Extender for Fios Quantum Router

Fios quantum installed a month ago... Not crazy about ..I had better coverage with the old system. I bought the net gear 350 wireless extender because wifi coverage was poor. Didn't work. Should I buy the one Verizon sells? Hate to waste the money if they will not let me return it if doesn't work. Any suggestions. TY

The Verizon wireless extender will work as long as the extender gets the new firmware update. It should take about 10 minutes to update and connect if it has the old firmware.

Similar Messages

HT1515 Can I use Air Port express as a signal extender for SKY Broadband router in UK?

Can I use Air Port express as a signal extender for SKY Broadband router in UK?

You are going to have to turn OFF Wifi on the Sky router device so its just a modem.
String an Ethernet cable off of the Sky router to an Apple Airport/Time Capsule device and have that create a stable WiFi network.
Using WDS protocols you can now add additional Apple Airport expresses as needs be to extend the Wifi signal area.
In theory you should able to extend an existing network however inter-operability between differing manufacturers is flaky at best.
Caveat using extenders Will degrade the performance of your network.
So its going to be more expensive - Need Two Airport devices and you my need support in creating the network (you may have to log in to the Sky provided routers advanced settings in the Java Control Panel and from a web browser to turn off features such as Wifi and IP addressing)
You may be better contacting Sky as they may actually have a compatible network extender (BT certainly do for their Home Broadband routers) available.

Network Extender stopped working with new FIOS Quantum router

I have had a Network Extender for a few years (the older 1x model, SCS-26UC4) but it stopped working when I upgraded to FIOS Quantum. That upgrade included a new router.
I have opened the TCP (53, 52428) and UDP (500, 4500, 52428) ports on the router without much luck.
The Network Extended does seem to work if I bypass the FIOS router and connect the Network Extender directly to the WAN. So it seems the issue is in the router configuration.
All lights are blue except for the SYS light, which cycles from fast red blink, slow red blink, steady red and then blue for a while. When it's blue the extender works (which I can tell by the sound my phone makes when it connects via the Extender). But then it goes back to red.
One thought I had was to open a DMZ on the router but I cannot find the instructions. It's the Actiontec MI424WR router.
Help appreciated.

Try page 83 in the user guide for the DMZ.
Call Verizon Communications and tell them your Verizon Wireless Network Extender does not work when connected to the router, but it does work when connected directly to the ONT. You shouldn’t have to use a kludge (DMZ) to make it work, the router should be smart enough to figure it out.

WiFi extender with FIOS Quantum Gateway

Hi, I have a Netgear WN1000RP wifi booster that worked fine with my old Verizon modem/router. I recently got the new Verizon FIOS Quantum Gateway G1100 router, and the wifi booster no longer works. I read on another forum that this could be due to the MoCA standard being different. The G1100 supports MoCA 2.0; whereas, most boosters only support MoCA 1.1. According to the G1100 user manual, the G1100 supports MoCA 1.1 also, but I don't know how to set it to use MoCA 1.1 instead of MoCA 2.0. Does anyone know? Has anyone else found solutions for using a wifi booster with the G1100? Thank you!!

I am also having a similar problem. My older third generation router plays and communicates nicely with my MoCA modems around the house. They are a bit older (and I'm not sure how easy it is to get MoCA 2.0 equipment anyway), so they are probably the 1.1 standard. The new G1100 doesn't see them at all though everything else works. I assumed from the manual that 1.1 support is automatic and couldn't find anything in the configuration menus to make it downgrade to 1.1. Perhaps it is a bug in the firmware or hardware. It would be interesting to hear if others have gotten the G1100 to work with older MoCA equipment.

TC as Extender for Non-Apple Router?

I have given up on my TC as a wifi router and will be replacing it with a Buffalo AirStation N450. I'm going to leave it connected to the network to continue to use its internal drive and I would also like to use it as an extender for the Buffalo. Does anyone know if this is possible? Has anyone used a TC or an AEBS to extend a wifi network from a non-Apple router?

LaPastenague wrote:
You cannot extend non-apple wifi.. with an Apple router. To make it clear the TC can be client of the buffalo but not repeater. That is also a poor way to do thing with repeating slowing wireless by half.
You can use EOP adapters and run the TC as a roaming wireless access point. That is relatively easy.
That answers the question. An EOP adapter was my second choice, although using the TC to extend the network is less important than keeping its internal drive on the network for Time Machine backups. I've never been satisfied with its wifi performance and I've finally gotten fed up enough with its wifi glitches to replace it.

Settings for fios actiontec router using coax when adding time capsule as ac router

I would like to set up my new time capsule as my main wireless router on a fios coax-wan internet that is currently using the m1424wr revisiion I router.
What are the settings i should use for the actiontec versus the time capsule and what is the best way to set it up to take advantage of the AC wireless on the TC without losing set top box features providing by the actiontec router over coax?
I got the TC to conenct via WAN to LAN on actiontec but i think that may limit my ability to take advantage of the capabilities of the time capsule.
Any suggestions ont the best set up given I have multiple devices both iOS, OSX and need relaiable coverage of a 3 story town house.
Thanks!
Tim

Best setup is to bridge the TC.. which I think is how you set it up.
I got the TC to conenct via WAN to LAN on actiontec but i think that may limit my ability to take advantage of the capabilities of the time capsule.
You do miss the guest wireless network and BTMM on the TC itself... but otherwise it is the best for everything else.
Tell us if you need these functions.
To cover a 3 storey town house a single wireless router is not going to be adequate.. if you can place the TC on a different floor to the modem that could be very helpful, with ethernet to link the two.
Otherwise you need an Express or two so the coverage can be extended.

Have FIOS Quantum router up and running - but now can't connect to Tivo or my Aria scale -help!

Getting my router set up was quick and easy, but now I have a problem that has me stumped. I am not a router expert, so need help.
Neither my Tivos nor my Aria scale can connect to my router.
Tivo sent me this page: http://support.tivo.com/app/answers/detail/a_id/402
I am not sure that I am well-versed enough in router speak to figure it out on the admin dashboard.
Anybody who has run into this and has advice for me?
I have gone through the Tivo settings and Aria set-up, but both produce errors. For Tivo, it can't find the DHCP server. Aria just gives me a Wifi error message.
HELP!

Interestingly enough, as soon as I plugged in our old trusted ActionTec, my Tivo connected without a problem, and I got my Motorola NIM100 to stop blinking. Go figure. On the phone now with Verizon (on hold) to figure this out. If not, it's going back.
Speli wrote:
Getting my router set up was quick and easy, but now I have a problem that has me stumped. I am not a router expert, so need help.
Neither my Tivos nor my Aria scale can connect to my router.
Tivo sent me this page: http://support.tivo.com/app/answers/detail/a_id/402
I am not sure that I am well-versed enough in router speak to figure it out on the admin dashboard.
Anybody who has run into this and has advice for me?
I have gone through the Tivo settings and Aria set-up, but both produce errors. For Tivo, it can't find the DHCP server. Aria just gives me a Wifi error message.
HELP!

FiOS Quantum Gateway Router - Intermittent Dropped Connections

I just got this router and incredibly disappointed!! I had the Arcotec.. Excuse my spelling and was having intermittent problems with that but this new a Gateway is herendous!!! I can't believe they charge you a 199 for this. Wifi signal lost constantly. Called tech support.. Now they want to charge me 75 bucks for an extender that they say will help.. Optimum looking better all the time!! Very frustrated.

I am experiencing the exact same issue. My issue also started after i upgraded to their 50/50 plan and swapped out my Actiontech M42xxx for the Quantum Gateway Router. They had me do the following and i am still having the issue. 1. disconnect the coaxial cable and the power from the router2. Reset the fios box in my garage by unscrewing the battery power and removing the battery3. Replaced the router (Verizon did this and the replacement was another Quantum Gateway)4. Replaced the box in my garage (Verizon did this)keleko68 wrote:
Hi All, I upgraded my FiOS service a couple of weeks ago to the Quantum 50/50 service and bought the Quantum Gateway/router (model# FiOS-G1100). I used to use the Actiontec router (model# MI424WR, Rev. I). I've been having issues probably for months with intermittent or dropped connections on both wired and wireless connections. Fast forward to the beginning of December. I called tech support enough to the point of them sending a tech out to look at it. My ONT was old, and he replaced it. I had hoped that this was the issue, but it wasn't. The drop-offs continued. I again hoped the upgrade in service and router would also fix the issue. Nope... didn't. This 'latest, most powerful' router only has two lights on it, one for wireless signal and the other that looks like a globe. The router sits on my desk, so I can watch the lights. While I am surfing around, the globe light will suddenly flash for about 5-10 seconds. While this is happening, my connection drops/stops, and then resumes a couple of seconds after the globe light stops blinking. I also noticed that the globe light will turn red once in a while, but not nearly as often as the blinking white does. It's not really consistent as to how long I can be online before the connection starts dropping. I haven't honestly watched it for a long period of time (in other words, I don't know if it's still doing it while I'm not at the computer). I just notice it while I'm trying to use the connection. Once the router starts disconnecting, it can happen as often as every few minutes. VERY annoying. My setup is:2 Mac laptops (one used wirelessly and one used wired connected to a display)1 Apple TV (wired)1 Apple Airport Express (wired)1 printer (wired) I don't have any cordless phones, powerline adapters, wifi extenders, or other electronics that might be messing with the signal. I use VPN software but haven't noticed a difference with it on or off (I think). Any thoughts as to what this might be or where to look? Thanks in advance. I am still having the issue. there is obviously an issue and either Verizon knows about it and doesn't want to say they know there is an issue and fix it, or they are too dumb to take the time to find out. Each time i call i give them detailed information on the issue and ask them to check their knowledgebase if its listed as a know issue and they keep saying it's not. The issue happened again tonight, 1/8/15. at first my laptop dropped Internet connection while i was surfing. then i checked my other wi-fi devices and they all lost connection. i then went and checked my wired devices and they too lost connection. I look at the router and this time both the Globe Internet and the Wi-Fi lights were solid white. i looked at the Internet Ethernet light and the bottom light was green. I could have resolved the issue by unplugging the router and plug it in back, but instead i called Verizon so they could see the issue. 10 minutes into the Verizon call queue the Globe Internet light changed from solid white to solid red. 5 minutes later i finally got to speak to a tech. at first he said the box in my garage wasn't connecting to the router and asked me to disconnect the coaxial cable and the power and, according to him, he sent some command and instructed me to connect the coaxial cable and power the router back on. I did that and then the issue went away.I told him the rootcause of the issue was not identified and fixed and the issue would occur again and i needed him to alert engineering or product development about the issue. i then told him its a know issue with the router and he should do a google with "Verizon Quantum Gateway dropping connection" and he would see how many people are having the same issue. I told him Verizon need to take their heads out their A*%%%$ and spend some time and investigate and resolve the issue. Me

I recently upgraded to Fios Quantum and have a new ActionTech router. As a result my PC is no longer communicating with my APPLE TV.It must have a firewall or ports beegin blocked preventing the homesharing and communication even though the APPLE TV is on

I recently upgraded to Verizon Fios Quantum high speed internet and was given an ActionTec router. I sucessfully installed all and connected wth my Apple TV. Although it worked initially it no longer does. Something appears to be blocking the Homesharing between my PC and the AppleTV even though the Apple TV is successfully connected to my home network. I spoke with an Apple Support Tech who was unable to help me becuase I have a PC! He admitted this is a common problem with FIOS and PCS. There must be a port that needs to be opened in the router. I do not beleive it is anything to do with my antivirus software or Windows Defender as i uninstalled all and still not communication. Must be a port within the routter that is blocking tis communication. On my Itunes you can see that it does not see the Apple TV. Please advise.

I'd have to agree. I set my vms and two clients on Saturday in one hour. I think the picture is better I did not see an issue with the brightness. For the heck of it I recorded five channels at once to test it. I've also noticed when playing a recorded show on the client everything responds a lot quicker. So I am impressed and curious to see what new features come later.
Kudos to verizon.

Using a time capsule to extend a fios router?

I know this topic has been covered many times, but I seem to have trouble finding my answer to my exact questions. I have verizon fios wireless router that they provided with the service. We have a large house with the fios router at one end. At the opposite end, the signal is very weak. I want to use my time capsule to extend the network to the other end of the house. Is this possible without connecting a long ethernet cord and placing the TC at the other end of the house. My ideal situation would be to plug the TC into the wall at opposite end of the house of the Fios router and have it connect to the Fios router and extend the wireless connection...is this possible? If not, can someone please solve my problem?

I just turned the wifi setting of my fios router off and plugged it directly into the time capsule. If I had a large house like yours, I would look at something like this:
http://www.engadget.com/2011/06/08/netgears-universal-wifi-range-extender-now-av ailable-for-baldin/

You can bridge the Fios Quantum Gateway Router

Long story short. I could not figure out how to disable SIP on the Fios Gateway Router and some my Intercom Video Door station in use by my Control4 uses SIP. The router was causing conflicts and Control4 advised that SIP needs to be disabled on the router. Disabling SIP is a very common answer to people using IP based video conferencing or VOIP phones. That left me with 2 choices. Get the Fios Quantum Gateway to bridge and install my own router where SIP can be disabled, or get rid of Fios and use an ISP that does not require a combo "modem"/router. I didn't want to give up on Fios so easily. My installation was new and I am happy with the uptime and performance. I spent 2 days trying to get my Fios Quantum Gateway to Bridge. I am writing this up so that someone else doesn't have to live the pain I've lived. First up, after multple days of looking, their are limited instructions on getting the Fios Quantum Gateway router to bridge. The instructions you can find are for the Actiontec router. It's "almost" the same router but not 1:1. Most step by step guides say that the steps for the Actiontec will work for a FIos Quantum Gateway. That's not inaccurate, but isn't fully accurate either. Their are steps involved in the Acitontec instructions that do not apply to the Fios Quantum Gateway. First - this link is the baseline instructions I found that mostly work: http://www.dslreports.com/forum/r27666920-How-to-Make-Actiontec-MI424WR-Revision-I-Rev-I-a-Network All credit to the authors that came before me. I didn't discover these steps. I hijacked them and tested them with some revisions for a Fios Quantum Gateway router. I take not credit or responsbility for any action you take based on my post. It "works for me" and continues to work after 24 hours. My please note that I am using Coax/MoCa from the ONT to the Router and that Ethernet was not an option. I am going to repost the steps verbatim, but add some notes along the way where my experience was different in bold. I highly recommend you read the entire thing one time before starting with the step-by-step. You can replace the word Actiontech with Quantum Gateway in the below. Their are subtle differences in termonligy between the Acitontec and the Quantum. If you see a step in the guide and can not follow because your Quantum doesn't have the same display, you must find the nearest equivelement or ignore it entirelly. First get your Router and Actiontec set up like so: ONT -> Coax -> Actiontec Coax Port -> Actiontec LAN Port 1 -> My Selected Router WAN Port. Unplug the cable from the WAN Port, but keep it nearby. I was actually in LAN Port 1 on the Quantum Gateway but I don't think it will actually matter.
Now we need to obtain the WAN MAC address of each Router device.
For the Actiontec go to: Top Menu – Advanced – MAC Cloning – Set Mac of Device – Broadband (Coax). Here you should see the MAC Address, write this down on a paper or something. This is critical. You need to do this. Without the clone, I was unable to bridge. Note that I did not have to STAY cloned. I just had to clone until the lease expired even though I believe I had released the IP successfully. For your own router: You need to look this up yourself. The ASUS RT-N56U (w/ custom firmware) has a spot that just displays my WAN MAC address for me. I'm using an EdgeRouter from Unfi. Nobody can help you here except the forums for the router you are using because how you do this is different from router to router (generally speaking.)
Once you have both of these pieces of information, it is time to start.
1. Hardware Reset Actiontec Router I wouldn't do this. I didn't. I would actually save a copy of the configuration you have on the router before going any further, in case you have to hardware reset and restore your router.
2. Log into Router using [ admin/password ].
3. Change admin login info and set a different password. There should be a link on the side.
4. Top Menu – My Network – Side Menu – Network Connections – Network (Home/Office) – Settings – IP Address – Setto 192.168.x.1 where x is not used on your LAN – Apply
*NOTE*: Upon changing the default gateway IP of the Actiontec from 192.168.1.1 to 192.168.x.1, you will need to [ ipconfig /release ] and [ ipconfig /renew ] from Command Prompt, so your computer can quickly reconnect to the Actiontec. I changed this to 192.168.0.5 because my DHCP starts at 50. The Fios default is 192.168.0.1 and not .1.1.
5. Log back in to Actiontec router with new IP and new password you previously set.
6. Top Menu – Wireless Settings – Side Menu – Basic Security Settings – Wireless Off – Apply 7. Top Menu – Firewall Settings – Side Menu – General – Minimum – Apply
8. Top Menu – My Network – Side Menu – Network Connections – Advanced 9. Top Menu – My Network – Side Menu – Network Connections – Broadband (Coax) – Settings – Release – Apply
*NOTE*: If your IP address is not released properly you will need to wait 2 hours for your lease to expire or you’ll need to call Verizon Tech and get them to restart your system.
10. Broadband (Coax) – Settings – IP Distribution – Disable – Apply 11. Broadband (Coax) – Settings – DNS Server – No DNS Server – Apply 12. Broadband (Coax) – Settings – IP Address – No IP Address – Apply
13. Top Menu – My Network – Side Menu – Network Connections – Network (Home/Office) – Settings – IP Distribution – Disable – Apply 14. Network (Home/Office) – Settings – DNS Server – No DNS Server – Apply 15. Network (Home/Office) – Settings – UNcheck Box to Left of Wireless – Apply
*NOTE*: The old guide will tell you to uncheck the box to the left of “Coax” here. Unfortunately, in the Rev. I, Ethernet and Coax are stuck together as “Ethernet/Coax” and you can’t split the two. If you uncheck the box to the left of “Ethernet/Coax”, you will lose connection with the Actiontec Router and you will be forced to hard reset and start all over again.
16. Network (Home/Office) – Settings – Check Box to Left of Broadband (Coax) – Apply 17. Network (Home/Office) – Settings – Check STP Box to Right of Broadband(Coax) – Apply The Quantum Gateway didn't have an STP box to uncheck. I ignored this step with no adverse effects. 18. Network (Home/Office) – Settings – Network – Broadband Connection – Apply
19. Top Menu – Advanced – MAC Cloning – Set Mac of Device – Broadband (Coax) Using the information you gathered at the beginning: a. Set the WAN MAC of your selected Router to the MAC address listed here. b. Set the Address here to the WAN MAC of your selected router that will be connected to the Actiontec to avoid conflicts.
20. Plug the cable from Actiontec LAN Port 1 to your Routers WAN Port. Your router should be getting a WAN IP from Verizon. Test to make sure your WAN is established and that you can connect onto the internet, browse pages. Run a speed test to make sure everything is peachy.
*NOTE*: If your router did not get a WAN IP, you have a problem. I would recommend trying to re-trace your steps to see if you missed anything or just start all over and hard reset. :\
21. If everything worked out fine, connect a cable from your Router’s LAN Port 4 to the Actiontec LAN port 4. Again, I was using Port 1. But it shouldn't matter. I haven't tried other ports.
22. Power cycle your STB if you wish. You should see your STB show up in your DHCP list and it should be getting VOD/Widgets. This wasn't neccessary for me as I don't use Verizion TV service. Your millage may very. -V

NOTE: about bridging the Quantum Gateway G1100 Information about this is in DSLReports.com - Verizon FiOS FAQ. SEE: Verizon Online FiOS FAQ -> 3.2 Moca -> Can I get an ethernet connection in a room with only coax? There is a list of instructions for bridging routers, but the Verizon Quantum Gateway is not included there. Follow down the instructions and at step 2.5 here is added information that is not in the FAQ yet.
Instruction 2.5...
2.5a) The Verizon Quantum Gateway G1100 is slightly different from the Actiontec MI424wr. If your primary router's broadband connection is provisioned over coax, you need to disable the remote router's coax WAN connection to prevent it from attempting to become the primary router. If your broadband connection from the ONT to your primary router is ethernet, this step may be unnecessary.
Click on the MY NETWORK icon at the top.
Select NETWORK CONNECTIONS from the menu on the left.
If you’re using the Verizon Quantum Gateway G1100 as the remote router the Network Connections panel will show Broadband Connection (Ethernet/Coax) instead of Broadband Connection (coax).
Click on Broadband Connection (Ethernet/Coax)
The next panel displays Broadband Connection (Ethernet/Coax) Properties as its title. There is a Disable button at the top of the panel. There is also a Settings button at the bottom of the panel. You will come back to the Disable button.
Click on the Settings button.
The next panel displays the same title as the prior panel: Broadband Connection (Ethernet/Coax) Properties
In the middle of the panel next to the heading Enable/Disable Coax Link: there is a button labeled Disable.
Click on Disable.
Click on the Apply button at the bottom of the panel.
You will be taken to the Broadband Connection (Ethernet/Coax) Properties panel that you saw before.
At the top of this screen there is a button labeled Disable
Click on Disable
Click on the Apply button at the bottom of the screen.

My FIOS App for iOS and FIOS Quantum Gateway

I have a new FIOS Quantum Gateway G1100 with a new firmware update including guest Wi-Fi. When I try to use the My FIOS App on my iPad Air 2 and then access the Router and Wi-Fi information I get an error message unable to retrieve Wi-Fi Details. When I try to manage the FIOS Quantum Gateway I get an error message IPAddress Missing for VZID. I'm also unable to access any of the router settings from this app and nothing happens when tap the > symbol.

Make sure you have the latest version of the MyFios app. It's version 3.9.2.10, which you can find on the "App Settings" menu or in the App Store's update page. Updates are handled through the App Store.
Enjoy.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

FIOS Quantum Gateway and Actiontec WCB3000N Wireless Network Extender

I purchased the Quantum Gateway router as I was told that it would provide better coverage in my home but have been disappointed so far. As a result, I purchased the Actiontec WCB3000N Wireless Extender. When I connect the exytender, it works great for about an hour, then I lose WIFI throughout the entire house. When I unplug the extender, I get wireless back. It seems that the extender is causing some kind of intereference, but not immediately.
Any suggestions, very frustrated!
Thanks
Ed

I disagree with etkastor's advice.
While 5 GHz 80211.ac can provide higher speeds than 2.4 GHz formats, 5 GHz definitely will not penetrate solid objects...walls, floors, etc., better. In fact, the 5 GHz spectrum will have worse range through solid objects.
Having said that, I would suggest that if you already have coax running to the third floor, the WCB3000N would be a good solution to get better wifi coverage on that floor.
Also, while I don't have any hands on experience with the Quantum router (yet), there have been a number of posts here on the forum that it's wifi coverage is less than stellar. Maybe worse than the Actiontec.

Fios quantum gateway router problem

Hello, when I connect my coaxial cable and power adaptor to my old verizon mi424wr router, the internet works fine. But when I connect my coxial cable and the power adapter that came with the fios quantum gateway router, the internet doesn't work. On the router, the internet icon keeps blinking white for about a minute, then it just becomes a solid non-blinking red internet icon. Assisstance would be greatly appreciated.
Solved!
Go to Solution.

Your problem may be that you didn't release your WAN IP address before switching routers. It's necessary to do so.
To release your IP address you could power off the new router, wait 2 hours, or overnight if that's more convenient, and then power the router back on.
Or to release the IP address more quickly, with the Actionec in place, follow the steps in this link:
http://forums.verizon.com/t5/FiOS-Internet/How-am-I-able-to-change-my-ip-address/m-p/703336#M47733
After releasing your WAN IP, wait about 10 minutes and then fire up the Quantum router. You should have a new WAN IP address and be connected back to the Internet.

Pay for Quantum Router?

I currently have FIOS 35/35. If I upgrade to FIOS quantum 50/50 (at $10/month additional) I have to buy a router for $200??? I thought the routers were supplied by Verizon.....I don't recall paying for my current router. Can I upgrade to quantum and keep my current router?

Welcome to the forums. You're talking to other customers here. Your question is best answered by Verizon. To reach them, you need to call or chat with them. You could also use the VZ Direct forum over on DSLreports.com. Verizon now rents or sells routers. They no longer give them away. This started about a year or so ago. Sometimes they are available at a discounted price with an upgrade to higher speed tiers. Sometimes not. You'll need to contact them to find out what offers are available to you. If you got an Actiontec years ago it is possible that Verizon considers it yours. I purchased a Quantum router to replace my Actiontec during a sale last winter. I got different stories when about my Actiontec when I contacted Verizon by phone. The folks at the VZ Direct forum were the most helpful; they looked up my account and confirmed that I owned the Actiontec. I suggest you ask there rather than the phone or chat reps. The Actiontec Rev I ("Advanced Gigabit router" with the red band) is perfectly capable of handling speeds well above 50/50. If you have one of these models and don't care about dual-band or guest WiFi, you don't need to get a Quantum router. Good Luck.

Extender for Fios Quantum Router

Similar Messages

Maybe you are looking for