Extended Partition in Vista and C drive

My C drive is to small and I need to expand it but every time I try to remove some space from my D partition on the same drive I can't expanded it. The D drive is in side a extended partition. I have Google every thing and tried many things to fix this but it wont work.
Please help
Thanks

Did you get a solution to this as i have the same ptroblem?

Similar Messages

Why is the hard disk split into two data partitions (C:Vista and E:Data)?

I've just switched on a new A200-1V0 and found that the disk space is split into two equal sized partitions "C:Vista" and "E:Data" (and a small EISA one).
WHY? What is the logic and purpose? It's not even as if the the C:Vista partition is smaller and intended solely for "system" stuff as the the "Users" (User Documents) root is on it too.
Is this the default for Vista (my first use of it), if not, who said Toshiba could do this without asking me?
How do I move the "Users" root in Vista (to the Data partition) - if I've got two partitions I might as well use it?
Can I resize partitions in Vista without a 3rd-party utility (or a complete backup/restore)?
Thanks

Hello Just YOU
Please do not be upset because there is no reason for that. You have bought new product with factory settings. Toshiba and any other hardware manufacturer do not know each customer personally and, unfortunately, it was not possible to ask YOU how to configure YOUR notebook.
Because of that there is Product Recovery media that allows you to configure HDD according to your wishes and needs.
Please use this DVD and install OS how you want to have it. When recovery procedure starts you will see SETUP option on the right side. Click on it and choose the right option.
Install OS again and enjoy your life. I really do not have time to write about vantages of two partitions because it is basic stuff and you probably do not want to loose your time reading this.
Bye and good luck!

Windows Vista and No Driver Software for Tungsten E2

I have had my Palm Tungsten E2 for a few months. It works fine and did perfectly well with the Windows XP operating system. Recently I changed computers and have Windows Vista. I installed the program from the CD and then was alerted to go to the website to get the newest version to function with Vista. After doing all of this my Palm will not sync with the computer for it states that I need the driver software installed so that it can function appropriately.
I have done searches on teh computer and online looking for this "software" and it is nowhere to be seeen. Is it part of the Palm Desktop software? Is there a special place it is hiding? I followed the instructions on the Palm site regarding where to find the software manually, but could not come across it.
Any assistance would be greatly appreciated. Thank you.
Post relates to: Tungsten E2

So you have Palm desktop 6.2? Go to help-about in Palm desktop and look for the version number.
The driver is part of Palm desktop.
You can try this method to see if you can load the driver.
Open device manager on your computer by right clicking on computer, go to properties, hardware and then open device manager. Look under USB devices and see if there is an entry for Palm OS handheld. If you see it, right click on the entry, select uninstall driver. Disconnect the handheld and reconnect. Look at device manager and see if the handheld appears. IF it does then try and Hotsync again.
If it doesn't work, you will need to do a "clean" uninstall of Palm desktop and re-install.
Here are the instructions. Bypass the first step below regarding backing up your data, since you don't have any on the computer.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before create a hotsync name.
Post relates to: Palm i705

P6N DIAMOND CAN'T INSTALL VISTA NO MASS DRIVE FOUND

Trying to install Vista and no drive found to install OS. Using Sata Samsung Optical Drive and tring to install to a single Sata WD 150 Raptor. I installed Nraid dirver when prompted using USB and Vista still won't find the hard drive to install. Looking for any ideas. I can access the c: drive through DOS prompt and I formatted there but the Hard Drive is not available in the Vista install screen.
P6N diamond
EVGA 7950
WD 150 ADFD
Samsung SATA optical drive
2GB Corsair XMS2 DDR2 800
Seasonic M12 SS600

The HDD is on SATA 1 and the DVD is on SATA 4. The odd thing all this time it was showing in BIOS and I was able to access via command prompt. I did check the BIOS again and the on chip SATA mode was IDE. I had set the BIOS using the optimized defaults until the OS is loaded. I believe the OnChip SATA mode is IDE with that default, I checked it anyway and was set to IDE.
This AM I added the Floppy drive loaded the drivers on a floppy on another computer, booted into Vista and booted into Vista instal and the HDD was shown before I tried to load the drivers. What occurred to finally show up I have NO IDEA. Must be one of the unexplainable computer things. But I was finally able to install Vista and get it up and running!
Thanks for all the help and suggestions!

I am setting up a time machine backup to a external Hard drive. I want to backup by Mac book Pro running OSX 10.8.5. I would like to Partition the disk and use one partition for Time machine backups and the other for my Lightroom backups. How to do this?

I want to create a two partition disk. One partition for time machine, the other for Lightroom backup. Currently Time Machine is using the entire drive and it is doing the intial encryption and is about 29% complete after two days. I've decided that I want to turn encryption off and partition the disk. So I do I start over?

With the external drive attached, open Finder>Applications>Utilities>Disk Utility. Select the external drive from the list in the left side panel of the DU window. In the main window panel, click Partition in the buttons top center of that panel.
Select the number of partitions you want and adjust their sizes.
For the first partition, click to highlight the partition, then select the format, Mac OS Extended (Journaled) and then the partition table as GUID [both of those are the defaults]. Click Apply and it will ask to confirm and erase and format that partion...oh, give the partition a name, like Backup.
Then repeat those steps for the second partition..and remember to name it...something like Lightroom.
Close Disk Utilitty and you are ready to send TM to the one partition, and do your backup of Lightroom to the second partition.

Can i make (for example) 3 partitions on my external Hard Drive, and make different formatations for each, so i can share files of one of them in a pc and mac?

Hello ...
My name is Rui, i'm from Portugal ... (so please be patiente with my english, it can get a bit confusing)
so... first of all ... i have to say ... i'm still a pc user ... i don't have a Mac ... yet ... they are sold out right now in the shops near me ... i am waitting for them to arrive so i can pick up mine ... (i wish in a couple of days i will be entering the Mac world ....) ... i'll be picking the "entery" iMac model, the 21,5'', i5 with 500gb hard disk ... well .. i know it's the cheapest one (i hope it is a good machine tho) ... but it's my entering Mac world too (my only apple products till know were the ipod ...) ... one of my concerns are being the 500gb hard drive ... that for my pc experience is a little bit short ... that makes me a little scared (but paying 300e for the next model to have a 1tb disk, it's not a good option for me right now) ...
so..
I've been reading a lot about iMac's ans OS X so i can get familiar with this all new world ...
and i couldn't get any answer for some of my doubts... so i decided to ask you Mac Users ..
My idea is to have an external HD to store files (and not to fill the 500gb of the iMac) ... and i am wondering if it would be possible to make this ...
- make three partitions on the external Hard Drive and
- the first be formatted in Mac OS extended (journaled) mode
- the second on fat 32 - so i can store and share files with a mac or pc
- third be reserved for Time Machine
i wonder would that be possible... or would make sort of incompabilities ... would it work all well ?
hummm ...
I hope someone can help me with this ...
... if it is a silly question ... sorry ... but please remember, i've never had a Mac computer (i'm waiting for my 1st iMac to be available on store) ... so a lot of things are "flying" in my head right now ...
... and of course .. sorry for my english ... i hope you all understood me ...
thanks (obrigado) a lot for your patience...
Rui from Portugal

Hi! Dwagner, once again ...
I've just got my Mac last friday ... i'm still getting amazed with this new world to me ... eehe .. quite different ... but
... "i can do it, i can do it" eheeh
i'm in that period that a new question appears at almost every mouse click ... lol
so ... can you help me (once again) ..
you said you had your hard drive with this settings...
"You can partition for OSX (extended Journal) - read/write by only OSX or read only by Windows via BootCamp
You can partition for Windows (NTFS) - readable by only Windows
OR - you can format with ex-FAT and this is read/write capable for both operating systems."
how did you formated the partition in NTFS ? ... on the mac? using the "disk utility" ? or did you use another program to do so ...?
i hope i'm not "bugging" you ... this might be a silly question for most of people ... but right now ... it's a major question for me ... ehehe
once again Obrigado (Thank You)
Rui from Portugal

Upon Removing Ubuntu, How can I Extend the C and D Drive in Windows 7?

Upon Removing Ubuntu, How can I Extend the C and D Drive in Windows 7?
Previously, my Computer had Windows 7 and Ubuntu as a dual Boot. I followed some online instructions on how to Delete Grub (Ubuntu's Startup Boot Menu) and Ubuntu Partitions (<edited>) and it worked. I wanted to expand my remaining C and
D Partitions, but I couldn't figure out how to do it.
Windows 7's Disk Management shows my Laptop's only Disk divided into 3 logical drives ( i.e., the Recovery Drive, C, and D Drives). The Order of the Drives is Disk 0 is:
1.46 GB - Recovery Drive
53.71 GB - C Drive
42.79 GB - Free Space
191.19 GB - Drive for my Personal Data/Files
8.93 GB - Unallocated
NOTE: The Free Space and D Drive have a Green Box around them.
I would like to take the Free Space and Unallocated Space and apportion it between the C and D Drives., as stated prior, I'm not sure how to do this. Do you have any reliable and
preferably free options?

Hi Bobby Marlee,
Please share us a screenshot about disk management.
If my understanding is right, you want to extend the C and D drive by using the free space and unallocated space.
If you want to use Disk Management to extend the drive space, I think we need to back up the files and delete Free Space, Drive for my Personal Data/Files, and then extend C: drive and create D: drive by using the Unallocated space.
For more information, please refer to the following article.
http://technet.microsoft.com/zh-cn/library/cc771473.aspx#BKMK_WINUI
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

While partitioning in Lion 10.8, I get the following error message: I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message: DiskManagementTool has died

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

Installing arch on extended partition/logical drive

hi there. i am a newbie to linux and about to install arch as my first linux installation.
i am using vaio AR laptop already running xp and would like to keep it and have double boot without reinstalling xp.
have 200gb hdd with recovery primary partition, system primary partition (where xp installed) and extended partition with one logical drive (D: ) of 100gb.
i was considering deleting the logical drive (and the extended partition if necessary), which if i understand correctly should give me 100gb of unallocated space.
i would then like to install arch on the 100gb of unallocated space.
i would like to know if the way i am planning to go about it is possible, and whether i can install arch completely on one extended partition devided into logical drives.
any comments or sugestions would be much appreciated...
Last edited by o12357 (2009-09-04 12:45:18)

I believe that is correct. Grub has to have a reference to the md0 raid for booting.
Please see
http://bbs.archlinux.org/viewtopic.php?id=79306
This solution to the boot problem with md0 should be helpful for your case since grub must be modified to accomodate the raid.
I am not sure the data in your raid0 is appropo for your use in booting archlinux, however. If I understand correctly, it is windows related data and not applicable to linux.
If your raid0 is partitioned, it would be possible to establish a boot for each system using grub partition references differing for linux and windows systems.
Thus, you would have grub entries complete for linux and another set complete for windows.
I think AFAICT windows has to be first in the usual dual booting but am not an expert on that, not having used dual boot. It may be somewhat different when using raid for booting dual systems.
I suggest you read the wiki on dual boots.
Perhaps you will get advice from others on the subject also.
EDIT: Your asumption that all OS'es will recognize the raid0 devices as a single drive does not apply to archlinux which does not autodetect raid arrays but must have initramfs populated with the raid data established by mdadm and initiated into initramfs by mkinitcpio. Then during boot sequences , the array is assembled and enabled as a single drive,i.e., md0. The boot sequence assembles all drives having identical UUID's in the raid array.
Last edited by lilsirecho (2009-09-05 18:23:36)

Vista Ultimate on partitioned drive w Mac os works if vista on 2nd drive

yes that's how it is with my macpro.. a few months ago i had raid card so i had to install vista on separate drive which was placed in spare optical bay and hooked up via ipass to sata cable...i soon gave up on this cuz i wanted 2nd optical drive but i kept vista on the drive...now i have gotten rid of raid card and by accident was able to install vista on partition with mac os...but only with original vista drive in one of the bays... if i remove that drive and try to boot windows i get a "disc error" message and have to close...it's a real pain cuz i only have 4 drive bays and and vista is on a 250gb..drive...i imagine there is a boot initiation process that is buried in bios somewhere...does anyone know if i can make partioned vista boot without other drive in bay??

hi all...i just fixed it!! i noticed the partitioned drive didn't appear on mac desktop but the other boot drive did...so i ran disk utility and it showed it as not having a valid boot feature...so i booted w win disk, let it load and selected repair...i did this b4 with no luck but this time it came up with indication that "boot manager" was corrupt or missing...so i let it repair and now it works w out help from original boot drive...at least for now

ThinkVantage Active Protection for Windows XP, Vista, and 7 missing from driver matrix

Recently, while checking the Software link: http://support.lenovo.com/ca/en/documents/ht037696
I noticed:
Active Protection System
Like an airbag's sensor, it can detect sudden changes in motion and temporarily stop the hard drive to help protect your valuable data from some crashes that could occur due to everyday notebook accidents.
Windows 8 (32-bit), 7 (32-bit), Vista (32-bit), XP, 2000
12 Mar 2014
v1.79.0.3
Windows 8 (64-bit), 7 (64-bit), Vista (64-bit)
09 Mar 2014
v1.79.0.3
If you try to follow the links to the ThinkVantage Active Protection System, you are presented with a document labeled: ThinkVantage Active Protection System for Windows 8 (32-bit) - Laptop or a document labeled: ThinkVantage Active Protection System for Windows 8.1 (64-bit) – Notebook
No reference to Windows XP, VISTA or Windows 7 in the current version of the documents, yet the text file pointed to by the download links states that this driver still supports all the older ThinkPads and is applicable to Windows 7 and VISTA. The text file does say that Windows XP support has been withdrawn with this release, and that XP users should use the previous version. It does not, however, provide a link to any document or mechanism where an XP user can obtain the previous driver.
So, is the document correct, or is the text file correct?
Where is the current driver for VISTA and Windows 7?
When I went to the support sites to see the supporting documents there, I discovered that the ThinkVantage Active Protection entries were gone from the R61, R500 and T500 driver matrices. The only reference I could find to the ThinkVantage Active Protection System was in the above mentioned SOFTWARE link.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

Still no change to the driver matrices. ThinkVantage Active Protection is still missing. There has been a change in the web site, as follows:
Active Protection System
Like an airbag's sensor, it can detect sudden changes in motion and temporarily stop the hard drive to help protect your valuable data from some crashes that could occur due to everyday notebook accidents.
Windows 8.1 (32-bit)
27 Jan 2015
v1.80.3.0
Windows 8.1 (64-bit)
27 Jan 2015
v1.80.3.0
Windows 8 (32-bit)
27 Jan 2015
v1.80.3.0
Windows 8 (64-bit)
27 Jan 2015
v1.80.3.0
Windows 7 (32-bit)
27 Jan 2015
v1.80.3.0
Windows 7 (64-bit)
27 Jan 2015
v1.80.3.0
Windows Vista (32-bit)
27 Jan 2015
v1.80.3.0
Windows Vista (64-bit)
27 Jan 2015
v1.80.3.0
So now there are numerous separate entries, but none of them claim to support any 'legacy' machines. Most of the above entries point to the same driver (at present). The puzzling aspect to all this is that if you read the text documents that accompany most of the above driver packages, you will note that the text document claims that the driver supports quite a number of legacy machines. That information just never made it to the web page.
So do I manually update a driver because the text document says it is applicable to my legacy R500, or 'believe' the web page which states that only some current models are supported, but not the R500, T500 or R61.
Very inconsistant and highly unprofessional.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

T60 HDD res. partition, USB ports and DVD-RAM drive no longer recognizing data/media!

I have a base installation of the IBM T60.. I made no modifications to the setup or configuration of how the HDD is structured nor have I downloaded and installed any strange drivers... only automatically downloaded drivers from Microsoft update and manually downloaded driver updates from the Lenovo website.
One day everything was working fine. Next day, my USB devices, reserved partition (can't remember what this is called) and the DVD-RAM drive stopped working but power was still getting to these devices.
My DVD-RAM drive is seen as a DVD-RAM on first bootup. When I insert a CD or DVD media in the drive, the Explorer tree changes DVD-RAM to CD-ROM in the Explorer (really strange). It behaves like there is no media in the drive. Cannot boot with that drive either.
In addition, I have external USB HDD and Flash drives as well. None of them work on this T60 anymore.
When I plug in an external USB HDD or Flash drive, I get "not formatted" error message and a prompt to format my drives?!
I tested these USB external drives on a desktop machine and verified that they are working 100% fine. So the problem has something to do with my IBM/Lenovo T60.
It almost seems like something broke on the motherboard perhaps? I downloaded and installed the latest BIOS updates as well to no avail. Please help. Thanks in advance for your time and consideration of this issue.
Message Edited by bodmaster on 07-18-2008 09:51 PM
Message Edited by bodmaster on 07-18-2008 09:52 PM
Message Edited by bodmaster on 07-18-2008 09:52 PM

Anyone have any ideas? *praying*

I w system from OSX 10.5.8 to at least 10.6. Also my hard drive is partitioned for Mac and Windows (which I would like to remove). How should I upgrade?

I want to buy an Iphone 5 but need to upgrade my operating system from OSX 10.5.8 to at least 10.6.0. Also my hard drive is partitioned with Mac and Windows. How can I upgrade?

1. Click here and buy a Mac OS X 10.6 DVD.
2. Use the Boot Camp Assistant in the /Applications/Utilities/ folder to return the drive to a single partition setup.
(83003)

I have new hard drive in macbook pro(08) and have SATA cable with external power source to old hard drive (10.5.8)via. USB port and newer drive(10.6.8) will not recognize older drive..Do I need to partition newer drive with older disk to recover data?

I have new HD 750GB Hybrid in 2008 Macbook Pro 17" w/ Snow Leopard 10.6.8 connected to old Hard drive(250GB that had 10.5.8 on it at time of failure) via SATA cable to USB port with external power source.. Computer not acknowledging old HD at all in Disk Utility or otherwise (that I'm aware of)..Do I need to partition New HD and load old(10.5.8) onto partition to recognize older drive for data recovery? Thanks Wayno08

You do not need to load 10.5.8 onto your new drive in order for a 10.6.8 system to see the contents of a 10.5.8 system.
You might want to check out the hard drive troubleshooting bootk in the downloads section of this web site:
http://scsc-online.com
They also sell a product named Phoenix that can do OS extraction and volume copying/cloning, but to be honest I don't know if it's appropriate in this case.
I would suggest the following:
Open up Terminal.app (under utilities) and type "diskutil list" without the quotes. This is the command line version of Disk Utility. If the external drive doesn't show up at all, then it's likely not connected properly, not getting power, or just plain dead. If it shows up with only a devce name like disk0s16 but no volume it means the drive is seen, the OS just can't make sense of it.
Assuming the drive shows up, I would try to boot off the original installl disks for the system and run Disk Utility from that. I'm assuming the drive will show up. You'll want to select the option to repair the drive and then perform the option to repair the permissions.
If the unit isn't showing up, as per step 1, try a different USB port. More importantly with your unit, try it on another side of the unit if possible. If you read the book I referenced above, some of those units have I/O boards that are separated from the logic board. If the cable from the logic board to the I/O card goes bad or has problems, which isn't all that uncommon, some or all of the ports on the I/O card may appear to be bad as well. If you use a USB port on another side, it would be routing out of a completely different I/O path, so that's a potential problem.
If the drive is only seen with a device name such as disk0s16, it's likely either the index files are corrupt beyond Disk Utility's ability to see them. The only thing that I think would help would be a product named DIsk Warrior, but I can't guarantee that.
Disk Warrior can be found at:
http://www.alsoft.com/diskwarrior/
The company that I linked in the first link above also makes a product named Scannerz that does HD and system testing. The Scannerz/Disk Warrior combination make a good pair because the complement each other....Scannerz does what Disk Warriror can't and Disk Warrior does what Scannerz can't. However, at this point I'm not too sure getting a tool like Scannerz would be of much use because it sounds like the damage has already been done.
Let us know what happens.

Is it possible to have multiple partitions on my hard disk drive and use Bootcamp to install Windows?

Hi all,
Here is my question: I have MBP early 2011 and was trying to install Windows 8 using Bootcamp but the option to install Windows is grayed out so I can’t click the box next to “Install or Remove Windows 7.” Is this because I have multiple partition on my hard disk drive? Is there anyway I can install Windows 8 using Bootcamp without deleting my partitions on my hard disk?
Few more details:
Mountain Lion 10.8.2
Bootcamp 5.0.0
Thanks for your response

You can't create a Boot Camp partition on a drive you've already partitioned, and you can't install Windows 8 through Boot Camp at this time.
(71680)

Extended Partition in Vista and C drive

Similar Messages

Maybe you are looking for