Extended Table Maintenance Events 05: Original line when copy entry?

Hello,
in the Extended Table Maintenance <b>Events 05</b> I want to <b>copy</b> my own tables. For that I need to know not only the newly created line, but also the original line which was the template for the copy.
I know this line is contained in table EXTRACT, but how do I identify it?
Is there an index pointing to the "old" line inside EXTRACT?
Is there a work area containing the old line?
I thought workarea EXTRACT contains the old line and <TABLE1> the new line, but debugging proofed that both are the same.
Any idea?
Best regards,
Cedric

Any body can help me?

Similar Messages

Extended Table Maintenance Events

Can any give me information regarding Extended Table Maintenance Events .
Thanks,
zia

Hi,
Check out these links...
/people/sudheer.cheedella/blog/2006/02/20/extracting-data-in-table-maintenance
maintenance view event
check this thread also..
Re: Maintenance View Events
Rgds,
Prakashsingh

Extended Table Maintenance Events - 22

Dear Friends,
I'm trying out writing the Event 22 - Go to Long Text Maintenance for Other Languages. I have written the code in the particular interface format:
FORM xxxxxxx USING M_MODE
CHANGING TEXT_WA MODIF.
After activating also it is not appearing in the table maintenance. Please suggest something.
Regards,
Deva.

Hi Divya,
whenever you attatch event in the table maintenace, you have to take care of the following points :
1. The table and the function group should be activated.
2. The form routine name should be the same what you entered in the column against the event number under the form routine ( t-code : se55).
I did attatch the event no. 22 and it is activated ..and i can see in my table maintenance.
Regards,
Kunal.

How to use the table maintenance events for validating the input entries..?

Hi,
I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
Or Is there any other way to solve my problem.
Please share your inputs. Thanks in advance.
Best regards,
paddu.

In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
Here is documentation for Event 01(Before Saving the Data in the Database )
Event 01: Before Saving the Data in the Database
Use
This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
hidden entry processing
fill hidden fields
flag data to be written to hidden tables after the database change.
To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
Realization
This event has no standard routine. The following global data is available for the realization of the user routine:
internal table TOTAL
field symbols
field symbols <ACTION> and <ACTION_TEXT>
<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
Regards,
Joy.

Table maintenance events

Hello,
Does anyone has a code example of table maintenance events?
I have a custom table ( zitab ) , with a maintenance view in SM30. I would like to use the table maintenance events for some authorisation check before the data is displayed, then, depending on the authorisation, display what the user is authorised to see. After data input, perform validation, if errors occur, inform the user what the problem is, if not, save in tha z table.
Can this be done in sm30 or I need to write a new program?
Thank you!

Can someone please explain me why I have this short dump (before save event)?
Error analysis
    The statement
      "MOVE src TO dst"
    requires the operands "dst" and "src" to be comvertible.
    Since this statement occurs in a Unicode program, the special
    convertibility rules for Unicode programs apply. In this case, the
    following rules have been broken:
Source Code Extract
Line SourceCde
    1 ----
    2 ***INCLUDE LYTableF04 .
    3 ----
    4
    5 form before_save.
    6
    7 DATA: l_field_is_blank.
    8   DATA: BEGIN OF s_ytable.
    9           INCLUDE STRUCTURE ytable.
   10           INCLUDE STRUCTURE vimtbflags.
   11   DATA: END OF s_ytable.
   12
   13   LOOP AT total.
   14     CLEAR s_ytable.
>>>>>     MOVE total TO s_table.
   16
   17   ENDLOOP.
   18
   19 endform.
In all examples that i read on this forum this code works, I don't know why it fails for me.

Issuing an Error in Table Maintenance Event

Hi,
How can I issue an error in the table maintenance event without exiting the screen.
When an event is triggered (Before Save), it will perform a check in the data changed or created. It will issue an error when the changes are not correct. But when I press enter or click on the check button, it will exit the table maintenance screen.
What do I have to do in order to issue an error but will still go back to the table maintenance view.
Making the message as information or type I, will not work because it will still save.

Hi,
I came to the same problem, maybe this will help someone.
You can move check into view cluster event.
1. load the view
     PERFORM vcl_set_table_access_for_obj
          USING 'view'
          CHANGING error_flag.
2. assing to structure
     LOOP AT <vcl_total> INTO ls_view
3. perform check, set VCL_STOP which will stop saving and will display message
     VCL_STOP = 'X'.
     MESSAGE ....

How to maintain original lines when converting a word file in a PDF

Unfortunately the table lines often change when converting a word file in a PDF, e.g. dotted/broken lines into straight lines or different kinds of broken lines. How can I maintain the original lines when converting the documents?
Many thanks in advance for your advice.
Li Li

Hello,
Ok, this is the background.
I’m a publisher. Any document to end user will go as pdf. And off course it preserves the word appearance. We ship our manuals only in pdf. At this point my end users have to copy the “CODES” into his editor to run the product. So when doing it, the “Codes” copied from pdf to his editor loses its format. Editor need not be the actual one; you can also test in a notepad.
P.S: You can find the difference by copying the code from word to notepad and pdf to notepad
Hope you now understood the purpose what I’m looking at for.

Problem with table maintenance event

Hi Experts,
In the table maintenance event 05 for a ztable, I have written logic to validate if few key fields and non key fields are not initial.
If they are initial,need to throw an error message and it has to stay in the same screen.But right now it grays out the non key field.
Tried the combination of events 01 and 05 it grays out the key field.
Please let me know if there are any ways to achieve this without making modifications in the PBO or PAI of the ztable.
Regards,
Sridevi

I have this exact problem, why is this thread 'closed'? Is there an answer provided somewhere?
I have found a topic which shows an information message, which claims that the data is not saved.
But it does save the data if you use an information message and blocks non-key fields when using an error message
so this problem is still open for me.
Does anybody have a solution?
Ah an answer was indeed provided in another topic:
Issuing an Error in Table Maintenance Event
Edited by: Arno ter Horst on May 5, 2011 4:12 PM

ABAP Table Maintenance Events

Hello All ,
I have created the Table Maintenance with Events .
When the user enter the sales order number & item in the Txn code screen of the table .The Event 05 triggers & pulls out information for Sales Order Customer ,Material ,Plant & show it in the screen .
There are two more fields for user input Valid to & Valid from , the user now fills in these fields & then press Save button in the screen .
Now He gets the Short dump related to duplicate entries .
I checked the standard code & it is trying to enter data into the Internal table
MOD_ELEM_TAB & since already the same entry exsist in this table so program dumps out .
Kindly suggest the way to solve this issue .
Best regards,
Anurag Goel .

Check with table primary keys and if you are creating same data again and again,
then you will get short dump..
so keep the validation like if record already exits then give message.
else you want to create same data again and again then create one more field and it is like count (keep as primary key ).
Reward Points if it is helpful
thanks
Seshu

Table maintenance events DUMP

Hello GURU's
i have a requirement to update the table tab1 entries into another table tab2 with user and date.
In detail, wen a user enter some thing in table tab1, the
table one shouls have these entries and also these entries should be updated in another table tab2 with two extra field user and date.
I have create a 01 maintenance event for tab1 'before save',
but I have this following dump. am doing this for the First time please suggest.
Short text
    Dynpro does not exist
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLYTEMP" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The system attempted to use dynpro 0003 in program "SAPLYTEMP".
    This dynpro does not exist.
Trigger Location of Runtime Error
    Program                                 SAPLYTEMP
    Include                                 LSVIMFX2
    Row                                     1.023
    Module type                             (FORM)
    Module Name                             PROCESS_DETAIL_SCREEN
Source Code Extract
ENDFORM.                    "naechster
*&      Form SET_MARK_ONLY
      Sets status flag if entry with index p_index is marked.
     -->P_index EXTRACT-index
FORM set_mark_only USING    p_index LIKE sy-tabix.
DATA: rc LIKE sy-subrc.
PERFORM check_marked USING p_index
                       CHANGING rc.
IF rc = 0.
    <status>-mark_only = 'X'.
ENDIF.
ENDFORM.                               " SET_MARK_ONLY
      FORM PROCESS_DETAIL_SCREEN                                    *
process detail screen call                                          *
---> MODE - C -> call mode (CALL SCREEN), S -> set mode (SET SCREEN)*
FORM process_detail_screen USING value(mode) TYPE c.
DATA: modulpool LIKE trdir-name,                          "#EC *
        no_input_happened(1) TYPE c,
        state_action(1) TYPE c.
IF detail NE '0000'.
    IF mode EQ 'S'.
      SET SCREEN detail.
>>>>   LEAVE SCREEN.
    ELSE.
      PERFORM vim_imp_call_screen USING detail.
    ENDIF.
      FORM VORIGER                                                  *
      NEXTLINE:   Index of current entry in table EXTRACT
      FIRSTLINE: EXTRACT-index of first line shown on list screen
      L:          Line number of list screen, where entry was chosen
                  via F2
      LOOPLINES: Number of step loop lines in list screen
FORM voriger.
DATA: rc LIKE sy-subrc, n TYPE i.

Hi,
Use this FM instead of Move statement.. In Unicode environments the left and right operands should be of same data type. to over come this you can use the below FM
   CALL FUNCTION 'HR_99S_COPY_STRUC1_STRUC2'
          EXPORTING
             P_STRUCT1       = total
        IMPORTING
             P_STRUCT2       = fs_zsdslsbud.

Table Maintenance events and field focus

Hi all,
In event 01(save data) of table maintenance, I have the code to ensure some fields are not left blank:
When testing the creation of table records in SM31, it gives me the error msg successfully, but after that greys out all fields in that row except the primary keys.
- My primary keys are already filled.
- The mandatory field that must be filled is not filled yet, but is greyed out after the error message is given.
How can I avoid this and set focus on the mandatory non-key field?
My code as follows:
***INCLUDE LZBUSICONNF03 .
FORM CHECKMANDATORYFIELDS.
IF ZPWHPO_INC-HPO_NAME IS INITIAL.
* Enter company code
MESSAGE e100(ZBUSICONN_MSGCLASS).
ENDIF.
* Validation of COMPANY_CODE
* IF TABLEN-company_code IS INITIAL.
ENDFORM.

Hello,
To check on not key fields, you can modify the "Maintenance screens". There you can use the logic as in any other dialog program and add you own check in a PAI module.
Rgds,
JP

Error in table maintenance event after save

Hi,
I would like to issue an error in table maintenace event without exiting the screen.
When I am going to save in table maintenace then i am getting error but at the same time it is exiting table maintenace screen. I want to stay on the same screen but only want to give error message. Please can you help me in this ?
Below is the code I have written in event:
    DATA lwa_row TYPE ztemp.
LOOP AT total.
    clear lwa_row.
    if <vim_total_struc> is ASSIGNED.
      MOVE-CORRESPONDING <vim_total_struc> to lwa_row.
    endif.
    if <action> NE 'D' and <action> is NOT INITIAL and <action> NE 'X'.
      if lwa_row-hkont = ''.
        MESSAGE 'Please enter GL?' TYPE 'E'.
        vim_abort_saving = 'X'.
      ELSEIF lwa_row-ind = ''.
        MESSAGE 'Please enter indicator?' TYPE 'E'.
        vim_abort_saving = 'X'.
      endif.
    endif.
ENDLOOP.
Many Thanks.

Hi,
What`s event you are using, '01' ?
And change your code to this: 'MESSAGE 'Please enter indicator?' TYPE 'S' DISPLAY LIKE 'E'.'?
regards,
Archer

Deleting Lines When Copying To AR Invoice

Hi All,
SAP Business One 2007 A SP01 PL05
I want to know is there a way when copying from a Sales Order to an AR Invoice to delete lines where there is no stock available?
For example I have a Sales Order with two lines on is for item one and I am ordering 10 and there is 20 in stock. Line two is for item two and I am ordering 10 and there is 0 in stock. Now when I copy to AR Invoice I want it to delete line two as there is no stock for that item.
Is this possible and if so could somebody tell me how?
Any help would be greatly appreciated.
Regards,
Quinn

Hi Quinn........
When you copy from SO to AR Invoice in between you get the Wizard where you can customize to select the items row wise and there you can enable InStock Column through Form Setting.
This way you can come to know the stock status of the item and there itself you can deselct the line......
Hope this will work.....
Regards,
Rahul

Short Dump in table maintenance events

Dear Experts,
I am getting a short dump when i am trying to maintain my Z table. the error is "The statement "MOVE src TO dst" requires that the operands "dst" and "src" are convertible. Since this statement is in a Unicode program, the special conversion rules for Unicode programs apply. In this case, these rules were violated.
the actual short dump is appearing at Move total to fs_zsdslsbud.
ZSDSLSBUD table has a NUMC, 4 char field but in total internal table it is appearing as 0000####. I guess this is the error. I tried to replicate the same code where there are only char type fields and i dont have any issues with below code.
My Z table also have a currency field. How to handle the unicode conversion in this case? can i use Try and Catch statements. A piece of code would be appriciated.
Thanks in advance.
FORM f_trigger_before_save.
DATA: wf_index TYPE sy-tabix. "Index to note the lines found
DATA: BEGIN OF fs_zsdslsbud.
          INCLUDE STRUCTURE zsdslsbud.
          INCLUDE STRUCTURE vimtbflags.
DATA: END OF fs_zsdslsbud.
LOOP AT total.
    IF <action> = neuer_eintrag .
      READ TABLE extract WITH KEY <vim_xtotal_key>.
      IF sy-subrc EQ 0.
        wf_index = sy-tabix.
      ELSE.
        CLEAR wf_index.
      ENDIF.
*      (make desired changes to the line total)
      MOVE total TO fs_zsdslsbud.
      fs_zsdslsbud-ernam = sy-uname.
      fs_zsdslsbud-erdat = sy-datum.
      fs_zsdslsbud-erzet = sy-uzeit.
      total = fs_zsdslsbud.
      MODIFY total.
      CHECK wf_index GT 0.
      extract = total.
      MODIFY extract INDEX wf_index.
    ELSEIF <action> = aendern.
      READ TABLE extract WITH KEY <vim_xtotal_key>.
      IF sy-subrc EQ 0.
        wf_index = sy-tabix.
      ELSE.
        CLEAR wf_index.
      ENDIF.
*      (make desired changes to the line total)
      MOVE total TO fs_zsdslsbud.
      fs_zsdslsbud-aenam = sy-uname.
      fs_zsdslsbud-aedat = sy-datum.
      fs_zsdslsbud-aezet = sy-uzeit.
      total = fs_zsdslsbud.
      MODIFY total.
      CHECK wf_index GT 0.
      extract = total.
      MODIFY extract INDEX wf_index.
    ENDIF.
ENDLOOP.
sy-subrc = 0.
ENDFORM.                    "f_trigger_before_save
Thanks,
Rajesh.

Hi,
Use this FM instead of Move statement.. In Unicode environments the left and right operands should be of same data type. to over come this you can use the below FM
   CALL FUNCTION 'HR_99S_COPY_STRUC1_STRUC2'
          EXPORTING
             P_STRUCT1       = total
        IMPORTING
             P_STRUCT2       = fs_zsdslsbud.

IPhoto '11 (9.1.3) moves duplicated photo AND original automatically when copy/paste into another event

I recently "upgraded" from 9.1.1 to 9.1.3 on OS X 10.6.8. I prefer an older version of iPhoto.
The main reason I "upgraded" was because I wanted to try to fix the issue that I have whenever syncing my iphone, which is that my iPhone would not use the "Make Key Photo" image that I selected in iPhoto as my main picture when scrolling through my albums/events in my iphone.
Since this upgrade, I'm having an issue whenever I duplicate an image in iPhoto and cut the image and paste the image into another event, the duplicated image will paste AND the original automatically transfers/pastes itself into the event. When I go back to the original event that I duplicated the image in, I notice that the original image is no longer there because it is now in the event that I cut and pasted the duplicate in.
I was trying to fix the key photo being my real key photo versus when my iPhone is synced it makes the first image in the event the key photo, but now I would like to also fix the original photo from automatically moving itself with the duplicated cut/paste photo issue.
How can this be resolved?

This post by Terence Devlin is an excellent treatise on organizing photos with iPhoto: Better way to organize my images?: Apple Support Communities
It's bound to give you good ideas on applying the concepts discussed to your own needs.
OT

Extended Table Maintenance Events 05: Original line when copy entry?

Similar Messages

Maybe you are looking for