Extender doesn't work

Bought an AirPort Express some time ago.
AirPlay function works, but WiFi extender doesn't work, meaning that i barely recieve Wifi at the other end of the house.

Please locate the model number on the AirPort Express on the side of the device. It starts with an "A" followed by four numbers, as in something like A1264 for example.
Post back that info so that we know which model that you have.
In order to extend the wireless signal, you need to have another Apple wireless router providing the signal that the Express will extend, assuming that your model is capable of that function.
Which Apple AirPort router is your "main" router? The model number will appear on the bottom of the device.
Finally, we need to know if you are still using the Mac with OS X (10.5.8) that you list in your profile. If not, which version of the operating system is your Mac now using?

Similar Messages

Updated OS X and now PS CS 5 extended doesn't work

Have the latest Macbook Pro 17" with i7 processor, 8gm memory, all that stuff, running all updates on everything. I've run into a first for me. I updated the OS this evening to the newest update from 10.7.3 to 10.7.4.
Now Photoshop won't work. Gives the following on start up: "One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing. Please run the Photoshop installer and re-install Photoshop."
I looked through a few items about this on the net and several fixes were offered. I couldn't find any that I was competent to do other than sign in and reload the program. Not a big deal with FiOS, quick download.
Or so I thought. Used the whatever it is called downloader. After several hours and several attempts, it never finished and seemed to hang what I thought was near the end.
So I chose to just do a straight download. After a couple of minutes, I have the Photoshop_12_1_LS1.dmg in my download folder. Moved it to the desktop. Tried to open. Gives me the following error: The following disk images couldn't be opened: Photoshop_12-1-LS1.dmg (reason) invalid checksum.
I am now stuck and do not know how to proceed further. Any insight would be appreciated.
Thank you,
Robert

You have a corrupt DMG. Download it again.

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

Airplay mirroring on Mac Mini (late 2012) doesn't work, extended display does...

Airplay mirroring on Mac Mini (late 2012) doesn't work, extended display does... What's going wrong here?
Details: OS X Yosemite 10.10
Apple TV 3rd generation, version 7.0
Switching Airplay on on Mac Mini works. It goes automatically on extended display mode. Switching to mirroring works for about 1 sec and then it switches back to extended display mode. On my tv screen i see my second desktop. Funny detail: it has the desktop background i used previously. Another funny detail: I had exactly the same problem when i used the previous versions of OS X and the Apple TV software...
Who can help, please!

I also have been having problems with Airplay on my 2014 Mac Mini see Mac Mini 2014 Airplay Display Disconnect Bug?
I"ve also noticed that my Apple TV (3rd Gen) does not appear in the iTunes Airplay list on my Mac Mini whereas it does on my MacBook.
I've booked a call with Apple Support for next Sunday to discuss the issue.
If I get any useful info I will pass it on.

WiFi Sync with iOS 5 doesn't work with Airport Express used as a wifi extender?

So in our apartment we have an Airport base station that doesn't reach all the way to the bedrooms, so we use an Airport Express as a wifi extender/repeater. The Wifi sync doesn't work when connected to the Airport Express. My iPhone and iTunes can't find each other. But if I'm sitting next to the base station it works just fine. Is there a workaround for this to get wifi sync working in my bedroom? I've updated both Airports to the latest firmware versions.
Thanks
Byron

Well, never mind. It magically started working.

SendStation iPod / iPhone Dock Extender from GadgetLocker doesn't work!

Ok I went to the Gadget Locker and bought iPod / iPhone Dock Extender [URL="http://www.thegadgetlocker.com/productinfo.php/cPath/223/productsid/2787"]http://www.thegadgetlocker.com/productinfo.php/cPath/223/productsid/2787[/URL]
and than I bought an incase Case.
It doesn't work. The gadget used to support the iPhone does not fit into old docking stations. See photo 1:
The Dock Extender is to wide for the iPhone Dock!
See photo 2:
I called the Gadget Locker and the nice lady didn't even own an iPhone and could not try it! Do not use this company if you want a dockable iPhone solution

A little tape seemed to fix the problem, is this safe?

Since update extended wifi doesn't work

I updated my express extreme as required. Since my airport express that I use to extend my wifi doesn't work anymore. I did a reset and when I try to configuration it keeps telling me that an error has occurred and that I should try again.

I reset modem and router. Still have the same issue. I have a laptop connected to the network as well as a PS3. Both are working great. Did a Speedtest app test on iphone. With 3g it was working good. When i switched to wifi, it was trying to get the ping test accomplished, and could not. it was stuck in the ping test at 0% for a long time and never progress.

Extend a network worked fine for 2 years, now it doesn't

Sorry I'm not at home so I've gotta go off bad memory...
My setup has worked fine for a number of years. A non-simultaneous dual band Extreme is the main base station. I have a Express ethernet-ed to the network working without issue. There's also a newer Extreme farther away that has been wirelessly extending the network without too much issue until now. Airport Utility pops up now saying the newer Extreme is unable to extend. All I attempt to do is restart because all my settings seem to have been fine. Original base set to create with extend checked, and the newer Extreme set to extend with the same ssid, password etc.
So what's changed if I haven't changed anything? Newer versions of something?
Thanks for any input.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Want to extend my WLAN (ZyXEL) using 2013 airport extreme; doesn't work... Any ideas?

Hi
I want to extend my WLAN (using a ZyXEL VDSL-modem) with 2013 airport extreme. Doesn't work. What am I doing wrong?
Does APE only work with Twisted Pair cable? That's the only way so far I can access the Internet using APE. But that was not my plan when I ordered it. So - am I wrong or is there a solution (without buying airport express on top of it …)?
I am using AP utility v 6.3.1., OS X 10.8.4.
Thanks
swissgerman

In your case, you will need to connect the AirPort to the ZyXEL product with an Ethernet cable.
As far as your question of Does APE only work with Twisted pair cable?
I cannot answer for all products. I said "probably" because as far as I know and have tested....the Apple products will not "extend" a signal from another manufacturer wirelessly.
There might be a product that works with Apple. But, someone else will have to tell you what that product might be.
If you want to extend using wireless with Apple.....as far as I know.....it takes two Apple products to do this.

If statement doesn't work in JPanel

Hi everybody.
I'd like somebody tell me the reason why the "if" statement doesn't work in a Jpanel but works in a Japplet. I'm including the fragments of code that are relevant to the question.
Thanks in advance.
public class Applet_INVEN extends JApplet {
jTabbedPane jTabbedPane1 = new JTabbedPane();
Panel_1 p_1 = new Panel_1();
JLabel jLabel1 = new JLabel();
JTextField jTextField1 = new JTextField();
JButton jButton1 = new JButton();
void jButton1_actionPerformed(ActionEvent e) {
if (jTextField1.getText() != "0") //------Executes when the condition is true
jLabel1.setText("bingo");
public class Panel_1 extends JPanel {//------INSIDE a JPANEL
JTextField jTextField1 = new JTextField();
JTextField jTextField2 = new JTextField();
JTextField jTextField3 = new JTextField();
JButton jButton1 = new JButton();
void jButton1_actionPerformed(ActionEvent e) {
jTextField2.setText(jTextField1.getText()); //----Ever executes, of course!
if(jTextField1.getText() != "0") //----Never executes, even when
jTextField3.setText("ojo"); //----the condition is true!

You shouldn't use the != operator to test equality of Objects. Use Object.equals() instead.
if (jTextField1.getText() != "0")
should be
if ( ! jTextField1.getText().equals("0"))
or better:
if ( ! "0".equals(jTextField1.getText())) <-- avoids null pointer exception.

HELP! Uploading AS3 Game to server, no sound and Spacebar doesn´t work HELP!

Hello, relatively new to AS3 and flash, this is the first time i am publishing anything. We are trying to upload our simple flashgame to our webserver, the game works perfectly fine locally save for one thing. We get an error regarding TLF which says it wont stream or something. So when it gets online, no sounds play and spacebar doesn't work, left and right arrow does work. We have three TLF text fields that are used to update score, lives and show you final score. If i turn these into classical text they stop working.
Things we have tried: Changing default linkage from RLS to Merged into code, changing the text boxes to classical text(they then stop working), made sure the paths are correct(all files are in the same directory including the .swz file)
This is the code from the soundclass:
package
    import flash.net.URLRequest;
    import flash.media.Sound;
    import flash.media.SoundChannel;
    import flash.events.*;
    public class MySound
        private var bgSound:Sound;
        private var fireSound:Sound;
        private var waterSound:Sound;
        private var earthSound:Sound;
        private var lightSound:Sound;
        private var soundChannel:SoundChannel;
        public function MySound()
            soundChannel = new SoundChannel();
            bgSound = new Sound();
            var req:URLRequest = new URLRequest("BackgroundSound.mp3");
            bgSound.load(req);
            //fire
            fireSound = new Sound();
            var req2:URLRequest = new URLRequest("soundFire.mp3");
            fireSound.load(req2);
            // water
            waterSound = new Sound();
            var req3:URLRequest = new URLRequest("soundWater.mp3");
            waterSound.load(req3);
            // earth
            earthSound = new Sound();
            var req4:URLRequest = new URLRequest("soundEarth.mp3");
            earthSound.load(req4);
            // light
            lightSound = new Sound();
            var req5:URLRequest = new URLRequest("soundLight.mp3");
            lightSound.load(req5);
        public function playBgSound()
            soundChannel = bgSound.play(0, 999999);
        public function stopBgSound()
            soundChannel.stop();
        public function playFireSound()
            fireSound.play();
        public function playWaterSound()
            waterSound.play();
        public function playEarthSound()
            earthSound.play();
        public function playLightSound()
            lightSound.play();
I can somewhat get that sound can bugg out, but why does spacebar stop functioning? ANy help is greatly appreciated as this has to be delivered in twelve hours(published online) for a school assignment.

Also might add publishing it locally in my own browser everything works, as does ofcourse playing it in flash itself. Changing from RLS to merged into code stops the error from coming, but doesn´t fix the problem on the server.
Code from main class related to sound and spacebar:
import flash.display.*;
    import flash.events.*;
    import flash.ui.Keyboard;
    import flash.text.TextField;
    import flash.media.Sound;
    import flash.net.URLRequest;
    import flash.events.MouseEvent;
    import flash.utils.Timer;
    import flash.events.TimerEvent;
    public class main extends MovieClip
        private var fireTimer:Timer; //delay between shots
        private var canFire:Boolean = true;
        private var mySound:MySound;
        private var bulletSpeed:Number = -450;
          public function main()
            //load sounds
            mySound = new MySound();
        private function playGame(event:MouseEvent)
            gotoAndStop(2);
            // initialize
            myLives = 5;
            myHitsNo = 0;
            weaponType = 1;
            mybullets = new Array();
            enemys = new Array();
            myScoreTxt.text = "Score: " + myHitsNo;
            myLivesTxt.text = "Lives: " + myLives;
            fireTimer = new Timer(400, 1);
            fireTimer.addEventListener(TimerEvent.TIMER, shootTimerHandler, false, 0, true);
            stage.addEventListener(KeyboardEvent.KEY_DOWN, listenKeyDown);
            stage.addEventListener(Event.ENTER_FRAME, addEnemy);
            stage.addEventListener(Event.ENTER_FRAME, checkCollision);
            player = new thePlayer(stage.stageWidth-40, spawnPoint2);// stage.stageHeight/2);
            stage.focus = player;
            addChild(player);
            mySound.playBgSound();
public function listenKeyDown(event:KeyboardEvent) // Controls and weapontype selector
            if (event.keyCode == 37) //left
                player.movethePlayerDown();
            if (event.keyCode == 39) //right
                player.movethePlayerUp();
if (event.keyCode == Keyboard.SPACE) //space
                shootBullet();
                //soundFX.attachSound("Pistol Fire.wav");
                //soundFX.start();

L2TP on Cisco ASA 5505, just doesn't work??!

This is pretty urgent, client expects me to have this up by lunch today
So, there is this Cisco ASA 5505 ver 8.4.
Most things work but now I want to setup a vpn connection...
I have done this 2 ways, first by using the "VPN Wizard" in ASDM and then 5 hours later removing everything and configuring from cli.
And it just doesn't work, client (WinXP & Win7) gets "error 792" and sometimes "error 789" (both indicating problem with phase 1, I'm pretty sure of that)
Googling on those gives a few suggestions none works.
All I get in the log on Cisco is the "Error processing payload: Payload ID: 1"
Googling on that only comes up with a few pages telling me this message is caused by an error. (Yeah, I could never have guessed...)
For the cli config, I followed this tutorial carefully (3 times actually...)
http://www.cisco.com/en/US/docs/secu...html#wp1117464
I'm using PSK for IPSec, entered same on Cisco and client - checked several times, this is not a password/PSK issue.
Ports opened on Cisco: 500, 1701, 4500
(For a try I opened all ports, no change.)
And here's the "show run":
Code:
ASA Version 8.4(2)
hostname ciscoasa
enable password <string> encrypted
passwd <string> encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.5.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address #.#.#.# 255.255.255.252
interface Vlan7
description VLAN till kontor
no forward interface Vlan2
nameif kontor
security-level 100
ip address 172.16.5.1 255.255.255.0
ftp mode passive
clock timezone GMT 0
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Webserver
host 192.168.5.2
object network Webserver443
host 192.168.5.2
object network rdp
host 192.168.5.2
object network vpnserver
host 192.168.5.2
object service vpn-service-group
object network VPN
host 192.168.5.2
object-group service Webports tcp-udp
description Portar fÃ¶r webbserver
port-object eq 443
port-object eq www
object-group service DM_INLINE_TCP_1 tcp
group-object Webports
port-object eq www
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service VPNports tcp-udp
port-object eq 1701
port-object eq 4500
port-object eq 500
object-group service RDP tcp-udp
port-object eq 3389
object-group service vpn-services tcp-udp
port-object eq 1701
port-object eq 500
access-list outside_access_in extended permit tcp any object Webserver eq www
access-list outside_access_in_1 extended permit tcp any object Webserver object-group DM_INLINE_TCP_1
access-list outside_access_in_1 remark Ãppnar fÃ¶r vpn
access-list outside_access_in_1 extended permit object-group TCPUDP any any object-group VPNports
access-list outside_access_in_1 extended permit object-group TCPUDP any any object-group RDP
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu kontor 1500
ip local pool vpn1 10.10.10.10-10.10.10.50 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
object network obj_any
nat (inside,outside) dynamic interface
object network Webserver
nat (inside,outside) static interface service tcp www www
object network Webserver443
nat (inside,outside) static interface service tcp https https
object network rdp
nat (inside,outside) static interface service tcp 3389 3389
access-group outside_access_in_1 in interface outside
route outside 0.0.0.0 0.0.0.0 79.142.243.33 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authorization command LOCAL
aaa authorization exec LOCAL
http server enable
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA mode transport
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec ikev2 ipsec-proposal 3DES-SHA
protocol esp encryption aes-256 aes-192 aes 3des
protocol esp integrity sha-1 md5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal 3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=ciscoasa
proxy-ldc-issuer
crl configure
crypto ca certificate chain ASDM_TrustPoint0
.... (sorry, not giving you the cert...)
crypto ikev2 policy 1
encryption 3des
integrity sha
group 2 1
prf sha
lifetime seconds 86400
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 1
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 1
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh scopy enable
ssh 0.0.0.0 0.0.0.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 10
console timeout 0
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
l2tp tunnel hello 100
dhcpd dns 8.8.8.8
dhcpd auto_config outside
dhcpd address 192.168.5.11-192.168.5.36 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec
address-pools value vpn1
group-policy DfltGrpPolicy attributes
dns-server value 79.142.240.10
vpn-tunnel-protocol l2tp-ipsec
address-pools value vpn1
username test password <string> nt-encrypted
username someoneelse password <string> nt-encrypted privilege 15
username someoneelse attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec
service-type admin
username someone password <string> nt-encrypted privilege 0
tunnel-group DefaultRAGroup general-attributes
authorization-server-group LOCAL
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group vpn1 type remote-access
tunnel-group vpn1 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:dd92aa6707dc63e8ed7dad47cfecdd47
: end
In Pingvino Veritas!

I lmost got it working now, new problem is that the connection is immediately ended.
Logs shows that client is authenticated and assigned an ip.
From the logs, all happens during one second:
IPAA: Client assigned ip-address from local pool
IPAA: Local pool request succeeded for tunnel-group
IPAA: Freeing local pool address
L2TP Tunnel created, tunnel_id is 24
L2TP Tunnel deleted, tunnel_id =24
IPSEC: An outbound remote access SA has been deleted
IPSEC: An inbound remote access SA has been deleted
Session is being torn down. Reason: L2TP initiated
Teardown UDP connection

LVOOP "call parent method" doesn't work when used in sibling VI

It seems to me that the "call parent method" doesn't work properly according to the description given in the LabVIEW help.
I have two basic OOP functions I am doing examples for. I can get one to work easily and the other one is impossible.
Background
There are 3 basic situations in which you could use the "call parent method"
You are calling the parent VI (or method) of a child VI from within the child VI
You are calling the parent VI (or method) of a child VI from within a sibling VI
You are calling the parent VI (or method) of a child VI from a different class/object.
From the LabVIEW help system for "call parent method":
Calls the nearest ancestor implementation of a class method. You can use the Call Parent Method node only on the block diagram of a member VI that belongs to a class that inherits member VIs from an ancestor class. The child member VI must be a dynamic dispatching member VI and have the same name as the ancestor member VI
From my reading of that it means situation 3 is not supported but 1 & 2 should be.
Unfortunately only Situation 1 works in LabVIEW 2012.
Here is what I want
And this is what I actually get
What this means is that I can perform a classic "Extend Method" where a child VI will use the parent's implementation to augment it's functions BUT I cannot perform a "Revert Method" where I call the parent method's implementation rather than the one that belongs to the object.
If you want a picture
Any time I try and make operation2 the VI with the "call parent method" it shows up for about 1/2 sec and then turns into operation.
So there are only 3 possibilities I can see
Bug
Neither situation 2 or 3 are intended to work (see above) and the help is misleading
I just don't know what I am doing (and I am willing to accept this if someone can explain it to me)
The downside is that if situation 2 above doesn't work it does make the "call parent node" much less usefull AND it's usage/application just doesn't make sense. You cannot just drop the "call parent node" on a diagram, it only works if you have an existing VI and you perform a replace. If you can only perform situation 1 (see above) then you should just drop the "call parent node" and it picks up the correct VI as there is only 1 option. Basically if situation 2 is not intended to work then the way you apply "call parent method" doesn't make sense.
Attachements:
For the really keen I have included 2 zip files
One is the "Revert Method labVIEW project" which is of course not working properly because it wants to "call parent method" on operation not operation2
The other zip file is all pictures with a PIN for both "Revert Method" and "Extend Method" so you can see the subtle but important differences and pictrures of the relavant block diagrams including what NI suggested to me as the original fix for this problem but wasn't (they were suggesting I implement Extend Method).
If you are wondering where I got the names, concepts and PIN diagrams from see:
Elemental Design Patterns
By: Jason McColm Smith
Publisher: Addison-Wesley Professional
Pub. Date: March 28, 2012
Print ISBN-10: 0-321-71192-0
Print ISBN-13: 978-0-321-71192-2
Web ISBN-10: 0-321-71255-2
Web ISBN-13: 978-0-321-71255-4
All the best
David
Attachments:
Call parent node fault.zip ‏356 KB
Call parent node fault.zip ‏356 KB

Hi tst,
Thankyou for your reply. Can you have a look at my comments below on the points you make.
1) Have to disagree on that one. The help is unfortunately not clear. The part you quote in your reply only indicates that the VI you are applying "Call Parent Node" to must be dynamic dispatch. There is nowhere in the help it actually states that the call parent node applies to the VI of the block diagram it is placed into. Basically case 2 in my example fulfills all that the help file requires of it. The dynamic dispatch VI's operation are part of a class that inherits from a given ancestor. Operation 2 for Reverted behaviour is a child VI that is dynamic dispatch and has the same name as the ancestor VI (operation2). The help is missing one important piece of information and should be corrected.
2) True it does work this way. I was trying to build case 2 and had not yet built my ancestor DD for operation so the function dropped but wasn't associated with any VI. I was able to do this via a replace (obviously once the ancestor Vi was built) so this one is just bad operator
3) Keep in mind this is an example not my end goal. I have a child implementation because this is a case where I am trying to do a "reverse override" if you like.
3a) The point of the example is to override an objects method (operation2) with it's parent's method NOT it's own. The reason there is a child implementation with specific code is to prove that the parent method is called not the one that relates to the object (child's VI). If I start having to put case structures into the child VI I make the child VI have to determine which code to execute. The point of Revert method is to take this function out of the method that is doing the work. (Single Use Principal and encapsulation)
3b) The VI I am calling is a Dynamic Dispatch VI. That means if I drop the superclass's VI onto the child's block diagram it will become the child's implementation. Basically I can't use Dynamic Dispatch in this case at all. It would have to be static. That then means I have to put in additional logic unless there is some way to force a VI to use a particular version of a DD VI (which I can't seem to find).
Additional Background
One of the uses for "Revert Method" is in versioning.
I have a parent Version1 implementation of something and a child Version2. The child uses Version2 BUT if it fails the error trapping performs a call to Version1.
LabVIEW has the possibility of handling the scenario but only if both Case 1 and Case 2 work. It would actually be more useful if all 3 cases worked.
The advantage of the call parent method moving one up the tree means I don't have the track what my current object is and choose from a possible list, if, for example the hierarchy is maybe 5 levels deep. (so V4 calls V3 with a simple application of "call parent method" rather than doing additional plumbing with case structures that require care and feeding). Basically the sort of thing OOP is meant to help reduce. Anything that doesn't allow case 2 or 3 means you have to work around the limitation from a software design perspective.
If at the end of the day Case 2 and case 3 don't and won't ever work then the help file entry needs to be fixed.
All the best
David

How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

It's because of the extension of the hard drive is a Windows extension ( most likely MSDOS or Ex-FAT), meaning you can only read but not write. If there are no important files (or you can copy the whole thing to your computer/mac) you can just reformat the hard drive and change the extension to NTFS (readable and writable on both windows and mac) or Mac OS Extended (readable and writable on Mac, readable on windows).
Go to DISK UTILITY
Choose the Hard Disk you intended
ERASE
You can choose either
(I personally prefer this one, you know just in case)

I cannot sync Ical on my iMac with my professional calendar (outlook web access). and I don't understand why it doesn't work since I have already made it with my iPhone. Help

Hello,
I bought an iMac few days ago. I would like to sync ical on my iMac with my professional calendar I use in my company (from outlook web access).
I was easy to manage it on my iPhone (I just add a new "exchange" mail account and ask for a calendar sync only) and it worked very quickly.
But I cannot do it with the iMac, and I don't undersatnd why?
the domain is is used for my iPhone is the following :
owa.companyname.com
I tried all the solutions I found in this forum but it doesn't work.
Many thanks in advancefor your help.
Matt

Does it have to be an applet?
If you want the same behaviour as in the code with traffic lights, change
class MortgageApplet extends JApplet implements ActionListener {
to
class MortgageApplet extends JFrame implements ActionListener {
and change
public void init() {
to
public MortgageApplet() {

Extender doesn't work

Similar Messages

Maybe you are looking for