the Time Capsule's wireless signal is too weak. So I want to connect the Airport Express on the 1st floor using the Ethernet link from the 3rd floor Time Capsule which is my main router. From my research, I discovered about WDS networks, which I believe you have to use in order to create a network with multiple Apple base stations linked through ethernet.
I called Applecare who told me:
-To connect from Time Capsule to Airport Express using Ethernet, must use WDS network. Setup Airport Express as Relay, NOT Remote.
-Relay- Direct ethernet connection from Time Capsule to Airport Express, then wireless connection from Airport Express to Macbook.
-Remote- Wireless signal from Time Capsule to Airport Express, then direct Ethernet connection from Airport Express to Macbook
I have several questions for you wise people out there:
1. To extend the Time Capsule wireless network using the Airport Express, but connected directly via ethernet, do I need to setup a WDS network?
2. I prefer to just use the simple Apple settings "extend network wirelessly". Will this setting only boost a wireless signal received from the Time Capsule? Can it not extend a wireless signal sent directly from Ethernet?
3. I'm considering getting a Quickertek Triband antenna to place outside the cubby. Anyone have any experience with Airport external antennas?:
http://www.quickertek.com/products/timecapsuletriband.php
Any information would be much appreciated! These networking issues have been giving me months of headache.
Thank you!
Alexander
Specs:
Apple Time Capsule 1TB
Airport Express N version
Connected with 2.4ghz. band to N capable Macs.

Extending your network with an AirPort Express (AX) won't boost the TimeCapsule's (TC's) range per se. It will expand the network's range by adding another transceiver.
If you'd prefer to avoid using Ethernet to connect the TC and AX, you might get a better signal on the first floor if the AX was on the second floor, i.e, roughly halfway between the TC and the 1st-floor computer. [Extending the range of an 802.11n network|http://docs.info.apple.com/article.html?path=AirPortUtility/5.1/en/ap21 24.html] describes how to configure them.
If an Ethernet linkup is no problem, though, that should work even better. In this case, it's best to use different (by 3 or more) channels on the 2 stations to reduce the chance that they'll interfere with each other.
Either way, it's best to use the same network name, network password, and encryption on both stations so you can roam freely through the building without needing to switch manually between them.
[Designing AirPort Networks 10.5-Windows manual|http://manuals.info.apple.com/enUS/Designing_AirPort_Networks10.5-Windows.pdf] is another good resource you may find helpful.

Extend Range of Wireless Airport

Similar Messages

Maybe you are looking for