Extend/reduce time to voicemail pickup

I thing I notice that os 10 haven't been able to do, that is, control the number of incoming phone rings prior to out going greetings. My old blackberry 9630, I had control over that.
MOD EDIT: Subject changed to reflect a new topic

customize1 wrote:
I thing I notice that os 10 haven't been able to do, that is, control the number of incoming phone rings prior to out going greetings. My old blackberry 9630, I had control over that.
This (time to voicemail) is not a BlackBerry feature but is controlled by your mobile provider.
And not a feature request (I'll ask a moderator to move this post).
As a norm, most all carriers have a default 15 seconds of ringtime until the voicemail picks up. That can be extended to 30 seconds.
If you do need additional ring time before voicemail, The simplest method is to call your carrier and request a longer ring time, up to 30 seconds.
There is another method:
Dial *#61# from your phone. ...
You should see a new screen that displays a bunch of information about what's getting forwarded. ...
Now, dial **61*+11234567890*11*XX# and hit Send, where 11234567890 is the number that you found in step two and XX is the number of seconds you want to wait until voicemail picks up.

Similar Messages

Extend the time before voicemail picks up

How can I set the number of rings on my phone before voicemail picks up? The default of 20 seconds is too short. I would like to extend the time to 30 seconds. How can I do this?

It's set by the system at roughly 30 seconds; sometimes using a different ringtone helps.

How to extend ringing time before voicemail is activated?

I would like to setup the phone such that voicemail is not activated for 10 or 15 seconds, but I can't figure out how to do it. This was pretty easy to do on some previous phones I used.
Any ideas how to do this?
Thank you for your time.

I contacted SingTel (Singapore Telecom) and they gave me a code that I had to "call" from the phone. Seems to work OK.
The bottom line is that you can't do it onboard the phone. As you guys said, you have to find out from the wireless provider.
Thanks.

Updating my iPhone 5 software has shortened the number of rings before the answer phone kicks in, how do I extend the time delay?

Updating my iPhone 5 software has shortened the number of rings before the answer phone kicks in, how do I extend the time delay?

If the codes Tanzim mentioned don't work, just call your carrier and ask them to extend your time until voicemail picks up, to 30 seconds. They do this routinely.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I extend ring time on calls?

How do I extend ring time on calls?

Are you asking about how long before it goes to voicemail? If that is the question, then you need to contact your carrier. They are the ones that control that. It is not done at the phone level, that is carrier level settings. It is not based on rings, it is based on time. They may be able to extend it for you.

How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly

I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
Thanks

No more meseges.
في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
New discussion activity
Bob Timmons has posted in the AirPort community.
How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
To post a reply, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

Using Airport Express to Extend a Time Capsule Network: Results (*Long*)

Thought I would share my recent (2 hours ago) experience with setting up an Airport Express to Extend a Time Capsule 802.11N 5Ghz Network. Basically I just followed the directions in the Apple Airport Utility, using the "Extend a Wireless Network" setting:
Time Capsule (TC) 802.11N 5Ghz: In computer room
Linksys (LNK) 802.11g configured as dual network router with TC, also in computer room.
Airport Express (AE): In living room, about 50' away, several old plaster walls in between.
According to iStumblr:
1) I get an 80% signal from my TC when my MacBook is practically sitting on top of it.
2) I get an 88% signal from my Linksys 802.11g sitting next to the TC
3) I get 35% signal from my TC when my MacBook is in the living room. This is NOT enough signal, for some reason, to maintain a decent internet connection.
4) I get a 46% signal from my LNK from the same location. This IS enough signal to connect to the network.
5) With the AE configured as "Extend a Wireless Network" to the TC, and placed in the living room (again, about 50' from the TC base station), I get a 55% signal from the AE (which shows up as the same name as the TC network, for obvious reasons) Again, enough signal to connect to the network.
I did some internet speed tests using SpeedTest (take these with a grain of salt, of course)
1) From computer room over TC: 18Mb/s~22Mb/s average over 2 days of testing
2) From computer room over LNK: 18Mb/s~22mb/s average over 2 days of testing
3) From living room over AE(extended network from TC): 5~7Mb/s average in the last 2 hours
4) From living room over LNK: 12~14Mb/s average over 2 days of testing
Preliminary conclusions:
1) Setting up an extended network is pretty straightforward, and works without issue.
2) My 802.11g network with my old Linksys is far superior than my new extended 802.11N 5Ghz network, at least for internet connection speed.
3) I feel a bit irritated buying this AE now to extend my 802.11N network, if its not going to give me any advantages over my ancient 802.11g network
4) File transfers may still be better over the 802.11N-I will test that out at some point.
5) I have not tried WDS instead of "Extend a Wireless Network"-not sure what the benefits would be.
Computer Notes:
MacBook Aluminum-MB(Al) 2.0 C2D (802.11n)
finds 8 wireless networks in my neighborhood (3 of them are mine)
MacBook White-MB(Wh) 1.83 CD (802.11g only)
finds 10 wireless networks in my neighborhood (3 of them are mine)
Oddly, the signal strength of my networks isn't that different between the two computers-between 2% and 5%, even though it can't see as many networks. The 2 networks the MB(Wh) CAN see are at around 21% and 25% signal-not sure why the MB(Al) can't see them at all.

Your biggest mistake is confusing signal strength with signal quality. The signal indicator indicates strength and nothing else. You need to be using iStumblr to look at SNR (Signal to noise ratio).

I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red-keys out of order, and --Volume corrupt, can't be repaired. I tried

I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red…keys out of order, and ……Volume corrupt, can't be repaired.
I tried to do a system install, but message said…disk can't be changed. Will a complete erase and install fix this ?
Everything is backed-up.

There's hardware and software.
Your drive could physically be in good condition but something has caused the file structure to be messed up (it just happens sometimes). The directory that keep track of files is corrupt. Disk Utility can help determine if that is the issue. In some cases it can repair the problem but it cannot do it to a drive that is being used to boot the system while you are doing that. You have to boot from another drive. Some things DU cannot repair and you need to try a stronger utility such as Diskwarrior.
A failing hard drive (one with mechanical issues) can be a cause of file structure issues but this is by no means always the case. Apart from looking at the SMART diagnosis feature of Disk Utility (and smart isn't totally reliable) there often isn't a way to tell if a drive is failing until it suddenly happens, which is why you need to maintain backups.
In your situation it does sound serious and not just minor directory corruption. You can try erasing (formatting) the drive, You may need to do this if it is really corrupt, in which case there could be underlying physical issues. I use old technology but if you have the patience you can try erasing the drive with the security option of writing zeros once (don't do more unless you are going on a 3 week vacation). This makes the drive not simply assume everything is okay by forcing it try every part of the drive by writing data. If something is gong wrong you may find it marks a lot of bad sectors, or flat out refuses to format. Then you know you need a new drive.

How can i reduce time of execution

Hi all,
    I have a report program having HR logical database (PNP). This report were developed 1 year back. which is running well. This program were designed that it should take 1.20 hour execution time. But since one week it is taking 3 hours. So i need to find why it is taking this much of time. I didn't get any clue to find out. please guide me how i can solve this issue.
   Right answer will be appriciated. Thanking you

Hai,
To reduce time of execution go for runtime analysis.
I think this documentation will help you out...
RUNTIME ANALYSIS
The runtime analysis is an additional development workbench tool that is quite useful for analyzing performance of an ABAP / 4 Program or transaction. With this tool, the system can display information about:
     Executed instruction
     Accessed execution time.
     Tables and Types of access.
     Chronological execution flow
The runtime analysis tool creates lists that reveal expensive statements, summarize table accesses. Runtime analysis is specifically designed for tuning individual programs and transactions.
The Runtime Analysis tool measures ABAP/4 statements that are potentially expensive in terms of CPU time. The most significant of these are:
Statement used for database access like select.
Statement used for modularization such as module, perform, call function.
Internal table statements like append, collect.
Starting Runtime Analysis
     From ABAP/4 development workbench select Test Runtime Analysis.
     From ABAP/4 editor, select utilities more utilities Runtime Analysis.
     From ABAP/ source code screen, select Execute Runtime Analysis.
     From R3 screen, select System Utilities Runtime Analysis.
     Entering Transaction code SE30 in the command field.
Following screen is the initial screen for SE30 transaction.
On the initial screen, select the needed object you want to analyze i.e. program or transaction. Enter the name of the object. Click on execute. The system will execute the specified object and will generate a trace file or performance data file, which can then be analyzed when the transaction or program is finished.
Analyzing a performance data file
These files are created at operating system level and many times occupy large memory space, so be sure to remove the files, which are no longer needed.
To analyze the files:
     Click on Analysis
     Following screen is displayed
     From GOTO option you can get overview of runtime analysis.
The options are as follows:
     Hit List Displays a list with the most system expensive instructions.
     Tables Displays the most important tables, the number of accesses and the time needed for the accesses.
     Group hit list Displays a list with the performed instructions classified by instruction type.
     Call hierarchy Presents a chronological listing with the flow of calls during the execution of a program.
During Runtime Analysis, the system measures the statements and stores these measurements in a performance data file. If you measure the same program or transaction several times, the data can vary. Many factors make it difficult to reproduce identical result. E.g., Network traffic.
When you evaluate this file, the system displays the overview - Runtime Analysis Evaluation screen including a bar chart for total execution time. From this screen, you can analyze several types of information like:
     Hit list: displays the list with the most `system-expensive instructions.
     Tables: displays the most important tables, the number of accesses and the time needed for the accesses.
     Group hit list: displays a list of performed instruction classified by its type.
     Call hierarchy: presents a chronological listing with the flow of calls during the execution of program.

Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

Hi Glenn,
Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Try Solution 2: Clean up cached user login information.
Please share the results after performing the steps.
Thanks,
Atul Saini

Why does the sound stop after about 10 minutes? I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings.

I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings. Any suggestions? This is my first iPod and I am ready to take it back if I am unable to extend the playing time. Frustrating!

Rosapeas wrote:
I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings. Any suggestions? This is my first iPod and I am ready to take it back if I am unable to extend the playing time. Frustrating!
I can imagine that is frustrating as heck. My daughter has one of these and I know for a fact hers does not turn off after 10 minutes because I have to turn it off for her every night after she has fallen asleep. Below is what Apple has to say about it from a troubleshooting standpoint.
"If music stops when the iPod nano screen turns off m Make sure the earphone port is free of debris. m Make sure the earphone or headphone connector is pushed in all the way. To see an illustration, go to support.apple.com/kb/ts3700."
Are you using aftermarket ear buds or speakers when you listen to these lectures??? If so maybe it has something to due with a compatibility issue.

How do you extend the time of a rolling credit?

I'm working on my wedding dvd, and I am including a rolling credit that lists all of the guests to be pasted at the end of the movie. The problem is when I include more and more people to the list, the lettering gets smaller in a bid to fit all the text in to a certain time frame. Obviously, the credits should be allowed to run for a lot longer to allow for the extra text. Is there a way of extending the time that the credits last for. I have tried dragging it, have fiddled with the scroll time (58 secs I think, not long enough for what I want to do.) Is it possible to do, or is this way to ambitious for this particular program. If so, would Final Cut do it?

Hi wildgherkin - have a look at this very good, cheap app that does what you want and more. It is fully compatible with imovie. You can export the file directly into an iMovie project if you want.
http://www.rqs.ca/RollingCredits/

Synchronous Scenario. How to reduce time. Pls advice urgent.

Hi All,
I have Synchronous Scenario. It has no BPM , simple synchronous scenario (HTTP --- Webservice).
It is taking 10 seconds. How can I reduce time of this scenario.
Pls advice

Hi,
The Time Consumption is based on below factors
1. the amount of data to be processed across the interface.
2. The response time of Receiver system
3. Type of Mapping used and implementations of any complex logics with Advanced UDFs etc
4. Hardware configurations
5. Resource Consumptions etc.
please refer below fine tunning docs.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/489f5844-0c01-0010-79be-acc3b52250fd
XI Performance Benchmarks ?
Thanks
Swarup

How can I extend the time I am timed out on the new Firefox version?

The new version of Firefox which I recently installed times me out after a very short period of time. I can I extend the time that Firefox times me out to at least one hour of inactivity.
== This happened ==
Every time Firefox opened
== right after I installed the new Firefox version today

If you have an Exchange account on your iPad for which the admistrator has specified a limit on how long you can set the auto-lock, the only way to change it is to remove the Exchange account. Once you put the Exchange account back on, the restriction will be back in place. Apple has nothing to do with this.
Exchange admistrator often require that devices be passcode protected and that the device will autolock so they delete the "Never" setting.

How to extend standby time Nokia3110c

I know from local forum that Nokia3110c standby time is up to 5 days (reality), while my Nokia get only 2 days. Can someone share idea how to setup phone to extend standby time? ie. wallpaper, screen saver, sleep mode, display submenu, call submenu, phone submenu or otherelse.

1. Turn off the features you do not use.
2. Turn off animated wallpapers & screensavers.
3. Activate sleep mode and power-saving mode on the menu.
Consult your manual for other features you can turn-off if not in use. =)

Extend/reduce time to voicemail pickup

Similar Messages

Maybe you are looking for