Extending Extendscript with C

I need to expose some C code to ExtendScript and I'm stuck.
The After Effects Scripting Guide doesn't say much about that topic, but the JavaScript Tools Guide does (both are downloadable from the After Effects Developer Center). The latter isn't specific to After Effects.
So it's no surprise that symbols referred to by that latter document such as kTypeInteger or TaggedData are not defined in a header belonging to the After Effects SDK.
I would suspect there to be another SDK, an ExtendScript SDK - but I can't find it. (EDIT: The second document indeed refers to an "Adobe ExtendScript SDK", but where is it!?)
Does somebody know?
My ultimate goal is to enable functionality for After Effects scripts that can't be done with scripting alone - such as accessing the clipboard and other things.

Found it.
It's the Adobe ExtendScript Toolkit and it comes with at least the CC Installation, probably with all installations that include an Adobe product that supports ExtendScript.
So I already had it on my hard drive.
The headers come at least as part of the samples.

Similar Messages

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme. Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260

I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. The recycled the drive i

I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. They recycled the drive immediately (like a fool I didn't ask for it back to get the data off it.) But luckily I have all my data on CrashPlan. I downloaded it and it worked great except I downloaded it to the desktop and not the original location so it got squirrely. I also have an external 1.5Tb drive that I wanted to make bootable so I installed Mavericks 10.9.3 . I then went ahead and installed it on the newly installed drive too.
I think that because I have a new drive Adobe thinks I have a news computer. I bought the 27" Mac brand new from Ebay and it came loaded with software, including CS6. I have a serial number for CS6 but Adobe said it wasn't valid. (I have owned CS2, CS4 and now CS6 which came preloaded onto the Mac by the seller who told me that the software was registered to the Mac???
I am going to re-download the backup but this time to the original location (I still don't think it will work with Adobe. What can I do about this?
iMac 27-inch, Late 2012
Processor 3.2 GHz Intel Core i5
Memory 32 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 675MX 1024 MB
Software OS X 10.9.3 (13D65)@

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

Which range extender works with the Linksys CIT400 phone?

Which range extender works with the Linksys CIT400 VoIP phone? Can I use any range extender from any other comany or does it have to be one from Linksys? I am not sure if the CIT400 uses standard frequences.
On a side note, where's the forum for the phones? I see one in the archives section which seems to be ready only.

You can use the Linksys WRE54G range expander. For that matter, any 2.4Ghz range expander will work. But what’s more important is what router you would be using the range expander with!! Which router are you using?

WRE54G wireless extender problem with WRT600N wireless router

My Vista laptops work fine with the WRT600N router but not with the WRE54G extender. On the other hand my XP laptop works fine with the wireless extender so I know that both router and extender are working. Linksys tech support told me that the WRE54G is not compatible with the WRT600N, which is simply not true. With my XP laptop the signal goes from poor (5-10 Mbps) without the extender to excellent (54 Mbps) with the extender. Also, the lower blue light on the extender blinks indicating data transmission. I can access the setup page of the extender only with the XP laptop and wired desktop computers but not the Vista laptops. I suspect there is a Vista network setting that is the problem. I've turned off the firewall but to no avail. I've also switched between mixed mode and G-only, which made no difference. Anybody have any suggestions?

pfl wrote:
I have a secure wireless network (WPA). Perhaps my 4-5 year old XP laptop is the only laptop on the planet that works with the WRE54G-WRT600N combination. But I can assure all the doubters that this laptop categorically works flawlessly when I would otherwise be out of range without an extender. Good luck to spalaw. Please let me know if you are get your WRT160n to work with the WRE54G, especially you're able to connect with a Vista laptop.
Hi
I am Afraid and wont be surprised if ya all people are nt able to use a N series Router with a G series Range Expander !
the Reasons is simple - N series is not BackWard Compatible as u check out the sources around. (Back Ward Compatible means compatible with the previous versions for its wireless Band , e:g - G band and B band.)
as far as my experience is concerned regarding the Range Expanders , me and my bud wasted a whole Week Configuring a WRT350N and WRE54G v3 , and it worked somehow on the seventh day for an hour and Lost the connection again! Dayumm !
and we tried setting up with the same expander with WRT54GS v7.2 , it worked like a charm.
Conclusion : " WRE54G is a g series 2.4 Ghz expander which will work fine with all g series router though may not work with N Serious routers."
and if you really wish to Use something which can actually Extend the range for ur N routers signals , Better go for WAP4400N !!!!!!
And if someone still wish to run around , wanna try some tweaks (which i dont preferr )!
for WRT600N , just enable 2.4ghz band . as Range expander doesnt support 5 Mhz.
Use Only standard Channels . e.g : 1,9,3,11 .(No Wide and stuff.)
Try using WEP encryption first . (cause thats how we made WRT350N worked for a while. sighs)
At last , Wish u Luck.
Pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

Has anyone tried to extend Spatial with a 3D primitive?

Has anyone tried to extend Spatial with a 3D primitive that for example can model buildings and tunnels? I am trying to add the polyhedron primitive next to the existing point, line, polygon model. I just want to hear some tips or ideas...

The plan is to make a new GType and new stored functions that recognize this GType.
A polyhedron could be of type 3008,3D and 8=polyhedron(=new). The elem_info
and ordinates contain multiple planes. Self-created stored functions would be
able to recognize this GType, e.g. area3D should give the sum of the areas of all the
faces of the polyhedron and should also work on Gtype=3003 and give the real area
of a 3D polygon instead of the projection.I wouldn't suggest this methodology if you are considering using any spatial indexing or
functions with your data.
There is a mechanism Oracle Spatial has for defining custom datatypes. It should only
be used with custom apps, i.e. it won't be usable in the context of applications that know
about Oracle Spatial data types.
The mechanism allows you to define you own element using an element type of 0, and using
the interpretation to define what you are looking at. You would also include an a supported
element type that approximates your geometry, and that element is the one that is indexed,
and the gtype entered is associated with that geometry. Your private functions could access
the 3d geometry when required. For instance, you want to have a 3d cube. It might look like this:
sdo_gtype=3002
sdo_elem_info=(1,2,1, 7,0,1, 22,0,2 etc.
sdo_ordinates=(0,0,0,2,2,2, 0,0,0,2,0,0,2,2,0,0,2,0,0,0,0, 2,0,0,2,0,2,2,2,2,2,2,0,2,0,0, etc
the 1,2,1 in the elem info array corresponds to a 3d line string that when indexed with a minimum bounding
volume encloses the 3d cube. The 0,0,0 and 2,2,2 in the ordinate array stored as the line string when indexed
include the bounds of the cube. Next in the elem info array are 7,0,1. The 7 means offst 7 in the ordinate array
and in this example is fixed. Next the 0 tells Oracle Spatial to ignore this element. The interpretation of 1 you define,
the number could be anything. Since it is my example, I'll say the 1 means this is the definition of the first face in the
x,y plane (i.e. the front face of the cube which faces me). I've set the ordinate array with the coordinates of that face.
Next in elem info comes 22,0,2 which is starting at offset 22 there is another element that Oracle spatial should ignore
(element type 0), and next comes 2, which might mean this is the second face definition, that I've defined as the right
hand side y,z plane.
etc.
The meaning of the interpretation value is only limited by your imagination.
Note while you can index three dimensions if you want, the only spatial functionality that supports 3d is a spatial
index and a filter query, and some lrs functions. You will not be able to run any operator except for SDO_FILTER if you
have a 3d index, and all spatial functions will only work on 2d.
Do not define your own gtype and expect to use spatial. it will not work.

Extended display with my MacBook?

Can I use an extended display with my MacBook?
I bought the "Mini DisplayPort to VGA Adapter" and hooked it up to a standard Dell monitor. When I try to set up the extended monitor in System preferences/hardware/displays, I do not see the expected "arrange multiple display" option and when I search for extended displays, I get a message that says:
"The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer."

Hello GDoyle2604,
I would recommend this article named Apple computers: Troubleshooting issues with video on internal or external displays found here http://support.apple.com/kb/ht1573.
I feel this would be the best advice for you.
All the very best,
Sterling

Procurement Card in SRM 7.0 Extended Classic with PPS

Could sometime tell me if we can implement Procurement Card functionality when you have SAP SRM 7.0 Extended Classic with PPS enabled. Appreciate any help in this regard. Thanks, Alisetty

Gurus:
Anyone have any idea about using Procurement Card when you have SRM7.0 Extended Classic with PPS.
I didn't find any lead on this and appreciate your inputs.
Regards,
Vijay Alisetty

URGENT: Extend EBS with APEX (new Tab Menu = Function/ html call to APEX)

Hello everyone,
we are trying to extend EBS with APEX applications:
- Created function XX with type = JSP (HTML Call = GWY.jsp?targetAppType=APEX&p=100:1)
If we add/ call this function on a standard EBS main menu, it works fine and calls the APEX page with the correct URL (configured on system profile "FND: APEX URL").
But we want to add these APEX functionality on a Level 2 Tab Page / EBS Subtab menu (Menu type = "HTML Sub Tab").
Is it possible to add the APEX page to this level?
I mean, add APEX page on a "frame" associated to the new EBS subtab menu (like a "region" on the EBS page) ?
Thanks in advance for any help or support.
AG.
Edited by: user8194796 on 16/Fev/2012 1:52
Edited by: user8194796 on 16/Fev/2012 1:54

Hi;
please check below thread and note and compare it wiht your steps
How to install APEX in R12 Environment
Regard
Helios

[svn:osmf:] 11139: Extending class with a 'processLoadingState' stub, invoked when load state is set to LOADING.

Revision: 11139
Author:   [email protected]
Date:     2009-10-26 03:02:38 -0700 (Mon, 26 Oct 2009)
Log Message:
Extending class with a 'processLoadingState' stub, invoked when load state is set to LOADING.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/media/LoadableMediaElement.as

Strobe was used to verify that the problem was not with my OSMF implementation. Since the results were the same, I am more supsicious of OSMF itself or the underlying AIR framework than the player implementation. Either way, the information I've seen says that progressive download of h.264 video is supported on mobile devices with AIR. It would appear that this is not true in all cases.
The issue has not been observed on not occur on the desktop. It only occurs with StageVideo enabled playback with autoplay on.
In the actual product the videos play one at a time. Once the user has finished with a video, the player clears the references to the media. These are OSMF calls; the media assigned to the player is nulled. If this is not sufficient for garbage collection, then I am at a loss as to how to proceed. My test uses four videos that are roughly 1 MB. If there is a memory use problem, then it would appear something is broken in AIR or OSMF.
I want to be sure I report this correctly. The code involved is more than a snippet, it's a media player designed to be embedded in an app. Do I need to include the complete implementation or will a description be sufficient?

Extending component with code behind

Hi,
I have read an article about extending components with code
behind:
http://www.adobe.com/devnet/flex/quickstart/building_components_using_code_behind/
I have a question about that. Maybe someone can help me.
Example:
{components/CartClass.as}
package components
public class CartClass extends DataGrid
public function CartClass()
super();
{components/Cart.mxml}
<?xml version="1.0" encoding="utf-8"?>
<shop:CartClass xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns:shop="components.*"
>
</shop:CartClass>
Everthing works fine but when i add:
<mx:columns>
<mx:DataGridColumn headerText="Title" />
</mx:columns>
between the shop:CartClass tag, Flex says:
Could not resolve <mx:columns> to a component
implementation
Anyone knows why?

"sjerry-" <[email protected]> wrote in
message
news:gcq38m$1rg$[email protected]..
> Hi,
>
> I have read an article about extending components with
code behind:
>
http://www.adobe.com/devnet/flex/quickstart/building_components_using_code_behin
> d/
>
> I have a question about that. Maybe someone can help me.
>
> Example:
> {components/CartClass.as}
> package components
> {
> public class CartClass extends DataGrid
> {
> public function CartClass()
> {
> super();
>
> }
> }
> }
>
>
> {components/Cart.mxml}
> <?xml version="1.0" encoding="utf-8"?>
> <shop:CartClass xmlns:mx="
http://www.adobe.com/2006/mxml"
> xmlns:shop="components.*"
> >
>
> </shop:CartClass>
>
> Everthing works fine but when i add:
> <mx:columns>
> <mx:DataGridColumn headerText="Title" />
> </mx:columns>
>
> between the shop:CartClass tag, Flex says:
> Could not resolve <mx:columns> to a component
implementation
columns is actually a property of the DataGrid instance,
rather than the
DataGrid class itself, so it needs to be in the same
namespace as the actual
DataGrid subclass:
<shop:columns>
<mx:DataGridColumn headerText="Title" />
</shop:columns>

How can i find out, if I am allowed to buy Photoshop CS6 Extended Student with my University?

Hello,
How can i find out, if I am allowed to buy Photoshop CS6 Extended Student with my University?
I go to the DHBW in Mosbach (Germany), and I am studiing engineering.
Can somebody say me am I allowed?

Almost certainly yes.
http://www.adobe.com/nz/education/student-eligibility-guide.edu.html

Extending BO with external library

Hello,
Is it possible to extend the functions available on BusinessObjects with third-party libraries?
For instance, we want to extend BO with a library with complex mathematical functions and have these functions available to the user on the interface.
Is this possible?
How can we do this?
What requirements must the library fulfill in order to allow seamless integration?
Thank you,
Marco Ribeiro

Hi Falvio,
There have been a lot of similar posts in this regard.
Check this link..This might provide you one of the solution
Re: Using a J2EE Server Component -> Library
Regards
Bharathwaj

Extending dreamweaver with custom ssi functions ?

Hi
I read many posts about ssi and virtual function. Il could'nt find answer to my problem.
i want to use all the capabilities of DW for ssi inclusion using php virtual function :
absolute path from site root, visual rendering in creation mode, automatic path calculation ...
but i don't want to use virtual function, because i'll won't be all the time on apache server.
i don't want to use native require or include php function because my framework need absolute path from site root.
I would liket to tell dreaweaver to treat myIncludeFunction() exactly as it does with virtual function.
so i was expecting to extend Dreamweaver with customs tags. I read part of the Frecnh manual, extending dreamweaver
but i couldn't manage to do this.
Someone know the issue, or extensions taht could do this ?
Thanks
(sorry if my english is not good, my french is better )

"Joris van Lier" <[email protected]> wrote in message
news:fghlrc$ka$[email protected]..
> Hi all, I'm looking for a way to extend the Dreamweaver
DOM object with
> custom functions.
> In this case I need to backport the copyAssets function
>
http://livedocs.adobe.com/en_US/Dreamweaver/9.0_API/dwr_pagecontent_cn_088.html
> for earlier versions of dreamweaver and reroute calls to
an existing of
> custom implementation.
>
> My idea is to create a Startup Item that uses the dom
object as prototype
> and extends or overrides certain functions, but then:
how should I tell
> dreamweaver to use that object instead of the normal
DOM?
>
> --
> Joris van Lier
I'm still looking for the preferred/recommended way of doing
this,
does anyone have a bright idea?
Joris van Lier

Extended Attribute with a UOM category of Unit

In version 6.1 how do you create a Numeric Extended Attribute with a UOM Category of "Unit". We would like to create a numeric extended attribute that has an available UOM of "Cnt". Since Cnt is available by default in P4P, we do not want to add it a second time to the "Other" Category. However when I go to create a new extended attribute, none of the UOM Categories include "cnt."

This issue has been resolved in Hotfix 6.1.0.2.7 (Patch 15998737). For more information, refer to Knowledge Document ID: 1377579.1 - Available Patches for Agile PLM for Process Version 6.1.

Extending Extendscript with C

Similar Messages

Maybe you are looking for