Extended program check - The program ZZZ does not exist as a main program
Program ZZZ is the Include program of program AAA. I dont understand this error on Extended program check."The program ZZZ does not exist as a main program"
why are you runnign Code inspector the include program.You shoudl check only your main programs
Similar Messages
-
Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir LevyHi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support -
Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help
Welcome to the Apple community.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals. -
"The key 'LocalizedPerfCounter' does not exist in the appSettings" when creating Socket
Hi all,
Some time ago, I've installed the nuGet package for self-hosted signalR applications on a project. Today, I went to start a completely unrelated project, one that does not have that package (or any package at all), and has absolutely nothing to do with owin,
asp.net, signalR or anything else related to that package.
Now in this project, when I try to create a Socket, I get an InvalidOperationException: "The key 'LocalizedPerfCounter' does not exist in the appSettings".
The exception seems to be handled and the program proceeds, but it's annoying.
Also, I'm seriously concerned. Here I'm not trying to create some arcane ASP.NET thing that calls down into a dozen layers and six different configuration frameworks before actually getting to the TCP stack. I'm doing a plain straight new Socket(AddressFamily.InterNetwork,
SocketType.Stream, ProtocolType.Tcp).
How is it possible for a nuGet package that installs unrelated DLLs to another solution entirely to affect something that resides in the basic System.dll? What business does it have interfering with very low-level network calls?Hello Zappo,
For this InvalidOperationException, please check this hotfix to see if you are under those scenario:
http://support.microsoft.com/kb/2784156
>> How is it possible for a nuGet package that installs unrelated DLLs to another solution entirely to…
For this, since it is related with the NuGet, I suggest that you could post it to the NuGet forum,
https://nuget.codeplex.com/workitem/list/basic
The current forum is specifical for .NET Framework Class Libraries.
Discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection. Discuss and ask questions
about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection.
Thanks&Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The specified screen does not exist in the DLIB file
Dear Experts,
I have copied the program of VA01 to Zprogram and created ztransaction when I execute ztransaction it will goto first screen, after I type input and click enter I will get below message
Screen zsapmv45a 4470 does not exist
when I check help (F1) it says as follows
Diagnosis
The specified screen does not exist in the DLIB file.
Procedure
Specify the programm and the screen number correctly.
If you want to generate a list of existing screens, select the program
and screen number on the Screen Painter selection screen. In the case of
the screen number, you can only enter a * in the first position.
can anyone tell me that how to maintian screen in DLIB file?
Thanks in Advance...
VenkateshDo you have such a screen number under the function group where you have copied the transaction VA01?
If not chek in standard func group for this screen and copy it. -
Error :-The requested resource does not exist while opening the adobe form
hello Experts,
We are in Portal implementation face with ECC6 EHP4 and Portal EHP1
We have developed adobe form using HCM forms and processes and done the required configuration in SPRO
When we are trying to open the form from ESS we are getting below error
404 not found
The requested resource does not exist.
Please look into this issue and let us know any thing we are missing
Sincerely
Pareshis ADS working correctly?
1. Use transaction SA38 to execute the program FP_TEST_00.
Detailed information about this test program and about how you
should then proceed is given in the Adobe Document Services
Configuration Guide in the Help Portal under:
http://help.sap.com/saphelp_nw2004s/helpdata/en/37/504b8cbc2848a4
94facfdc09a359b1/frameset.htm -> Adobe Document Services
Configuration Guide -> Configuring the Web Service -> Securing
Access to the Web Service ->Configuration Check -> Configuration
Check for PDF-Based Forms in ABAP
- If the FP_TEST_00 form is displayed in the print preview, the
ADS configuration is correct.
-> If you use scenarios with an interactive PDF, proceed with
point 5. Otherwise, proceed with the test under point 6.
- If the system displays an error message instead of a form, the
configuration of ADS is incorrect.
-> Carry out the additional tests from point 2 onwards.
2. Use transaction SA38 to execute the program FP_PDF_TEST_00.
This enables you to check the RFC connection to ADS (see the
reference to the documentation given above).
- If the system displays the version number of ADS, the
configuration of the RFC connection is correct.
read the note 944221
Please paste the whole error? Is any dump in ST22 -
Problem in WAD (The requested query / does not exist on the current server)
Dear Guru's
When i execute a Web Application in WAD in the selection screen suppose if i give Key product as 86000 then check and execute i get correct data. Then if i come to backpage (Selection screen again using backspace) and change Key product as 86022 then check and execute then i get following error
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Can any one please provide me some good solution...
We are using BI 7.0 sp 16, But i am executing this Wed Application in 3.1WAD.
Thanks and Regards,
kalyanDear Jai,
Issue is in WAD selection screen for first product valuse every thing if fine, when i go back and change product value and then CHECK and EXECUTE the following error comes.
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Any one have any idea plssssssssssssssssssssssssssssssssssss..........
dude's some soln.....
Thanks and Regards,
Dev
Edited by: Srinivas dev on Jul 4, 2008 2:45 PM -
Alert Configuration : 404 Not Found The requested resource does not exist
Hi all ,
We are facing problem in Alert configuration and
Alert Inbox . We are on SP14 service patch
We are getting error as " 404 Not Found The requested
resource does not exist "
We have activated all the necessary services in
Tcode : SICF as mentioned in the config. guide
We have executed the program :
SXMB_ACTIVATE_ICF_SERVICES
We have referred the SAP note : 750287 and tried to
set the httpport as per the note but again we are
getting error as "The page cannot be displayed" .
We have checked the parameters in Exchange profile
for httpport as well as for host also .
Can someone please guide us on this .
Thanks
ShikhaHi all ,
Thanks for the replies .
Shravan ,
I pinged my XI and is working . we have already added
the IP Address and the host name , but the same error
is coming .
Anirban,
Checked all the necessary services again as suggested
by you .
Andreas ,
> is to set the abap profile parameter
LOCALHOSTFULL to the fqhn.
Can you please let me know where to set the abap
profile parameter "LOCALHOSTFULL" as suggested by you .
Thanks
Shikha -
The name "Pi" does not exist in the namespace "clr-namespace:PressureVessels".
Pi is the name of a class.
I made some major modification to the program in VS 2013, then after transferring the program to another PC with VS 2012 running, I am getting many errors that says:
The name "ClassName" does not exist in the namespace "clr-namespace:PressureVessels".Cleaning removes all the stuff out your bin.
If all this stuff is in the one solution then that's equivalent to manually deleting it.
If your app is composed from separate dll then I maybe some versioning issue.
If not and you can't reproduce the issue on your dev machine...
Tricky.
You would have mentioned it if you were putting stuff in the GAC.
Could be a sln or csproj issue.
They occasionally corrupt.
What else.
How did you get your code onto the other pc?
Is it contained within one folder with no external references beyond .net framework ones?
If you did something a bit dodgy with your references a dll might be coming from somewhere which is on your pc and not on this other one.
The only other advice I can think of is to step away for a bit and do something else.
It's all too easy to get into a flat spin when something drastic happens and one has no idea wtf is going on.
I used to be a points hound.
But I'm alright nooooooooooooooooooooooooooooOOOOOWWWW ! -
Why is there the error "The requested protocol does not exist comm:0" ?
Hi all,
I want to read data from a USB serial port of the mobile phone ( Alcatel OT-806D ). The cable connects the phone and the computer. The system running in the PC is Windows XP. I launch a java j2se program which writes a number to the usb serial port. And in my midlet I run a j2me which will read on the usb port. The problem is that the output displayed in the item on my midlet is "The requested protocol does not exist comm:0". So why there is this error , and how to correct it ?
Thank you very muchonly protocol required to be suppoted by a j2me mobile device is http://: some vendors to implement more protcols like socket:// but this depends on the vendor...
-
Object referred to by the object key, does not exist
I am trying to create a transport request for an Item Catagory & get the following error message :
Object R3TR TABU TVAPT, referred to by the object key, does not exist
Message no. TR600
Diagnosis
The object keys of the request/task cannot be edited because the object R3TR TABU TVAPT) which is referenced by the object key is not in the request, nor is it going to be added to the request.
System Response
The function terminates.
Procedure
If the error occurs in an application transaction, extend the missing object entry in the Transport organizer (SE09). If the error occurs again, contact the application hotline.Hi Nitin,
Please check this SAP Note <b>90799</b>.
Perhaps it will help.
Regards,
Ferry Lianto -
Bursting Problem - A file or directory in the path name does not exist
I'm trying to burst some data via email using the standard DocumentProcessor java code but receiving an error relating, I assume, to an invalid temporary directory. I've checked that the directory exists, as do the data file and control file. By the way I am not running in Apps, just stand alone mode. Any ideas would be much appreciated.
[042308_104249440][oracle.apps.xdo.batch.bursting.FileHandler][EXCEPTION] java.io.FileNotFoundException: /u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp (A file or directory in the path name does not exist.)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:205)
at java.io.FileOutputStream.<init>(FileOutputStream.java:96)
at oracle.apps.xdo.template.RTFProcessor.setOutput(Unknown Source)
at oracle.apps.xdo.batch.bursting.FileHandler.rtf2xsl(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.getXSLFile(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.processTemplate(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessCoreDocument.processLayout(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.globalDataEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingConfigParser(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.batch.DocumentProcessor.process(Unknown Source)
at PIreportburst.bEngine(PIreportburst.java:24)
at PIreportburst.main(PIreportburst.java:51)
-Below is the java code I'm using
public void bEngine(String ctrlFile, String dataFile, String tmpDir) {
try {
DocumentProcessor dp = new DocumentProcessor(ctrlFile,dataFile,tmpDir);
dp.process();
catch (Exception e) {
System.out.println(e);
}Thanks Ike
Where do you suggest setting the temp directory:
DocumentProcessor("control.xml","data.xml","/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp")
or in the xdo.cfg:
<property name="system-temp-dir">/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp</property>
..and thanks for the link to the BIPublisherIDE
Cheers, Mike -
Error 1075: The dependency service does not exist or has been marked for deletion
Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support -
[nQSError: 59014] The requested column does not exist in this table.
Hi
As you know this error has been discussed in other threads.. the difference in mine is that not only the time series measures but all the columns are giving me the error...none of the columns are being displayed... The rpd has no consistency errors. can anyone suggest what may be going on?
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59014] The requested column does not exist in this table. (HY000)
SQL Issued: SELECT column1 saw_0 FROM Paint3 ORDER BY saw_0
Thank you
mm58I guess you have the column in RPD, and it is available for queries.
are you using any time measures? if so check you chronological keys. -
Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advancedIn which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
HT1911 after purchase fraud my apple ID was disabled from iphone, how do i restore
After an unauthorized purchase on itunes was resolved (through paypal) and my phone was updated (3g) my appleID was disabled on my iphone. I can get it on my mac which makes me think it's something wrong with my phone. I believe this all happened whe
-
HP mini 1151nr reboot and select proper device message
I am wanting to reformat my HP mini laptop with windows 7 but this select proper device message is not allowing me to. I have the operating system disk but my laptop is not recognizing the hard drive. I go to diagnostics in the bios setup and it indi
-
I have PS Elements 10 with a serial
I have PS elements from 2008 and bought a new computer. Downloaded Elements 10 and can't get my serial # to work. any ideas!
-
The tool bar is missing for font,size and color for lettering in elements 9
Iam missing tool bar for font, style and size and color. where is it?
-
Definition of SAP-User(Developer, Professional, Limited, ess)
Hi, I'm looking for a definition of the different SAP-User (developer, professional, limited professional and ess). Can anyone give me a link where i can find it? Thanks. Regards, Dieter