Extending Extreme off of Time Capsule

Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router.
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.
Am I doing something wrong or are these two devices not able to do what I'm asking?
Thanks

Temporarily, move the older Extreme to the same room or close proximity to the Time Capsule
Power up the older Extreme for a few minutes, then hold in the reset button on the device for 8-10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
On an iPad or iPhone, go to the home screen
Tap Settings
Tap Wi-Fi
Look for a listing of Setup a New AirPort Base Station and tap on AirPort Extreme just below that heading
The utility will open up and take a minute to suggest that the older Extreme will be setup to extend the Time Capsule network. Enter a device name that you want to use for the Extreme and tap Next
The utility will set things up for you. When you see the message of Setup Complete, tap Done
Now move the Extreme to a location that is about half way between the Time Capsule and the general area where you need more wireless signal. The more that the Time Capsule and Extreme have line of sight with each other, the better the network will operate.
To see if you can de-bug the Mavericks Mac, use the tip from LaPastenague to check the settings for iPv6.

Similar Messages

Extending my network. Time Capsule-Air Express and Extreme.

So currently my network is a time capsule in my basement and an airport express upstairs behind a tv in my living room. I have an extreme that I'd like to use to boost my signal in the back yard where I use the remote app on my iphone to control itunes. They are all 802.11n(?). I would like to place the extreme close to a basement window that has clear sight to the lower back yard area.
What is the easiest way to go about setting this up?
THX

Welcome to the discussions!
+What is the easiest way to go about setting this up?+
Assuming that your AirPort Extreme is the 802.11n version, (it has a square shape), here is how to setup the "extend" configuration with the Time Capsule. The AirPort Extreme must be positioned where it can receive a good signal from the Time Capsule.
I was not clear on whether you already had the AirPort Express setup to extend (you must have an 802.11n version of the Express to allow this), or whether you have it configured to "join" your wireless network for use with AirTunes.
_On the Time Capsule_
Open AirPort Utility
Click Manual Setup
Click the Wireless tab below the row of icons
Make sure that you have a check mark next to "Allow this network to be extended"
Make note of the exact Security setting that you are using
Update to save any changes
The Time Capsule will restart and you should see a green light in 15-20 seconds
_On the AirPort Extreme_
Open AirPort Utility
Click Manual Setup
Click the Wireless tab below the icons
Wireless Mode = Extend a wireless network (If you do not see this choice, hold down the option key on your computer as you click on the selection box)
Wireless Network Name = Exact name of your Time Capsule wireless network. (This should appear as a choice in the setup)
Enter a check mark next to Allow wireless clients
Wireless Security = Exact same setting as your Time Capsule wireless network
Wireless Network Password = Exact same password as your Time Capsule wireless network
Verify Password as above
Update to save changes
The AirPort Extreme will restart and you should get a green light in 15-20 seconds.

Problems wirelessly extending 5Ghz network with Time Capsule

Summary:
My Time Capsule wirelessly extends a 5Ghz "n" network provided by my Airport Extreme, but the Time Capsule frequently fails and stops providing Internet access to connected computers. I'm not sure if the problem is with the Time Capsule or with the Airport Extreme it's connecting to.
Setup:
Airport Extreme (dual band) connected to cable modem. It provides a 5Ghz "n" network and a 2.5Ghz "b-g-n" network. This is in the bedroom.
Time Capsule (non-dual band) joins the 5Ghz network and extends it. This is in the office, maybe 40 feet away, line-of-sight. There is a laser printer connected to the Time Capsule via ethernet.
My MacBook is set to join the 5 Ghz network, and since it's in the office, it ends up joining via the Time Capsule. This is the desired behavior, as connecting through the Time Capsule seems to result in the fastest possible backup speed.
There are no wireless devices, such as cordless phones, in the house. The microwave is NOT in use when the problems arise.
*The Problem:*
Frequently, the MacBook loses its Internet connection, though it is still connected to the 5Ghz network through the Time Capsule. When this happens, it can only see the Time Capsule it's connected through (and other devices that are connected to it) but no other devices on the network.
When this happens, other devices that are connecting to the 5Ghz network through the Airport Extreme can no longer see the Time Capsule or any devices connected to it, such as the laser printer or my MacBook. This includes the living room computer, which has never been able to complete a backup due to this problem.
The Time Capsule's and the Airport Extreme's indicator lights both stay green.
If I change the Macbook's connection to the 2.5Ghz network, it can see the devices connected to the Airport Extreme, but can no longer reach the Time Capsule.
*Unsuccessful Solutions:*
This was happening in a previous incarnation of the network, when I had a non-dual band Airport Extreme providing the main network, the Time Capsule connected via 5Ghz, and an Airport Express connected via ethernet to the Time Capsule to provide a b-g network.
I replaced the Airport Extreme with a new dual-band unit to simplify the setup, but it did not solve the problem.
Since the Time Capsule seemed to be the weak link in the network, I reported the problem and got the unit replaced, but the problem still persists.
I've reset both the Airport Extreme and the Time Capsule to their factory settings numerous times, and set them up again from scratch (no imported settings). I've gone in and made sure that there were no WDS settings leftover from the earlier configuration, as the 5Ghz network does not need it to extend itself.
*Plea for help:*
Is anyone else experiencing a similar problem?

Update
The other day, I modified the setup so that the Time Capsule doesn't extend the wireless network wirelessly, only through Ethernet (so the attached printer will work, but the computers will connect directly to the AEBS. The Time Capsule stayed connected long enough for me to do a full backup (125GB) from the downstairs computer.
I thought I had it "solved" (though extending the 5Ghz network would be preferable so the office computers can have faster backup speeds.)
But yesterday, I went to print to the Ethernet-attached printer, and it got only one page out before it disappeared off the network again, and the print job failed. I noticed it did it again, today.
So the problem is not tied to wirelessly extending the network.

Internet - AirPort Extreme (b/g) - Time Capsule - File Server

I've got a small office network where files are served off a Mac mini, and iMacs connected via 802.11n wifi to the wired mini via Time Capsule. I have a spare AEBS (b/g) that I was thinking of setting it up for iPhone and guest access of internet. To keep the mini and iMacs secure, the set-up would be:
Internet -> AirPort Extreme (b/g) -> Time Capsule -> Mac mini and iMacs
The only issue I'm contemplating - the slower Ethernet ports on the Extreme - which I don't think is a problem for connecting to the Internet. Is there anything else I should be concerned about regarding network performance?
Thanks in advance for the collective wisdom!
Message was edited by: openarchitecture

That would work. The Ethernet ports on the AirPort Extreme base station (AEBS) is faster than your internet connection so you shouldn't have a problem.

Using an Airport Extreme and a Time Capsule at the same time

Guys I have had an Airport Extreme and a Time Capsule running together for nearly a year now and over the last few days the TC has been behaving badly. I changed its settings and now I'm in a mess. No, I can't remember the previous settings
Does anyone have a definitive list of the settings I need please? I have an ethernet cable modem, and the Airport Extreme is plugged into that as the main router. Two computers and the Time Capsule are plugged into the Airport Extreme using ethernet. The Time Capsule at the moment is just used as a network drive for Time Machine, but at some point I want to move it, with a long ethernet cable, and use it for extending the wifi in the house.
1. Should I connect the TC using its WAN port or one of the other ethernet ports? At present it's one of the other ones.
2. What TC settings should I use to have it function purely as a hard drive? At the moment there's some kind of conflict and my internet connection drops every 30 minutes.
3. Then later, what settings will I need to get the ethernet connected TC to extend the range of my wifi?
I read the Apple doc about WDS and tried setting the TC up that way. Then I discovered there is no WDS option in the AE Wireless settings. Only "Create a wireless network" or "extend a wireless network". The same setting on the TC has these options: "Create a wireless network" "Participate in a WDS network" or "extend a wireless network". Both devices have firmware 7.5.2. It didn't work with only the TC set for WDS, of course, but after that I can't get it back the way it was - which wasn't reliable anyway
Any help in exactly what the Wireless and Internet settings should be would be massively useful. Thanks!

If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
Use the same SSID and password for both machines. Computers will connect to the strongest signal.

Airport Extreme and a Time Capsule - config recommendations?

Hi!
So I find myself (in a fortunate position?!) with a new Airport Extreme and a Time Capsule.
I have very few requirements - I would like to be able to connect to the Internet wirelessly, and I'd like to be able to backup a couple of Macs using Time Machine (also wirelessly). I realise that the TC can provide me with that functionality nice and easily, but since I have an AE and a TC, I figure it would be good to make use of both, and so I wanted to ask if anyone had any recommendations for a useful configuration?
I think there are 2 basic options I could make use of (have I missed any?!):
1) Use AE as base station and connect the TC to it as an external HD
2) Use AE as base station and also make TC available for back up wirelessly
Does anyone have any thoughts on the above? If you'd recommend 2), what would be your suggested approach as I think I'm right in saying that 2) could be done in several ways? Roaming? WDS? Just setup TC as a stand-alone wireless box with no internet connection? (does this latter approach mean I could connect to the internet and backup at the same time - I'm guessing not?)
If 1) is the way to go, is it just a case of putting an ethernet cable between the 2 boxes?
Any thoughts would be hugely appreciated!
Many thanks

I would use the Time Capsule as the wireless base station connected to the modem. Then I'd use the Airport Extreme to extend the network or to create a roaming network (ethernet cable betwee the units), whichever worked best in the premises. Naturally, Time Capsule would be used for backups of all machines equipped with Time Machine. Have never hooked up any Apple equipment but from my understanding of it, this is what I'd try.

AirPort Extreme with 3T time capsule file security question

Right now I am using a MacMini with an external HD as a file server. I'm thinking g of using the new AirPort Extreme with 3T time capsule to do the same tho g (while also extended my wifi reach).
With the Mac mini I have fine control over who gets to see and do what to which folders and files. It seems that with the AirPort Extreme thee is no notion of permissions or access control -- if you can get on the wireless you can access the files. That is extremely insecure.
Is my understanding correct? Is there no way to secure files hosted on an AirPort Extreme so only certain users can access them??
- john

Are there any instructions for how to format and set HFS+ user permissions on the AP Extreme's HDD?
For the formatting part, you will need to temporarily connect the drive to your Mac, and then, use the Disk Utility (a part of the OS X operating system) to partition and format the drive. You should find this utility in the \Applications\Utilities folder. For HFS+, choose "Mac OS Extended (Journaled)" for the Format option.
For assigning user permissions using accounts, you will need to use the AirPort Utility.
Run the AirPort Utility
Select the Extreme, and then, click on Edit.
Select the Disks tab.
Select the HDD in the Partitions window.
Choose "With accounts" as the Secure Shared Disks option.
Click on the "+" button to add user accounts.
For each account desired, enter the Account Name, Password, and File Sharing Access type.
Click Save.
Click Update to write the new configuration information to the base station and wait for the station to restart.

Switching off the Time Capsule: risk of damage?

Hello everyone. If I switch off my time capsule (1TB, recently bought) when not in use, for example at night (I think to connect it to a power strip), could I damage it? Or maybe only if the TC hard drive is running?
Thanks

Welcome to the discussions!
This topic has been pretty much beat to death on the forums as there has been and will remain different schools of thought on this.
One school maintains that there is a very good reason that Apple chose not to even put a power switch on the device, and that is that it was designed to run 24/7. Powering off the TC causes it to lose its connection with the local network and internet. When the device is powered back up, these connections must be re-established. Also, when any electronic device is powered up from an off state, the components within the device are subjected to a sudden rush of current. The school thinking on this is that the device will last longer if the unit is left on and subjected to less stress.
The other school says power it down when not in use to save a bit of electricity. They don't buy the theory that a sudden rush of current has any long term effect on the device and claim that the device may actually last longer because the electronic components are subjected to less heat this way over time.
Choose your school, or maybe a middle ground that would have the TC powered off for long weekends, vacations or other extended periods when the device is not needed for backups.

If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and

If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops
Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and time capsule upstairs to get complete coverage

In theory, yes. If you configure the two base station into either an extended or roaming network configuration, you should be able to walk a laptop between routers and the laptop should attempt to connect/reconnect to the base station providing the stronger signal ... but, in reality, this is not always 100% true.

What is the best way to hookup my airport extreme with my time capsule ?

what is the best way to hookup my airport extreme with my time capsule ?

It sounds like you have the AirPort Extreme configured as the "main" router on your network.
If that is the case, connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule
Power up the Time Capsule
Connect another spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule, then click Manual Setup
Click the Wireless tab below the row of icons and make sure that the setting for Wireless Mode = Off
Click the Internet icon, the click the Internet tab
Insure that the setting for Connect Using = Ethernet
Insure that the setting for Connection Sharing = Off (Bridge Mode)
Click the Update button at the lower right of the window and wait a full minute for the Time Capsule to restart
Then power cycle the entire network by powering everything off....order of power down does not matter
Wait a minute
Power up the modem first, and let it run a few minutes by itself
Power up the AirPort Extreme next and let it run a full minute
Power up the Time Capsule next and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
You will need to reset the backup path from your Mac to the Time Capsule to get backups going again
Open System Preference (gear icon on the dock)
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backups or Use Disk and backups should begin again in a few minutes
If you do not want to leave the Mac connected to the Time Capsule by Ethernet, remove the Ethernet cable from the Mac to the Time Capsule, then log on to the AirPort Extreme wireless network

Only want certain things off my time capsule. Eg, I would like to take my music, but leave my photos. Can I do this?

Only want certain things off my time capsule. Eg, I would like to take my music, but leave my photos. Can I do this?

You have to restore whole libraries.. but if you want your whole itunes library you can do that.
See Q15 here.
http://pondini.org/TM/FAQ.html
Pondini has pages for each application and how to restore its files.. mainly emails, iphoto and itunes of course.

Magic Mouse extremely sluggish when Time Capsule starts

Why is my Magic Mouse becoming extremely sluggish when Time Capsule is backing up my data? This is really frustrating, I even stopped backing up my computer because the mouse is becoming almost impossible to use as soon as Time Capsule starts...
I've heard stories of interferences between Bluetooth and Wi-Fi, can anyone confirm that and provide me with a way to solve the problem? Thanks in advance.

UPDATE:
I think I've found a solution.... Though I'm a bit reluctant to post it already because I'd really like to see if it works over time... Anyway, here is the interesting post I found by Mr. Caliostro:
... sure, go into your Airport Utility application, inside Utilities inside Applications. Click on Manual Setup when your TC appears in the window. Click on the Wireless tab. You will find a pulldown menu there called Channel. Select your channel & Update your TC settings. I set mine to channel 1 to try it, & it made a tiny improvement. How close is your TC to your mac? Does the interference reduce if you ove further away? Perhaps swapping from 802.11g/n to 802.11n or vice-versa, may help? (depending if your setup can work on 11n-only). Perhaps switching from 2.5ghz to 5ghz or vice-versa may help? both 11n & 11g can work at 5ghz as well as 2.5ghz... Let me know how you go!
I set the 5GHz channel to 48 and the 2.4GHz to 1. Of course I changed these settings completely randomly since I don't know anything about these things but it actually seems to work pretty fine! No more sluggish mouse during Time Capsule back ups!

How do i take pictures off my time capsule and onto my new mac?

how do i take pictures off my time capsule and onto my new mac?

See Here > http://support.apple.com/kb/HT4083

Troubling extending wireless network with Time Capsule and Airport Extreme

I am trying to set up and extend a wireless network in my house, but it’s not working right. I have two Airport/Capsule units in the house:
2TB Time Capsule (Dual-Band II)
1 Airport Extreme (Dual Band)
I have the Verizon Fios router as my gateway to the internet, and also as my DHCP server. I have also tested the ethernet ports in my house to verify that they work, and that I can get a DHCP-issued IP address.
Now, my Verizon router has WiFI, and it’s still on. I am not using it though except to troubleshoot. So far as I understand, this should not cause a problem.
Base station setup
So I setup the TC to Create A New Wireless Network, on the ethernet network it’s on (Dlink switch plugged into Verizon router). I set it up in Bridge Mode (as opposed to having it dole out IPs, since the Verizon router does this already). The TC gets a valid IP, and my wireless device connect to it without a problem. I have checked “Allow this network to be expanded” under Wireless settings.
Extended station setup
The AE Dual-Band is plugged into the Ethernet, and is reset to Factory Settings. I name it “Airport Extreme 2” and I chose “I want Airport Extreme to join my current network.” The other two options are: “I want to create a new wireless network” and “I want to replace and existing base station or wireless router with Airport Extreme.”
I chose to “join,” I select “I want to connect Airport Extreme to my network using Ethernet to extend my existing wireless network.” The other options are to disable wireless entirely, or to “wirelessly join my current network.” On the next page it asks me to select the device or network that the Airport Extreme will connect to using the Ethernet. I set it to the Time Capsule.
Results:
Access near the Airport Extreme 2 is incredibly slow. Speedtest shows I am getting less than 1Mbps. Worse yet, my mail client won’t connect. It just times out.
What I had hoped was that the AE would connect via Ethernet to the network, and just bring the wireless network to the other side of the house. Instead it almost seems as though it is just re-amplifying the TC’s signal. Otherwise, why is performance so bad?
Thanks to anyone with some insight here!

Hello Kennuff. Welcome to the Apple Discussions!
Since you have the ability to connect all of the routers by Ethernet, there is no need to configure the Time Capsule (TC) & 802.11n AirPort Extreme Base Station (AEBSn) for a dynamic WDS (aka, extending a network). This option is only when the routers do NOT have an Ethernet connection between them.
Instead, you want to configure the TC & AEBSn in a "roaming" network. I suggest starting by performing either a "hard" or "factory default" reset on both.
Next be sure that both the TC & AEBSn are on the same Ethernet subnet coming from the Verizon-supplied router.
Configure the TC & AEBSn as follows:
AirPort Utility > Select the TC or AEBSn > Manual Setup > AirPort > Wireless
o Wireless Mode = Create a wireless network
o Allow this network to be extended: <not checked>
o Radio Mode: <leave the default or if you require a specific mode make sure both routers are configured the same>
o Wireless Security: <configure both routers the same>
AirPort Utility > Select the TC or AEBSn > Manual Setup > Internet > Internet Connection
o Connection Sharing = Off (Bridge Mode)

Connecting Airport Extreme N to Time Capsule via ethernet to extend wireles

Hi, I currently have 2 Airport Extreme N and a Time capsule and would like to connect all three together. I am planning to use the time Capsule as the router and then use the other airport extreme to extend the wireless network. I am planning to have ethernet connection between the three devices ie Airport extreme N (A) is connected to time capsule via ethernet and airport extreme N (B) is connected to time capsule via another ethernet.
I have tried the Extend Wireless network option to connect them, but that seems to generate so much traffic between the airport extreme N and the time capsule that the network is not usable. I have also tried using WDS but that didn't seem to work.
The three wireless networks have some areas of overlap but the signal is weak which is why i prefer to link them up with ethernet.
What is the best wall to configure them? should I set them up so that they're each creating a wireless network but with the same name? Or is there a better solution? Thanks!

It seems to me the easiest way is to have the Airport Extreme connect to internet using Ethernet, using DHCP and the Connection sharing in off (bridge mode) and then create a new wireless network with the same name... Is that correct? I have previously ran the apple wizard and it did something weird with the network and then both the time capsule and the airport extreme are serving out IP address and both of them have the same IP address 10.0.1.1. which then messes up everything...
Any ideas? thanks!

Extending Extreme off of Time Capsule

Similar Messages

Maybe you are looking for