Extended transport route

Hi,
We have 3 clients in DEV,3 clients in QAS, 3 clients in PRD. We want to setup client specific routes.
( DEV100-->QAS400->PRD700 , DEV200-->QAS500-.PRD800 , DEV300>QAS600-.PRD900 )
Can someone please let me know how transport route digram will look like for this considering QA approval , Production approval.
Thanks & Regards,
Aprit.

I got it So closing..

Similar Messages

What's the difference between transport route and transport layer

what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

Hi,
Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development
    work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport
    layer.
    The transport layer determines whether objects are assigned to a local
    or transportable change request.
Use
    Each of your SAP development systems is assigned a transport layer as
    its standard transport layer. If you use Extended Transport Control, you
    can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System
and transport layer.
When you create a package, it is assigned the standard transport layer
of the SAP System.
If you want to assign a different transport layer to a package, you
require the administration authorization for the Change and Transport
System.
The objects in a package automatically have the transport attributes
defined for the corresponding transport layer.
o   If a consolidation route originating in their SAP System is defined,
     then the objects are assigned to a transportable request, and
     transported into the consolidation target when it is released.
o   If a consolidation route is not defined, the objects are assigned to
     a local request, and are not transported.
Customizing settings are not assigned to a package. They have the
transport attributes of the standard transport layer of the system or
client.
It is best to assign a package a standard transport layer for which a
consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the
Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
     The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
     Release 4.0A and cannot be maintained.
Regards
Ben

Extended Transport Control Usage??

Hello All,
"Extended Transport Control is another way to set up the Transport Route so that the route is system and CLIENT specific"..I m not able to understand this concept so unable to implement Extended Transport Control in my SAP Landscape.Please help me..Moreover I have one more doubt..
Suppose I release a change request in DEV Client 0XX it will not only automatically be added to the Import Queue for QAS but also 0X1, 0X2, of DEV If I implement Extended Transport Control..Is there any other utility of Extended Transport Control??

Some people complain exactly the same way about me, don't worry.
At least you have stopped points-gaming with Joydeep Gupta for sometime already and from your own frustration are now forced into trying it yourself and putting more effort in before you launch your questions, or at the least while you wait for an answer. You seemed to have even used the search now as well.
I think all this should be seen in a very positive light, considered as progress and is largely thanks to the efforts of Juan.
It might take you a while, but oneday you will hopefully thank us.
Cheers,
Julius

STMS Extended Transport Control

Anyone ever used the Extended Transport Control in STMS? The team at my current project wants to setup a client landscape like this (not the complete diagram)...
DEV100 >--+----+--> QA100 >-----> PROD100
          |    |
DEV110 <--+    +--> QA120
          |    |
DEV120 <--+    +--> QA121
               |
               +--> QA700
When a transport is released in DEV100, it will go to some of the clients in DEV and QA all the time, but in other clients it will be in a more controlled manner (e.g., on demand only).
I've always done multi-client transports at the o/s level using customized scripts etc to import into various clients, however since this client will be using ECC 5.00 and BW 3.5 (and Solution Manager 3.1) I'd like to get them setup from the start with the STMS functionality. It appears to me that I need to use the TMS Extended Transport Control, and I'm just wondering if anyone has a) any experience with it (both positive and negative), and b) any quick start-type information on how to configure TMS for a setup similar to the above.
Thanks in advance for any advice

I have created 3 following client ids.200, ids.300, and ids.400 in my IDES system with the SAP-USER profile.
Login to 000 client with SAP* user for the following configuration in the Transport Management System, STMS---go to Overview click on the Transport route, Your TMS configuration will be display in the center window if done.
Press F5 or click on Pencil Icon to switch to Configuration editing mode, Click on Edit menu then click on the Transport Target Group to define the multiple client of single or multiple system which exists in your landscape.
I will prefer to work on Hierarchical list Editor Mode instead of Graphic mode, to change from graphic mode to Hierarchical, go to setting menu click on transport route editor and select the Hierarchical List Editor Mode, setting will take effect to go to back and click on transport route again.
You have to Switch Editing mode before continue to define the consolidate route, go to Edit Menu, Transport Route and click on Create, Transport route window will display with the Consolidate / Deliver route options. Select the Consolidate Route and click on Extended Transport Control (F6) button down.
Integration system ..Will be your current or development system as source system
Transport LayerEnter the default layer which has been created with your integration system.
Consolidation TargetSelect your target group which created earlier.
Save the Configuration, activate and distribute the configuration across all systems.
Your system is ready to transport the requests to multiple systems and multiple clients
Regards
Anwer Waseem
SAP BAISS

Setup Transport route

Hi,
can anyone please share the step by step process to setup client based transport routes between dev, qa and prod (dev client 100, qa cleint 100 and prod client 100) including any transport layers and transport groups to be created. All three systems have their own /usr/sap/trans. No common directory for all three.
Thank you so much for your time in advance.
Srihari

Hi,
you have to activate Extended Transport Control
http://help.sap.com/saphelp_47x200/helpdata/en/1e/080c7201b011d284870000e8a57770/frameset.htm
Regards,
Ganesh

Unable to add transport route in HANA Application Lifecycle Management (XS)

Hi There,
When we are using HANA LM to create transport routes then routes are created but straight away it comes with following error message:
Internal Error: Transport Route(s) could not be retrieved.
We have checked that required roles are assigned to user. Roles are
sap.hana.xs.lm.roles::ExecuteTransport
or
sap.hana.xs.lm.roles::Administrator
Same works in DEV and PROD environment. I ran debug in Chrome and found that it is throwing an error when trying to run following:
http://XXXX:portnumber/sap/hana/xs/lm/core/transport.xsjs?enrich=true&_=XXXXXXX
After looking in HANA studio I have found that transport.xsjs has got following function which will throw above error on exception:
function retrieveTransport(req, res) {
if(!utils.checkForPrivileges(res, [ "sap.hana.xs.lm::Display"])){
    return;
var item = utils.getItem(req.path);
var enrich = req.parameters.get("enrich");
var deleted = req.parameters.get("removed");
try {
    if (typeof item === 'undefined') {
      var transportRoutes = trans.readAllTransports(deleted);
      if (enrich) {
        enrichTransportRoutes(transportRoutes,deleted);
      utils.setNoCacheHeaders(res);
      res.contentType = 'application/json';
      res.setBody(JSON.stringify(transportRoutes));
      res.status = $.net.http.OK;
    } else {
      // retrieve transport path id
      var tpath = trans.readTransport(item);
      if (!tpath) {
        utils.reportError(res, null, utils.getText("TRANSPORT_ID_INVALID", item));
      } else {
        res.contentType = 'application/json';
        res.setBody(JSON.stringify(tpath));
        res.status = $.net.http.OK;
} catch (ex2) {
    utils.reportError(res, null, utils.getText("ROUTES_NOT_RETRIEVED"), ex2.toSource());
Please see attached chrome console log for more info:
I am able to retrieve information about this but I am not sure what is causing this. Your help will be really appreciated.
Regards
Angad

I've also tried the following wlst:
createJCRFileSystemConnection(server='SERVER-MS1', appName='application', name='Repository', path='/APP/ContentRepository/')
But then i'm getting:
java.lang.UnsupportedOperationException: Could not find MBean operation "createConfig(java.lang.String)" for MBean registered under "oracle.adf.share.config:ApplicationName=application,name=ADFConfig,type=ADFConfig,Application=application" and implementd by "class oracle.adf.mbean.share.config.RuntimeMXBeanImpl"
Error in creating configuration with name "oracle.adf.mbean.share.config.runtime.webcenter.doclib.AdfDoclibConfig"
java.lang.UnsupportedOperationException: Could not find MBean operation "refresh()" for MBean registered under "oracle.adf.share.config:ApplicationName=application,name=ADFConfig,type=ADFConfig,Application=application" and implementd by "class oracle.adf.mbean.share.config.RuntimeMXBeanImpl"
An error occurred while performing "setAttribute" on "PrimaryConnectionName"
javax.management.RuntimeMBeanException: These mbeans encountered exceptions and may not have been saved
Repository- JCR -- Could not do this operation, the backing store for this context is read only.Edited by: Harry van Oosten on May 10, 2010 10:33 PM

ChaRM transport route, one development, 2 QA, 2 PRD system landscape

Hello,
We have a customer who has an ERP system with a transport route which is the following:
One single Development system which feeds, 2 QA systems and then 2 PRD systems.
We are to implement ChaRM and we want to customize the tickets so that every time you execute the import action of a transport request into QA (and later into PRD) both systems QA1 and QA2 are updated and later on with PR1 and PR2.
We would like to know how to support this scenario in Solution Manager using ChaRM. How do we set up the logical component at SAP, how we define the transport route and layers, and how we define the actions in the SDHF ticket.
I appreciate your help.
Regards
Esteban

Hello,
We set up a testing environment for change request management. In a solution manager we created five clients. One single development which feeds two quality systems, and final two production system. As it was said in the thread we used transport groups in the transport route. The development system feeds this transport group which feed to import queus in quality systems. We tested this transport route and transports worked well and arrives into both production 1 and production 2 systems.
Then created a logical component for that landscape, with five sytems. Then we created a maintenance project using that logical component. We created a maintenance cycle and then a task list was created which shows two delivery system, and the two productive systems. All the groups have the right actions.
However when we created a SDHF correction the system creates the task list only for 3 systems, not for the five of them.
we see that only action groups are created for development, quality 1, and production 1. No entries for quality 2 and production 2
We try to run the action which is in the general part of the task list to execute the import in multiple systems, it cames out with the correct selection of importing in quality 2 system because it is the transport group. However an error is raised saying that the actions for quality 2 are not there in the task list which is true. Finally, as short term solution, we were able to import into quality 2 and later on pr1 but done manually in the stms transactions which is not what we want to do.
Regards
Esteban Hartzstein
Edited by: Esteban Hartzstein on Aug 24, 2010 2:06 AM
Edited by: Esteban Hartzstein on Aug 24, 2010 2:07 AM

COMPUTE_BCD_OVERFLOW error while saving transport routes

Hi,
When we are creating new transport routes with domain controller ABC. It is giving the above dump.
Dont know what to do. FYI we deleted previous TMS config and created new one.
Thanks,
Rohan

Check the values which you are passing to the BDC.. the data type should be changed for a field.
You can execute the BDC with mode 'A' & check.
Best regards,
Prashant

How can I add a system to the transport route?

Hi,
      I have a DBP --> PBQ --> PBP systems and now I have a new environment TRN (Training system) and I want to include this system in the transport route.
Right now the transport route is configured like I said 'DBP --> PBQ --> PBP' and I want to include this environment (TRN) to the transport route because I want that the system pass automatically the orders that going to PBP system to TRN too in the same time that pass it to PBP. For example, like this:
                 PBP
DBP --> PBQ ==>
                 TRN
How can I do that?
<removed_by_moderator>
Read the "Rules of Engagement"
Thanks people!!
Edited by: Juan Reyes on Apr 16, 2009 8:57 AM

Hi Carlos,
whatever be the environment, whether it is DEV, QA or PRD, when you login into an ABAP SAP system and run transaction STMS,
In the initial screen, it always shows two fields, System and Transport domain.
System field contains the SID in which you are currently logged in.
Transpor Domain shows value like this: DOMAIN_SID
here this SID is the domain controller for the system in which you are logged in
However, if you are logged in the domain controller system itself and then run STMS, then it will show in the lower half of the screen, that, you are logged in as a Domain Controller.
To be more clear, run STMS in any system and Menu->Overview->Systems->Second column 'TMS system type' must contain a 'domain controller symbol' against one sytem SID. this SID is the domain controller.
thanks
Bhudev

Problem in extended Transport control while setting up transport request.

I created a BDC program which will create a database table upon executing..
The problem is the program worked well since yesterday, But today when i executed it , it is showing a information message when creating a new transport request .
Extended transport control is not active:
Cannot specify target client
Since it s a recording ,and all the windows are processed using an OK CODE, this info box comes all of a sudden .I dont kno what went wrong , coz it was working fine the previous day.
i could not create a new workbench request even after ignoring that info message.
Pl suggest me what could be wrong.

This message has a long text, please read it.
Check with your system administrators, if they have changed anything regarding the transport process.
In addition, instead of using "fragile" recordings, try using function modules like DDIF_TABL_PUT.
Thomas

ChaRM: transport route migration

Hi!
we have a lot of different transport routes with different transport layer and would like to implement ChaRM.
We have a lot of different transport routes with different transport layer where we assign the developer classes/packages.
Now we would like use ChaRM.
As we know ChaRM uses standard transport layer and transport route.
Therefore we plan to consolidate all the developer classes/packages assigning to none-standard transport layer and route and migrate them to standard transport layer and transport route
Questions:
1) Can some one confirm whether or not ChaRM uses the standard transport layer with standard transport routes?
2) Or is it possible to create own transport layer u201CZCRMu201D, assign them all the development class/package relevant for ChaRM and leave the other none-transport layer unchanged?
3) Can one development class/package be assigned to several transport layers?
4) Has some one experience dealing with the approach of migration?
(tcode SE16 --> T_DEVC)
It will be great get some information regarding these questionsu2026
Thank you very much!

Hello,
We set up a testing environment for change request management. In a solution manager we created five clients. One single development which feeds two quality systems, and final two production system. As it was said in the thread we used transport groups in the transport route. The development system feeds this transport group which feed to import queus in quality systems. We tested this transport route and transports worked well and arrives into both production 1 and production 2 systems.
Then created a logical component for that landscape, with five sytems. Then we created a maintenance project using that logical component. We created a maintenance cycle and then a task list was created which shows two delivery system, and the two productive systems. All the groups have the right actions.
However when we created a SDHF correction the system creates the task list only for 3 systems, not for the five of them.
we see that only action groups are created for development, quality 1, and production 1. No entries for quality 2 and production 2
We try to run the action which is in the general part of the task list to execute the import in multiple systems, it cames out with the correct selection of importing in quality 2 system because it is the transport group. However an error is raised saying that the actions for quality 2 are not there in the task list which is true. Finally, as short term solution, we were able to import into quality 2 and later on pr1 but done manually in the stms transactions which is not what we want to do.
Regards
Esteban Hartzstein
Edited by: Esteban Hartzstein on Aug 24, 2010 2:06 AM
Edited by: Esteban Hartzstein on Aug 24, 2010 2:07 AM

Function module/BAPI or standerd program to define Transport route

Hi All,
I am configuring the TMS configuration through ABAP program .
I am able to configure Domain controller, and able add system to it.
Now I am not able to define Transport route, Can anybody tell me how can I achive this?
Is there any function module/BAPI or standerd program for it?
Thanks,
Swarup

Hello
To check the BAPIS to related module go to swo1 tcode.
Thank u,
santhosh

Multiple CTS+ non-abap transport routes

Gurus:
We find a document about CTS+ as follows:
https://websmp104.sap-ag.de/~sapidb/011000358700000517932007E
On above picture, OTO is the shared DEV system.
1) Is this correct?
2) if we have different DEV systems for different landscapes, what should we do?
All are non-abap ststems in this discussion.
Thanks!.

Hi,
the transport route's definition that you described (OTO as start system of all transport routes for CTS) is only valid if your CTS-System is on NW 7.0 SPS 12. Starting with NW 7.0 SPS 13, the 'real' development system is also set as the starting point in the transport route.
Are you using SPS 12?
You can find a detailed description on CTS+ on help.sap.com: http://help.sap.com/saphelp_nw70/helpdata/EN/45/ec25370fdc3481e10000000a1553f6/frameset.htm
If you need information on CTS, please take a look at the CTS page here on SDN: Change and Transport System
hope this helps
Karin

Need Transport route for two systems(Urgent)

Hi All,
I have configured everthing like configuring domain controller and added to to domain controller.
Now i need to do below steps
I have Development (client) and Quality(client) in same system and Production as separate server.
I want to configure transport route from Development client to Quality client and from Quality client to Production Server.
Development Server SID is DEV ( Dev Client 100 and Quality Client 140) and Production Server SID is PRD
Transport route must be configured like below:
DEV( Dev client 100) -> DEV (QAS client 140) -> PRD
We are struck with this
Best Regards,
Pratyusha

Hi Pratyusha,
As far as configuring Development and Quality systems concern, in one system is not suggested. I think you are aware of this.
However, I need some more information on your question like the operating systems which you are using in DEV/QAS and in PRD.
First, configure the Domain Controller in either DEV/QAS or PRD.
Irrespective of the OS, you need to maintain IP address along with the host name and fully qualified domain in the etc/hosts file.
for example DEV/QAS system ip address is 172.16.23.14 and host name is abc007, then you need to make an entry in etc/hosts file at the OS level as follows.
172.16.23.14 abc007 abc007.yourcompany.com
where in abc007.yourcompany.com is the fully qualified domain name.
Once you done this in both, DEV/QAS and PRD, systems, then configure 3 system landscape from STMS tcode in the other system which is not a Domain controller.
I hope this is helpful. Getin touch if you have any more questions or doubts.
Regards,
Satish.
Edited by: Satish Arram on Jul 31, 2008 2:06 PM

Adding system with same name as existing in transport routes

Hello,
I have following tms scenario, (DD1 is tms domain):
DD1->DQ1->DP1
I need to include copy of DP1 system in the transport routes to have situation like this :
DD1->DQ1->DP1
|->DP1 (copy)
My question is: Is it possible for two systems with the same name to exist in tms, or if it is not possible how to resolve this ?
Thank You and best regards!

You should have changed the SID during the system copy... SID stands for System ID... you can't have two systems with the same SID in the TMS
Regards
Juan

Extended transport route

Similar Messages

Maybe you are looking for