Extended Accounting - Configuration info

Hi all,
My understanding is that the file '/etc/acctadm.conf' is created / changed, whenever extended accounting is enabled / changed. I noticed that this file is not getting created when extended accounting is enabled.
Also is there a function which would return the extended accounting configuration information like providing information that /usr/sbin/acctadm prints out.
Thanks
Edited by: 849028 on Mar 31, 2011 12:41 PM

Here are the specs and factory configurable options for the HP ENVY 700-200z CTO Desktop Computer you are interesrted in. Based on the specs, this model uses an HP JasmineR MS-7778 motherboard. The JasmineR motherboard supports an optical S/PDIF output, as shown below;
2 - Optical S/PDIF-out port
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

G/L account configuration about GR of PO about the third purshase process

Hi Guys,
I am not clear about the G/L account configuration when do the GR of PO. ( PO is converted from PR which is created automatically when the SO is saved). The account assignment category is 'E' (The acct modification is VAY,consumption posting is 'E', special stock is 'E', It is the same with the IDES system setup). But when I test the similiar case in our system and IDES syste,when I do the GR for the POs,I found that in our system, the Debit is posted to inventory account (The G/L setup in OBYC BSX),but in IDES,it is posted to consumption account (The G/L setup in OBYC GBB VAY). As I understand, If the PO is created with account assignment category, it should be posted to the G/L account which is setup in OBYC GBB,not the inventory account. Appreciate that anybody can tell me why they are different for the similiar cases?
Thanks in advance!

Hi,
Can you please refer to SAP note 458270, and check whether the material is valuated or non-valuated?
For account assignment E, with special stock E, you need to check EKPO-KZBWS to identify
whether it is valuated or not. If EKPO-KZBWS is initial, the posting will be non-valuated, thus GBB account will be used.
Note 458270
The system response is correct. In the case of valuated customer sales
order stock, a material stock account is determined. Here, the data is
derived via transaction/event key BSX. In the case of unvaluated
customer sales order stock, on the other hand, a G/L account is
determined by means of transaction/event key GBB.
Hope it helps.
Thanks and regards,
Polly

Group Account Configuration - OBIA 11.1.1.7.1

Hello,
I am setting up Financial Analytics OBIA 11.1.1.7.1, have following questions regarding group account code setup
1. Should we always use Natural Account Segment for mapping to Group Account Codes? I could see a customer is using different segment (Sub Account) to classify their accounts to various categories. Should we use combination of Natural Account and Sub Account to classify them in to various Oracle supplied group account numbers?
2.If i have to go with multiple segments for group account configuration, i could n't see a technical note from oracle support for OBIA 11.1.1.7.1 where ETL tool is ODI. Can we customize ODI using the technote available for Informatica based OBIA 7964 tech note? Are there any changes to apply on top of it?
Thanks
Venkat G

Hi,
Thanks for reply. We've multiple COAs(Three Companies with seperate COA) Also with in one COA natural Account is dependend on Sub GL Segment and Cost Center. In "file_group_acct_codes_ora" file we only map Natural Accounts.Now if we map only Natural Accounts to Group Account Number it will pull all data. e.g. Natural Account 123,Cost Center A and Sub GL Account 1 should be mapped to Cash. if we map 123 to Cash it will pull all data for all Sub GL Accounts and Cost Centers. Please let me know if you need more clarification.
Regards
mzai

C# - How to get the name of account (i have 3 accounts configured at Outlook) when I receive an email?

At my Outlook 2013 I have 3 different accounts configured (two personal and 1 professional). When I receive an email at real time I need to know which account the mail is addressed, because I only want to work with the professional account!
I use outlook.NewMailEx += new Microsoft.Office.Interop.Outlook.ApplicationEvents_11_NewMailExEventHandler(olApp_NewMailEx); It is ok to get body, sender, subject
but I cannot find the account name ! Example - my customer
[email protected] sends one email for my account
[email protected], and a friend sends an email to my personal account
[email protected] At my application I want only to process the [email protected] and I cannot discover this account name on the mail received! thks

Here is my code and what is strange, there are incoming mails (I see them at upper corner and at inboxes) with zero recipients, giving me the message below. So I will give up and change ,at Outlook accounts configuration ",display names"
to the valid address names (ie Instead Manuel Costa I will put
[email protected]), so I can use the mail.To property!
private string GetSenderSMTPAddress(Outlook.MailItem mail)
               string smtpAddress = "";
               if (mail.Recipients.Count > 0)
                   string teste = OlMailRecipientType.olTo.ToString();
                   foreach (Outlook.Recipient recip in mail.Recipients)
                       Outlook.AddressEntry entry = recip.AddressEntry;
                       if (entry.Type == "EX")
                           smtpAddress = GetSMTPAddressViaOutlookObjectModel(entry);
                   return smtpAddress;
               else
                   MessageBox.Show("no recipients");
                   return "";
Thanks anyway Eugene

How can I edit external e-mails accounts configurations I had on Mobile Me mail and now on iCloud?

how can I edit external e-mails accounts configurations I had on Mobile Me mail and now are
on iCloud?

Thanks for the answer, but the external POP accounts I had in my MobileMe are working in my iCloud! I receive all the e-mails that are directed to those POP accounts, in my iCloud e-mail, since I migrated from Mobileme to iCloud. So, iCloud accepts external accounts, but i doesn't allow us to edit new configurations or to send e-mails using Pop Accounts through it. Very weird. Does anybody have a solution?

About extended accounting

Hi all! I'm experimenting the usage of extended accounting mechanism at task level. Somebody of you could you tell me the meaning of the following fields? I've just found a list in the documentation without explanation. The fields are:
EXD_TASK_MESSAGES_SND
EXD_TASK_MESSAGES_RCV
EXD_TASK_BLOCKS_IN
EXD_TASK_BLOCKS_OUT
EXD_TASK_CHARS_RDWR (disk transferred bytes?)
EXD_TASK_CONTEXT_VOL
EXD_TASK_CONTEXT_INV
EXD_TASK_SIGNALS
EXD_TASK_SWAPS
EXD_TASK_SYSCALLS
EXD_TASK_ANCTASKID
Thanks!

Hi,
typical process would be an
internal order
purchase order (with IO assignment)
place order
receive goods (GRIR)
create AUC (WIP assets)
settle IO to AUC (KO88 or KO8G)
complete AUC purchase
settle AUC to Asset (AIBU/AIAB)
post depreciation
Rgds.

Looking for Account Receivable, Account payable info cube

i m looking for Account Receivable, Account payable info cube in business contnet.
i search a lot on help.sap.com but could not find them.

Hi,
Please check the link below for AP and AR business ontent:
http://help.sap.com/saphelp_nw2004s/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
Thanks and Regards
Subray Hegde

Coherence *Extend-TCP configuration not working

Hi,
     I was trying to setup the Coherence *Extend-TCP configuration on my solaris box.
     To start with, i'm trying to start a Cache server instance by using the cluster-side configuration XML (given at URL below)
     http://wiki.tangosol.com/display/COH32UG/Configuring+and+Using+Coherence*Extend
     But while starting its throwing me the below error. The Coherence version that i'm using is 3.2/353. Please advise.
     Exception in thread "main" java.lang.IllegalArgumentException: The "Proxy" element is missing a required acceptor configuration element
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.ProxyService.configure(ProxyService.CDB:30)
     at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:5)
     at com.tangosol.coherence.component.util.SafeService.getRunningService(SafeService.CDB:26)
     at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:1)
     at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:9)
     at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:775)
     at com.tangosol.net.DefaultCacheServer.start(DefaultCacheServer.java:138)
     at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:60)
     regards
     Mike

Sorry,
     I noticed that the above error occurs for version 3.1.1 (& not for 3.2) as previously
     specified in previous message (above). My apologies.
     As a follow-up, i've now installed 3.2 jars on my environment & i noticed that the
     above error doesnt occur for this version. The cache server seems to be coming
     up fine now (with the appropriate TCP/IP configuration tag in the xml).
     But when i try to run my client application (which attempts to connect to this
     remote cache server), it throws an InvocationTargetException error (full exception
     below).
     The error indicates that i'm missing some elements in the XML configuration.
     Exception
     (Wrapped) java.lang.reflect.InvocationTargetException
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
          at java.lang.reflect.Method.invoke(Unknown Source)
          at com.tangosol.net.extend.AdapterFactory.ensureCacheServiceAdapter(AdapterFactory.java:69)
          at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:729)
          at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:650)
          at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:831)
          at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:284)
          at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:622)
          at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:600)
          at com.tangosol.examples.explore.SimpleCacheClient.main(SimpleCacheClient.java:25)
     Caused by: java.lang.IllegalArgumentException: Missing required initiator child configuration element: <extend-cache-scheme tier='front'>
     <scheme-name>extend-direct</scheme-name>
     <service-name>ExtendTcpCacheService</service-name>
     <initiator-config tier='front'>
     <tcp-initiator>
     <remote-addresses>
     <socket-address>
     <address>gpblnx1d.nam.nsroot.net</address>
     <port>32000</port>
     </socket-address>
     </remote-addresses>
     <connect-timeout>10s</connect-timeout>
     <request-timeout>5s</request-timeout>
     </tcp-initiator>
     </initiator-config>
     </extend-cache-scheme>
          at com.tangosol.coherence.extend.component.comm.Adapter.getInitiatorElement(Adapter.CDB:13)
          at com.tangosol.coherence.extend.component.comm.adapter.CacheServiceStub.configure(CacheServiceStub.CDB:5)
          at com.tangosol.coherence.extend.component.application.library.generic.CoherenceExtend.createCacheServiceStub(CoherenceExtend.CDB:4)
          at com.tangosol.coherence.extend.component.application.library.generic.CoherenceExtend.ensureCacheServiceStub(CoherenceExtend.CDB:15)

[SOLVED] Clonning window in extended desktop configuration

Hello,
Does anyone know whether it is possible to clone a window in a extended desktop configuration running two monitors?
I would like something like cloning the displays, but not for the entire screen, just for the windows that I want.
Something like I did on this poorly made image
Here is some link that I found, but I think that this doesn't cover this:
http://jonblack.org/2013/06/02/the-stat … r-support/
Sincerely
Last edited by gbc921 (2013-11-01 17:52:58)

I made a little script to automate this process.
So one can just run it, select the window with the mouse and the vnc viewer pops out!
http://pastebin.com/9H1ESz9q
Feel free to say something!
Thanks!

Channel Order from FP Get Configuration Info.vi

Why does the get server list function of this VI return the Channels in alphabetical order instead of physical channel order 0,1,2...? The channels are also sorted in FieldPoint Explorer in this way.

Looking at my FieldPoint data (8 temp sensor channels), the FP Advise (item name = all) is retrieving the data in channel order (0, 1, 2, ...), but the labels are returned by FP Get Configuration Info.vi in some version of alphabetical order (taN preceeds taBot, so it doesn't seem to be quite alphabetical.) Is the only way I can relate item labels to retrieved data is by creating a tag for each individually and FP Reading each individually?

Invalid Directory in mail account configuration

In Mac Mail, I have 4 accounts configured. One each from Yahoo, MSN, Comcast and Mobile Me. In the advanced tab of accounts, there is the box that you can uncheck to leave a copy of incoming mail on the server. But when I try to do that with the Comcast account, I get -------------
"Invalid Directory", and then an error blurb that says the path is laready in use by the Yahoo account. The settings for the Yahoo account show that it is using a yahoo server for the outgoing mail. I also have no problem with that setting in the other two accounts---only the Comcast one.
What am I missing?

sorted.!
See e-mail re SSLs.

I get the following error message when I try to receive e-mail in this hotmail account: "Configuration could not be verified – is the user name or password wron

I have tried to add a hotmail account to Thunderbird because my Internet provider will stop e-mail support in the near future. I was able to add a hotmail account to Thunderbird, but I get the following error message when I try to receive e-mail in this hotmail account: "Configuration could not be verified – is the user name or password wrong?" (The hotmail website receives the e-mail.) User name and password is certainly correct. I have a 8.1 OS. Thank you.

got an anti virus that thinks it should scan email. Turn that function off.
Have a firewall, check that Thunderbird has full internet access, not some Auto rubbish that somehow fails.

Why does the"FP Get Configuration Info.vi" only return alphabetically?

"FP Get Configuration Info.vi" only return arrays arranged alphabetically? Can I get the iak file info in position/address order?

The only way to do it is by using the Array tools in LabVIEW.

Joiint venture accounting configuration document

Hi All,
I need joint venture accounting configuration document. If any one of you have please share with me.
Thanks in advance...
regards,
Vipin

Dear all,
I am also searching for the config guides for JVA. JVA has already been activated in our system, but the blank configuration made us so confused about what we should do. I have 2 scenarios:
- Scenario 1: 2 companies form a joint venture (each party accounts for 50%), our client wants to record the venture's transactions in SAP system.
- Scenario 2: 2 companies sign a business cooperation contract, our client is responsible for recording all expenses and revenue and then allocate the profit to the other party.
Could you give me any config docs or any links to SAP config guides? Your help would be much more appreciated.
Regards,
Yen

Extended functions of Info Sets

Hi Experts,
what are Extended functions of Info Sets .....Could you plz explain me.
Regards
Venkat

hi,
we use cubes also in an infoset like as data store object.
SAP does not generally support more than two InfoCubes in an InfoSet. If you include more than two InfoCubes in an InfoSet, the system produces a warning. There are several reasons for this limitation
see this link u get more information for infoset.
http://help.sap.com/saphelp_nw70/helpdata/EN/42/ca6a69992f6bb1e10000000a1553f6/frameset.htm
hope its help to u.
plz assign points if its solve your query.
thanks,
suresh.
Edited by: sureshkumar gedela on Feb 25, 2008 12:03 PM

Extended Accounting - Configuration info

Similar Messages

Maybe you are looking for