Extending AD Schema Mountain Lion ML 10.8

Looking for documentation or a guide that can help my AD administrators extend the AD schema to allow us to manage our 10.8 Macs. We want to be able to have these macs connect to our windows network shares and sync there home folders to the it.

I have the same question. Here's my post about it : https://discussions.apple.com/message/21152728#21152728
Seems like Apple removed the Schema Extension in the 10.8 white paper from the public eye for an unknown reason. It was well explained in 10.7.

Similar Messages

Need help saving layer styles Photoshop CS6 Extended for Mac (Mountain Lion)

I have been trying to learn Photoshop. I am using Photoshop CS6 Extended on a Macbook Pro (Mountain Lion). My Adobe software has been updated. I have been doing tutorials using a lot of layer styles. In one of these tutorials, it was suggested that if I would possibly want to use the style again that I should save it. At this point I had entered all my layer styles info and was still in the window with the list of layer styles on the left (bevel and emboss, drop shadow, etc., and the "New Style" button on the right. I clicked on the "New Style" button and when another window popped up asking me to name the style, I named it. When I looked at my styles in the styles panel, I saw the little button for the new style. I saved my graphic and closed it. Later I wanted to apply this style to text in another graphic. The style was used on text originally. When I clicked on it though the style didn't look the same. Upon investigation, a couple of setting under Bevel and Emboss had reverted to defaults. They were different numbers when I saved the style. I could go back in and change these two numbers and get the same results, but I don't understand why these numbers changed on their own -- why the style didn't completely "save." Is there something I have done wrong, or is this some kind of bug? Any help would be greatly appreciated! Thank you in advance!

Thank you very much for your reply! Yes, both documents were at 72 resolution. This morning I tried to save yet another style (same resolution document). It worked when I used it the first time. Then I switched to the other style I had saved. That one took some of the bevel and emboss settings from this morning's style. The numbers which will not save are the angle and altitude under the shading section. Just now I made another document (text at 72 resolution) and both styles had changed these numbers to 120 and 30. Is this something I am doing wrong? I am trying to use text of a similar font and size. I updated my software last night in the hopes that that would help. This morning I reset preferences. Don't know what to do! Thanks for helping me!

PS CS6 extended on osx mountain lion?

what are the problems to be aware of when installing p.s. cs6 on mac osx mountain lion?

Moving this discussion to the Photoshop General Discussion forum. Millersan1 you may also want to review Photoshop and Lightroom compatibility with Mac OS X 10.8 (Mountain Lion) - http://helpx.adobe.com/photoshop/kb/photoshop-lightroom-compatibility-os-x.html.

What Floppy Drive can I use with Mountain Lion to read and write floppy which can be read by SE30 with 7.1

I want to File Exchange between an iMac with 10.8.4 and a SE30 with 7.1.
All I want to do is install some software, such as Word 5.1 and a Chess game and some Fonts.
I have an external USB Floppy Drive but my iMac can only write to it IF I format as FAT, if I format it with the SE30 it can only be read and not written onto by the iMac.
Is there a way I can actually format/read/write Macintosh extended (HFS+) with Mountain Lion?
The external USB Floppy is a generic black one I bought from Amazon last week.
Someone else said I should get a Macally USB Floppy Drive and that reads/writes HFS+ etc with 10.8 no problem.
Is this because the Macally was released along with the Bondi Blue iMac?
I have tried using Apple Exchange on my SE30 - recorded some files onto the FAT formatted Floppy, and read it using Apple Exchange, but when 'translating' the Files transferred over as generic files which were no longer Macintosh programs or Files (eg Word 5.1 application or extensions/ Font suitcases etc) and could not be read.
Is there a way round this?
Or is there any way I can mount/read/write from the generic USB Floppy DRIVE with Sheepshaver (with 7.5.3)?
Any help or advice would be most appreciated.

>surely there must be some Terminal command or workaround for 10.8 to be able to Format in HFS?
Using dd to write an existing HFS disk image to a floppy may still work (but formatting/writing HFS from the operating system does not). You may want to compare this with the technique described in the article below. Obviously, this is only of interest if one wants to try creating floppies from certain (Disk Copy 4.2-style) downloaded 1.44 MB disk images.
http://lowendmac.com/brierley/08pb/classic-mac-boot-floppy.html
>If I got hold of an old iBook or Powerbook G4 (my sister has one) could I plug the USB Floppy drive I have into one of these and copy files over this way?
At least according to the following Wikipedia article, writing HFS has not been supported since Mac OS X 10.6. This should mean that your idea with the USB floppy drive connected to one of the older computers mentioned could work. BTW, I do not think that the USB floppy drive type/make/model is of importance in this very context.
Another idea could possibly be to use an even older intermediate computer for other file transfer methods (without a floppy).
A PowerBook 520/520c/540/540c could run Mac OS 8.1, if at all necessary. It has built-in Ethernet (an external AAUI to RJ-45 transceiver is used), which would allow TCP/IP connections over a network. A LocalTalk connection to the SE/30 can be established via a plain Macintosh MiniDIN-8M to MiniDIN-8M printer cable. With the correct SCSI cable/adapter, one could also use the PowerBook as an external hard disk for the SE/30 in SCSI disk mode.
A PowerBook 5300 can run Mac OS 8.1 or higher, if necessary. It does not have built-in Ethernet, but a PC Card (PCMCIA) network card can be used. Furthermore, with an inexpensive PC Card adapter for CompactFlash and a CompactFlash memory card, the computer would have a simple removable "hard disk". The CF card (in Mac or PC format) can be read by a modern computer (a USB reader may be needed), making it ideal for file transfers. LocalTalk can be used here too, and so can SCSI disk mode (HD target mode).
Jan

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition

just bough OSX Mountain Lion, my laptop operating with v10.6.8. Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition table. 24.44gb disk available.

Verify your computer can run Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Open Disk Utility and verify the drive is partitioned using GUID and formatted Mac OS Extended, Journaled. If it is then do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now try installing Mountain Lion.

After done the Mavericks update from Mountain Lion, I can't no more extend my applications to the second screen. Can somebody help me ??

After done the Mavericks update from Mountain Lion, I can't no more extend my applications to the second screen. Can somebody help me ??

Check here:
System Preferences > Mission Control > uncheck Displays have separate Spaces > Log Out ( >Log Out <user>) > Log back in

How to extend battery life in Mountain Lion?

I have an Macbook 5,2 and recently I update Mac OS X from Snow Leopard to Mountain Lion (10.8.3 12D58). Current main problem is my battery life reduced from 5 hours to 1:58:00. This is crazy. Are there some applications runs on the back ground? How to uninstall useless applications and extend battery life? Looking forward to get help from this forum.
Best Regards
Stephen Lee

Runaway applications can shorten battery runtime ...

Want to buy airport extreme, am using mountain lion. Will this work ? also, my house is 5,500 square feet all on one floor. Do I need an extender and which one?

want to buy airport extreme, am using mountain lion. Will this work ? also, my house is 5,500 square feet all on one floor. Do I need an extender and which one?

... If I purchase an express to extend is it hard to configure as an extender?
No, AirPort Utility prompts you with step-by-step questions and makes configuration simple.
The Express and Extreme have the same transmitter power specifications, so I suggest the $99 Express as an extender, should you need one. Beware that you cannot add a second Express to wirelessly extend the network any further - as the following excerpt from Extending the range of your wireless network by adding additional Wi-Fi base stations explains:
Extended network range considerations
In the above example the primary Wi-Fi base station ➊ is out of wireless range of the extended Wi-Fi base station ➋, therefore the extended Wi-Fi base station cannot join or extend the wireless network. The extended Wi-Fi base station must be moved to a location that is within Wi-Fi range of the primary Wi-Fi base station.
Important Note
If another extended Wi-Fi base station ➋ is placed between the primary Wi-Fi base station ➊ and the extended Wi-Fi base station ➌, the extended Wi-Fi base station ➌ will not allow clients to join it. All extended Wi-Fi base stations must be in direct range of the primary Wi-Fi base station.
A "roaming network" that Bob described, in which all base stations are connected with an Ethernet cable, is by far the best alternative.

I've bought Mountain Lion but my iMac's HD isn't the correct format (Mac OS Extended(Journaled) instead of GUID partition what do I do?

Can I just back up to Time machine, then reformat disk then re down load?

As mende1 stated, the two are different and must be both.
If you open Disk Utility and select the hard drive (the type, size, and serial number), not the volume (Macintosh HD), it will tell you at the bottom of the screen what the Partition Table is. It should be GUID. If not, then you will need to back it up, then repartition the drive. Also, copy the Mountain Lion installer onto another drive so you don't have to download again. It is in the Applications folder.
There are a few methods to get back where you are, including wipe, install old OS, restore from TM, install ML.
You might search the web for a tutorial on creating a boot/install disk using the Mountain Lion installer.
Another easy way is to use something like Carbon Copy Cloner or SuperDuper to clone your current OS onto another drive. Then, boot using the external you cloned. Use Disk Utility to re-partition the internal drive as noted below, then Clone your current OS back to the internal. Then, use the installer you tucked away to reinstall.
If running Snow Leopard, you need to boot using your install disk, then open Disk Utility.
If running Lion, you need to boot into the Recovery HD by holding down cmd-r on restart.
From there, open Disk Utility, select the hard drive, then the Partition tab.
Select 1 partition from the partition layout dropdown (or however you'd like, just don't use current).
Set the Name of the disk. Macintosh HD is the norm, but you can name it anything you want.
Set the Format to Mac OS Extended (Journaled)
Click the Options Button.
Set the Partition Table to GUID Partition Table.
Back on the partition tab, click Apply.

Extend a network in osx mountain lion

I've just upgrade to osx mountain lion. Apple care rep advises that with new os - once all my airports are reset - that mountain lion automatically "joins" and "extends" a wireless network. I notice no increased extension to the network.

Hello ben santa fe,
Nothing has really changed from Lion to Mountain Lion on the topic of "Extending". Same AirPort products, same AirPort Utility. Same software.
The "Extend" feature remains as it always has....a hub and spoke affair.
A "main" AirPort creates the network and various AirPorts can "extend" the signal, but all of the remotes communicate to the main AirPort...regardless of their location in relation to other remotes.
Not sure what you were hoping to see in the form of "increased extension" to the network. Can you clarify on that?

When is Mountain Lion going to extend to MacBook 2008?

When is Mountain Lion going to extend to MackBook 2008?

That would require speculation......and is not really allowed here.....besides Apple moves forward with their hardware and software and not backwards.....I would not count on your early 2008 MacBook (or mine) being able to run Mountain Lion ever......

I can't install OS X Mountain Lion due to wrong partition scheme.

I just bought and downloaded Mountain Lion on my Mac. Now I'm trying to upgrade but seems to fail.
I made a second partition on the same drive last year to put in Gentoo (unix) on one and by so used a double boot. When i released Gentoo from the harddrive i could no longer make it one partition.
Now it says that I don't have the right partition Scheme and tells me how to change it. Only problem is that I can't change the partitions. At all.
What should I do? Clean install? How?

In Disk Utility, where you were, in the left hand column in the window highlight the Hard Drive that the Partitions are on>in the upper right portion of the window click on the betton "Partition">below that a diagram showing your hard drive with its various partitions will appear> click on one of the Partitions shown that you want to Remove, to highlight it, and click on the "Minus" symbol at the bottom of the column>this action will Remove That partition only. Repeat these steps for each Partition that you want Removed. Do NOT remove the Partition that your Main OS is on that you want to keep. And Removing each of those Partitions will of course DELETE ALL THE DATA contained on each one. Make backups before you start of anything you want to keep off of them.
Hope this helps

TS2986 How to change volume scheme when I install OS X Mountain lion?

I try to update OS X Mountain Lion after setup boot camp , When I select the disk. The following warning msg occur :
"This disk doesn't use the GUID Partition Table scheme. Use Disk Utility to change the partition scheme. Select the disk, choose the Partition tab, select the Volume Scheme and then click Options"
But I c the disk options button is Disable. How to enble it and update OS ?

Flip4Mac is not currently compatible with Mountain Lion. Go to their website and download the latest beta version.

How do i upgrade my hard drive and get it to boot in Mountain Lion?

I have a Late 2009 Macbook 6,1 and want to install a new, larger capacity hard drive. Currently I am running Mountain Lion and don't have any install disks, so the question is, what is the process to change out the drive and get the Mac to boot after the new drive is installed. Since it is a new drive it won't have a recovery partition or any operating system files. My plan is to migrate my data using my Time Machine backup, but I worry that when I try to boot after the new drive is installed, all I will be greeted with will be a flashing question mark. I'm really having a hard time finding a step-by-step set of instructions for someone attempting what I'm trying to do. I do have an external enclosure I could put the new drive into before I put it into the Mac. Would I try using something like Migration Assistant to transfer all of the files to the new drive and then just swap out drives afterward? Would the OS migrate as well, or would I still not have a bootable drive? Or is there some kind of minimal boot disk I could burn onto a CD or flash drive and then once the machine boots go with a restore from Time Machine Backup? I'm open to any ideas anyone may have on the least painful way to go about this process. Maybe use some (hopefully free) software of some sort to clone the current drive onto the new drive while it's still in the external enclosure? Any help or ideas would be greatly appreciated!

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

Extending AD Schema Mountain Lion ML 10.8

Similar Messages

Maybe you are looking for