Extend telephone system extension to home - PAP2 and SPA-3102

Hi All,
I was wondering if someone could explain if this setup is easily implemented, or if it would be best left to a professional!
In short I am trying to extend one of my office telephone extensions to my home. I have found this product/setup on eBay which does exactly what I want it to but it carry's a rather large price tag.
http://cgi.ebay.co.uk/Voip-adapters-Extend-your-telephone-system-anywhere_W0QQitemZ280227103178QQihZ018QQcategoryZ34165QQcmdZViewItemQQ_trksidZp1742.m153.l1262
I already have the PAP2, and am planning on buying the other piece of hardware but I just wanted to check that this is something I could setup myself. Any and all advice will be gratefully received!
Kind regards,
Matthew
P.S. I am fairly familiar with networking but I have very limited knowledge on VoIP.

Hello,
look at this page http://www.provu.co.uk/support.html , check manuals named :
Linksys ATA Back-To-Back 1x SPA-3000 and 1x SPA-1001.(pdf)
Linksys ATA Back-To-Back 2x SPA-3000.(pdf)
Linksys ATA Back-To-Back 2x SPA-3000 and 1x SPA-2000.(pdf)
SPA-3102 has VoIP and PSTN part moreless identical to SPA-3000, just has additional build-in network router
SPA-2102 has VoIP part moreless identical to SPA-2000, just has has (like SPA-3102) build-in network router
PAP2T is similar to SPA-2000
PAP2 is very similar to SPA-2000
SPA-1001 is (except of dual voip registration) similar to one half of PAP2 - VoIP adapter with one port for analog phone
Thus using the mentioned info you shall be able to setup phone line VoIP extension.
Your knowledge of networking will come handy, the network setup is important part of this setup.
Message Edited by Scorpio-cz on 03-10-2009 10:11 PM

Similar Messages

2questions: system extension cannot be used and reinstalling updates

My error message on start up says:
*System extension cannot be used*
*The system extension “/System/Library/Extensions/SeratoScratchDriver.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update*
It appeared after I was in the middle of downloading software updates and my wireless dropped out. I downloaded them again to see if the error message would disappear once they were installed and then I got the never ending loading screen. I tried restarting and now it just starts up as normal with the error message still appearing. I also tried reinstalling serato scratch live. Any advice??
If I archive and reinstall leopard..which seems to be the best solution for the blue screen, will I lose any files? Do you think this might get rid of my error message as well?

That will happen if the kext is not owned by root and/or doesn't pass code signing verification. If an installer was interrupted then it probably didn't finish its job and you'll need to trash that bundle.

SIP phone and SPA 3102

Hi,
I don't have an ipPBX or call signaling server. Can I register a SIP phone on the remote SPA 3102 then call the remote number. SPA 3102 is on remote site, the FXO port is connected to a phone line. My SIP phone is on local site, connected to Internet.
Thanks

yytellmey wrote:
Hi,
Can I register a SIP phone on the remote SPA 3102 then call the remote number. SPA 3102 is on remote site, the FXO port is connected to a phone line. My SIP phone is on local site, connected to Internet.
Yes you can do that. You need to know the ip address where you are calling. This is called direct ip dialing. You can call the SPA3102 and have the attached phone ring, or you can call the SPA3102 and have it dial a call out the pstn line. It all depends on what you want to do.
Initially you can get it working with whatever ip address you have at the moment. For the long term, if you don't have a static ip address you can get a symbolic address from someone like dyndns.com and then when your ip address changes you setup some means, either thru your router that supports dynamic dns, or with a pc program to keep your ip address updated at dyndns for your symbolic address.
You almost always have to forward the sip signalling port in your router to the SPA3102. You may also have to forward the spa's rtp ports in your router to the SPA3102.
There are a couple of ways to configure the SPA3102 when you want to bridge the call out the pstn line. The simple way is to just return a dial tone to the caller and then the caller enters the pstn number they want to dial. A more complicated way is to send a sip invite to the SPA3102 and have the SPA dial the number. The latter method is more reliable because you don't have to send dtmf signals over your voip link.

I tried to work this for a telephone system Yvonne but stopped work and not work, what do I do

Tried to work this phone system iphone3g but stops working system did not speak ..What can I do to restart the phone???

Post in your native language... your statments make no sense in English.

Error: system extension cannot be used

I get the error "system extension cannot be used" and then it says below it:
The system extension "/System/Library/Extensions/AppleIntelAC97Audio.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.
it says the same for:
AppleIntelAC97Controller.kext
BJUSBLoad.kext
CHUDKernLib.kext
CHUDProf.kext
CHUDUtils.kext
EPSONUSBPrintClass.kext
hpPlugInInit.kext
KLog.kext
LexmarkUSBMerge.kext
prlhidhook.kext
prl_hypervisor.kext
prl_netbridge.kext
prl_tg.kext
prlusbconnect.kext
prl_video.kext
prl_vnic.kext
RBIOKitHelper.kext
Soundflower.kext
Wacom Tablet.kext
I have done permissions repair at least 10 times in a row and it still comes up with things to repair but is there another soloution?
Also, It says i have insufficient permissions to get onto my external HD now as well.
Anything will help...

I had the same problem. Then due to another unrelated problem I did a file system check in single user mode and this problem too went away. I am not sure if it will also work for you but no harm to try.
Shutdown, restart by pressing power button. As soon as you hear the chime, press cmd-s. After a while lot of text will roll down the screen, leave the keys. At the prompt, type fsck -fy. Note the space. then hit return. If at the end of the run you get something was repaired, then run it again till you get 'OK'. After that type reboot and you will boot into regular OS X. Then do whatever you did to get this message and see if it goes away.

Changed Permission Settings: "System extension cannot be used"

I was having some weird problems with file sharing on my network recently, so I tried changing around some of the permissions on my drives to see if I could resolve it. For some reason I was getting messages saying I didn't have permission to copy files from one computer to another on my network. This seemed to come on randomly as we have been doing file transfers this way for quite some time now. I looked at our file sharing preferences in the System Preference's and added all 4 drives from my Mac Pro in there and made sure that my username had full read and write capabilities. I then tried logging into my Mac Pro from my iMac, just like I've done in the past, and I was still unable to copy the files. So I removed all the folders and turned off file sharing. I then clicked 'Get Info' for my main Macintosh HD and tried changing the permission settings there. I clicked the option to make my username the owner, and then I clicked 'Apply to enclosed items...' and this brought up a progress bar that I let go for about 10 minutes. Then I got a pop-up error message stating "System extension cannot be used" and had an extension path listed underneath, saying it was installed improperly and cannot be used. This happens an endless amount of times. It seems to be giving me this message for every single extension on the computer. If I hold down enter the pop-ups just keep coming with different extensions listed.
I hope someone with some insight on how permissions work in OS X Lion can give me some advice on how to resolve, and possible the correct way I should be setting up sharing if I've been doing wrong all this time. What strikes me as odd is that I never had any issues with sharing anything up until about a week or so ago, and I can't remember if there were any system updates that I installed that might have something to do with this.
Any help is much appreciated, thanks!

I had this problem recently in addition to my laptop getting stuck on the Apple logo and spinning icon. It took me a long to time to work through it so I thought I would share what I did to make it easier for others.
The best thing to do when having permission problems is to do a 'disk permissions repair'. You can do this using the disk utility app found in your applications/utilities folder. This will attempt to rewrite all the permissions that were incorrectly set. When it is doing this it is common to get a message saying 'ACL...found and not expected...' do not go and delete these files. Its normal for this correction process to take more than 30 minutes, for me it took an hour.
If this proccess doesnt work for you than you can also try a disk repair.
If you can't boot using the normal disk you can also access this program through the recovery boot (holding Command-R of Option at startup), through the safe mode (holding Shift on start up) or through a recovery CD. You can also boot in a terminal type mode but this is a last ditch effort as a misspelt command could do more damage. personally, because I do not know what the commands I am using actually mean, I would recommend talking to a person at apple then using this approach.
Hope this helps

100's of ' System extension cannot be used ' messages and system instability

Ok, I was trying to change the folder background on my home drive in finder.
I Changed the background in the Home drive and then went to 'Show info' and clicked 'apply to enclosed items' in 'sharing and permissions'
Ive had over 300 messages saying
'System extention cannot be used
The system extension "/system/library/Extensions/*****.kext"
was installed improperly and cannot be used
Please try reinstalling it, or contact the products vendor for an update.
examples include
AppleStorageDrivers.kext/Contents/PlugIns/MKE-SR-8171.kext
/System/Library/Extensions/AppleUSBTopCase.kext
/System/Library/Extensions/AppleUSBTopCase.kext/Contents/PlugIns/AppleUSBTCButto ns.kext
/System/Library/Extensions/BootCache.kext
etc etc
I tried repairing permissions, but that doesnt work. Im constantly getting random permission error messages, my plugins in logic dont work properly and are generating error messages, audio wierdness in logic, all kinds of stuff
oh if i could turn back the clock. What have i done?, and how can i fix it?

Hi, thanks for your reply, and sorry if my description was unclear. I started by changing the folder background here:
Then I went here (apply to enclosed items). You can see on the shot ive taken, permissions state 'you can only read' , and under name 'fetching'.
Then, after a few minutes, i got around 300 of this (**** refers to all the 300 different filenames that came up)
'System extention cannot be used
The system extension "/system/library/Extensions/*****.kext"
was installed improperly and cannot be used
Please try reinstalling it, or contact the products vendor for an update.

Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes. I have downloaded new Extension Manager for CS5. and still c

Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes. I have downloaded new Extension Manager for CS5. and still crashes. Anybody else experience this? email:[email protected]

Hi bigd_bud,
Can you see if the solutions in this post help?
Re: Adobe Extension Manager crashes on mac 10.8
Thanks,
Preran

What is this error message about, "The system extension "/Library/Frameworks/PrivateTunnel.framework/Versions/Current/Extensions/tap.ke xt" was installed improperly and cannot be used"?

It appears as a window with the following text, "System extension cannot be used. The system extension “/Library/Frameworks/PrivateTunnel.framework/Versions/Current/Extensions/tap.ke xt” was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update."
I close it by clicking "Ok", and it doesn't seem to affect the system performance in any way, but it's annoying knowing that it's there. The problem is quite old, and has persisted through several OSX updates.

hello,
I have the same problem. does anyone have any ideas on what's going on and or how to fix it.
Thanks!!
Luis

HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry

Help with this error message: System extenstion cannot be used:The system extension "/System/Library/Extensions/AppleACPIPlatform.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

I have this error message:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleACPIPlatform.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
Please help. Is there a update or how do I reinstall?
Thanks,
John

I submitted the above question, later finding that it has been answered by Buller already. No one need reply as Buller's answer seems to solve the problem for others, and I'll try that.
Jim

JDeveloper and Team System Extension not working

I am using JDeveloper 11g (11.1.1.1) and latest VSTS extension. The Team System extension does not work.
Here are what I have done:
1) Install JDev, JDev team system extension, TFS team explorer.
2) Workspace created in Team Explorer.
3) JDev Versioning control set for Team system. Select workspace, refresh it.
4) Create a new application/project under team explorer workspace. In Application explorer, The application and project showed up with a "X" mark - not in source control.
5) Add the application/project into source control. Succeeded.
6) But - the application and project still show up with "X" mark. Trying to add again, JDev pop up error message: "file already exists in source control". Files still show up in pending changes window.
I am using windows XP SP2 for development.
Any ideas? Please, this is urgent.
Edited by: user8658859 on 2009/9/24 上午 2:55

I am betting you are running 4.3? I just upgraded my GS3 to 4.3 and now I can't get the GMail smart extension to work. Previously, I was able to on the same phone (but running 4.1.2) but couldn't use WatchIt. Now I can use WatchIt, but can't use Gmail. How frustrating!!

Computer crashed. Had to rebuild. Everthing loaded and working properly except itunes. Operating System Windows 7, Home Premium. Itunes was downloaded and installed. Itunes will open, but not connect to internet. No itunes store, CD artist, name of songs.

Computer crashed. Had to rebuild. Everything loaded and is working properly except itunes. Downloaded itunes and installed. Will not connect to internet. Keeps on trying to connet to itunes store, but never connects. If I insert a CD all I get is the track number. No artist or song information. Operating System Windows 7 Home Premium.

Hello Rachet Jaw,
Thank you for the details of the issue you are experiencing with iTunes. I found a few articles I suggest for the issue you described.
If you are getting a white screen when accessing the iTunes Store, I recommend reviewing this article:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
If you are still not able to access the store or are getting a different error than just a white screen, I recommend the following articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT1199 I have an Apple MacBook Pro 1,1 Mac OS X 10.6.8. I have tried to load Native Instruments Guitar Rig 4LE. It would not load and said the following. System extension cannot be used.

I have an Apple MacBook Pro 1,1 Mac OS X 10.6.8. I have tried to load Native Instruments Guitar Rig 4LE.
It would not load and said the following. System extension cannot be used.
The system extension "/system/library/Extensions/AppleUSBthernetHost.text" was installed improperly and cannot be used.
Please try reinstalling it, or contact the product vendor for an update.
I do not have a copy of the OS X 10.6.8 software. It is second hand so I have no product vendor to contact.
What can I do?

You recently updated iTunes to v.11.4? This message has popped up on many a Mac screen when this version was first made available, because this kext was obviously faulty.
You should try to download iTunes 11.4 again from Apple's website: the new version bears the same name, but this kernel extension has been updated, and the issues it was causing are now a thing of the past.
Should solve your problem, too...

TS1424 When attempting to download iTunes I keep getting error The system administrator has set policies to prevent this installation. This is home PC and I am administrator. Any help is appreciated.

When attempting to download iTunes I keep getting error The system administrator has set policies to prevent this installation. This is a home PC and I am the administrator. Any help would be appreciated.

Hi PSpark!
I have an article here that I believe will help you troubleshoot this issue a little further. That article can be found right here:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Extend telephone system extension to home - PAP2 and SPA-3102

Similar Messages

Maybe you are looking for