Extended flows being torn down?

Hello.
I have a SAN with an external client. The inbound backup flow goes through an 11506 with ver 7.2~. Backups of 2 to 3 hours work fine, but others with a longer time die around 8 - 10 hours into the session.
I modified the flow-timeout multiplier for 20 hours, but that didn't help- as I expected. The session is dying mid-activity and not during an idle period. Has anyone encountered similiar behavior in long term flows?
As a separate question - how is the flow-timeout value calculated? Isn't the default 16 (16*16=256)? It would seem then that if I opened a terminal window into a backend server and let it sit - I should see it terminate within 5 minutes. But usually, the window will stay active until an overnight period..then close. Modifying the flow-timeout value fixes this problem, but doesn't quite explain why the default value didn't time out the session sooner.
Thanks,
Chad

Gilles,
There is no RESET.
On the content rule, I set the flow-timeout.
And yes, the content is hitting the right rule.
I understand the CSS doesn't "proxy" the connection, but does session information (layer 5, OSI) get exchanged between the client and CSS in place of the server?
For example, I had a Solaris 2.6 client that FTP'd large files (2GB) to a server without issue. When I placed the server behind the CSS, the ftp would fail on these large files..around 1.65GB. If I put the same file on another client - say a Linux box - the ftp succeeds to the same server. This leads me to believe that something isn't being agreed on correctly in the session or presentation portions - but how do I confirm that?
So previous experiences like this, add further confusion to my current problem, where small volumes from the client to the SAN succeed, but a larger,longer-term volume backup fails after 8-10 hours.
If the CSS resources were being maxed, would it kill off active long-term flows? I have no indication that the CSS is maxed on resources, but at this point I'm trying to consider all options.
Thanks,
Chad

Similar Messages

Session is being torn down. Reason: User Requested

Hi,
I have an issue with a Site to site VPn using IPSec.
I have several tunnels all configured the same and this is the only one with the isssue. looks like the VPN is dropped whene remote peer pings the internal IP (172.16.30.88). Tunnel drops after 7 - 8secs.
I got this message when enabling isakmp debug :
Nov 04 17:20:32 [IKEv1]Group = 2XX.YY.140.135, IP = XX.YY.140.135, Session is being torn down. Reason: User Requested
I would really appreciate some advice about how to troubleshoot this issue, as i am new to ASA.
Here are some more logs :
Thanks in advance !
5|Nov 04 2013|16:53:19|713904|||||IP = XX.YY.140.135, Received encrypted packet with no matching SA, dropping
4|Nov 04 2013|16:53:19|113019|||||Group = XX.YY.140.135, Username = XX.YY.140.135, IP = XX.YY.140.135, Session disconnected. Session Type: LAN-to-LAN, Duration: 0h:00m:10s, Bytes xmt: 608, Bytes rcv: 128, Reason: User Requested
5|Nov 04 2013|16:53:19|713259|||||Group = XX.YY.140.135, IP = XX.YY.140.135, Session is being torn down. Reason: User Requested
6|Nov 04 2013|16:53:19|302020|172.16.10.19|0|172.16.10.254|0|Built inbound ICMP connection for faddr 172.16.10.19/0 gaddr 172.16.10.254/0 laddr 172.16.10.254/0
6|Nov 04 2013|16:53:19|602304|||||IPSEC: An inbound LAN-to-LAN SA (SPI= 0x0864D3AB) between XX.YY.140.135 and 202.171.68.14 (user= XX.YY.140.135) has been deleted.
6|Nov 04 2013|16:53:19|602304|||||IPSEC: An outbound LAN-to-LAN SA (SPI= 0x94F43112) between 202.171.68.14 and XX.YY.140.135 (user= XX.YY.140.135) has been deleted.
5|Nov 04 2013|16:53:18|713050|||||Group = XX.YY.140.135, IP = XX.YY.140.135, Connection terminated for peer XX.YY.140.135. Reason: Peer Terminate Remote Proxy 192.168.0.0, Local Proxy 172.16.30.88
6|Nov 04 2013|16:53:18|302020|172.16.30.88|0|192.168.0.1|26299|Built outbound ICMP connection for faddr 192.168.0.1/26299 gaddr 172.16.30.88/0 laddr 172.16.30.88/0
6|Nov 04 2013|16:53:18|302020|192.168.0.1|26299|172.16.30.88|0|Built inbound ICMP connection for faddr 192.168.0.1/26299 gaddr 172.16.30.88/0 laddr 172.16.30.88/0
5|Nov 04 2013|16:53:08|713120|||||Group = XX.YY.140.135, IP = XX.YY.140.135, PHASE 2 COMPLETED (msgid=f141e93e)
6|Nov 04 2013|16:53:08|602303|||||IPSEC: An inbound LAN-to-LAN SA (SPI= 0x0864D3AB) between 202.171.68.14 and XX.YY.140.135 (user= XX.YY.140.135) has been created.
6|Nov 04 2013|16:53:08|602303|||||IPSEC: An outbound LAN-to-LAN SA (SPI= 0x94F43112) between 202.171.68.14 and XX.YY.140.135 (user= XX.YY.140.135) has been created.
5|Nov 04 2013|16:53:08|713049|||||Group = XX.YY.140.135, IP = XX.YY.140.135, Security negotiation complete for LAN-to-LAN Group (XX.YY.140.135) Responder, Inbound SPI = 0x0864d3ab, Outbound SPI = 0x94f43112
5|Nov 04 2013|16:53:08|713119|||||Group = XX.YY.140.135, IP = XX.YY.140.135, PHASE 1 COMPLETED
6|Nov 04 2013|16:53:08|113009|||||AAA retrieved default group policy (CLT_TEASOA_L2L_GroupPolicy) for user = XX.YY.140.135
6|Nov 04 2013|16:53:08|713172|||||Group = XX.YY.140.135, IP = XX.YY.140.135, Automatic NAT Detection Status: Remote end is NOT behind a NAT device This end is NOT behind a NAT device

Hi Florian
tunnel is coming UP?
if so and after few time is going down...sometimes could be related to sessions timeout issues.
try to configure SLA with infinite ping and see if this works.
sla monitor x
type echo protocol ipIcmpEcho sla_monitor_address interface outside_interface
frequency 5
exit
sla monitor schedule 1 life forever start-time now

I have Adobe CS. Upgraded my computer to Windows 7. Installed CS but I can't activate Photoshop due to the online/phone activation being pulled down. Now the 30 days has expired. Tried to follow directions to install CS2 but no luck. I would really like t

I have Adobe CS. Upgraded my computer to Windows 7. Installed CS but I can't activate Photoshop due to the online/phone activation being pulled down. Now the 30 days has expired. Tried to follow directions to install CS2 but no luck. I would really like to speak with someone at Adobe to get it working again. THanks

If you would like to speak with someone at Adobe you will need to cvontact them directly by chat or phone.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

Mac thinks keyboard key being held down

i have a mac pro 2,1 running 10.6.8. intermittently, it behaves as if a button is being held down on the keyboard. sometimes when i start up and reach the login screen there is immediately a string of password already typed in. as soon as i hit delete to clean i out and type my actual password, there is no problem. then when i arrive at my desktop, there will be the clicking sound like a key is being held down, and again, if i just hit a key, the clicking noise stops. all of this is no big deal, but the bummer is that when i put it to sleep, it often wakes back up immediately, or later on in the middle of the weekend and sits there waiting for me for days. ive tried resetting pram / smc. unplug/replug. no firmware updates for my aluminum keyboard are popping up in software updates. any ideas?

Turning off hardware acceleration worked in all cases.
With hardware acceleration enabled the menu flashing did not occur on the primary display, only the secondary display of a two-monitor system.
Windows 7, ATI Radeon 4800 series.

Drawing Tools Acting As If Shift Key Being Held Down

Hey guys,
Small problem here with Adobe Acrobat Reader 8.0.0. When drawing square, oval, etc., the shapes are coming up as if the Shift Key was being held down. This also happens when trying to draw a box to place a digital signature. Check my keyboard, and there was nothing stuck in it that might be pressing the Shift key. Tested out by using Microsoft Paint to draw lines and they seem to work fine, so I think the problem is only in Adobe. I couldnt find anything online regarding this issue, which was kinda hard to put into words anyways into a search engine. Ive tried running the repair installation of Adobe, but no result. Any idea what might be causing this?

Yes, that looks all like symptoms of a pressed Shift button.
If you want to uninstall and reinstall Firefox then make sure to delete the Firefox program folder to make sure that there aren't any leftover files in it.
*http://kb.mozillazine.org/Uninstalling_Firefox
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 16.0.x: http://www.mozilla.org/en-US/firefox/all.html
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode
*http://windows.microsoft.com/en-US/windows-vista/Advanced-startup-options-including-safe-mode

RRI pass Characteristic value without being drilled down

Hi BW'ers,
I am using Report to Report interface to jump from one report to another. Everything seems to work fine, untill I have a mandatory variable in the receiver report.
The receiver report has a mandatory variable for characteristic 0MRP_CONTRL. The sender has this characteristic as a 'free one', but <b>not drilled down</b> in the query.
When the user goes to the the receiver report, the values of 0MRP_CONTRL are not passed through.
So I would like to know: How can the values be passed to the receiver without being drilled down? In fact the system should check the valid 0MRP_CONTRL values (as it should be in drill down status) and pass them to the receiver.
I tried every possible combination of transaction rsbbs, but not a lot of success.
Hope someone knows the answer. It would be a great help!
Best regards,
Bart

Hello Bart,
"In fact the system should check the valid 0MRP_CONTRL values (as it should be in drill down status) and pass them to the receiver." ... You just mentioned that 0MRP_CONTROL is a free char and not drilled down. What is the exact situation?

Flash player in Firefox acts as if keyboard buttons are being held down during games

I am running Flash Player version 11.5.502.146 for Firefox. While playing flash games online, I often notice that the game thinks that a button is being held down on the keyboard. I have not noticed a patten as to which games are affected or which buttons are being "pressed", but a game that is affected will always act as if the same button is being pressed. For example, one game will always be pressing "Left" (the A key), even when I shut down all processes or restart the browser or computer. Another game will always behave as if the Pause button is being pressed, causing the pause menu to constantly appear and disappear. I have opened these games in Internet Explorer and did not have the same problem. Anyone else having these problems, or have any suggestions?

Flash Player Plug-in (All other browsers)
THAT'S a full offline installer.
Save it.
CLose your browser.
Run it.
You're good to go.

HT4623 I update my iPad mini retina with iOS 7.1 resulting in not being to down load NOR OPEN PPT, WORD files using iWork, page, can anyone pls help?

I update my iPad mini retina with iOS 7.1 resulting in not being to down load NOR OPEN PPT, WORD files using iWork, page, can anyone pls help?

You want to just use Dropbox until the dust settles. To use it from iWork for iOS (assuming you have the Dropbox app installed on your device), open the document in Keynote (for example), tap the share icon (box with upward pointing arrow), choose Open in Another App, choose Keynote as your format, then choose Open in Dropbox and you will get an option to save it to your Dropbox account. To open it from Dropbox in iWork for iOS, open the document in the Dropbox app, tap the share icon, tap Open in Keynote (for example). It's a bit clunky, but works.

IMac acting like space bar being held down

My iMac is acting like the space bar is being held down, even when keyboard and mouse are disconnected. How do I fix this problem?

Well, some info, maybe more than you nedd, but...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Touch Events: How can I check for a button being pressed while another button is being held down?

Hello,
I'm trying to check for a button being pressed while another is down through Touch. In my case, I' m making a game and I need for a button to make the character jump. However, when I hold down right, I notice that the jump button becomes somewhat unresponsive and I have to press it twice or more to get it to trigger, as opposed to just pressing the jump button by itself with nothing held down which works fine. I'm testing this on my Motorola Droid 2.
Here is some of my code that demonstrates text instead of my character moving around:
package {
     import flash.events.TouchEvent;
     import flash.ui.Multitouch;
     import flash.ui.MultitouchInputMode;
     public class Document extends MovieClip {
           Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT;
           private var controls:BottomBar;
           private var debugText:String;
           public function Document() {
                addIngameGUI();
           private function addIngameGUI(){
                controls = new BottomBar();
                controls.y = stage.stageHeight - controls.height;
                addChild(controls);
                controls.aBtn.addEventListener(TouchEvent.TOUCH_BEGIN, testBtns);
                controls.bBtn.addEventListener(TouchEvent.TOUCH_BEGIN, testBtns);
                controls.leftArrow.addEventListener(TouchEvent.TOUCH_BEGIN, testBtns);
                controls.rightArrow.addEventListener(TouchEvent.TOUCH_BEGIN, testBtns);
         private function testBtns(event:TouchEvent){
               debugText.text = event.target.name;
What am I doing wrong? Is there a better approach?
Thank you in advance.

Hello,
I'm trying to check for a button being pressed while another is down through Touch. In my case, I' m making a game and I need for a button to make the character jump. However, when I hold down right, I notice that the jump button becomes somewhat unresponsive and I have to press it twice or more to get it to trigger, as opposed to just pressing the jump button by itself with nothing held down which works fine. I'm testing this on my Motorola Droid 2.
Here is some of my code that demonstrates text instead of my character moving around:
package {
     import flash.events.TouchEvent;
     import flash.ui.Multitouch;
     import flash.ui.MultitouchInputMode;
     public class Document extends MovieClip {
           Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT;
           private var controls:BottomBar;
           private var debugText:String;
           public function Document() {
                addIngameGUI();
           private function addIngameGUI(){
                controls = new BottomBar();
                controls.y = stage.stageHeight - controls.height;
                addChild(controls);
                controls.aBtn.addEventListener(TouchEvent.TOUCH_BEGIN, testBtns);
                controls.bBtn.addEventListener(TouchEvent.TOUCH_BEGIN, testBtns);
                controls.leftArrow.addEventListener(TouchEvent.TOUCH_BEGIN, testBtns);
                controls.rightArrow.addEventListener(TouchEvent.TOUCH_BEGIN, testBtns);
         private function testBtns(event:TouchEvent){
               debugText.text = event.target.name;
What am I doing wrong? Is there a better approach?
Thank you in advance.

My laptop takes an extremely long time to start up after being shut down

When I try to start up my computer it takes between 3-5 mintues to start back up again.
MBP 15"
Purchased in Ocotber of 2011
Any ideas?

There are probably a lot of items being started when the computer does. You can open up "System Preferences", click on "Users & Groups", and then click on "Login Items" for a particular user. If you don't see anything suspicious, or anything that can cause long startup issues, navigate to (by pressing shift-command-G when in Finder, and yes, the ~ is necessary):
~/Library/LaunchAgents (can also get here by typing /Users/<account name>/Library)
/Library/LaunchAgents
/Library/LanuchDaemons
/Library/StartupItems
/System/LaunchAgents
/System/LaunchDaemons
/System/StartupItems
If you don't see anything in there that would cause the "long" boot up time, then it is most likely something else (obviously...). If you have FileVault2 enabled, causing your entire hard drive to be enabled for Full Disk Encryption, that might increase the boot up time by a small amount. If you feel that your computer still is booting up way too slowly for your liking, then there could be some helpful indications during bootup. The next time you startup your mac, hold down the Command+V buttons on your keyboard, and you will see lines of text rather than your usual grey screen with the Apple logo

Windows 8 (Stream 7) reacts like power button is being held down

So I just got home from work and sat down to browse some web sites and eat. When I was done I hit the sleep button but shortly after the screen went out, windows came back with the slide down to shut down slider.
It just sat there waiting for input, I would slide it up (no) and then hit the sleep button again only for it to wake up again asking me if I want to shut down. At first I thought the power button broke, I even shut down the tablet and started it again and it still did it. I would put it to sleep and it would wake up asking me to slide the lock screen to shut down.
Now the thing is... if the power button really WAS stuck.. 3 things would happen;
#1 as per Bios software these days, holding the power button for more then 10 seconds is a universal "power down" command. Especialy on devices like these where the battery can't be disconnected. This power down command is almost allways part of the hardware so that it works incase of software failure.
#2 pressing the stuck power button when the tablet was on wouldn't put it to sleep.
#3 the tablet would be powering back on when powered off.
Now the thing is, this issue is NOT HAPPENING NOW! As if related some how, during the 15 or so minutes this happened, when I booted the tablet up holding it in portrait orientation the HP logo was correct but the windows lock and password screen were stuck in landscape mode. If I rotated the tablet to landscape and back at the lock screen it would fix itself, but during this issue it seemed like the orientation of the tablet was not being acknowledged correctly during the boot sequence and the lock screen would be oriented wrong. I some how fixed it by telling the tablet to reboot from the logon screen at which point it got stuck on the shutting down screen and I had to do a hard power down. After booting up once more all was well.
So.. as much as it seemed like a button failure, it really looks like there was a software glitch somewhere, either the bios or windows. I was unable to find anyone having a simular issue with windows tablets.

Didn't find a cause, but found the solution. It has nothing to do with diagnostics or anything, but rather doing a hard reboot. You see by default the tablet is configured to fast boot. What this means is when we shut down, a small hibernation file is written for the drivers and kernal (but not the user logon and data). So we never actually shut down, we log out and then hybernate.
So when the glitch pops up, even if we shut down, we arn't shutting down. We don't truly reset windows unless we RESTART, or do a hard shut down by holding the power switch which doesn't allow the computer to hybrnate. Both instances force windows to load from scratch.

Where clause one query not being pushed down

I am having a problem where I cannot get a certain "optional" parameter to be pushed down to a query. The parameter gets applied in memory after the result set is returned but not pushed down to the DB. The function is as follows:
declare function getFoo($key as xs:string, $optinalInput as xs:string*) as element(b:bar)*
for $foo in f:getFoo()
where $key = $foo/key
where not(exists($optinalInput)) or $foo/optional = $optinalInput<- does not get pushed down to the query
return $foo
If I make optinalInput an xs:string instead of xs:string * and the optional parameter will get pushed to the query. The problem is for this optional parameter I could get anywhere from 0-50 in the sequence. Seems like when the parameter is a sequence it doesn't get applied to the query. Is there any way around this?

Mike,
I understand the difference between * and ? and I was one of the people working on the "string-length not getting pushed" problem so I am very familiar with it. I tried you solution that you mentioned below and it still did not push the where clause to the query. I know I could achieve this with an ad-hoc query but I wanted to do a pure xquery implementation of this component because of the benefits it could have when interacting with other components in our ODSI project...such as SQL joining and potentially pushing additional where clause down from components that call this component. The only way I did get this to kind of work is to do this:
return
for $o in $optinalInput
for $foo in f:getFoo()
where $key = $foo/key
where $o = $foo/optional
return
$foo
for $count in 1
where not(exists($optinalInput))
for $foo in f:getFoo()
where $key = $foo/key
return
$foo
By putting the optional parameter into a FOR statement above the table call it guarantees that at least one will exists and that's why the optional parameter gets pushed properly to the DB with a parameterized query. The problem with this is that even though a parameterized query gets pushed it will call the SQL statement multiple times!...not good.
Another solution that was suggested to me would be to create the number of sequences for each item in the sequence and treat each item as it's own. For example if you know that the schema limits the sequence from 0..50 then you could make 50 items and 50 where clauses....probably not an optimal solution either but it would achieve properly pushing the where clause tot he DB.
For now I am satisfied with this optional parameter not being pushed to the DB because the performance was still good but it would be nice if there was a maintainable pure xquery solution to this problem.
Thanks for the help it's always appreciated!
Mike

Content being pushed down the page

I have a two column site that I am working on and the content on the right side is being pushed way down the page when it is published. Has anyone had this happen? you can see what I am talking about at Home
Thanks for any assistance!

It is lined up now because I was messing with it last night. I have scripts and custom HTML Widgets that go down the left column that I removed when I add them back it pushes the content on the right below when published. I will put a screen shot in this post tonight when I have a chance.
Thanks for the help!

Work Flow Notification Mailers Down

Hi,
I my OAM Dashboard I see that Work Flow Notification Mailers service is always down.
I ask the functional people if they need the Work Flow Notification Mailer. They said they do not need it.
Is it OK if the let it inactive? or It is mandatory that as DBA I should set it up even if the functional consultant
does not need it.
Thanks a lot
Ms K

Thanks again hel,
If I do not configure our Work Flow Notification Mailer, how do I stop the workflow to send mail? I am confused
why I have "unsent workflow E-mail = 7736 . Where can I retrieve this unsent e-mail , and delete them so I start
with 0.
Navigation OAM > OAM Dashboard > Performance > Activity
Forms Sessions            0
Database Sessions    107
Running Con. Req.      1
Service Processes       46
Services Up               17
Services Down            1
Unsent Workflow E-Mail 7736Thanks again

Extended flows being torn down?

Similar Messages

Maybe you are looking for