Extending a Tablespace with BR*Tools

Hi,
NW2004s under windows 2003 server, Oracle 10g
When I see DB02 under Tablespace its shows PSAPSR3 100% full autoextend "NO"
how to increase this perticuler table space size with BRSPACE
could you please writedown command with paramaters
Regards,
Thank

Hi,
   BRTOOLS can be used to increase the tablespace. Step by step procedure is here:
http://help.sap.com/saphelp_erp2004/helpdata/EN/fb/90a584038a8f45b116d5d90ce9c23b/frameset.htm

Similar Messages

  • How to shrink a complete tablespace with BR*tools?

    Hi,
    I was wondering if there is a possibility to shrink a whole tablespace via br*tools.
    Using brtools seems quite comfortable when regarding automatically activated ROW MOVEMENT mode. I can easily manage to shrink one or more tables/indexes e.g. beginning with character A or B* and so on. But I just do not get the picture on how to manage the selection for a whole tablespace to shrink.
    Any ideas?
    Regards,
    Andreas

    > But I just do not get the picture on how to manage the selection for a whole tablespace to shrink.
    Hello Andreas,
    the documentation says it all ... [http://help.sap.com/saphelp_nw70ehp1/helpdata/en/82/e2dd47d418354ca3f4f0d0c469d48b/content.htm]
    simply use the
    -s <tablespace name>
    selection switch.
    regards,
    Lars

  • Create tablespace with extend, etc.

    Hi guys,
    I am typing the following commands bellow: (ORACLE_HOME and ORACLE_SID is set up correctly).
    #sqlplus “sys/<sys-password> as sysdba” ==> worked very well, of course !
    SQL> create tablespace imm datafile ‘$ORACLE_HOME/oradata/$ORACLE_SID/imm01.dbf’ size 100M autoextend on next 100M;
    ERROR at line 1:
    ORA-01034: ORACLE not available
    I have the below scripts set up correctly. Any one know how can I solve this problem ?!
    Any help is appreciate !
    # dbstart
    SQL*Plus: Release 9.2.0.1.0 - Production on Fri Apr 7 16:46:24 2006
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    SQL> Connected to an idle instance.
    SQL> ORACLE instance started.
    Total System Global Area 672223892 bytes
    Fixed Size 455316 bytes
    Variable Size 268435456 bytes
    Database Buffers 402653184 bytes
    Redo Buffers 679936 bytes
    Database mounted.
    Database opened.
    SQL> Disconnected from Oracle9i Release 9.2.0.1.0 - Production
    JServer Release 9.2.0.1.0 - Production
    Database "immdb" warm started.
    # lsnrctl start
    LSNRCTL for Solaris: Version 9.2.0.1.0 - Production on 07-APR-2006 16:46:46
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Starting /apps/oracle/OraHome//bin/tnslsnr: please wait...
    TNSLSNR for Solaris: Version 9.2.0.1.0 - Production
    System parameter file is /apps/oracle/OraHome/network/admin/listener.ora
    Log messages written to /apps/oracle/OraHome/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=gama2)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Solaris: Version 9.2.0.1.0 - Production
    Start Date 07-APR-2006 16:46:46
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security OFF
    SNMP OFF
    Listener Parameter File /apps/oracle/OraHome/network/admin/listener.ora
    Listener Log File /apps/oracle/OraHome/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=gama2)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "immdb.gama2" has 1 instance(s).
    Instance "immdb", status UNKNOWN, has 1 handler(s) for this service...
    Service "oradb.gama2" has 1 instance(s).
    Instance "oradb", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    Cheers,
    Murilo

    Can i perhaps add Operating system environment variable to DATAFILE value somehow? I don't want to create tablespace with full file path, starting from drive name and ending with file name.You can use variables in dbca when you create a database (I already can hear you say you don't want that)
    You can also use Oracle Managed Files for the entire database ( I already can hear you say you don't want that)
    You can not use relative paths, which begs the question why you don't want to use an absolute path, assuming you seldomly create a tablespace.
    I don't want to see posts like yours with unjustified 'complaints', yet I do respond to it.
    Sybrand Bakker
    Senior Oracle DBA

  • Adobe Applications Manage rin Yosemite Kaput. Advisor directs me here. another Adobe Run-around. CS5 Extended still crashing with Eyedropper when moved to desktop.

    Adobe Applications Manage rin Yosemite Kaput. Advisor directs me here. Another Adobe Run-around. CS5 Extended still crashing with Eyedropper when moved to desktop.

    I'm sorry to report that I've not yet  figured out how to go about this 'Cleaning'. I've run the cleaner on the Applications Manager, then attempted to reinstall the downloaded Applications Manager and again I get the same message as above. I attempted to trash the Applications Folder and rerun the installer. That did not work. I then moved the downloaded Applications folder to the utilities folder and restarted CS5>Updates. It reports, again it can't find/or is damaged Applications Manager. I will now take the folder out of the trash and return it to the Utilities folder.
    If I run the Recovery tool on Photoshop will I uninstall Photoshop or will it only 'clean' it. Does it mean I will lose any third party plugins?
    I do thank you for your continued support. This is the first time a requested answer/suggestion to my troubles has been promptly be addressed by 'Adobe'. I am also pleased I can reply to an email to aid in resolving questions.
    Again, Thanks!
    CB

  • How do i use my time capsule and extend the network with airport express

    I have a new iMac and Time Capsule, how do i extend the network with airport express. My time capsule does have a guest net work, and logins and passwords? I am no computer person. So for me it would have to be spelled out.

    Use the search as this has been done to death ..
    Bob Timmons is the expert on this.. look at his answers here.
    https://discussions.apple.com/thread/4274187?start=0&tstart=0
    https://discussions.apple.com/message/21856077#21856077
    This has been automated in the v6 utility. I am used to doing it manually in v5 utility which is also fairly easy.
    Apple doco is also good to read.
    http://support.apple.com/kb/HT4145
    http://support.apple.com/kb/HT4259
    Note.
    You cannot extend the guest network unless everything is up to date 7.6.3 firmware. And that is only with the TC as the main router in the network.
    All apple routers can be configured as the main wireless or as the extend wireless.. so don't worry if a post uses express or extreme or TC.. they are for wireless, the same thing.

  • How do I extend a network with an AirPort Extreme from an Arris TG862?

    I'm using Comcast as my ISP, and after some issues with a previous Motorola modem, they supplied me with an Arris TG862 Router/Modem combo tower. I have two AirPort Extremes, one of which was previously connected to the old Motorola modem to send wireless into the house, but it only reached halfway, so I had the other AirPort Extreme in the middle of the house to "catch" the signal and then broadcast it out to the rest of the house. This worked fine for a while.
    But with the new TG862, it doesn't seem to be an option. From what I've read, if I have the TG862 in one room (connected to the cable), AirPort Extreme #1 in the middle of the house, trying to join the existing network (or extend it?), and AirPort Extreme #2 in the far end of the house (to extend from AirPort #1), it won't work. Apple's "extension" technology isn't compatible with all other modems or routers, and even if it was, I'd have to somehow configure the TG862 to "allow to be extended."
    So my question is, IF there is a desktop utilizing the TG862 as a direct connection (because it has no built-in Wi-Fi), is it possible to put the TG862 into bridge mode, connect one of the AirPort Extremes and have it act as the router so I can use AirPort Extreme #2 to extend that network out to the rest of the house? I want to ensure the desktop still has a connection, but there's Wi-Fi that actually goes out through the whole house.
    The connected-to-the-cable-desktop is a PC; we have multiple iPhones, iPads, and anywhere from 1 Mac laptop to 1 iMac in the house at any given time.

    pcbjr wrote:
    Topic title pretty well sums up the question.
    I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
    We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
    So, can the Extreme act as an "extender" only, in lieu of using an Express?
    Hiya.
    You can absolutely extend a network with an Extreme. I've got a 5th gen. Extreme extending a network created with a 3rd gen. Time Capsule. On the Extreme, you'll have the option to allow (or not) WiFi clients. I recommend having all units updated to the current firmware (7.6.1 as of this writing). Note that extending doesn't work in daisy-chain fashion, meaning that your Expresses or Extremes will each connect to and extend from the TC. As such, you'll want the TC to be in as central a location as possible to offer the best coverage.

  • I need help with bone tool please c:

    Hey guys, I'm making an animation using adobe flash cs5, in this animation there is a dinosaur, when I use bone tool it stuffs up a LOT. I've converted all parts to symbols but i am now beginning to hate my computer, so after trying everything I was wondering id anyone could do it for me. I would appreciate it SO much. ill send it through to you if u inbox me ur email or something like that so that u can tweak it HOWEVER u want as long as it ends up with bone tool. Thank you guys and girls SOOOOO much !
    -Jesse

    Hey guys, I'm making an animation using adobe flash cs5, in this animation there is a dinosaur, when I use bone tool it stuffs up a LOT. I've converted all parts to symbols but i am now beginning to hate my computer, so after trying everything I was wondering id anyone could do it for me. I would appreciate it SO much. ill send it through to you if u inbox me ur email or something like that so that u can tweak it HOWEVER u want as long as it ends up with bone tool. Thank you guys and girls SOOOOO much !
    -Jesse

  • Logic pro 9.1.7 does not show note velocity data with velocity tool

    Anyone have an issue with files not showing note velocity and duration data with velocity tool in the piano roll in Logic 9.1.7? It only show the note and the velocity change (+1 or -1 for instance). I have to use Logic 9.1.5 because of that.

    Hi
    glankrudolph wrote:
    I realize this could be a host of issues other than Logic Pro 9, such as Audio Midi Setup (which often doesn't recognize my Mbox2 Pro).  But again, thought I'd start here.
    If Audio MIDI Setup cannot see/recognise the MBox, then Logic will be unable to see it. Audio MIDI Setup is at OS level: if your MBox does not show up it is likely to be:
    Driver issues (highly likely)
    Cable Issues
    FW socket issues: hardware fault.
    CCT

  • I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesen't wor at all.

    I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesn't wor at all. Is there any solution for this problem?

    Hi!
    I restarted the computer, but the same issue happens again. When I move my mouse over some object or tool, it doesn’t come active at all (only some of the tools works) When I try to change “site properties”, I can’t choose tablet or phone mode or even I can’t select the checkboxes, only thing what I can do is change the numbers (high and width) . After all the main problem is that I can’t select some of the items or functions by mouse, but only by the keyboard.

  • Problem with Pen Tool CS5

    Hi,
    I just got Photoshop CS5 and I'm having a bit of trouble with the pen tool - namely, I can't see the path I'm creating.  In CS3 I could clearly see the line between two points but in the new program the line is nearly invisible making it very difficult to create the path.  Is this a setting I can fix?
    thanks

    I was having 32 bit while I upgraded from CS3 to  CS4. The only problem with CS4 that time was with pen tool.Though I cannot precisely recall , I can say it t was very lazy and very frustrating and this was resolved totally after shifting to 64 bit.--If urs existing system is 32 bit try with 64 bit

  • How to work with EEWB tool in CRM and how to assign it to PCUI

    Hi Friends,
    Can any body will suggest me how to work with EEWB tool in CRM to add new fields ,i need to attach the fields to a GUI screen and same to PCUI also,
    And how to attach a search help for those fields,is the tool will automatically will create the search helps or it is similar as we do in abap,
    So can any body suggest me to get a material on this ,
    Thaking you
    Regards
    Raghavendra Prasad

    Prasad
    Following are the steps involved in general :
    1. Select the filter Worklist and enter your name in the input field of the object list selection. Press the enter key. Your object list is displayed.
    2. Place your cursor on the highest node(PROJECT BY XXXXXX). Select Create project from the context menu by right-clicking on it. You see the dialog box Create project.
    3. Enter a project name, description, packages, and namespaces for each system used. Leave the dialog box by pressing the enter key.
    Specify transport requests. The Project is created and appears in the object list.
    4. Place your cursor on the new project in the object list and select Create extension in the context menu. You see the dialog box Create extension.
    5. Enter a name and description. Define a Business Object and extension type. Press the enter key.The extension is created and appears in the object list below the project.
    6. Place your cursor on the new extension in the object list and select Call wizard in the context menu. The wizard for the extension action starts automatically.
    7. Fill in the input fields following the notes on screen and end the wizard by clicking on Complete.The extension tasks have been created and appear in the object list.
    Project and extension are created !
    Also take care that you have the Transport Requests and Save the Project and Extensions against a Development Class !
    In general , EEW will automatically puts the fields on the Screen. We donot want to worry abt that !
    The generated BADIs can be implemented to do some Checks(for example) !
    I hope this helps !
    Thanks
    <b>Allot points if this helps !</b>

  • How do I extend my WiFi with Airport Express? I have Ethernet in the house and an Wifi that do not cover the whole house. I do not get it to work.

    I have Ethernet in the house and an Wifi that do not cover the whole house. I do not get it to work. I have tried to get it into my network and it get connected via the WiFi but not the Ethernet. Also when it gives a green light I cannot see that it is giving any signals to my devices (iPhone etc).

    You need to pay attention to something, while extending your network with the latest AirPort Express upgrade, your devices will be connected to it except your iPhone, you'll see your iPhone always connected to the capsule instead, even if you're at 1 foot from the AirPort Express.
    You need to change the radio settings from automatic to 802.11a - 802.11b/g on your capsule, then I put it back to the default settings...
    Now in the AirPort utility you should see your iPhone connected to the AirPort

  • Using extended desktop mode with ThinkPad x220

    I have an Acer AL2216W external monitor. It has a resolution of 1680 x 1050
    http://support.acer.com/acerpanam/monitor/0000/Acer/AL2216W/AL2216Wsp2.shtml
    When I use extended desktop mode with the external monitor set as the primary display, everything scales properly on both the external and internal monitor.
    However, if I set the internal monitor as the primary display, the external display does not fill the screen (there is a big black border around the desktop).
    In both cases, the resolution setting for the external monitor is 1680 x 1050.
    Is this normal behaviour?
    Solved!
    Go to Solution.

    Hello,
    That's how Windows behaves.  Supposedly Realtime Soft Ltd.'s UltraMon gives you more precise control over wallpaper under Windows, but I have not used it myself.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Trouble Sampling Colors with Eyedropper Tool: InDesign CS5

    Hey everyone,
    My name is Quin, and I've used InDesign CS5 for the past few years and am working on a magazine layout for the first time. I'm suddenly having a really difficult time getting the eye-dropper tool to extract color samples from images i've placed in my layout. These are either jpeg or PDF images. If I recall correctly, in my past use of the program, i could simply click the eyedropper tool in an image and get my color sample – but suddenly, i'm having trouble getting it to sample color/make a color swatch.
    I tried double clicking the tool and excluding everything i wouldn't want it to sample. Tried locking/unlocking layers, tried making sure the image frame itself is selected, tried holding down option, tried trashing the preferences (using a 2012 MacBook Air with the latest version of OS X Mountain Lion)… most of the time when i attempt to sample a color, nothing shows up in the fill box, except the classic diaognal red line over white.
    The exception is when i use the eyedropper to sample non-image base things i've already filled, like a retangle, it picks up the color fine. So it's likely image specific. Is there something really obvious that i'm missing? It's frustrating because i simply want to sample colors to get a rough idea for text colors and headlines that can match images, and there doesn't seem to be a quick way to do this…
    Thanks so much for the help!
    -Quin

    Quin, I just had a eureka moment! I was having the exact same problem,  unable to sample color from images with the eyedropper tool, and when I sampled text to apply formatting, it strangely applied a black rule around the new text. The problem was intermittent, with the tool both working  and not working within the same document. I finally realized the tool was  misbehaving when sampling an item on the document, but worked fine when sampling images or text on the pasteboard.
    So, the document I'm working on is an ad with a 1pt rule around the border. I have the border on it's own layer at the top level, and locked, so I can select items on the ad without the border getting in the way. What I found is, even though it's locked, the eyedropper tool is sampling the border from that layer!
    I tried turning off  stroke  settings in the eyedropper options just gave my text a fill of 'none.' Turning off both stroke and fill settings had no effect on the new text at all. I tried unlocking the layer and just locking the border on it's own, but it still picked up the formatting from the border.
    The only thing that worked is to hide the layer! Turn off the layer 'eyeball' and see if that works for you.

  • Can I extend a network with an AirPort Extreme Base Station Rather than with an Express?

    Topic title pretty well sums up the question.
    I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
    We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
    So, can the Extreme act as an "extender" only, in lieu of using an Express?

    pcbjr wrote:
    Topic title pretty well sums up the question.
    I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
    We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
    So, can the Extreme act as an "extender" only, in lieu of using an Express?
    Hiya.
    You can absolutely extend a network with an Extreme. I've got a 5th gen. Extreme extending a network created with a 3rd gen. Time Capsule. On the Extreme, you'll have the option to allow (or not) WiFi clients. I recommend having all units updated to the current firmware (7.6.1 as of this writing). Note that extending doesn't work in daisy-chain fashion, meaning that your Expresses or Extremes will each connect to and extend from the TC. As such, you'll want the TC to be in as central a location as possible to offer the best coverage.

Maybe you are looking for