Extended Desktop (Vertical?)

So I just bought a brand new 15" MBP, and I have an older LCD display that I have just sitting around. Is it possible to do extended desktop vertically with the MBP on the bottom? This would be perfect if it does work. I would also be willing to purchase third party software if needed. Thanks in advance.

Yes, that's quite possible. No third-party software required.

Similar Messages

  • Tablet PC calibration error in Adobe Photoshop and Illustrator CS3 whilst in Extended Desktop Mode

    Hey everyone!
    I've run into a snag which hasn't bugged me before because I never used a second monitor, but now that I do, Photoshop and Illustrator don't function properly.
    I am running my Adobe products on my Lenovo X61 Thinkpad Tablet, which is Wacom PenEnabled. It's got the basic digitizer pen and pen pressure features, no stylus tilt or anything.
    Whenever I run Photoshop or Illustrator in Extended Desktop Mode so I can have a different window open on my external monitor and the Adobe app on my tablet screen, my stylus goes strange. It seems to think that the extended desktop is part of the Adobe window, so when I move my stylus to draw, the cursor will appear on the external monitor, usually proportionate to the size of the screen...ie. It interprets the external and tablet screens as one desktop and the top left corner of my tablet screen is the top left of my external, whilst the bottom right on tablet IS the bottom right on tablet, if that makes any sense...sorry.
    So I can't draw anything in photosho unless I set it back to standard desktop mode, or mirrored desktop. I've searched over the net and these forums and I can't find a fix for this. I was walking in harvey norman the other day and the Wacom Cintiq 12" was there on display, and it had the same issue with extended desktop and photoshop.
    Has anyone had this issue before and/or does anyone know of a fix for it? I'll keep searching around and playing with the computer until I fix it and I'll post any solutions I find here if noone else has one.
    My system details are:
    Abobe Photoshop CS3 10.0.0
    Adobe Illustrator CS3 13.0.0
    OS: Windows Vista Build 6001, Service Pack 1, 32bit
    RAM: 2GB
    HD: 18.2GB free Disk Space (out of 66.3GB on the Active Partition)
    Video: Intel GMA: Mobile Intel(R) 965 Express Chipset Family

    I'm using an HP tx2011au tablet pc, using adobe flash cs3 and have the exact same problem. it becomes decalibrated only while the flash window is open, and only while flash has a file open, and only when using an extended desktop. even if flash is open and it has no files open it works fine.

  • IMac Extended desktop & NTSC Monitor possible?

    Is there a method to jointly connect a second VGA monitor for extended desktop support along with a NTSC monitor (TV) via S-Video?

    duane i beg to differ. heres a download for most newer macs to do it. http://www.rutemoeller.com/mp/ibook/ibook_e.html although be warned applecare will not cover anything screenspanning doctor screws up. not that it has. i have used it on my imac for about 5 months and my youth directors ibook g4 1ghz. its great

  • I cannot get my iMac to connect to my macbook via Thunderbolt to use my laptop as an extended desktop

    I am trying to connect my iMac 21.5" desktop to my macbook pro via Thunderbolt cable so that I can use my laptop as an extended desktop. I have tried using detect displays to get it to show up and nothing happens. I've tried doing command + F2 to make it a targeted display, but the only thing I can get to happen is my iMac will mirror my Macbook and that's not what I want. No matter what I have tried it hasn't worked. I have tried turning both computers off and I have a brand new thunderbolt cable. I've updated all the software. Is there anything else I'm missing??
    I'm running OSX Yosemite 10.10.1
    Thank you !

    We've already done all of that. And we used the same thunderbolt cable to connect two iMac's and that worked totally fine doing the Command+ F2. I don't understand why we can't get the macbook to do the same.

  • How can i use my old iMac as a extended desktop display for my new iMac?

    I recently purchased a 21.5 in iMac and wanted to use my old iMac as a extended desktop. My new iMac has thunderbolt and USB 3.0 connections while my old iMac has firewire (400 and 800), USB 2.0 and mini-DVI. Is this posible?

    Welcome to Apple Support Communities
    If your iMac has got Mini-DVI, you have a 17, 20 or 24-inch iMac that doesn't support Target Display. Late 2009 and Mid 2010 27-inch iMacs, and iMacs with Thunderbolt can be used as external displays. Read > http://support.apple.com/kb/PH11302?viewlocale=en_US&locale=en_US
    If your old iMac doesn't support Target Display mode, you can use ScreenRecycler to use your old iMac as an extended display for the new iMac. The only thing you need is that both Macs are connected to the same network

  • HT5019 If my second display is not showing up on the graphics display window, yet the second display is showing a mirror image, how can I get it to recognize the second display and allow me to setup extended desktop?

    I'm running 10.9.2 on a Power Mac from 2013.  I am using two identical HP monitors.  I have a Y adapter to connect the monitors.  Which I'm guessing means the computer is only seeing one display since there is only one display output. 

    There are no PowerMacs from 2013.   The desktop tower from 2006 on got named Mac Pro.    The problem is probably the Y adapter.    You need a videocard with two display ports, or two videocards to be able to make an extended desktop from one to the other.  If you gave us the Y adapter make and model, we could tell if it supports screen spanning or not.

  • Using a second computer (an iMac) as an extended desktop monitor

    Hello
    I have a powerbook g4 and would really like to use a separate older iMac as an extended desktop. Is there a way to turn the iMac into just a monitor recognized by my powerbook?

    Does ScreenRecycler do what you want?
    (39553)

  • Macbook Pro Retina: can anyone help me with running 2 extended desktop DVIs?

    I know I need 2 thunderbolt to DVI adapters for this. In the UK these are £25 each, but the MiniDisplayPort to DVI adapters which look the same are very much cheaper .....
    http://www.amazon.com/DisplayPort-Female-Adapter-Macbook-Laptop/dp/B003BHHIA4/re f=sr_1_1?s=electronics&ie=UTF8&qid=1359830910&sr=1-1&keywords=minidisplayport+to +DVI
    They look the same as thunderbolt to DVIs but is there a difference? Anybody know if the thunderbolt to DVI is an ACTIVE adapter, which means the cheaper versions won't work?
    Secondly, I've read scary stuff here from people who think their thunderbolt to DVI fried their monitors. Is there any evidence which supports this?
    Does anyone out there use two extended desktop DVIs on a daily basis with a Pro Retina? Any tips or things I should know?

    I suggest you buy the Apple TB/MDP to DVI adapters as I have tried another brand and it dod not work. That was on a late 15" 2011 model, YMMV.
    Second I have never heard of a Apple TB/MDP to DVI adapter ever frying a monitor of any make or model.
    Please post references to this claim.
    May be possible with a poorly desinged adapter with some of the TB power output being cross linked to one of the DVI pins/connectors. But still doubtful.

  • Mac Mini (mid-2011) dual display with extended desktop

    Can Mac Mini (mid-2011) dual display different picture on HDMI TV and DVI monitor. I can only get it to mirror and not display different programs or extended desktop. Can i "extend" instead of "mirror"? and how

    Hi David it should...
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapter and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    Are you using splitter maybe?

  • Is it possible to assign an extended desktop to be an external desktop for a window's machine?

    I have an iMac with Lion and a Windows Vists Laptop and corresponding external monitor on my desk. I'd ideally like to use my iMac as an external monitor for the Window's machine and essentially remove the physical one from my desk.  Make sense?
    I already have 4 extended desktops created on my iMac and I'm HOPING that I could assign Desktop 4 (example) as the external monitor to be controlled by the Vista machine. I'd like to be able to flip between my Mac OS and the "extrernal monitor'' via the 2-finger-swipe gesture. Anyone have any ideas?
    NOTE: I also have Paralles installed with Windows 7 running on my iMac, but I specifically need the Vista machine to have the external monitor, so please do not suggest this solution.

    Thank you!  While reading these directions, I realized that I have the wrong connector.  I have the old Mac Monitor serial port to VGA instead of the MiniDisplay port to VGA needed (didn't even think about this computer not having that port available).  I just bought the correct one from Apple, so I'll attempt these instructions as soon as it arrives.
    To confirm: I'll be able to run the iMac as the external display and have Lion open simultaneously, right? (Obviously not both on the screen simultaneously, but the ability to "switch" views) Based on the article, the trick is turning the Target Display on/off with the Command + F2 buttons (as opposed to assigning an extended desktop and using gestures), correct?
    Again, thank you for your help!

  • Dual Display, 2 Monitors - Extended Desktop

    Hello Everyone:
    There isn't a clear cut answer or solution in connected a Macbook Air to 2 external monitors in an attempt to create an extended desktop. I have read older posts that it's either doable or not doable. My questions are the following:
    -Is it possible to connect a new Macbook Air to 2 external monitors for extended desktop purposes?
    -Some users have reported lag issues (mouse dragging , delays, etc.). Will this happen for sure with a Macbook Air or is it a monitor issue?
    -What's the best non-Apple monitor brand that would work best with a Macbook Air for dual display purposes? I've read that Dells have a problem in this regard.
    -What would be the advantage or disadvantage of using a dock station in setting up a dual display environment? Would this add to the lag, latency factor?
    I'm thinking of investing in a new Macbook Air, but I want to make sure I dont end up with silly issues - such as latency, monitors, etc.
    Thank you for all your help and advise.
    Best,
    G.

    Yes, extended desktop works with monitors set to differant resoultions. the Monitors pref pane allows you to select relative arrangements and rez of all monitors composing the extended desktop.
    personally I run a dell CRT at 2304 X 1728 @ 60Hz along with an NEC 6FG a 2048 X 1280 @ 60Hz off a radeon 9800pro on an MDD.

  • Airplay display issues: "extend desktop" not working properly. Secondary display continues to mirror.

    Whenever I turn my airplay display on and set it to "extend desktop," my secondary display (TV) continues mirroring my mac book pro (hereinafter MBP). It doesn't fully mirror my MBP, but my secondary display registers every time I switch between my desktop 1 and my full screen apps. Moreover, When I do switch to a fullscreen app on my MBP, I get a blank (blue-ish) screen on my TV.
    Any solutions!?!
    Additionally, "extended desktop" for my Airplay display worked properly when Mavericks was first released.

    Try this:
    Click on the Apple TV Icon on the top toolbar
    Then, select "Mirror Built in Display" instead of extend desktop
    In the same menu under "Match Desktop size to:" select "Apple TV" (or keep it on "built in display if that works"
    This solved a similar problem for me. 

  • HT5019 How do I play a video on my extended desktop (my TV) and still use my desktop to surf, work, etc.?

    I have created the extended desktop, but don't know how to get the video on to the extended desktop, which displays on my TV.  I can't seem to play a file on my tv, and use my desktop on the mac to surf, work, etc. You seem to be able to use either ione or the other desktop - not both at once.
    I was easily able to do this on my old PC!

    Apple menu -> System Preferences -> Displays
    Dragging the menubar on the image representing one display to the image representing the second display.
    As most programs send the signal for video to the primary display this will often free up the other display for using while you play video.  You can always use another video playback software, or just maximize the video playback software's window, instead of going fullscreen.  It really depends on the software you are using to play videos.

  • Using extended desktop mode with ThinkPad x220

    I have an Acer AL2216W external monitor. It has a resolution of 1680 x 1050
    http://support.acer.com/acerpanam/monitor/0000/Acer/AL2216W/AL2216Wsp2.shtml
    When I use extended desktop mode with the external monitor set as the primary display, everything scales properly on both the external and internal monitor.
    However, if I set the internal monitor as the primary display, the external display does not fill the screen (there is a big black border around the desktop).
    In both cases, the resolution setting for the external monitor is 1680 x 1050.
    Is this normal behaviour?
    Solved!
    Go to Solution.

    Hello,
    That's how Windows behaves.  Supposedly Realtime Soft Ltd.'s UltraMon gives you more precise control over wallpaper under Windows, but I have not used it myself.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Display goes to Extended Desktop when awoke in Closed Clamshell on TV

    I use my 13" MBP in closed Clam Shell mode nearly all the time. I have it connected to my Sony 40" HDTV using the Griffin adapter and it works great most of the time.
    BUT sometimes when it comes off sleep mode. All my desktop icons are on the extended desktop (TV) and the dock is on the main screen (Closed Laptop Screen)
    So I have to Open up laptop. Make Laptop go to sleep. Close Laptop to closed clam shell again then everything is good on TV again.
    Not sure why this is happening. Probably 1 in 10 sleeps it does this.
    Any Ideas anyone.......
    Thanks in advance

    Yup. I have no issues using an external display in clamshell mode. It's only when I try to airplay to my apple tv while in this clamshell mode that I run into problems. So to clarify, there are 3 devices in my situation: my macbook, my external monitor, and my apple tv (which is connected to my hdtv of course, so 4 devices). Usually I just use my external monitor with my macbook closed. That works fine. But when I occasionally want to airplay to my apple tv as additional mirrored/extended monitor, I have to open up the macbook first to exit clamshell mode. Otherwise if I just go straight into airplay while still in clamshell mode, my hdtv shows a frozen image, my external monitor goes black and I have no choice but to manually turn off my macbook. Hope that makes sense. I think it would be easier if I could draw a diagram haha.

Maybe you are looking for