Extended classic scenario clarification

Hello
I have a question in case of a extended classic scenario.
Shopping cart is created by a employee and approved by a manager. But still no vendor exists in the shopping cart after approval. Now how the PO is created in SRM.
Note sourcing is activated, strategic and operational purchasers exits. How the process is implemented. Will the purchasers get informed via work items? Will they get shopping cart work items or incomplete PO work items.
Could any of you please give clarity on this.
Thanks in advance.

Hi
Once the shopping cart is created, based on sourcing config and also based on Purchase group responsibility the respective shopping cart flows in to the 'sourcing cockpit'(SOCO). Buyers/Purchasers will see all the open shopping carts and in SOCO there are multiple options available for purchasers to do. Such as creation of PO by just adding the vendor and right price/ creation of Bid or Auction or contract/ group the similiar requirements into one requirement create PO etc.
If the follow on document is chosen to be a PO or Contract then the shopping cart will go out of the SOCO once the PO/contract created. If at all the SC is considered for Bid/Auction process then the SC remains in SOCO till the Bid/Acution process is completed. Hope this helps
You can also look at SAP application help for SRM sourcing
http://help.sap.com/saphelp_srm702/helpdata/EN/d8/33ec56f17f4404806072749f7e764f/frameset.htm
Rgds/Kiran

Similar Messages

Sourcing in extended classic scenario

Hello, all
We are using the extended classic scenario in SRM 5.0.
In sourcing cockpit I have the following problem. In spro Supplier Relationship Management/SRM/Server/Sourcing/Define Sourcing for Product Categories I set Sourcing Always Carried Out. From a shopping cart the purchase order is created automatically as the data complete, but I'd like to sent shopping cart to the sourcing, where from a shopping cart create bid invitation or purchase order. How do it?
Please help,
Best regards,
Guzal

Hi Guzal,
As informed by Claudia, Incomplete mainly means no vendor assignment, no price etc.
If the vendor is assigned at the shopping cart level by means of a contract the shopping cart (details) is complete. Even in this case the SC should go to Sourcing cockpit in case of "Sourcing Always carried out" is chosen in the sourcing column.
In the above case the P.O gets directly created from SC only when the options
" Sourcing never carried out" & " Sourcing carried out for items w/o assigned source of supply" were chosen.
Hope you will be more clear on this issue. Any clarifications always welcome.
Rgds,
Teja

ASN in Extended Classic Scenario with SUS

Hi SRMer?
Is it possible to create an ASN in SUS with Extended Classic Scenario (ECS)?
OSS note 543544 mention that the scenario is limited for document types Purchase Order, Purchase Order Response and Change Order. Confirmations and invoices are not possible. There is no indication on ASNs.
Any help will be appreciated.
Regards.

Hi
Please go through these links ->
SUS-MM Confirmation without ASN
Re: Details on ASN
The specified item was not found.
SUS ASN - mandatory field
ASN Confirmation not created,
Clarifications on EBP-SUS and MM-SUS Scenario
Re: SUS-MM scenario with "POR (order ack.)" and ASN for free text
Creating custom field in ASN screen of SRM SUS
SUS Invoice
Regards
- Atul

Extended Classic Scenario not creating backend PO

Hi All
We are just starting with SRM (Using SRM 5.0 SRM Server 5.5) and trying to decide to use Classic or Extended Classic.
I can get the Classic working were an approved SC creates a backend PO without any problem. However when I switch on Extended Classic the backend PO is not created from an apporved SC.
In RZ20 my error is Shopping cart 1000000080 (PReq. ): BBP_BD 002 Buffer table not up to date and Table BBP_DOCUMENT_TAB is empty
In config I activated the extended classic scenario as well as activating the backend purchasing groups as responsible. Under sourcing I also defined for the relevant product categories as "1 - Sourcing Never Carried out"
Am I missing something obvious??
Many thanks for any help.
Daniel

Hi Daniel,
In reference to the info. you have provided, it looks like you have not switched to Extended Classic Scenario properly.
Once you say you are on ECS, the P.O should get created in SRM and the copy of it should get replicated to R/3.
As you said you have flagged both the check boxes in SPRO for ECS activation, try activating sourcing also.
SPRO > IMG > SRM > SRM Server > Sourcing > Choose one Product category for which you want to create shopping cart and set the setting as " Sourcing Always carried out".
Check whether the approved shopping cart is coming to Sourcing cockpit or not.And from there try to create a P.O by assigning vendor.
Also ensure that no BADI is activated which converts ECS to Classic scenario for the Product category you have choosen.
If this cycle woks then definitely what you require will also work.Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

POR transferred into MM(Backend) system in Extended Classic Scenario

I am working on standard EBP-SUS Extended Classic Scenario. We have SRM Server 7.0 SP9
As we are successfully send PO from EBP to SUS.
Issue : On working to Purchase Order Response,i am getting POR sent by SUS to EBP but we are not getting it replicated to MM.
Our Concerns about is it need extra configuration required or need to have apply some note to getting replicated POR in MM from EBP or have to configure some XI Scenario to replicate POR from SRM EBP to MM.
As we know that Extended Classic Scenario supports till Purchase Order Response still we are not getting Purchase Order Response in MM.
Please tell us, Provided Solution will be really appreaciated.
Thanks.
Regards,
Pawan Keshwani

hi,
Pls see the foll notes:
Note 576349 - Terms of payment in the ECS
Note 541934 - Modification note: Copying base date from T052
Note 953999 - ECS: Terms of Payment values not in PO header
Note 940453 - Backend payment term data not updated in the extended PO
Note 945018 - Incoterms data not transferred to the back end
BR,
Disha.
Pls reward points for useful answers.

Error while creating Manual Service PO in Extended Classic Scenario

Hi Experts,
Extended Classic scenario (SRM 7.0 with ECC 6.0) While Creating Manual Service PO in SRM i am getting the below mentioned error messages. Can any one suggest what could be the problem.
Error Msgs:
1. Backend Error:In case of account assignment, please enter acc. assignment data for item
2. Backend Error:Purchase order still contains faulty items
Regards,
Mohan

Hi,
Yes i given all CC and GL information properly in Purchase Order Document for Service.. Still finding the error for Service PO alone.
Pl do the needful
Regards,
Mohan

PO error - extended classic scenario

Hi Guys,
I'm using SRM 5.0 with extended classic scenario...
During creation of the purchase order locally (in SRM) I got the "error in process" status.
My means of T-code RZ20 I got the following info to ithis error:
context:B2B Procurement
object name:Purchase Order
short name: Backend application errors
status: Active
Alert text: PO 700..1: Call of a method or kernel Method that has not been implemented
using Transaction BBP_PD I got the following status:
Status: I1080
Description: in transfer to execution system
Do you have any idea what should I do in order to resolve this outstanding issue?
many thanks in advance for your help.
regards,
Piotrek

Hi
Go to transaction - SPAM to get all the required Patch levels and other required system version details.
Meanwhile, try the following SAP OSS Notes as well ->
Note 508972 - Error during transfer of extended purchase orders
Note 881650 - Duplicate transfer/output of the purchase order
PO status in " error In Process ".
Error in Transfer Process (Urgent )
FOLLOW ON DOCUMENT NOT CREATED ( ERROR IN PROCESS)
Hope this will help.
Regards
- Atul

PO text transfer to Back-end in case of Extended Classic Scenario in SRM 4.

Dear experts,
My system is in SRM 4.0 in Extended Classic Scenario. We use in the PO internal note text and vendor But thses texts are not transfered to Back-end.
Is it normal?
Do I need to customize something?
Can it be achieved by BADi? How then?
OR is it only possible from SRM 5.0?
Thanks in advance
RD

Yes you can do this. Implement BADI BBP_CREATE_BE_PO_NEW, Refer parameter IS_SC_DOCUMENT>LONGTEXT, and CS_PO_DOCUMENT>IT_PO_ITEM_TEXT. Map the exact text-id of the R/3.
Note: if this BADI is not present, use BBP_CREATE_PO_BACK
Regards, IA

No GR on Confirmation Approval in Extended Classic Scenario

Hi all gurus out there,
We are trying to implement confirmation approval workflow in our SRM system. Our SRM version is SRM 3.0 or EBP 4.0 and we are operating in extended classic scenario.
We implement the approval workflow WS10400002 (1-step approval) and WS10400010 (no approval). WS10400002 is used in situation when an administrator does the confirmation and will go to the requestor for approval. Here, when the requestor approves the confirmation, the status is updated correctly to 'Approved' but no goods receipt is triggered by the system. We looked at the workflow and found that there is no task/activity to do the post goods receipt in the backend system.
Can someone please confirm whether these are the correct workflows that I should be using and that it is not a bug? I just want to make sure it is not as a result of a standard limitation before going back to SAP.
Cheers!
Siow Fong

Hi Guys,
I checked with SAP on this and found out that the standard codes would have created the goods receipt. This creation is no longer coded in the workflow itself (like the old workflow used to be). The reason why it was not working for us was a piece of code being added that prevented the creation of the goods receipt.
Regards
Siow Fong

Problem in Extended Classic Scenario related to PO

hi,
we are using Extended classic scenario in our client. User has created a SC .when we are going to create a PO system is showing an error Purchase Group B01 does not exist.
This Purchase group is not created in R3 or neither replicated to SRM.and it is not assigned in the Org structure.
Kindly Let me know from where the purchase Group might be Picked apart from the org Structure.
regards
subhash

Hi
Can you check your SC how this Purchase group picked form your basic data ?
since this purchase group is existing in srm thats why it picked while create sc right?
regards
Muthu

PO output for Extended classic Scenario from the R/3 backend

Hi,
1) Does the PO output (ignoring the config maintained in SRM server 5.5 for the output) through R/3 backend is standard or it is mandatory to give local outputs from SRM only incase of Extended classic scenario?
Regards,
DV

Hi Anil,
We are working on extended classic scenario with SRM 5.0 & ECC6.0.
Please explain how we can take "PO output for Extended classic Scenario from the R/3 backend ".
Please send the related document to [email protected]
Thanks in advance
Ashutosh

Freight is not updated in R/3 in the Extended Classic scenario

Friends,
Freight is not updated in R/3 in the Extended Classic scenario.
Once a PO is ordered, if a freight condition in SRM is applied, it does not get updated in R/3.
We have created a condition for Freight (Value and Percentage)in Create
Payment Conditions using the following menu path:
spro
--> Supplier Relationship Management
--> SRM Server
--> Cross-Application Basic Settings
--> Pricing
--> Process Payment Conditions
When creating a Purchase Order in SRM in the "Item Data" tab, there is
a"Pricing" option. Choose "Pricing" and select "Add Further Conditions"
from the drop down menu. Here Freight is available. Add Freight and
the PO record in SRM is updated with the Freight Condition. However,
upon ordering, the Freight condition does not transfer to the PO
recordin R/3.
We've heard this can be achieved by enhancement: only ie by implementing
set of BADIs.. But does anyone know WHICH BADIs we need? Or how we could find out? Thanks.

Hi
 You can either of these BADIs to handlwe the scenario.
BBP_CREATE_BE_PO_NEW Exit while creating a purchase order in the backend system
BBP_CREATE_PO_BACK OLD Exit while creating a PO in the backend system
BBP_ECS_PO_OUT_BADI ECS: PO Transfer to Logistics Backend
BBP_EXTLOCALPO_BADI Control Extended Classic Scenario
Hope this will help.
Please reward suitable points.
Regards
- Atul

Extended Classic Scenario, BADI for PO creation in R/3

Hi,
We are using the extended classic scenario. When the PO gets replicated from SRM to R/3, right now the field CATALOGID is not being transmitted to the backend R/3 system.
1) What BADI should I implement (and the method) to transmit the CATALOGID to R/3?
2) After implementing the BADI, do I also have to change the BAPI?
3) Is the BAPI used to transfer data from SRM to R/3, BAPI_PO_CREATE?
Thanks and Regards,
Peter

Hi Peter,
1-You can use BBP_ECS_PO_OUT_BADI for ECS scenario.
Since the R3 PO does not have field for catalog id, the EKKO- BEDNR (Tracking Number) field can been used for example to store this information. In this BADI all the items are identified and their tracking number field is populated with a catalogue id value.
2-If you use the tracking number field, no use of R/3 BADI is required.
3-BAPI_PO_CREATE1
Please check my answers in this post :
catalogid field not going in R3 backend
Kind regards
Yann
Message was edited by: Yann Bouillut
Message was edited by: Yann Bouillut

Extended Classic Scenario - Free Items?

Does SAP support PO's in Extended Classic Scenario with a zero price (free items)?
My client is switching from classic to extended classic scenario and they require to be able to creaet PO's that have a zero price like they have in the classic scenario.
We are currently getting an error that we need a price with the IR flag, but I would expect the system to automatically unflag the IR flag for a free item?

Hi Jay,
Thanks for your response. There are two problems with your soluiton. First the shopping cart doesn't have the IR flag on it and can't be changed by the user and we have PO's created directly from SC's and go out to the vendor.
Second, In extended classic scenario it apprears that the system doesn't allow you to change the ir flag on the PO and make the cooresponding change in the ERP PO.

Switch from classic to Extended Classic Scenario- Impact

Hello,
We are proposing to switch from Classic to Extended Classic Scenario.
We are on SRM_SERVER 550,Sp7 and SAP 4.7 backend.
We want to know if this is technically feasible to switch and have less/no impact on existing transactional data and master data.
Main concerns are: Existing open Shopping carts and PO's.
We are also modifying the WF by including buyer completion WF.
Will the carts created in classic scenario and 'awaiting approval' work similarly in ECS?
Can we copy old carts (created in classic scenario) into new ones in ECS?
Are there any other issues like the ones above which people have come across?
Is there any standard SAP material/Consulting note available
which gives some guidelines for switching scenarios?
Regards,
Srivatsan

Hello,
You can switch from the classic to the extended classic scenario by making the global settings in the IMG.
But it would be better if you can decide if only a particular set of categories need ECS.
If you wish to have both the scenarios,the deciding factor is the product category.
You can also activate a BADI for the control of ECS despite the above Global settings.
Reward if answer is helpful,
Thanks & Regards,
Nagarajan

Extended classic scenario clarification

Similar Messages

Maybe you are looking for