Extend wireless network and use dns server

I need to extend a wirelss network with my Airport express
but I also need to the devices connected to Airport express to use specified DNS servers.
Even if primary and secondary DNS fields are filled it does not seem to work and devices are not using them
Is there anyone who knows how to "force" connected devices to use the DNS services?
thank you!!!

I need to extend a wirelss network with my Airport express
The AirPort Express can only extend a wireless network if that network is provided by another Apple router.
So, the first question here would be what device is providing your wireless network?
Assuming that the Express is extending the network from another Apple router correctly, it is possible to manually enter DNS addresses for the Express to use, but it is not possible to "force" a wireless device to use the Express for its connection.

Similar Messages

Wired airport express to extend wireless network and connect network printer?

Is it possible to configure and connect an Airport Express via ethernet cable to an Airport Extreme base station in order to extend wireless network AND connect a network printer to it? Here's the deal...The Airport Extreme is directly connected to my DSL modem and the wireless network is working fine in my house, but, the signal does not reach my detached studio/office. I have a Cat5e cable (and phone line, more on this later) run between the two locations and trimmed out. I would like to have wireless access and connect my network printer (Brother HL-2170W, wireless or wired) in my studio, be able to use printer from house also, and still have wireless access in house.
So, ethernet connection from Extreme to Express, USB from Express to Printer, wireless access for all users. Can anyone talk me through how to (re)configure the Express to do this? Do I need to make changes to Extreme configuration also?
JS

Is it possible to configure and connect an Airport Express via ethernet cable to an Airport Extreme base station in order to extend wireless network AND connect a network printer to it?
Yes. Apple's instructions for this are here:
http://support.apple.com/kb/HT4260
Instead of a second AirPort Extreme as illustrated, you will be using the AirPort Express.

OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?

OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?

Just want to confirm that I am also having this issue, The connection is fine, and it is in fact charging (@ 100%)
Everything Rick has said is like an echo to what is happening to me.
I have tried re-installing iTunes, and restarting the Bonjour service, sadly there is no change.
earlier before i updated iTunes it recognised my iPod but said that I had to update iTunes in order for it to work.
So i updated iTunes but now it's not even showing the device anywhere.
In case this helps:
OS: Windows 8.1
iTunes version: 11.3.1.8
Device: 5th generation iPod touch 16GB with ios 7

Extending Wireless Network and Bridging Over Ethernet

Have a TimeCapsule and Airport Basestation at home. Both are currently connected over wireless using the "Extend Wireless Network" feature.
On each of the devices have several laptops, mac minis etc. connected over Ethernet (since wireless insufficient for our high speed data transfers etc.)... Trouble we are having is the speed/connection between both the TC and the AP, so considering to connect them both over Ethernet to improve.
Question is once they are connected over Ethernet, what happens to the "Extend Wireless Network", how does the TC and AP know to either use the wireless or the Ethernet to connect with each other? Does one take precedence over the other?
We want to keep them both on Ethernet and Wireless bridge ideally, so that at opposite ends the wireless network is extended for our iPhones and iPads and all devices connected on Ethernet benefit the speed boost over Ethernet, but just not sure how it will behave, and not sure how to test this scenario....
So asking here instead
Thanks!

It sounds like you might want to configure your base stations into a "roaming network".

Currently have house wide wireless network and using external HD (USB) for time machine. HD broken. would Time capsule work with current routers etc or make them redundant?

I currently have a large house wide wireless network and I am using a dedicated Buffalo HD with USB for time machine. The HD has gone bad and can't be repaired. I am thinking of replacing it with a Time Capsule. Will this fit in with my current routers etc, render them redundent ? I THOUGHT THAT THE HD I BOUGHT WAS OF GOOD QUAILTY BUT IT HAS BROKEN AFTER 2 YEARS. HOW LONG CAN ONE HOPE FOR A TIME CAPSULE TO LIVE (USING QUALITY SURGE DEVICES ETC) ? Does one need to backup the backups?
ALSO: Is ther e any way to back up from Time Machine off site ( mobile me etc) in case the house burns down?

Steve M. wrote:
I know I should have redundant backups and should probably have a second external HD and eventually will.
Yes, that's best.
But for now, if I partition (I'm assuming I should) a new 1 TB external HD, how big should I make the TM partition vs. the SD partition at this point assuming I have under 100 GB on my internal Mac HD? Is this a feasible way of doing things here in the near term.
Your best bet is to make your TM partition 2-3 times the size of the amount of data you anticipate backing-up. Put it first on the drive; that way, later on you can delete the partition below it, expand the TM partition, and make a new, smaller partition for SD (or use the whole drive). See #1, #3, #5 and #6 in the Frequently Asked Questions *User Tip,* also at the top of this forum, for details.
By the way, any recommendations on which peripheral HDs to consider? I was very surprised on a recent visit to my local Apple Store that they have a large stock of WD My Studio drives. I mentioned to an Apple sales person that I had always heard WDs were kind of a no-no among Mac users but she assured me the current crop of them were much improved. Any comment on that??
Most any drive will work with Macs, and Time Machine.
If you're going to put a "bootable clone" on it, be sure it's a bootable drive. Most PPC Macs can boot only from FireWire; most Intels can boot from F/W or USB. But some Western Digitals won't boot a Mac. Their list of which ones should and +should not+ boot: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1787. But note the disclaimer that they don't support it +*at all.+*.
In addition, many of them have a built-in sleep mode that cannot be disabled, and sometimes interferes with Time Machine backups: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1376

Wireless network printer using print server

I have a USB HP LaserJet 3015 printer connected to a print server, Level One FPS-3003 and then connected using RJ-45 LAN cable to my wired/wireless LAN switch router. It works correctly with all my Windows XP and Vista pcs on the LAN wirely or wirelessly.
I recently bought MBA and configured it to connect the printer wirelessly. Before that, I connected the printer directly onto the MBA and it works like a charm. Once I complete the setup and I tried to print a page from Word Mac 2008. It failed. The print job showed that the Printer Paused and job status was stopped. I tried to click the button of Resume Printer and the printer became Printer Ready but the print job status remained Stopped. I clicked Resume button (Resume printing of selected jobs) and the printer changed to Printer Paused.
It appears to me that the print server does not like Leopard. I look at the print server menu and the OS requirements are stated Windows 98 SE/ME/2000/XP/2003 and HP-UX, Unix, Linux and RFC-1179 LPD System. Is there any workaround to make it work with Leopard. Thanks!!

Usually you'll find all the info you need listed under unix or linux (print server manual). Oh, but I see the manual is for Windows only.
The easiest printer setup will be to plug the printer into USB port 1 and use IP Printing > HP Jetdirect protocol. No Queue name. Refer to manual page 50 - TCP/IP port 9100 equals HP Jetdirect protocol.
For scanning, you can try the TWAIN-SANE drivers:
http://www.ellert.se/twain-sane/

The Difference between Extending a Wireless network and WDS?

I have an Extreme (n) and an Express (n).
I want to make sure the signal is strong upstairs and share a printer (connected to the express) and use AirTunes. I also may add an external drive to the Extreme.
What's the difference between Extending a Wireless Network and using WDS? Will there be a speed difference?
Message was edited by: J. Christopher Edwards

I think you don't get it
If I have another draft N router that operates at 2.4G and I have only n devices I can still use WDS and it will connect using draft n in the 2.4G band.
If one g device connects to the network will go in mixed mode.
The AEBS will still report 130 Mbps for your n clients and 54 for your g clients.
If the other router is g only obviously you can't connect between the two router at n mode but still the AEBS will be in mixed mode and not in g. The Extreme will still report 130 Mbps for the connected n clients.
I can tell you that because I have actually implemented it am not taking off the documentation.
The same device if I try to use the "extend n network" does not even see the AEBS but will happily keep the n in the WDS mode and though the bandwidth is halved it is still more than g.
In any case enough for this!

Extending wireless network via ethernet

Hi all: I have a first gen Airport Extreme and an Airport Express. I am having a hard time getting my wifi network extended via the Airport Express. My goal to to have an extended wifi network with the source data delievered to the Airport Express via ethernet and then broadcasted, not repeating teh wifi signal from the Airport Extreme. The two devises are seperated by several walls which does not allow the wifi signal to propogate between them.
I can see both devices via our ethernet wiring (I turn off wifi on my laptop and plug into the network). The Airport Express is connected to directly to one of the Airport Extreme ethernet ports (and not the WAN port). I then setup the Airport Extreme first and test it - that works fine. Then I move over to the Airport Express and set it up to extend the wireless network. This seems to work fine too. But when I move the Express to its final location and hook it up to our wired network, it fails to broadcast.
I hope my description makes sense. Is my goal possible? Thanks, Chris.

Then I move over to the Airport Express and set it up to extend the wireless network. This seems to work fine too. But when I move the Express to its final location and hook it up to our wired network, it fails to broadcast.
You have the basis for a "roaming" type network. In this case the AirPort Express needs to be configured both as a bridge and to "create a wireless network," not to extend it. The "extend" feature was designed only for when you want the connection between base stations to be wireless. A bit confusing as a roaming network does indeed "extend" the wireless network and uses the same Network Name.

I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network. I select Extend Wireless network but have no success. Ideas?

I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal. The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available. I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play. I got the plug, but no play. I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status. I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times. Then wait 45 seconds and the default settings will return. I did all that, only to find out that after the initial flash of green, green never appeared again. I got a fast flashing yellow light, followed by the light going off. Apparently this didn't reset it properly. So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
highFly376

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

How do I know "Roaming Network" is working with Airport Express and Airport Extreme and should I use extended wireless network for third Express?

Attempting to eliminate a dead spot in Wifi coverage [and implement AirPlay] have one Airport Extreme 802.11n and two Airport Express 802.11n's.
http://support.apple.com/kb/HT4145
The Airport Extreme is of course connected to cable modem and Ethernet switch, and one Airport Express is connected to the Ethernet network. As per instructions for creating a "Roaming Network", Airport Express is set to same SSID, security type, and Password.
Questions:
1. How does the client device know which Airport to connect to? In other words, will it switch to the closer WiFi transmitter automatically? The WiFi reception problem is intermittent in the fringe areas so what I do not want it for it to stick with the more distant Airport Extreme in the basement when the Airport Express which is closer will work better.
2. How can I tell which of the Airports the attached client device is using?
The third Airport Express will be in a third location - I was planning on using it also for expanding coverage but after reading the warnings about performance suffering when purely using WiFi for the expansion in this location ("Wireless Extended Network" without an ethernet connection) I have figured that the single wired Airport Express will be adequate and will use the third Express to do Airplay only.
http://support.apple.com/kb/HT4259
Question: Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
Mitch

1. How does the client device know which Airport to connect to?
The Mac computer will automatically connect to the wireless access point with the strongest signal...which is probably the closest AirPort. An iPhone or iPad may not do this and will tend to stay connected to one AirPort.
2. How can I tell which of the Airports the attached client device is using?
On a Mac, open Macintosh HD > Applications > Utilities > AirPort Utility. Click on one of AirPorts. In the area to the right, locate the AirPort ID and jot that down. Then do the same for your other AirPort.
Move your Mac near one of the AirPorts and log on to the wireless. Hold down the option key on the Mac while you click the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device to which you are connected.
If you are close to the "remote" AirPort, and you see the AIrPort ID of the "main" router when you are testing, then you know that the network is not configured correctly.
Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
There will be a modest 10-15% bandwidth loss with the "extend" setup, assuming that the Express is located where it can receive a strong wireless signal from the AirPort to which it is associated. You can avoid the bandwidth loss if the Express is also connected via Ethernet as part of the roaming configuration.

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
Airport gets it address DHCP.

Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
Note that the Express will not provide any additional wireless coverage when it "Joins".

Troubling extending wireless network with Time Capsule and Airport Extreme

I am trying to set up and extend a wireless network in my house, but it’s not working right. I have two Airport/Capsule units in the house:
2TB Time Capsule (Dual-Band II)
1 Airport Extreme (Dual Band)
I have the Verizon Fios router as my gateway to the internet, and also as my DHCP server. I have also tested the ethernet ports in my house to verify that they work, and that I can get a DHCP-issued IP address.
Now, my Verizon router has WiFI, and it’s still on. I am not using it though except to troubleshoot. So far as I understand, this should not cause a problem.
Base station setup
So I setup the TC to Create A New Wireless Network, on the ethernet network it’s on (Dlink switch plugged into Verizon router). I set it up in Bridge Mode (as opposed to having it dole out IPs, since the Verizon router does this already). The TC gets a valid IP, and my wireless device connect to it without a problem. I have checked “Allow this network to be expanded” under Wireless settings.
Extended station setup
The AE Dual-Band is plugged into the Ethernet, and is reset to Factory Settings. I name it “Airport Extreme 2” and I chose “I want Airport Extreme to join my current network.” The other two options are: “I want to create a new wireless network” and “I want to replace and existing base station or wireless router with Airport Extreme.”
I chose to “join,” I select “I want to connect Airport Extreme to my network using Ethernet to extend my existing wireless network.” The other options are to disable wireless entirely, or to “wirelessly join my current network.” On the next page it asks me to select the device or network that the Airport Extreme will connect to using the Ethernet. I set it to the Time Capsule.
Results:
Access near the Airport Extreme 2 is incredibly slow. Speedtest shows I am getting less than 1Mbps. Worse yet, my mail client won’t connect. It just times out.
What I had hoped was that the AE would connect via Ethernet to the network, and just bring the wireless network to the other side of the house. Instead it almost seems as though it is just re-amplifying the TC’s signal. Otherwise, why is performance so bad?
Thanks to anyone with some insight here!

Hello Kennuff. Welcome to the Apple Discussions!
Since you have the ability to connect all of the routers by Ethernet, there is no need to configure the Time Capsule (TC) & 802.11n AirPort Extreme Base Station (AEBSn) for a dynamic WDS (aka, extending a network). This option is only when the routers do NOT have an Ethernet connection between them.
Instead, you want to configure the TC & AEBSn in a "roaming" network. I suggest starting by performing either a "hard" or "factory default" reset on both.
Next be sure that both the TC & AEBSn are on the same Ethernet subnet coming from the Verizon-supplied router.
Configure the TC & AEBSn as follows:
AirPort Utility > Select the TC or AEBSn > Manual Setup > AirPort > Wireless
o Wireless Mode = Create a wireless network
o Allow this network to be extended: <not checked>
o Radio Mode: <leave the default or if you require a specific mode make sure both routers are configured the same>
o Wireless Security: <configure both routers the same>
AirPort Utility > Select the TC or AEBSn > Manual Setup > Internet > Internet Connection
o Connection Sharing = Off (Bridge Mode)

Can an AEBS extend a wireless network and provide 3 LAN ports?

I have just reorganised my wireless network by replacing an AEBS GigE (MC053B/A) {AEBS1} with an AEBS Sim Dual-Band II (MC340B/A) {AEBS2}. Whereas before I used an AE G {AE1} to provide a dedicated G wireless network and bridged it via LAN to AESB1, which was configured for 5GHz N only, the new setup is all taken care by AEBS2.
The setup is basically this:
AEBS2:
- Internet gateway with shared IP from the cable modem.
- all client wireless connections are made to AEBS2, no other base station will accept client wi-fi.
- provides separate 5GHz N and 2.4GHz B/G networks with WPA2 authentication
- performs all DHCP assignment
- uses MAC address access control
- allows networks to be extended
AE1:
- set to 'join' the G network for AirTunes
*AE N* {AE2} :
- set to extend N network but no wireless clients: this enables the LAN port to be used to connect to my FreeSat HD TV's ethernet port, for upcoming BBC iPlayer support.
*Wi-Fi clients:*
- Various client devices all connect via N or G to AEBS2
This all works just fine.
The problem I have is with AEBS1. I have a Mac Min Core Duo that only has G wireless. I would like to configure AEBS1 to extend the N network so that its LAN ports can be used by the Mac Mini (and turn off the Mini's wi-fi). The idea is similar to what I've done with AE2: no wireless clients, just LAN.
I've restored AEBS1 to default settings and then configured it to 'extend' the N network with no wireless clients.
While testing I find that AEBS1 connects to the N network but only for 70 seconds, it then disconnects for 31 seconds, after which it reconnects. This cycle is predictable and I've monitored it from an iMac PINGing AEBS1's wireless IP address while following the ethernet (en0) status in the Console app on a LAN attached MacBook.
The MacBook gets its DHCP assigned IP address from AEBS2 when AEBS1's connection is up, but the IP address is dropped as soon as AEBS1 drops the connection.
The MacBook quite happily connects when I tested it using AE2's LAN port.
So either AEBS1 has a problem, or AEBS2, or both.
Has anyone else experienced something like this?

Thanks Bob. I've read extensively here of the limits of 5GHz, but I've not experienced these as my house doesn't have solid (concrete) floors or (many brick) walls. I also have the main WiFi point upstairs and I've put AEBS2 upside down on its 'head' near the floor.
I'm able to get good Wi-Fi throughout the house on both N and G. The Apple TV, which is under the TV and near AE2 gets good N connectivity. Mainly, the worse WiFi device is the Mac Mini and it always has been.
Since AE2 can join/extend the 5GHz N network and it is downstairs, I think there is some problem with with how AEBS1 tries to extend 5GHz N networks. BTW AEBS1 is on my desk and AEBS2 is under the desk about 1m away.
For the moment I've set AEBS2 to "802.11n only (5 GHz) - 802.11b/g/n" and have AEBS1 set to extend the 2.4GHz b/g/n network. At least the Mac Mini will get 2.4GHz N some of the time and more consistent connectivity all of the time.

Extending wireless network for better signal use with apple tv receiver

I been doing some research regarding the apple extreme as well as the apple express products to extend my network and make it work better with an apple iTV that I want to send photos and slidesshows via airplay.
I have a 2nd generation extreme setup as my main wireless network. I also setup one 1st generation extreme as well as one express units to extend the range and signal strength.
When I setup my iTV I see the signal extreme to just three (3) bars without the additonal units powered on. When I power and configure the other two units to extend the network, I do not see any difference in signal strenght in my iTV. Thus when I am sending info to the iTV, the music and slide show are rerky and erratic. not smooth at all.
I setup the 1st generation extreme as it's own separate network (without access to the internet) and then instructed the iTV to connect to it. It did so and I was able to display movies and slide shows perfectly. The signal strength was high. (unit was only a couple of feet away).
So, I am not sure how come the signal strenght is not affected by the use of my extreme as an extender. Can you provide some light on this?
Thank you.

Hi John,
Thank you. That explains a lot! I'll see what I can do about upgrading my extreme and/or express to a newer unit and then see if indeed the issue is solved.
BTW, I changed the channel to 40 vs automatic and I saw an increase in signal strength as viewed by the apple tv unit, but it did not changed the performance of my airplay stream from my macbook pro to the apple tv unit.

How can I use an Airport Express to join my wireless network and provide an internet signal to my Power Mac g5 via an ethernet cable?

I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable.
I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal.
This via an ethernet cable that is plugged into the airport express and then into the ethernet port on the g5.
Please advise as I have configured the airport express in every way possible, the green light is on and when I plug the ethernet cable into the G5 my network cofigurations shows nothing and says that the ethernet cable is not plugged in (It is).
I get an internet signal if the ethernet cable is plugged directly into my wireless router, so the ethernet port works.
Please assist. Thanks.

Two requirements that must be met to do what you want.......
1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
The box to "Allow Ethernet Clients" must be checked
Please check to verify that your AirPort Express meets both requirements

Extend wireless network and use dns server

Similar Messages

Maybe you are looking for