Extended Transport Control (CTC=1) issue

Hello,
I have implemented extended transport control in our 3 system landscape.
After setting CTC=1 for quality system, I manually set the Target client for all requests.
However, now when any new request is released from Development system, I still have to manually set the target system for all requests as well.
I don't think this should be happening. It should automatically take the client as well.
Kindly help resolve this issue.
Thanks.

Check [http://help.sap.com/saphelp_nw04/helpdata/en/3d/ad5b814ebc11d182bf0000e829fbfe/content.htm]

Similar Messages

Problem in extended Transport control while setting up transport request.

I created a BDC program which will create a database table upon executing..
The problem is the program worked well since yesterday, But today when i executed it , it is showing a information message when creating a new transport request .
Extended transport control is not active:
Cannot specify target client
Since it s a recording ,and all the windows are processed using an OK CODE, this info box comes all of a sudden .I dont kno what went wrong , coz it was working fine the previous day.
i could not create a new workbench request even after ignoring that info message.
Pl suggest me what could be wrong.

This message has a long text, please read it.
Check with your system administrators, if they have changed anything regarding the transport process.
In addition, instead of using "fragile" recordings, try using function modules like DDIF_TABL_PUT.
Thomas

Extended Transport Control

I just implemented Extended Transport Control for my Transport Domain, which consists of DEV-100, DEV-111, QAS-200, QAS-220.
Now, it asks me to set the 'target client' for all the transports that are already imported.Without setting the target client for the entire import queue, it wont let me import any request.
My import queue consists of 500 odd requests that were imported prior to this, but they are still in the queue.
I need them in the queue for mass transport later on.
What target client should I set for them? Kindly advise.

Hi,
you said, you plan to do a mass import sometime. For this, i'd use the client, in which the transport are already imported as the target client.
But remember that all newly released transports will be send to both clients in QAS!. If you import only the newly exported transports to QAS-220, the older transport which might contain needed customizing for newer transports, are missing there.
You should think about the needs of your configuration again. And clean the buffer from time to time or schedule an periodic import-all on QAS.
Regards,
ulf
P.S.:
> So, suppose I set the target client as 200 for all of these 500 requests, would they be imported to QAS-200?
Yes
Edited by: Ulf Brinkmeier on Mar 3, 2009 11:48 AM

Extended Transport Control Usage??

Hello All,
"Extended Transport Control is another way to set up the Transport Route so that the route is system and CLIENT specific"..I m not able to understand this concept so unable to implement Extended Transport Control in my SAP Landscape.Please help me..Moreover I have one more doubt..
Suppose I release a change request in DEV Client 0XX it will not only automatically be added to the Import Queue for QAS but also 0X1, 0X2, of DEV If I implement Extended Transport Control..Is there any other utility of Extended Transport Control??

Some people complain exactly the same way about me, don't worry.
At least you have stopped points-gaming with Joydeep Gupta for sometime already and from your own frustration are now forced into trying it yourself and putting more effort in before you launch your questions, or at the least while you wait for an answer. You seemed to have even used the search now as well.
I think all this should be seen in a very positive light, considered as progress and is largely thanks to the efforts of Juan.
It might take you a while, but oneday you will hopefully thank us.
Cheers,
Julius

STMS Extended Transport Control

Anyone ever used the Extended Transport Control in STMS? The team at my current project wants to setup a client landscape like this (not the complete diagram)...
DEV100 >--+----+--> QA100 >-----> PROD100
          |    |
DEV110 <--+    +--> QA120
          |    |
DEV120 <--+    +--> QA121
               |
               +--> QA700
When a transport is released in DEV100, it will go to some of the clients in DEV and QA all the time, but in other clients it will be in a more controlled manner (e.g., on demand only).
I've always done multi-client transports at the o/s level using customized scripts etc to import into various clients, however since this client will be using ECC 5.00 and BW 3.5 (and Solution Manager 3.1) I'd like to get them setup from the start with the STMS functionality. It appears to me that I need to use the TMS Extended Transport Control, and I'm just wondering if anyone has a) any experience with it (both positive and negative), and b) any quick start-type information on how to configure TMS for a setup similar to the above.
Thanks in advance for any advice

I have created 3 following client ids.200, ids.300, and ids.400 in my IDES system with the SAP-USER profile.
Login to 000 client with SAP* user for the following configuration in the Transport Management System, STMS---go to Overview click on the Transport route, Your TMS configuration will be display in the center window if done.
Press F5 or click on Pencil Icon to switch to Configuration editing mode, Click on Edit menu then click on the Transport Target Group to define the multiple client of single or multiple system which exists in your landscape.
I will prefer to work on Hierarchical list Editor Mode instead of Graphic mode, to change from graphic mode to Hierarchical, go to setting menu click on transport route editor and select the Hierarchical List Editor Mode, setting will take effect to go to back and click on transport route again.
You have to Switch Editing mode before continue to define the consolidate route, go to Edit Menu, Transport Route and click on Create, Transport route window will display with the Consolidate / Deliver route options. Select the Consolidate Route and click on Extended Transport Control (F6) button down.
Integration system ..Will be your current or development system as source system
Transport LayerEnter the default layer which has been created with your integration system.
Consolidation TargetSelect your target group which created earlier.
Save the Configuration, activate and distribute the configuration across all systems.
Your system is ready to transport the requests to multiple systems and multiple clients
Regards
Anwer Waseem
SAP BAISS

Query regarding extended transport control

Hi All,
I read about extended transport control and I get very confused.What exactly it means.
I have a 3 clients in my DEV system xx0,xx1,xx2, only one in QA and one in PRD.
Now when searched I found..
'when you release a change request in DEV Client xx0
it will not only automatically be added to the Import Queue for QAS but also xx1,xx2 of DEV'.
We donot have extended transport configured but still I can see same number of request in the import
queue of all the 3 DEV clients.If the above is right then why is this happeing with my landscape or
have I missunderstood it?
We use Tcode SCC1 to copy client dependent request in other clients. So if an extended transport
is maintained, will that happen automatically?If not then how extended transport is useful.
Please share your ideas and help me.
Regards,
Ashutosh

Hi Sharath,
Thanks a lot for ttaking out your time to help me.You said
Mostly this kind of set up will be helpfull in scenarios where there are more than one
client in QA and PRD systems as becase if you release a request in development system and
if you are having three clients in QA systems, then you will transport the request in one client
and say if you need to have the same kind of changes in other two clients also then you need
to manually use SCC1 and copy the changes if extended tranport is not configured. If extended
transport management is configured then once you release the request in DEV then it will get
added to queue of all three clients in QUA and can be transported using STMS_IMPORT TCode
Thats what making me confused.
In dev we have 3 clients. We use SCC1 to copy the configuration to client xx1 and xx2 from client xx0.
    My doubt is if we have an extended transport,request will show up in the import queue off all the development client.
    So to have the same configuration we have to use STMS_IMPORT to import the request in xx1 and xx2 or SCC1.
    If that is the case then it means there is no use of extended transport control in setup where we have multiple clients
    in DEV server and only one one in Quality server and PRD server.As we will ultimately be using STMS_IMPORT (if extended
    transport is configured) or SCC1(if extended transport is not configured) to import the request in xx1 and xx2 of DEV server.
    Same goes for multiple clients in QA or PRD, as here also we can use STMS_IMPORT (if extended transport is configured)
    or SCC1(if extended transport is not configured) to import the request among different clients.Means I have to use one tcode,
     either STMS_IMPORT or SCC1, then how it is helpful?
Since your target QA and PRD are having only one clients then there is no need to worry about t
           his untill you are comfortable with copying the changes in other two clients of DEV system using SCC1.
    My doubt is if extended transport control is configured can the configurational changes doen in our DEV xx0 be automatically
    gets replicated in client xx1 and xx2?
   Request you all to please help me with your valuable suggetsions.
Regards,
Ashutosh

Transport control program tp ended with error code 0212 | URGENT

Hi All,
         We are trying to import requests in our PRD system. As soon as we select the request and try to import it , we get the error "Transport control program tp ended with error code 0212".
This is tp version 305.12.42 (release 46D) for ANY database
/usr/sap/trans/cofiles/K915883.<SID> for transport: <SID>K915883: Permissio
HALT 20070222114323
ERROR: /usr/sap/trans/cofiles/K915883.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 6878
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0212
Output from tools called by tp:
This is R3trans version 6.05 (release 46D - 18.10.01 - 11:30:00).
R3trans finished (0000).
When i checked the transport tool and rfc destinations, everything was successful.
When i tried to do tp connect -
23> tp connect <SID> pf=/usr/sap/tran/bin/TP_DOMAIN_<SID>.PFL
This is tp version 305.12.42 (release 46D) for ANY database
E-/usr/sap/tran/bin/TP_DOMAIN_<SID>.PFL could not be opened.
EXIT
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see SLOG for more details)
We are having SAP 4.6C with DB -Oracle and OS HP-UX.
Please let me know whow to rectifiy the issue. The situation here is getting worse.
Regards,
NK

Hi Ruchit, Sorry for the delay. Here is the file you wanted -
steic25q:root>ls
DOMAIN.CFG          TPPARAM.bak         TP_DOMAIN_ID1.PFL   TP_DOMAIN_IQ1.PFL
TMS_TEST.IS1        TPPRAMA0918         TP_DOMAIN_ID1.orig nik.dev_evt
TPPARAM             TP_DOMAIN_ID1.BAK   TP_DOMAIN_IP1.BAK
steic25q:root>more TP_DOMAIN_ID1.PFL
#TMS:0078:DOMAIN_ID1
Caution !
This file was generated by the Transport Management System.
Do not change this file using a text editor.
For more information, refer to the online documentation of the
Transaction STMS.
If this file was destroyed, it can be regenerated in the TMS.
To do this, log on to the domain controller (system ID1) and call
transaction STMS. In the System Overview, you can distribute the TMS
configuration. This regenerates the file.
STMS -> Overview -> Systems -> Extras -> Distribute TMS configugration
TRANSDIR            = /usr/sap/trans
DU1/CTC             = 1
DU1/DUMMY           = 1
DU1/NBUFFORM        = 1
DU1/TP_VERSION      = 266
DU2/CTC             = 1
DU2/DUMMY           = 1
DU2/NBUFFORM        = 1
DU2/TP_VERSION      = 266
ID1/CTC             = 0
ID1/DBHOST          = steic24q
ID1/DBLIBPATH       = /usr/sap/ID1/SYS/exe/run
ID1/DBNAME          = ID1
ID1/DBSWPATH        = /oracle/ID1/817_64
ID1/DBTYPE          = ora
ID1/NBUFFORM        = 1
ID1/TP_VERSION      = 266
IP1/CTC             = 0
IP1/DBHOST          = steic25q
IP1/DBLIBPATH       = /usr/sap/IP1/SYS/exe/run
IP1/DBNAME          = IP1
IP1/DBSWPATH        = /oracle/IP1/817_64
IP1/DBTYPE          = ora
IP1/NBUFFORM        = 1
IP1/TP_VERSION      = 266
IQ1/CTC             = 1
IQ1/DBHOST          = cbnysap2
IQ1/DBLIBPATH       = /usr/sap/IQ1/SYS/exe/run
IQ1/DBNAME          = IQ1
IQ1/DBSWPATH        = /oracle/IP1/817_64
IQ1/DBTYPE          = ora
IQ1/NBUFFORM        = 1
IQ1/TP_VERSION      = 266
TRN/CTC             = 1
TRN/DUMMY           = 1
TRN/NBUFFORM        = 1
TRN/TP_VERSION      = 266
steic25q:root>

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                       service: transport service
                                                                       start : online
                                                                       Function: TMS_TP_SHOW_BUFFER
                                                                       message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d       : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t       : Test. All database changes are rolled back.
-t4      : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v       : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x       : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

Test call of transport control program (tp) ended with return code 0232

Hi Gurus,
while releasing a request am facing this fallowing error :
Calling the transport control program tp
"tp EXPCHK SIDK901840 pf=
HOSTNAME\sapmnt\trans\bin\TP_DOMAIN_SID.PFL -Dtransdir=\"
which checks the export requirements, returned the following information:
Return code from tp: 0232
Error text from tp: ERROR: Connect to TI6 failed (20110131145153, prob..
and i have checked the all requirements transport..all are fulfilled..
Can any body tell me the solution.
Regards,
Kittu.

Hi Juan,
Thanks for your reply. I cant see tp import log because Request itself is not yet released and in tp system log it says that
ERROR: Connect to SID failed (20110131102838, probably wrong environment).and the value of DIR_TRANS is
HOSTNAME\sapmnt\trans.
Please suggest me what to do to solve this issue.
Regards,
Kittu.

Transport control program tp ended with error code 0211

Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
Harry

Dear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry...

Transport control program tp ended with error code 0247

Hi,
Our landscape is such that any transport request once released, gets imported to Q system immediately. However there is another system (another box REG - regression testing) to which I would like to import a request but the transport queue of REG system does not show the request. So I tried to explicitly add it to the queue but I get the following error message, 'Transport control program tp ended with error code 0247.
There doesn't seem to be a problem with data & CO files as the same request is in Q system and the changes are all transported successfully.
This request is a transport of copy that contains some ABAP code. (changes to the relevant package can be saved only in local requests therefore transport of copy is recommended to transport the changes).
The changes appear correctly in Q system but for REG system the request neither appears in the queue nor be added to it.
Can someone advise where the problem is.
Cheers,
KC

Hi
When the REG system is not in the system landscape, probably you may not have Data & Co files in that system & you need to have those files separately in the REG system path & then import it.
Do consult Basis team on this issue.
Thanks,
Murali.

Transport control program tp ended with error code 0016

Hello colleagues,
We are getting the following error when exporting system HRP to HRI:
Transport program TP started successfully for HRPKX00005 21:25:45
|   Transport control program tp ended with error code 0016
|   Error exporting request HRPKT00005 00:59:50
|   Program ended with error or warning, return code: F
|   Runtime (seconds)         :         13.876
|   End of processing: 00:59:50
Please could you kindly help us to solve the issue?
Thanks in advance.
Best regards
Edited by: Víctor Barahona Cimas on Nov 12, 2009 3:33 PM

ok thanks

Transport control program (tp) ended with return code 0200

Hi Gurus,
Please help, we have a fresh system copy of our prod. I already configure new domain controller with one virtual system. it was meant for 2 system lanscape. PRD -> VIR. The problem now is everytime we try to release a config it shows an error
"Test call of transport control program (tp) ended with return code 0200"
System error shows that calling "C:\>tp EXPCHK BWPK900060 pf=
SCWOSAPBW3\sapmnt\trans\bin\TP_DOMAIN_BWP.PFL -Dtransdir=
SCWOSAPBW3\sapmnt\trans" Error text from tp: ERROR: Buffer check failed.
But doing it in OS level it has no issues
C:\>tp EXPCHK BWPK900060 pf=\\SCWOSAPBW3\sapmnt\trans\bin\TP_DOMAIN_BWP.PFL -Dtr
ansdir=\\SCWOSAPBW3\sapmnt\trans
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.63 (release 640)
createinfo succeeded
Buffer check succeeded
tp finished with return code: 0
meaning:
Everything OK
STMS are all ok connection test, transport directory test and transport tool test.
Kindly help me to resolve issue.
OS platform is windows 2003, Netweaver 04 640, MSSQL2005.
Thank you in advance.
Joel

Hi Anil,
Here is the result after the tp check all command.
D:\usr\sap\trans>tp check all pf=d:\usr\sap\trans\bin\TP_DOMAIN_SID.PFL
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.63 (release 640)
check>Log file is written to \\hostname\sapmnt\trans\tmp\CHECK.LOG
check>
check>Collected 3 filenames from [\\hostname\sapmnt\trans\buffer\.]
check>Collected 2 Systemnames from [\\hostname\sapmnt\trans\buffer\.]
check>Collected 00001 out of 00001 entries from buffer BWP.
check>Collected 00001 entries from buffers
check>
check>Collected 1 filenames from [\\hostname\sapmnt\trans\cofiles\.]
check>Found 0 invalid filenames on Cofile-directory
check>
check>
check>Collected 1 filenames from [\\hostname\sapmnt\trans\data\.]
check>Found 0 invalid filenames on Datafile-directory
check>
check>Collected 14 filenames from [\\hostname\sapmnt\trans\log\.]
check>Found 2 invalid filenames on Logfile-directory
check>
check>Collected 3 filenames from [\\hostname\sapmnt\trans\sapnames\.]
check>
check>WARNING: BWPK900060 has status T_STEP_UNKNOWN in sapnames/TEST
check>WARNING: BWPK900058 has status T_STEP_UNKNOWN in sapnames/TEST
check>WARNING: BWPK900056 has status T_STEP_UNKNOWN in sapnames/TEST
check>WARNING: SAPKD64038 has status T_STEP_UNKNOWN in sapnames/SAPUSER
check>WARNING: BWPK900060 has status T_STEP_UNKNOWN in sapnames/SUPPORT
check>Elapsed time 0m 1s
tp finished with return code: 0
meaning:
Everything OK
Kindly advise on what to do next.
Thank you.
joel
Edited by: Joel Cancio on May 31, 2010 11:47 AM

Test call of transport control program (tp) ended with return code 0212

Hi All,
Your transport request could not be exported, since all requirements
were not fulfilled.
Calling the transport control program tp
"tp EXPCHK DEVK905090
pf=
ord-sapdev\sapmnt\trans\bin\TP_DOMAIN_DEV.PFL -Dtransdir="
which checks the export requirements, returned the following
information:
This is the error i got.. Please let me know how to solve this issue..
Thanks & Regards,
Santhosh

Hi Santhosh,
you can check it out in STMS
wht you can do is:
Run Tcode STMS > Overview imports (F5) > you will find all import queues > then click on the import queue in which u want to see the status of transport (DEV , QAS , PRD )
then find out the transport no > click on that > then click on logs or press ( ctrl + f4)
If the Return Code is higher than 0012 then it says that a critical error has occurred, probably not caused by the contents of the request. You must inform your system administrator.
Hope this information will help you.
Regards,
SB.

Re: Transport control program tp ended with error code 0212

Hi ,
When transport request is added to import queue, getting following error :
"Transport control program tp ended with error code 0212 "
Please find the slog file description as follows:
HALT 20110530001050
ERROR: /usr/sap/trans/cofiles/K904416.<SID>: cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 2273
HALT 20110530004629
ERROR: /usr/sap/trans/cofiles/K904416.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 14341
HALT 20110530004703
ERROR: /usr/sap/trans/cofiles/K904416.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 14514
How to correct this ?
Thanks
Srikanth

Hi,
It may happen happen due to permission issue when you are having SAN and sharing common trans directory now to check the permission of the file you have to login at os level and check the permission of the TR.
cd /usr/sap/trans/cofiles/
ls -l K904416<SID> - now here it will show the permission of the file please paste the output
Thanks,
Saleem

Extended Transport Control (CTC=1) issue

Similar Messages

Maybe you are looking for