Extending Company code for Vendor

Hi Expert,
Please let me know if any method exist for extending company code for the vendor XK01.
1) Methods may be: LSM Methods
2) BAPI existance
I have to extend company code 3000 from 1000 using XK01.
But I do have many vendor list so want to update at one shot.
Regards,
Mahesh

Hi,
Use the tcode "MASS" as follows:
Enter
Object Type     LFA1
then in "Tables" tab select Vendor Master (Company Code) and then press execute button.
In next screen u see two tabs again .
Go to Data records to be created.
Enter the vendor and company code details and execute .

Similar Messages

  • Set up Company Codes for Contract Accounts Receivable and Payable

    HI,
    I need clarification on "Set up Company Codes for Contract Accounts Receivable and Payable"
    When a company code "ABCD" isn't set up for contract accounts receivable and payable (Menu path:
    SAP Insurance -> Collections/Disbursements -> Organizational Units -> Set up Company Codes for Contract Accounts Receivable and Payable), are postings on this company code "ABCD" within FS-CD not allowed and blocked ?
    Is it mandetory to specify company codes to post in Contract Accounts Receivable and Payable in SAP FS-CD.

    Yes .  It is mandatory to extend company code chart of accounts to CA/CR and FSCD.
    Srinivas

  • How to change company code in vendor master data?

    Hi everyone,
        I  have a problem, a vendor master data was created without assign a company code,how to assign a company code for the vendor after the recode was saved?
    Thank you.

    You can do this again with FD01 or XD01.
    Fill-in the vendor number you created and the company code where you want to create it for.
    Paul

  • How to derive Company Code and Vendor Number from CDHDR / CDPOS ?

    Hi everyone,
    This is my first post and my apologies if this is a wrong forum to ask this.
    I'm creating an analytic that will track changes to the vendor master.  I know that I have to look into CDHDR and CDPOS tables and that CDHDR.OBJECTCLAS = KRED.
    However, part of the requirements is to be able to filter the results by Company Code and Vendor Number as well.  How do I do this? How can I link CDHDR to LFA1/LFB1 to get the company code and vendor code?
    Any information will be highly appreciated
    Thanks!

    I think you would have gotten answers sooner in the abap forum :P. Anyways the change pointer tables are kept in a different format, not in the normal flatly structured tables. What this means is that the data which comes through the pointer tables are somewhat encrypted. The object class and id present you records; Each change in master data (where the option is set) is recorded in these pointer tables.
    I believe there is a function module for converting the data into a readable format; that data should have your company code/vendor number in it.  You cannot link the chdr and lfa tables directly- you will need to first convert the data from the pointer tables

  • Set Up Payment Methods per Company Code for Payment

    Hi All,
    Can any expert please suggest whether do we need to enter only paying company codes while defining the payment methods per company code or enter all company codes.
    Ex: We have 10 company codes for which there are 3 paying company codes. After defining the payment methods in the country, while defining payment methods per company code do we need to  define for only 3 paying company codes or for all 10 company codes. Because when you are paying through one company code on behalf of three company codes, how does it make sense having the payment method in company codes which are not paying. I hope my query is sensible.
    Thanks&Regards
    Srinivas

    Generally Payment method is defined for a customer at Company code level and Sales area level. Through Partner function we can control who has to make payment. In your case , if you need to define different customer as payer you can do so in KNVP table. while making sales order payment terms will pick from Payer of the Sold to patry customer.
    Not sure why do you wants to link to Company code

  • Set up Payment Methods Per Company code for Transaction

    Hi All,
    Can any expert please suggest whether do we need to enter only paying company codes while defining the payment methods per company code or enter all company codes.
    Ex: We have 10 company codes for which there are 3 paying company codes. After defining the payment methods in the country, while defining payment methods per company code do we need to define for only 3 paying company codes or for all 10 company codes. Because when you are paying through one company code on behalf of three company codes, how does it make sense having the payment method in company codes which are not paying. I hope my query is sensible.
    Thanks&Regards
    Srinivas

    Hi,
    You should define the payment method in all the 10 company codes regarding they are the paying or non paying company code.
    If you are not defining them they you will not have the option to select the payment for that particular company code.
    regards
    pbb

  • How to setup a company code for material management

    Hi,
    While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
    So can you help me , how to setup a company code for material management
    Help is appreciated
    thanks
    DIL

    Hello Sendil,
    You can maintain it with trns code OMSY or MMPI/MMPV.
    Hope this helps
    Regards
    Arif Mansuri

  • How to find expense and revenue of a company code for a particular period

    Hi Gurus,
    I am new to FI. I need to find out the revenue, expense and gross profit of a company code for a particular period.
    for eg: I need to find the revenue, expense and GP of a comapany code 'ZYZM' for the month of july. Is there
    any standard report for this or any way to see P&L statement for this period?
    Thanks and regards,
    Ashish Kumar

    Hi Ashish
    You can use report S_PL0_86000030 - G/L Account Balances (New)  for the period wise report.
    You can select as Mani mention P&L account statement type as X in dynamic selection and give the period for which you require the balance.
    The report will give you the three balances
    Opening
    Till previous period
    for the period
    Hope this report will help you.
    Regards
    Pankaj P

  • Hi what is the transaction code for vendor master delete

    hi
       what is the transaction code for vendor master delete? and customer master delete?
    thank u
    surya

    Hi
    There won't be any Deleting of customer and vendor completely
    we only BLOCK them
    FK05                   Block Vendor (Accounting)
    MK05                   Block Vendor (Purchasing)
    XK05                   Block Vendor (centrally)
    FD05                   Block Customer (Accounting)
    VD05                   Customer Block (Sales)
    XD05                   Block customer (centrally)
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Assign company code for subsequent settlement at Plany level

    Hi
    I am configuring "MM Subsequent settlement" in IMG
    In the step - Assign company code for subsequent settlement at Plany level" , i can not add my purchasing organisation and assign to company code. There is no option for "New entry" in the change mode.
    Could you please suggest?
    Best regards
    Vijay

    Hi,
    Assignment is only possible or necessary for purchasing organizations to which a company code is not assigned.
    SAM

  • Maintain company codes for MM

    The day we assign the plants to the company code, we have to do the settings i.e.,,
      in Maintain company codes for MM(T-code : OMSY).
    1.What's the siginificane(importance) of this?
    2.I have assigned the plants to the company code today,
       but forgot to do the settings on the same day i.e.,. maintain company codes for MM?
       Now what should i do?

    Hello Pavan,
    When you create a material master record, the control record must exist for the company code so without maintaining period in OMSY you will not be able to create the material master record.
    To Allow backposting or Disallow backposting you need to maintain indicators in this transaction.
    You can use, MMPV/MMPI if you missed out this setting.
    Hope this helps.
    Regards
    Arif Mansuri

  • Company code for applicant

    Dear   Experts,
                           I am fetcing the data for employement interview applications from pb4000 table using
    select pernr from pb4000 into table it where apsta eq '1' and begda in s_begda.
    my requirement to fetch it based on company code where does the field company code will have.. for applicant..
    waiting for your valuable responses.
    Thanks in Advance,
    Thanks and Regards,
    Thiru. R

    Hi Thiru,
    While doing the Initial Hring thro' PB 40 or PB10 you have to include the IT0001 in that infogroup. Then you can easily fetch the Company code for that Applicant.
    For more look at here for including the IT
    Personnel Management>Recruitment>Applicant Selection-->Change info groups
    It help you to fix ur problem

  • Blocking a company code for all transactions.

    A compnay code is having two plants assigned. No open documents in that company code.
    How to block the company code for any transactions including purchase document creation?
    However all the past data to be available for viewing and reference.
    Thanks in advance.
    Narasimharao

    Dear Narasimharao ,
    You can remove authorization from user profile to use this company code.
    And when someone try to save any documents , error message will be send.
    hope this could help you.
    best regards,
    Carlos Moçatto

  • Cannot change company code for functional location in PM module

    Dear Gurus,
    When I try to change the maint plant for topmost level hierarchy FL, I get error. So I cleared the data in organization tab (planning plant....) and tried to click location tab but receive warning (After changing PM planning plant, please check dependent objects) & cannot proceed. Kindly advice me on how I can change the company code for all the functional location in the plant.
    Thank you.

    Dear Gurus,
    Is there any way I can mass change the company code for all FLs?
    Thank you.

  • Validation for Company code for a vendor in LFB1 TABLE.

    Hi Experts,
    New to ABAP Objects!! I need to write a method which will have two input parameters Vendor number and company code. and i have check wether company code exist for given vendor number.
    Can any one send the code for the above validation.
    Thanks in advance for your help.
    -Chris.

    Hello Chris
    I have checked on ERP 6.0 and there is no standard class available for checking vendors.
    However, within your method simply call BAPI_VENDOR_EXISTENCECHECK.
    If the vendor exists but not for the company code the BAPI returns the message E522(FN):
    Vendor &1 exists, but is not created in company code &2
    You may have a look at classes beginning with CL_REEX..., e.g.:
    CL_REEXC_COMPANY_CODE          Company Code (T001)
    CL_REEXC_CONTROLLING_AREA      Controlling Area (TKA01)
    Regards
      Uwe

Maybe you are looking for