Extend the material for the storage location in mass.

Hi,
Can any genius let me know how can I extend the material for the storage location in mass.
Currently our support team doing it by trx MMSC, but now we required to extend the materials for storage location in mass for which MMSC is to lengthily
Is there any other way apart LSMW for MMSC.
Regards,
Shyamal.

hi
did u tried mass
try this
go to MASS
then select BUS1001
go to plant data for material execute
click on data records to be creatd
then add material in field
then select select field button and add storage for extrenal procurement then there u will find on filed for external proc
now do mass change
reward if helpful
regards
kunal

Similar Messages

Can we delete material for particular storage location using MMSC

Hi,
Can we delete a Material for particular storage location of a plant usign MMSC Transaction?
Thanks in advance.
NDS

Hi, It is not possible to delete the storage location from MMSC once it is saved, Material gets extended for that storage location, U have to delete the material at the storage location level.
Now the only option to delete this assignment is with archiving.
T-code: SARA object MM_MATNR
Refer below link for procedure
[Deletion Storage Location From MMSC |Re: Deletion Storage Locaion From MMSC]
[Cannot delete Sloc in MMSC|Re: Cannot delete Sloc in MMSC]

Can we block a material for particular storage location ?

We can allow material to storage locations by MMSC. Can we block a material for particular storage location ?
Please share ur view.

Hi,
If you want a material to be blocked, go to the Basic data 1 view of the material,there in the genral data you have " X-plant material status ". Also in Cost estimate 1 view of the material you have Plant Specific Material status. Use the options available to block the material in these two views.
Also u can goto MM06 where put material,plant,storage location.When u select enter just tick the check box of material,plant and storage location and save it.
Pls reward if found useful.
Regards,
Indranil
Message was edited by:
INDRANIL BHATTACHARYYA

Error :Maintain pricing conditions for the material for the excise invoice

Hi
i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
Message no. 8I629" can some body can help me.
with regards
Narendra kumar

Hi,
goto tcode fv11 u have to maintained the condition.
first enter the condition type like jmop -
then enter, next screen u have the select the below comination.
select the plant/vendor/material base u have to maintain the conditions.
Thank's
MVS

Maintain pricing conditions for the material for the excise invoice date

When I am doing MIGO (Release GR Blocked Stock-movement type) t)he system is giving an error "Maintain pricing conditions for the material for the excise invoice date"I am attaching screen shot for reference.
I request if any one can provide me the solution

Hi,
Check did you have entry of that movement type in the following path where you specify which movement type relating to goods receipts involve excise invoices
SPRO -
> Logistics general -> tax on Goods Movements-> India -> Business Transactions--> Specify Which Movement Types Involve Excise Invoices
Regards,
Biju K

Mandatory the Material Quantity and Storage Location Field in Order

Hi Expert,
Please advise. how can i set the Maintenance order,
If Material field is Filled
Then Mandatory the Quantity Field and Storage Location Field.
Thank You
Best Regards

Hello,
Please Use Below User Exits to get your Functionality
IWO10009 --->PM Order Check for 'Save' Event
CNEX0026--->general inspection of material
Regards,
Rakesh

How to restrict the material for speific storage type

Dear all,
i am maintained the X - material to 001 warehouse and 001 rack storage type when i try to create TO for putaway process it will allow me some other storage type like open,shelf....as per my client requirement it should not be .....
i am using manual strategy for putaway proces ....kindly guide me....
Thanks
Muthuraman.D

Hi,
The storage types during Putaway are proposed based on the strategy defined.
Change the stcok placement indicator in WM view 1.
If you have a storage type search strategy defined that matches your requirement, then maintain the same in WM view 1 for the material
Hope this helps
regards

Is sony correcting the issues with the PS4 controllers. The material for the analog sticks need to be changed.

I would like to get a ps4 but both my friends ps4 controllers analog sticks are tearing. I have used both the ps4 controller and xbox1 controller, I like both but prefer the lighter feel of the xbox1 analog sticks they are more comfortable and durable. I dont want to buy a xbox1 but if sony does not correct this issue it will sway my decision. I really like the additonal power the ps4 offers but the controller is a major concern. When microsoft came out with the 360 it had reliability issues, microsoft instead of fixing the problem had consumers send there 360's in for repair. They would not admit they made a mistake with the design of the system and the so called repair was temporary for may consumers as it would just overheat again and you would experience the same red ring of death. My 360 broke 3 times which made me lose all faith in microsoft as a company. The decieved consumers instead of correcting the issue. I hope Sony learns from their mistakes. Dont send consumers the same flawed controllers, admit there was a production mistake and fix it!!! If you guys change the material and correct the issue please email me, if it is corrected I will be a playstation owner if not I guess I will have to go with microsoft. I would also love to see analog sticks with less resistance, closer to the xbox1 sticks.
Thanks for listening hope you take these comments into consideration.

Please share your suggestion on Sony PlayStation Community here. I'm sure they'd appreciate it. Thank you!
If my post answers your question, please mark it as "Accept as Solution".

Help in finding the material for the OCA exam

Hi Folks
Could someone help me finding some handy and free material for preparing for OCA examination....
Cheers

Oracle Documentation is the best free material for preparing for OCA Exam.

The system does not get Storage Location of the material from the Contract

Hi to all,
We are encountering a problem now regarding the PR to PO conversion. Our ABAPer has made a background job for the User to convert a PR to PO using ME59N.
Background Job : ZPTI_MM_PR_PO_CON
Program : RM06BB30
Tcode: ME59N
Variant : SAMPLE2_ME59N ( Plant, Vendor, POrg, Pgrp.)
Rule : When the PO is converted the STORAGE LOCATION of the material should be gotten from a CONTRACT/AGREEMENT instead of the SLoc defaulted in PR.
Problem: When the backround job is finished, the PO is converted but the STORAGE LOCATION did not get from the CONTRACT.
Steps done :
1. Create a Contract (ME31K)
    1.1 Specify the SLOC of the material
2. Create PR (ME51N) and enter the Contract Number inside the PR
    note : In the PR the material has a Storage Location which defaults from the Material Master.
3. Run SM36 and enter the job ZPTI_MM_PR_PO_CON
4. Set the job to "Immediately"
5. Click Steps icon and enter the program RM06BB30 and variant SAMPLE2_ME59N
6. Save
7. Go to SM37 and check the job if finished.
8. When the job is finished, check the PR if it has a PO.
9. Display the PO.
10. Check if the storage location in PO has gotten from the Contract
     The problem now appeared.
We have tried to use ME59N alone and not using the background job. The system has gotten the correct Storage Location, thus it got from the Contract.
Please help what should be checked on our side. Our ABaper is also currently debugging the program but we
are seeking help to fasten the solution.
Best Regards,
Elynne

Hi Elynne,
Definitively, it is a problem with ME59N background process.
It is better if you can create a message to SAP asking for the solution.
I only found the next SAP note:
Note 1287723 - ME59N in backgound does not populate PR details in PO.
But, I do not know if it will help to resolve your issue.
I hope this little information can help you in anyway.
Kind regards,
Sandra

Report for material documents with storage location

Hi gurus,
I would like to know if there is a report to display material documents but in the same screen display storage location from and storage location dest.
Thanks for your help.
Regards.

Hi,
You can use MB51 or MB59 with customised layout selection for your requirement.
With regards,
Ajay.

MD04 - Display the stock on one storage location particulary.

The transaction MD04 allows seeing the stock of the plant in the first line of the Stock/requirement list.(MD04)
When the plant includes several storage location (e.g MAG1, MAG2, MAG3), we don't have the detail of the quantity one each storage location.
We can use the filter (by using SETTINGS and FILTER ON) that controls the display of the MRP list and the stock/requirements list but this function don't allows seeing only the stock on one storage location particulary. We have to go the tcode MMBE in order to know the stock on each storage location.
Thanks in advance for yours reply.

What is your real problem?
Display the stock storage location-wise is one thing and do MRP without certain storage location(s) (=exclude storage locations from MRP) might be another.
If you only want to display stock of certain storage locations in MD04 but use all you stock for planning, I think there's no reason for it.
If you really want to exclude certain storage locations, then you have to be aware that MRP won't consider that stock (for the plant segment). It will also have impact on ATP (atp won't use that stock too).
So, there's a big difference between exclude a storage location from MRP and to exclude its stock from display.
(You can exclude storage locations from MRP via material master --> MRP4 view --> you have to enter both plant/sloc as organisational level and you will see the suitable tab. It is also possible to control this indicator via config for to be created material masters - you can search and find threads)
You should describe your exact requirement and maybe forum mebers can give you advice.

I get the icon for "The song can't be located

I get the icon for "The song can’t be located; it may have been moved or delete" but it is there and if I play it it does play. However, it will not sync. I have thousands of songs in iTunes and this appears on many of them. Is there a quicker way of clearing the icon other than playing each track?

That icon does indeed mean that the file cannot be located (I just needed to confirm this, to avoid future confusion).
When you start iTunes, any external storage locations need to be ready to read and have the same drive letter associated with the drive as it did when you added the songs to your iTunes Library. If these conditions are not met, then iTunes will be unable to find the file.
In addition, if the file has been renamed, moved (but still on the same drive) or even deleted, by you, or any other programme, then once again, your iTunes will not be able to find the file, hence the exclamation mark.
I'm no experrt on NAS storage, but essentially, the file path to the song's file must remain constant. iTunes looks for the files as soon as it starts up.
If all your Librayr is external to the computer, you could try re-linking the whole Library to iTunes. Alternatively, I think it's going to be one at a time.

To stock transfer the RM to Production storage Location

Dear All,
I want to stock transfer the RM from Store to production storage location after that I have to pick the material against Production Order from Production Storage Location.
How I can carry out this scenario.
I am trying through Pull list.
please give ur valuable inputs.
Thanks in advance
Vijay Mankar.

Hi Vijay,
To tranfer the stock from store to Prod storage location , u can do in two ways,
1.Pull list - By accesing the Pullist with the production order .if there is no enough stock to meet production qty at production storage location , system calculate the missing part and asks replenishment storage location. here u have to give your store as repl.storage location
2. Enter tranfer posting.( MB1B) - using this u can tranfer the stock dierctly from the store to prodution storage location. u have to use 311 Mvt type and define Rec storage location is store.
3. Enter good issue MB1A - u can pick the raw material with reference to your prodution order using 261 Movement Type.
please reward if it helps
regards
pradeep

Split the Delivery based on Storage location

HI all,
How to Split the Delivery based on Storage location when creating delivery. is there any functional setting ?
Thanks
Krupali

Hi KR and Lakshmipathi,
I am having exactly the same requirement. My requirement is that i need to split one Sale Order line into multiple line items in delivery based on the stock in a particular storage location at the time of delivery creation.
Eg.
Line item 10 in Sale order for quantity 100.
Storage location stock in the priority
ST01 = 40
ST02 = 25
ST03 = 2000
I wish to have 3 line items in delivery like
Line item           Storage Location             Qty
10                     ST01                                40
20                     ST02                                25
30                     ST03                                35
I was able to do the same in the BADI LE_SHP_DELIVERY_PROC ~ SAVE_DOCUMENT_PREPARE
But i am facing problems regarding the inconsistency in delivery document such as Picking status update etc
Suggest if there is any better method to do.
Thanks in advance.

Extend the material for the storage location in mass.

Similar Messages

Maybe you are looking for