Extended cable between Soundcard and X-Fi-E/A-Modul

Hi all!
I have no more free 5 /4 Slot on my computer and so i want to put the E/A-Modul on my desk. Does anybody know, if there is a longer (extended) connector cable between the soundcard and the E/A-Box available?
(Creative Sound Blaster X-Fi Titanium - Fatalty Champion Series )
For sure, i could solder some cable between both connectors, but if there is any extension available i would like to use it...
Does anybody know the type and/or specification of the connectors itself? I could manufacture a cable if i would know the specific name/brand.
Greets,
Marc

Re: Extended cable between Soundcard and X-Fi-E/A-Modul_ Hi Dirk...
It seem's you are German, so i wil try to answer your question in German :-)
Ich hab jetzt di'verse H?ndler und Internetforen durch und bin der Meinung, dass es dieses Kabel?nicht als "Ersatzteil" gibt. Einer der H?ndler hat sofort abgewunken und gemeint :?"...das ist ein Herstellerkabel, das gibt's nicht einfach so und nachbestellen ist da erst Recht nicht..., aber der "B?rklin" m?sste den Stecker haben".
Ich werde mich also nun auf die?Stecker konzentrieren, zumal ich ja auch noch eine l?ngere Version haben m?chte. Entsprechende Kabel mit den n?tigen Kabelquerschnitten hat der B?rklin sicher. Die Stecker sind der Knackpunkt.
Leider fehlt mir ein wenig die Zeit um mich intensiv auf die Suche zu machen... so bald ich was neues wei?, sag ich bescheid.
Gr?e,
Marc
PS: Hier der Link zum B?rklin... leider ist die Suche etwas komplitziert auf derHomepage:
https://www.buerklin.com/

Similar Messages

Cable between hub and modem

Hi I had infinity installed yesterday. The engineer installed the hub & modem in my hallway. I explained that my existing setup comprised of 3 desktop computers in the loft and two laptops. From the main bt socket in the hall a cable runs up to the first floor. The engineer said he could fit the hub and modem on the first floor which I did not want as it was in a bedroom by the door. He installed the equipment and connected a laptop using the wireless connection @ 20mb explaining that I could hardwire my desktops if I wanted a faster speed. My question is: Would it be possible to replace (extend) the red etherent cable from the hub to the modem so that I could have the hub in the loft or will I have to run 3 seperate ethernet cables from the hub in the hallway up to the loft. Any help is appraciated Thank you in advance. (sorry I posted this in the wrong form yesterday)

i also had to use a longer ethernet cable from my PC to my hub,about 10ft which i bought on the net,i can give you the web address if needed for ethernet cables.
Q. There is smoke coming out of my open reach box... so can I have a new one.
A. Sorry sir, The fault is showing at the exchange so your box should be ok.
BRING BACK UK CALL CENTRES!!!!!

Can connect over wlan, but not using ethernet cable between mac and extreme

Hi, I have a brand new Airport Extreme base station. Wireless LAN works well and both my wife's and my Mac can connect to the internet. When I connect the ethernet cable to my macbook, it does not connect to Extreme. Is this a feature or a required change in the setups?
br
Vesa

vesaw, Welcome to the discussion area!
On your MacBook, open System Preferences-> Network preference pane and ensure that Ethernet is enabled.

HDMI CABLE BETWEEN LAPTOP AND TV WILL NOT WORK HELPPLEASE!!

I wanted to watch hockey from my laptop on the tv but i get nothing when i hook the cable. Is there something that has to be set or turned on??
I bought the computer about a year ago so it is not old. The computer is a; Dell Inspiron 1525 and the TV is a; Visio 42 inch
Any help will make me happy, Thank you, Mike {Removed per Forum Guidelines}

Majority of laptops are going to have a default setting of outputting video just to the display. You actually have to tell the laptop to display images out of the HDMI rather than it's screen. This is usually done by holding the "Function Key" down and cycling thru the video output options. The "function" or "fn" key can be located in the lower left hand portion of your keyboard next to the "ctrl" button your video options are typically worked in with your F1 - F12 bottons at the top of your keyboard. Your "FN" key will most likely be a different color than the rest of the keyboard hold this down while searching for your video output key (once again in you F1 - F12 keys) it will have a monitor logo that should be the same color as the "FN" key. Keep holding the "FN" key down and tap the video output key to cycle thru all the options until you find the right one.
.-**Click the star under my name if this information helped! TY!**-.
.-**Click the Solved button if this answered your question!**-.

Difference between Import and Export parameters in Function Module

Hi All,
I am unclear about the import and export parameters, when i create a function module. Can anyone explain abt this. However when i call the function module in any program the import parameters in Function module are displayed as exporting in program amd the export parameters as importing.
Any help on this would be appericiated.
Shejal.

HI,
Import parameter in FM is the value u provide to FM for processing.
export is the value u get from FM after processing.
when u call a FM in a progam the import parameter will appear as Export bcos u r giving value to the FM.
and u r getting value from FM in import parameter(bcos u r importing).
rgds,
latheesh
Message was edited by: Latheesh Kaduthara

Is there an easy way to switch mini dvi between monitor and tv?

I would like to be able to connect my mini's dvi output to a either a monitor or my tv. I am not trying to get a display on both simultaneously. With a DVI to DVI cable between mini and monitor and a dvi to hdmi cable between mini and tv I think that I can swap dvi connections at the mini, but that looks like a pain. Is there an easier way to do this?
I am about to order the dvi to hdmi cable. Is the mac mini's dvi port hot plugable or do I need to put the mini to sleep or shut down? Thanks,
Owen

Welcome to Apple Discussions!
Without some extra hardware, you can't. The mini, like all Macs, looks for data from the display to determine what settings it makes available to the user, so with two displays connected and feeding their available configurations, the mini will get very confused! Even if the two displays have one or more common settings that will actually work, each time the mini boots or wakes and detects the display, one or other (or both) are likely to go blank.
There are adaptors you might consider, such as those from Gefen, but they are not inexpensive. Have a look at http://www.gefen.com/kvm/dproductlisting.jsp?listingCategory=Switchers&productTy pe=dvi for a list of available switching options, though beware that for the most part, the need being met is for TWO sources and ONE display, not your ONE source and TWO displays.

IP Connectivity between 15252 and 15201

I have build a channel between 15252 and a 15201, with unprotected modules and clip with VLR. I have set datarate on clip as gbit_eth on the 15252 clip 23 and scu clip 23. I have connected2* 6513 with 1000LX-1300nm module to 15252 clip and 15201 clip. I can see the interface as" line up and protocol down". I have made use of MMF cable to connect to clips. I have no alarms on the MCU. Both MCU and SCU are on the same rack.
Back to Back IP connectivity with 2*6513 is working fine.
What is the possible reason for the interface showing as "line up protocol down".

The section 'Channel Installation in an ONS 15252 MCU' in the document titled 'Installation' should help. The URL is http://www.cisco.com/univercd/cc/td/doc/product/ong/15200/15200ist/200ist20/0020ist3.htm.

Difference Between BAPI and RFM

Dear Friends,
I have seen a few thread explaining the difference between BAPI and RFM(Remote-enabled function Modules) from functional point of view. I know that there are cases when both are available in BOR. Both can be implement using Object Oriented Technology.
Can any tell me how they differ from techincal point of view ? OR Are they same techinically ?
Thanks in advance,
Rajesh

hi,
Remote Function Call:
RFC is an SAP interface protocol.
Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
BAPI
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module
ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access.
Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects.
You create business objects and those are then registered in your BOR (Business Object Repository)
which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA.
In this case u only specify the business object and its method from external system
in BAPI there is no direct system call. while RFC are direct system call.
Some BAPIs provide basic functions and can be used for most SAP business object types.
These BAPIs should be implemented the same for all business object types.
Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs.
Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
Regards
Reshma

Basic question regarding Contract data exchange between CRM and ERP

Hi,
1) At a very general level, can somebody tell me via what technology are contract documents exchanged between CRM and ERP? IDocs, RFC modules or proxies?
2) Is it possible to sychronise changes in a contract, e.g. if the contract is changes in the ERP system, those changes are auotomatically updated in the CRM contract?
3) Can somebody point me to any documentation on this?
Kind Regards,
Tony.

contracts are exchanged between CRM ans ERP ssytem ny RFC and FM , you use object SALESCONTRACT for this,it is possible to synchronize changes between both the systems

Different between Passive and Active SFP+ cable

Hey,
We'd like to know what is the different between Cisco SFP+ copper passive twinax cable and active cable?
We test some Siemon passive SFP+ 7m and 10m copper cables and these cables passed our lab test ( link between nexus 5548 and FEX link).
Is that means we can using Siemon to take over Cisco because of same function and lower cost?
Thanks.

Greetings,
The following page explains in detail the difference between passive and active copper assemblies - http://www.scientificcomputing.com/High-speed-Copper-Interconnects-Address-Critical-HPCHurdles.aspx.
You can use any Cisco Twinax cables between a Nexus 5548 switch and Fabric Extender (note that Nexus 7000 switches do not support all Twinax cables). The 7 and 10m cables use an active design while the shorter cables are passive.
Non-Cisco transceivers are not compatability validated and may not be supported by TAC if you encounter any issues (Warranty Guideline http://www.cisco.com/en/US/prod/prod_warranty09186a00800b5594.html). We recommend always using official Cisco components.
Hope this helps,
/Phil

Help me clarify: Difference between Joining and Extending Wireless Network

I've eventually figured out how to get my AirPort Express to allow my Mac Pro access to the internet Via Ethernet cable by joining an existing wireless network. What's the difference between that and extending it? By extending it I loose my ability to use the ethernet to connect to internet on my Mac Pro. Odd thing is though when I initially used AirPort Utility to set up my AirPort Express, I went through all the options to get it configured to access my existing network and I checked option to allow internet access through ethernet. All is well, but then I still don't have access to the internet through the ethernet and I noticed that the setting is on Extended. Just curious why it would give me the option to use the ethernet, set it on extended and not even work.

I've eventually figured out how to get my AirPort Express to allow my Mac Pro access to the internet Via Ethernet cable by joining an existing wireless network. What's the difference between that and extending it?
When "joining a network," the AirPort Express Base Station (AX) acts just like any other wireless client (laptop, desktop, printer, etc.) You would want to configure the AX to join a network when you only want to use it to share a USB printer and/or stream iTunes.
When "extending a network," the AX can perform as either a main, relay, or remote base station in a Wireless Distribution System (WDS). A WDS is primarily used to extend a network wirelessly.
By extending it I loose my ability to use the ethernet to connect to internet on my Mac Pro.
If the AX is configured as either a relay/remote base station in a WDS, you actually can use it's Ethernet port for Internet access. Of course, this relay/remote must be connected to a main base station, that itself, has Internet access.

The Difference between Extending a Wireless network and WDS?

I have an Extreme (n) and an Express (n).
I want to make sure the signal is strong upstairs and share a printer (connected to the express) and use AirTunes. I also may add an external drive to the Extreme.
What's the difference between Extending a Wireless Network and using WDS? Will there be a speed difference?
Message was edited by: J. Christopher Edwards

I think you don't get it
If I have another draft N router that operates at 2.4G and I have only n devices I can still use WDS and it will connect using draft n in the 2.4G band.
If one g device connects to the network will go in mixed mode.
The AEBS will still report 130 Mbps for your n clients and 54 for your g clients.
If the other router is g only obviously you can't connect between the two router at n mode but still the AEBS will be in mixed mode and not in g. The Extreme will still report 130 Mbps for the connected n clients.
I can tell you that because I have actually implemented it am not taking off the documentation.
The same device if I try to use the "extend n network" does not even see the AEBS but will happily keep the n in the WDS mode and though the bandwidth is halved it is still more than g.
In any case enough for this!

Using A FireWire cable between two Macs and Migration Assistance to transfer all my desktop to my macbook laptop, will all my apps, bookmarks, contacts and files be transferred? I am trying to make a complete copy of my desktop to my laptop.

Using a FireWire cable between two Macs and the Migration Assistance feature, will al my apps, bookmarks, contacts and files be tranferred?

See Pondini's Setup New Mac guide

Is there an easy way to switch between ehternet and wifi connection without having to disconnect the ethernet cable?

Hi All
Was wondering if there is an easy way to switch between ethernet and wifi connection on Apple TV without having to disconnect the ethernet cable. The reason I ask is that I find it quicker to use my ethernet connection via a Netgear Powerline Home Theatre Set-up to stream Trailers and Movies on the Apple TV, however this is no good when connecting directly to my Mac to stream music or TV shows in iTunes, so revert to the wifi connection that I created on my Time Capsule to do this.
Would be handy if Apple TV had a menu option where you could manually change the connection type depending on what you were doing, as per above scenario.
Cheers
Brett

brettfromseabrook wrote:
Hi All
Was wondering if there is an easy way to switch between ethernet and wifi connection on Apple TV without having to disconnect the ethernet cable.
Unfortunately not.

HT5437 I installed the cable between the TV set ant my new Apple TV for streaming. I turned both on and nothing happened. I have a light on the Apple TV. I am working off of my Tablet.

I installed the cable between my TV set and the new apple Tv for streaming. Nothing cam up on my TV screen. I want to get NETFLIx from my apple tablet and myTv set.

Change to the appropriate input on the tv.

Extended cable between Soundcard and X-Fi-E/A-Modul

Similar Messages

Maybe you are looking for