Extended Program Chek
Hi gurus,
Can anybody pls tell me breifly about slin or extended program check.
Thanks in Advance.
Moderator message : Search for available information, thread locked.
Edited by: Vinod Kumar on Mar 8, 2012 2:09 PM
Hi,
This is FM for extended program checking. Description of implemented tests when making the test selection.
This same same as the extended program check of the SE38 program.
Open any program in ABAP editor.
Goto program->check->extended program check.
Select the check boxes and execute. It displays all the error and warning of the selected crieteria. Now you can check all these error conditions. The FM is for achieving the same functionality
Hope this helps.
Regards,
Richa
Similar Messages
-
Select query gives error in Code inspector and extended program check
Hi,
I have a query .
SELECT pernr
FROM pa9100
INTO TABLE t_nca_tab
WHERE endda EQ c_date AND
z_nca_required EQ c_yes.
This query gives me an error in Code inspector like :
Large table pa0001: No first field of table index in WHERE condition
I have one more query that gives error in extended program check
SELECT SINGLE stell ename
INTO (g_stell, g_name)
FROM pa0001
WHERE pernr EQ wa_nca_tab-pernr AND
endda EQ c_date.
The warning says:
*In "SELECT SINGLE ...", the WHERE condition for the key field "SEQNR" does not
test for equality. Therefore, the single record in question may not be unique.*
Its too urgent.
Please reply.
Regards,
Binay.The first field is PERNR .. so if UR not giving pernr it will fetch
all the data from the said table and between the given dates ..
Check if this is your requirement ...
write the select as ...
where r_pernr is a range ...
SELECT pernr
FROM pa9100
INTO TABLE t_nca_tab
WHERE pernr in r_pernr <----
endda EQ c_date AND
z_nca_required EQ c_yes.
As UR using select single it's expecting to use all the key
fields in the where condition ...
U can ignore this warning message -
Error in extended program check
Hi,
I m getting following error in Extended Program Check..
<b>The current ABAP command is obsolete
Tables with headers are no longer supported in the OO context.</b>
for the below declaration..
<b>data: I_fieldcatalog type slis_t_fieldcat_alv WITH HEADER LINE .</b>
could anyone help me.
Thanks in advance.Hi,
Use as follows
<b>DATA: I_fieldcatalog type slis_t_fieldcat_alv,
wa_fieldcaalog like line of I_fieldcatalog.</b>
When you use HEADERLINE you will get one WOrkarea and an intenral table with one declaration.
In your case I_fieldcatalog is a workarea and I_fieldcatalog[ ] is the table.
This usage is obsolete as it leads to confustion with CLEAR.
When you use CLEAR I_fieldcatalog you may assume that table is cleared but here only workarea is cleared.
So you need to use the above given declaration and change all your
APPEND I_fieldcatalog. to
APPEND wa_fieldcatalog toI_fieldcatalog.
simlarly for INSERT and MODIFY.
Regards,
Sesh. -
Extended Program check for internal table
TYPES:BEGIN OF TY_FINAL,
VBELN TYPE VBAP-VBELN,
VBELV TYPE VBAP-VBELV,
POSNV TYPE VBAP-POSNV,
WERKS TYPE VBAP-WERKS,
ZZ_MODEL_NO TYPE VBAP-ZZ_MODEL_NO,
VKORG TYPE VBAK-VKORG,
TEXT(70) TYPE C,
END OF TY_FINAL.
Declaration of Variables *
DATA: IT_VBAK TYPE STANDARD TABLE OF TY_VBAK ,
IT_VBAP TYPE STANDARD TABLE OF TY_VBAP ,
IT_FINAL TYPE STANDARD TABLE OF TY_FINAL WITH HEADER LINE.
DATA: W_VBAK TYPE TY_VBAK ,
W_VBAP TYPE TY_VBAP ,
W_FINAL TYPE TY_FINAL ,
W_LAYOUT TYPE SLIS_LAYOUT_ALV ,
W_VARIANT_SAVE TYPE C ,
W_REPID TYPE SY-REPID .
In the above code i have declared IT_FINAL TYPE STANDARD TABLE OF TY_FINAL WITH HEADER LINE. in extended program check iam getting error as( Tables with headers are no longer supported in the OO context.
can any one plz suggest me to avoid this error.
Thanks in Advance.
Moderator message - Duplicate post locked
Edited by: Rob Burbank on May 19, 2009 9:12 AMHi,
DATA: IT_VBAK TYPE STANDARD TABLE OF TY_VBAK ,
IT_VBAP TYPE STANDARD TABLE OF TY_VBAP ,
" If you declare the internal table with header line in OO context it wll give you error. As OO wil not
" support the header line concept. Declare Internal table without header line and create the work area
" for the internal table
IT_FINAL TYPE STANDARD TABLE OF TY_FINAL. " WITH HEADER LINE.
DATA: W_VBAK TYPE TY_VBAK ,
W_VBAP TYPE TY_VBAP ,
W_FINAL TYPE TY_FINAL , " Use this work area
W_LAYOUT TYPE SLIS_LAYOUT_ALV ,
W_VARIANT_SAVE TYPE C ,
W_REPID TYPE SY-REPID -
Extended program check ( sapslin prog)
Hi,
i have one requirement, in extended program check for checking the text elements,(chracter -strings).
There is a sap standard programavailabel. ( Code slin,function pool sapslin) , if i am checking EPC for my z program ,the sapling is not comparing the text elements and text literals character by character,It is checking whether the text element is created or not.(for example if i created a text literal as "cat" and for that if i created text element as "ca". ) then also the EPC (sapslin) is not identifying that error.
please guide me with the proper code.REPORT ZTEXT_ELEMENTS_CHECK .
include <icon>.
PARAMETERS : P_TEXT(40) TYPE C.
TYPES : BEGIN OF TY_RESULT,
id type c,
key(3) type c,
ENTRY TYPE STRING,
STATUS TYPE C,
END OF TY_RESULT.
DATA : LEN TYPE I,
POS TYPE I,
ACTLEN TYPE I,
COMPLEN TYPE I,
count type i,
STR TYPE STRING.
DATA : BEGIN OF TY_PROG.
INCLUDE STRUCTURE ABAPTEXT.
DATA : END OF TY_PROG.
data : i_data type table of abaptext with header line.
DATA : I_PROGRAM TYPE TABLE OF ABAPTEXT WITH HEADER LINE.
DATA : I_TEXTELEMENT TYPE TABLE OF TEXTPOOL WITH HEADER LINE.
DATA : I_RESULT TYPE TABLE OF TY_RESULT WITH HEADER LINE.
READ REPORT P_TEXT INTO I_data.
READ TEXTPOOL P_TEXT INTO I_TEXTELEMENT LANGUAGE SY-LANGU.
break-point.
loop at i_data.
if I_data-LINE cp '00'.
i_program-line = i_data-line.
append i_program.
endif.
endloop.
LOOP AT I_TEXTELEMENT.
LOOP AT I_PROGRAM.
SEARCH I_PROGRAM-LINE FOR I_TEXTELEMENT-ENTRY.
IF SY-SUBRC EQ 0.
LEN = STRLEN( I_TEXTELEMENT-ENTRY ) + 1.
POS = SY-FDPOS.
STR = I_PROGRAM+POS(LEN).
SHIFT STR RIGHT DELETING TRAILING ''''.
CONDENSE STR NO-GAPS.
ACTLEN = STRLEN( I_TEXTELEMENT-ENTRY ).
COMPLEN = STRLEN( STR ).
IF ACTLEN = COMPLEN.
I_RESULT-ENTRY = I_TEXTELEMENT-ENTRY.
I_RESULT-STATUS = 'T'.
APPEND I_RESULT.
ENDIF.
ENDIF.
ENDLOOP.
ENDLOOP.
loop at i_result.
loop at i_textelement where entry = i_result-entry or id = ''.
i_result-id = i_textelement-id.
i_result-key = i_textelement-key.
modify i_result from i_result.
endloop.
endloop.
loop at i_textelement where id = 'I'.
clear count.
loop at i_result where key = i_textelement-key.
count = 1.
endloop.
if count = 0.
i_result-id = i_textelement-id.
i_result-key = i_textelement-key.
i_result-entry = i_textelement-entry.
i_result-status = 'F'.
append i_result.
endif.
endloop.
LOOP AT I_RESULT.
if i_result-status = 'F'.
WRITE : /3 I_RESULT-id, 15 I_RESULT-key,
30 I_RESULT-ENTRY, 40 I_RESULT-STATUS,ICON_INCOMPLETE AS ICON
endif.
ENDLOOP.
Hope it is useful.
Please reward. -
Hi ,
I'm getting errors(Obsolete statements) when checking for extended program check for a report program.
When I'm going for "UCCHECK" i'm not getting any errors & in code inspector also it is not showing the errors.
Here what is the reason for this?why it showing error in one transaction & not showing the same in other transaction..
Here I'm pasting the code..
REPORT ZHCM_OBSOLETE.
infotypes : 0000.
DATA: BEGIN OF itab1 OCCURS 0,
col1 TYPE i,
col2 TYPE i,
col3 TYPE string,
END OF itab1 VALID BETWEEN col1 AND col2.
DATA: BEGIN OF itab2 OCCURS 0,
col1 TYPE i,
col2 TYPE i,
col3 TYPE string,
END OF itab2 VALID BETWEEN col1 AND col2.
itab1-col1 = 1.
itab1-col2 = 6.
itab1-col3 = 'Itab1 Int1'.
APPEND itab1 TO itab1.
itab1-col1 = 9.
itab1-col2 = 12.
itab1-col3 = 'Itab1 Int2'.
APPEND itab1 TO itab1.
itab2-col1 = 4.
itab2-col2 = 11.
itab2-col3 = 'Itab2 Int1'.
APPEND itab2 TO itab2.
provide col3 FROM itab1
col3 FROM itab2
BETWEEN 2 AND 14.
WRITE: / itab1-col1.
* \, itab1-col2, itab1-col3, itab1_valid.
WRITE: / itab2-col1.
* , itab2-col2, itab2-col3, itab2_valid.
SKIP.
ENDPROVIDE.
Thanks in advance..
Pradeepa
Code Formatted by: Alvaro Tejada Galindo on Jan 7, 2009 2:22 PMHi,
You are probably getting obsolete statements on the declaration of internal tables. Avoid using begin of itab occurs 0, this statement is not used as it automatically creates a header line. Use types statement to define a type and then use it to create an internal table and workarea, this will remove the obsolete statements in extended program check.
types : begin of t_itab,
col1 type i,
col2 type i,
col3 type string,
end of t_itab.
data itab type table of t_itab
data wa_type t_itab.
Use these to populate your internal table.
begin of itab occurs 0 was a statement which was used in prior versions (<4.0) and now are considered obsolete, but still functional due to backward compatibility.
Hope this helps you.
Regards,
Sachin Dargan.
Code Formatted by: Alvaro Tejada Galindo on Jan 7, 2009 2:22 PM -
Error at new statement on extended program check need help
Hi all ,
This is the code :
LOOP AT i_stocks INTO wa_stocks WHERE NOT pulkt IS INITIAL AND
NOT bstkt IS INITIAL AND
NOT fprctr IS INITIAL AND
( write_off_fix <> 0 OR
write_off_pup <> 0 ).
AT NEW fprctr.
CLEAR: l_prctrsum_fix, l_prctrsum_pup.
ENDAT.
IF wa_stocks-bukrs <> lastbukrs.
lastbukrs = wa_stocks-bukrs.
PERFORM document_header USING xreversal.
i_counter = 1.
CLEAR lastkostl.
ENDIF.
ADD wa_stocks-write_off_pup TO l_prctrsum_pup.
ENDLOOP
On Extended program check its says :
The LOOP statement processing will be limited
(FROM, TO and WHERE additions in LOOP)
Interaction with group change processing (AT NEW, ...) is undefined
(The message can be hidden with "#EC *)
It means at statement AT NEW fprctr .
Need help , How can i resolve this error ?
Regards .
Edited by: ujjwal dharmak on Feb 19, 2010 9:55 AM
Moderator message - Moved to the correct forum
Edited by: Rob Burbank on Feb 19, 2010 9:04 AMSince you are using where condition in loop statement and also using the control break statement thats why it is showing the error for you.
So if you want you can do like this
loop at itab into wa.
if not wa-f1 is initial ....<and other conditions>.
continue.
endif.
at new f1.
endat.
endloop.
It will resolve your problem but I am having the doubt how the at new will work properly...
Regards
Shiba Prasad Dutta -
Code Inspector and Extended program check in one program
Hello SAP gurus,
We have a requirement where we need to create one tool which will have both code inspector and extended program check functionality and report should display all error, warning messages which are found from these checks.
Can anyone provide some suggestions on this?
Thanks,
Khushboo DandHi,
Go to Se38 and check how code inpsector and extended syntax check. I dont remember the exact function module name but just debug a little u will be able to find it.
Nabheet -
Structure Enhancement Error Error in Extended Program Check in ECC 6.0
Hi Experts,
I am working on ECC 6.0 I am a structure like "BAPIACWT09" , "BAPIACCAIT" in my program when i run Extended Program Check i am getting an error
<b>
"BAPIACWT09" can be enhanced. After a structure enhancement, the semantics of the parameter transfer may change.</b>
How to eliminate this ErrorRaghu,
Every structure has to be created with an enhancement category.
In Transaction SE11, when you are creating a structure or a table , go to extras - enhancement category to see it.
I guess BAPIACWT09 has been defined with a category of can be enhanced, and SAP is warning you that if the enhancement is used in the future your program can have syntax errors.
There is nothing you can do about this. If you find out something, Please share. -
Extended Program Check - Multiple Programs
Hi All,
I am looking for a program or utility, where I would be able to do EXTENDED PROGRAM CHECK with multiple programs at the same time.
Let me know if anybody has come across the same.
Thanks,
Mayankwell there is a way..
code inspector
goto SCI,
create a object, include all the programs you want to check.
now create an inspection, in SCI or SCII, give this object you have created and execute with SAP default check variant. -
Extended Program Check - Warning
Hi SDNers,
I did my program well. but when i am doing Extended program check it shows warning that 'do not use fields, field symbols (itab) globally'. This is the only warning i can not eliminate it. i dont want to hide using "#EC NEEDED.
I have searched almost all the sites, finally i posted here.
Right answers will be highly Appreciated.
Thanks & Regards,
Senthil kumarHi All,
I also facing the same problem when doing an EPC check for my program.How can I overcome it.
Please suggest me.
This is the message appeared for me after doing the EPC check.
Do not use fields, field symbols (OBJ_DATA) globally.
The related code to get the above warning is:
START-OF-SELECTION.
DATA:obj_data TYPE REF TO lcl_local.
CREATE OBJECT obj_data.
Thanks In Advance.
Regards,
Chakradhar. -
Hi Folks,
When we do extended program check sometimes we come across obsolete statements as well as some other like error,info ,warnings msgs.In case if they are not going to effect the result then how to hide them.I heard that by giving #EC* we can hide them.
Can anyone of you please let me know how to do that?
Thanks,
K.KiranHi Kiran,
When you do the extended program check the warning message itself will give you what should be used to hide such messages.
What you have to do is goto those lines and place that particulat text at the last say,
* Here no hardcoded text is to be used. To avoid the warning you have to do this,
* In real ext syn check you will get exact vales that are to be used,
WRITE:/ 'Material Number:', v_matnr. "#EC*
Regards
Kathirvel -
Error while Extended Program Check
Dear All,
When I m cheking Extended Program Check for my program i m getting following warning error how can i clear it.
Not all supported date formats are handled
Check use of a generic service method or handle all formats
Regards
Balamurugan NHello,
Please check which date format is causing the Problem in your code and Try to use Standard function Modules like
CONVERT_DATE_FORMAT etc which suffice your Problem and later do check Extended Program check.
Please let us know, if you resolve by other ways.
Thanks ,
Sudheer. -
Extended program check - The program ZZZ does not exist as a main program
Program ZZZ is the Include program of program AAA. I dont understand this error on Extended program check."The program ZZZ does not exist as a main program"
why are you runnign Code inspector the include program.You shoudl check only your main programs
-
Extended Program Check results in Internal table
HI,
How to get the Extended program check results into an internal table .
Thanks in advance.
ManoharHi,
Try using function module EXTENDED_PROGRAM_CHECK
Make sure the import parameter TEST_ALL = 'X' (By default it is not checked
Regards
Maybe you are looking for
-
How do I transfer the songs from my desktop to my iPad using the same iTunes account? I can only sync the other way. Thanks
-
Hi all, I have a short little applescript that does some math and then outputs a mix of the results and plain text in tabular form, and copies it into a Word document. (I'm a complete novice at AS, this is maybe my third script). At present, the scri
-
Hello all, Does anyone can give me an idea, if possible, to integrate data managed by an external solution (program) in SAP Business One in an automatically way without SDK. I can do it by using DTW but it will make one user to be responsible to run
-
Error U44M1P7 with the Illustrator/photoshop/indesign update
Hello, I have an update problem for 6 months only with the Illustrator, photoshop and indesign last update. A popup appears and inform me about the fail of the update, the reason being that an "U44M1P7" error is occured. Could anyone help me to find
-
Cannot install sqldeveloper 64 bits on windows 7
I am trying to install SQL Developer on windows 7. I unzipped it under C:\program Files\sqldeveloper ok I run it as administrator it asks for the path to java.exe, so I provided it and I get Cannot Find J2SE SDK installed I searched and found that th