Extending an existing wireless network using an Airport Extreme (dual band 802.11n)

Hello,
I currenlty have a wireless network set up inside my apartment using a Linksys E1000 wifi router.  I would like to extend the network into a second room using my airport extreme.  However, I have tried to set up the airport extreme to extend a network and it tells me that it cannot extend my currently network.  I have already restored my airport extreme to its factory settings (using the reset button on the back of the airport extreme) as I used to use the airport extreme as the main base station in my previous apartment.
Help please!

Unfortunately, Apple's "extend a wireless network" function was designed as a proprietary feature that only works with other Apple routers.
It would be extremely unlikely that it would work with a router from another manufacturer if you are trying to "extend" using wireless only.
Suggest that you use another Linksys "repeater" or "extender" to insure compatibility with your current router.

Similar Messages

  • Configuring WDS w/ Airport Extreme Dual-Band 802.11n & Express 802.11g

    I currently have an Airport Extreme Dual-Band 802.11n Model: A1301 (located downstairs) and an older Airport Express 802.11g Model: A1084 (located upstairs) which I had been using to stream iTunes to my upstairs stereo (which worked flawlessly). Recently a friend of mine recommended that I reconfigure my network to a Wireless Distribution System setup which would allow me to create a remote wireless node which improves my wireless signal strength upstairs, allows an interface to Airplay to play our music from our iPod's/Pad's and also provides an hard-wired Ethernet connection for my newly delivered Network Extender for my cell phone. So I followed the URL: support.apple.com/kb/HT4262 to assist in this conversion and found that I was unable to configure my network as desired. While this documentation is very good, there is one snafu that I worked out that finally allowed a successful setup. Follow the instructions for:
    - Connecting a WDS main base station to the Internet
    - Configuring a WDS main base station
    - Configuring a WDS remote base station (See last line of instructions for the correct WDS Main ID)
    Ensure all Wi-Fi base stations are powered on and allow them time to appear in the AirPort Menu Extra.
    From the AirPort Menu Extra, select an 802.11g Wi-Fi base station to configure as a WDS remote.
    In AirPort Utility, select the WDS remote Wi-Fi base station in the Base Station Chooser, and click Manual Setup.
    Select the AirPort icon from the Toolbar, and click on the Wireless tab.
    From Wireless Mode select Participate in a WDS network.
    Click on the WDS tab.
    From WDS Mode, select WDS remote.
    Enable Allow wireless clients (see the first note below).
    If not already supplied, enter the 2.4Ghz AirPort ID of the WDS main, then click Update.
    There are two Apple ID's for the dual-band Extreme (2.4 & 5.0Ghz). Be sure to use the 2.4Ghz ID which is listed under the "Summary Tab" of the utility. What is confusing is that in the AirPort Utility, when you position the mouse cursor over the graphic of the Extreme on the left-hand side of the GUI, you are presented with a yellow dialog box which displays the 5Ghz ID and this can be misleading especially when you are trying to connect to an older 2.4Ghz Express ...

    My Express is the A1264 802.11n model. My Extreme is the A1354 model.
    The most crucial issue is the the Tivo, because the Premiere only works with Ethernet (I dont' have and wont' buy the upgraded wireless doohickey), but of course I would prefer that the Express also act to extend the signal, and I particularly want it do so using WEP access (or nothing, see below), since I have a second Tivo which ONLY works wirelessly and which ONLY works using WEP, not WPA.
    Since there were so many different issues and needs going on, I was excited about the Dual Band because it meant I could potentially get 5G speeds for my iPad and perhaps the Tivo Premiere connection, while allowing a completely separate band for the OLD Tivo.
    The other option I've been trying out (to accommodate the Tivo2 that can't handle WEP) is having no security, but making the networks hidden.
    A third option I tried to make work was to create a "guest network" for just the Tivo2.
    But what I'm finding out (it's what I always struggle with...networking is a nightmare.) is that if you take one from Column A, Column B disappears, so to speak.
    The way it used to work on the non-dual band Extreme was as I mapped above, and the Tivo2 and my iPad used the wireless signal with no problem while the Express was Ethernet connected to the TivoPremiere, but it did so using WDS, which doesn't even seem to exist as a possibility, forget teh fact that it undermines the speed boost (so I read)
    I've frankly never been able to understand the differences between the various modes and structures, and believe it or not I'm very smart and very comfortable with computers and Macs, having worked on them for 25 years.
    And one of the biggest reasons I've had such a hard time is because of the many times that I have updated after making changes, Airport Utility tells me it worked, but nothing happens and then after too much frustration I end up unplugging and shutting down every single piece of equipment and rebooting everything and then it DOES work. Sometimes. But I can't be doing that every time I make one tweak, I'll go insane!
    And the number of pin-resets I've done on the Express, the Dual band, and even the cable modem would make your head spin!
    So there's my story. Kinda. Does it make any sense? At least in terms of my goals?
    Your help is more appreciated than you can imagine.

  • Airport Extreme dual-band 802.11n Wi-Fi & new XBOX 360 Slim

    I'm having issues getting my new XBOX 360 Slim to connect to my dual-band Airport Extreme when using wireless n. I can get it to connect with n but my connection speed on the 360 drops to 1 or 2 mbps, even though the signal remains strong. I can see the speed drop of the 360 using Airport Utility on my laptop. All other devices on the network are fine. When I switch the 2.4 GHz band on the AE to b/g only, then the connection speed on the 360 shoots up to 54 mbps. That of course neuters the rest of my wireless n devices to g speed since most connect to the 2.4 GHz band due to the limited distance of the 5 GHz band.
    Short of finding a solution, my next step is to try a different router brand. I'd rather stick with Apple, but have had more issues with 2 AE models than all of my other Apple hardware combined.

    I had a three year old XBOX 360 before with a newer external n adapter. I use the 360 to do a lot of streaming video from my computers so the n definitely came in handy. The external n adapter worked great with the AE. Unfortunately that 360 died so I bought one of the new ones as a replacement. They must be using different hardware for their new internal n adapter than their previous external n adapter.
    My first step will be exchanging the new 360 tonight to see if it is isolated to just that machine. If it isn't, I'm going to try a new Logitech router just to see if that makes a difference.
    Again, I can maintain a connection to n just fine with the AE, but the speed is dismal. In g the speed and connection are just fine.
    I have not tried disabling encryption simply because I wouldn't run my router without it.

  • How do I extend an existing wireless network using airport express?

    Hi all,
    I am trying to extend existing wireless network using airport express, my main router is Belkin

    Unfortunately, Apple's "extend" feature is designed to only work with other Apple routers if you are trying to "extend" using wireless only.
    It is extremely unlikely that this feature would work with a router from another manufacturer using wireless only.

  • Extending an existing wireless network using Time Capsule

    I connected my Time Capsule via Ethernet cable to my network. I used the airport utility to extend my existing wireless network (Cisco router)k. After that my wireless devices were disconnected and I got a message stating "Unable to join wireless network". The macbook that I used to set up the Time Capsule showed a message along the lines that a device on the network was trying to use the macbook's IP address, I changed the macbooks IP address and then was able to connect my ipad and iphone to the wireless network but the connection was unusable as it was so slow. has anyone done this successfully and if so do you have nay advice

    If you connect the TC to the network by ethernet you do not extend an existing networking.. indeed you cannot.. only works with apple routers and no ethernet.
    You create a wireless network.. you can use roaming .. ie use the same wireless name and security settings as the existing Cisco router but you must set different channels.
    If you need instructions in that setup what version airport utility are you using. I would strongly recommend a version 5.. it is so superior cf toyland v6.

  • Extending an existing wireless network with an airport express

    My wireless signal is quite weak in my room so I'm looking for a way to extend the range of the network by using an airport express. I understand i can't do this wirelessly but is it possible to run an ethernet cable from my existing router to the airport express in my room and then have a stronger signal in my room?
    Thanks in advance!

    Welcome to the discussion area, Aaron!
    If you connect an ethernet cable from your existing router to the AirPort Express, and then configure the Express to "Create a wireless network" with the same name, security settings and password, this will in effect, extend your current wireless network.
    The Express must be configured as a "bridge" to operate correctly on your network when you do this, meaning that the setting for Connection Sharing on the Express will be set to "Off (Bridge Mode).

  • Can I create a second wireless network using an Airport Extreme?

    Does anybody know if the following is possible?
    Cable Modem wired to Airport Extreme 5th gen ->   Wireless Internet via Guest Account ->   Airport Extreme 5th gen->
    Create Secondary Private Network ->   Internet distributed Wirelessly to clients on Secondary Network  (Mac Mini, ATV 2)
    Thanks for any thoughts!

    Would it be possible instead to link a second Airport Extreme wirelessly to a secure network on the first,
    Yes, if you link to the "main" wireless network on the first AirPort Extreme.
    then create a secondary private network,
    No, but you could "extend" the "main" wireless network to provide more coverage and also enable the Ethernet ports on the second AirPort Extreme.
    If you connected yet another router to one of the Ethernet ports, you could configure it to create another wireless network with its own password.
    But cients on the "main" network would be able to "see" devices on the other "private" network and vice versa.

  • Extending Time Capsule wireless network with an Airport Extreme

    Hello - can anyone please advise about extending a wireless Time Capsule network by adding an Airport Extreme?
    I've looked at the Apple support advice - http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US -
    Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n) -
    but I couldn't seem to make it work. I don't know if it is different as I'm using Mountain Lion, but I cannot seem to locate a '

    Temporarily, move the AirPort Extreme to the same room or general area of the Time Capsule, power it up, and wait a full minute.
    Then, hold in the reset button on the back of the AirPort Extreme for 9-10 seconds, then release. Allow a full minute for the AirPort Extreme to restart to a slow, blinking amber light.
    Close AirPort Utility if it is open.
    Click the fan shaped AirPort icon at the top of your Mac's screen. Wait a few seconds for the listing of New AirPort Base Station to appear.
    Click on AirPort Extreme just below that and AirPort Utility will open automatically open and analyze your network settings. In the example above, this is shown as an AirPort Express. In another minute, you will see that it will configure the AirPort Extreme to "Extend" the network.
    Enter a device name that you want to use and click Next
    Wait another minute for AirPort Utility to configure the AirPort Extreme. When you see the message of Setup Complete, click Done.
    Move the AirPort Extreme to a location that is approximtely half the distance from the Time Capsule to the area that needs more wireless coverage and power it up.
    You are all set.

  • I have a dell deshtop about 3 months old i want to connect it to a wireless network from an airport extreme base i am having no luck please help

    i have a dell desktop computer, i am needing to set it on wireless network using an airport extreme base, i am having no luck please help

    What OS is the Dell running?

  • I am unable to join my existing wireless network with new AirPort Express

    I am unable to join my existing wireless network with new AirPort Express.
    I am using a DLink DI-524 Router, Windows 7 (64), and the AirPort Express.
    AirPort Utility will not recognize the AEX wirelessly, it will only recognize it when it is connected by Ethernet. I can then configure the AEX and verify that the settings stick once disconnected and then reconnected. However, even after that, it will not recognize the AEX once disconnected from the Ethernet cable.
    I followed the suggestions of several other threads on these forums. But I am unable to get the AEX to work.
    Any suggestions? Thanks in advance.

    Welcome to the discussion area!
    It's almost always a security setting that causes problems when the Airport Express (AX) tries to join a third party wireless network. The AX usually does not "join" correctly and that's why you can't see it on your wireless network using AirPort Utility.
    Using an ethernet cable is still the more reliable way to configure and adjust the AX, but if you are want to try to configure it using wireless, you must return the AX back to factory defaults as follows:
    Power down the AX
    Hold in the reset button +and keep holding it in+ as you plug the AX back in to power
    Release the reset button after 10 seconds
    When it is set to factory defaults, the AX broadcasts a wireless signal with a network name like "apple network xxxxxx" where the "x's" are either letters or numbers. You must look for this network by clicking on the fan shaped Airport icon at the top of the screen. If you don't see this network, then click Join Other Network to search that way. Unless you connect to this network, you will not be able to configure the AX using wireless.
    Do you know the exact security type that your D-Link router is using? That is the key element in the process.
    Open AirPort utility, click Manual Setup
    Click the Base Station tab to establish a name for the AX, device password and adjust time zone settings
    Click the Wireless tab
    Wireless Mode....Join a wireless network
    Wireless Network Name...must exactly match your D-Link wireless network name
    Enable ethernet clients if you want the port to be active (your D-Link must be compatible with ProxySTA for this to work)
    Wireless Security...exact setting of the D-Link network. WEP security causes a lot of issues. Try to use WPA/WPA2 Personal, which is far more secure.
    Wireless Password...must match the D-Link network
    Click the Music icon to enable AirTunes
    Click Update to save settings
    Any luck?

  • Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

    Can I use the Ethernet Port  of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
    I have AE 5th gen
    looking to buy (from ebay) the AEX A1264
    Various computers, printers and hubs for the network
    Is this possible to do?

    Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
    Thanks Again.

  • I am trying to extend my existing wireless network

    I am trying to extend my existing wireless network beyiond an extreme and an express by adding a further express. Is this possible?

    This is not possible if you are trying to do this wirelessly, as Apple's "extend a wireless network" feature will only allow the signal to be extended one time.
    It is possible to have more than one device extend the network, but each extender must communicate directly to the AiPort Extreme....not to another extender.

  • Hi I am hoping to add my 2 TB time capsule to my existing wireless network using cisco dpq 3925 modem. I have two mbp one running Yosemite and the other os 10.7.5

    I have a time capsule 2TB model 1409. I would like to connect it to my existing wireless network (using a cisco DPQ 3925 modem). I have two mac book pro one running Yosemite and the other OS 10.7.5. The best I can do is to connect the TC to the Modem via ethernet. Have one of my MBP connect to the time capsule using a ethernet cable and have the TB set to bridge mode. In this configuration, both mbp and the iPad can detect the TC but when I try to connect it to the wireless network, using the same network name and password, the light flashes amber and I cannot detect the time capsule again.

    Correct..
    The best I can do is to connect the TC to the Modem via ethernet.
    The TC does not connect to non-apple routers by wireless.. well. It is possible but so poor a method that Apple seem to have eliminated it in the setup wizard.. I would take that as a good thing..
    If you cannot use ethernet you have two choices..
    Use another apple router that is plugged into the Cable modem.. eg a second hand Extreme Gen5 or the latest Express.. the Extreme is both cheaper and better.
    Or you can use a set of EOP (homeplug) adapters.. but they cannot be guaranteed to work so you should buy from a place that allows returns.

  • How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

    How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

    This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
    http://support.apple.com/kb/HT4145
    In particular, you would want to focus on the information regarding a "Roaming Network"

  • Can you add new AirPort Express Base Station Simultaneous dual-band 802.11n with a 1st Gen time capsule network

    Hi
    Has anyone tried using the AirPort Express Base Station with a first generation Time Capsule and used it to extend their network, while still being able to use the Simultaneous dual-band 802.11n on their network?
    Thanks in advance

    The first generation Time Capsule was not a simultaneous dual band device.
    If you add the "new" AirPort Express to the network and configure it to "Extend a wireless network", it will extend the one single band signal that it is receiving from the Time Capsule.
    In other words, the AirPort Express will not extend simultaneous dual bands in this type of setup...since it can only "extend" what it receives. You would need a simultaneous dual band Time Capsule if you want that type of functionality.

Maybe you are looking for