Extending g wireless from Time Capsule using Airport Express...

Hi,
My Time Machine is working well and I have two old Airport Express units that I'd like to use as wireless extenders.
The Airport Expresses are the older type (i.e. only do 'g' wireless) and, according to the AirPort utility, they can't see the Time Capsule. My iPhone can connect OK so the 'g' network must be working.
Am I doing something wrong? Can I use my Airport Expresses to do this?
Thanks!

Thanks for the info. Your iPhone is connecting to the Time Capsule, not either of the AirPort Express devices.
In order to configure the AirPort Express devices to extend the wireless network, your Time Capsule Wireless Mode would need to be set to "Participate in a WDS network". You probably did not see this choice because it is "hidden". Hold down the "option" key on your computer while you click on the selection box to see if it appears.
I'm not necessarily suggesting that you try the WDS setup. It's an older technology that places a heavy bandwidth penalty on your wireless network in return for greater wireless coverage. The first Airport Express that you configure will cut the bandwidth of your network in half. The second will cut the bandwidth in half again. In other words, you are down to 50% of the original bandwidth with the first Express and down to only 25% with the second.
If you are getting acceptable wireless performance with the Time Capsule now, I would be tempted to leave well enough alone until you could add an AirPort Express "n" version, which would allow you to use the "extend a wireless network" setting. This is a much better performing arrangement and much easier to configure.
The WDS configuration is quite complex and frankly difficult for many users. To get an idea of the process, read over pages 42-44 in the Designing AirPort Networks Guide.
If you want to try this anyway, you will need reconfigure your Time Capsule and both Express devices to work in the WDS setup.

Similar Messages

Swapped From Time Capsule TO Airport Express - Constant Drop Outs

I recently switched my main network from Time Capsule to my Airport Express so I could play music etc... But since then every few hours I'll get an error saying the Time Capsule can't connect, then maybe 20 minutes later both the Airport Express and Time Capsule eventually start flashing yellow... If I leave it all overnight it just seems to fix itself or if I turn it off/on it all fixes itself... I have always had strange issues with Airport Express even one I had 2 years ago... But Time Capsule when I bought it I never had any dramas, the only reason I switched is so I could listen to music wirelessly... Are there any settings in Airport Express that I would need to look at? And also do I need to update any of my settings in Time Capsule to make it work better with Airport Express?

These are the logs if there is a guru out there who can see an issue would be much appreciated!
Jun 26 04:41:49 Severity:5 Initialized (firmware 7.3.2).
Jun 26 04:41:51 Severity:3 No Address for NTP server time.apple.com.
Jun 26 04:41:51 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jun 26 04:41:51 Severity:5 Rotated TKIP group key.
Jun 26 04:41:55 Severity:5 Internet Configuration leased -- host <10.1.1.2/255.0.0.0> gateway <10.1.1.1> dns <10.1.1.1> wins lease <3600> domain
Jun 26 04:42:00 Severity:5 Associated with station 00:1c:b3:74:eb:01
Jun 26 04:42:00 Severity:5 Installed unicast CCMP key for supplicant 00:1c:b3:74:eb:01
Jun 26 04:42:06 Severity:3 No Address for NTP server time.apple.com.
Jun 26 04:42:08 Severity:5 Associated with station 00:1f:f3:c3:3c:6a
Jun 26 04:42:08 Severity:5 Installed unicast CCMP key for supplicant 00:1f:f3:c3:3c:6a
Dec 05 00:16:00 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +13977217 seconds).
Dec 05 00:16:09 Severity:5 Rotated TKIP group key.
Dec 05 00:17:36 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:17:37 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:19:00 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:19:00 Severity:5 Rotated TKIP group key.
Dec 05 00:19:26 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:19:26 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:25:04 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:25:04 Severity:5 Rotated TKIP group key.
Dec 05 00:28:17 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:28:17 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:31:34 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:31:34 Severity:5 Rotated TKIP group key.
Dec 05 00:32:47 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:32:47 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:33:12 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:33:12 Severity:5 Rotated TKIP group key.
Dec 05 00:34:16 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:34:16 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:34:47 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:34:48 Severity:5 Rotated TKIP group key.
Dec 05 00:35:25 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:35:25 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:36:01 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:36:01 Severity:5 Rotated TKIP group key.
Dec 05 00:41:24 Severity:5 Internet Configuration leased -- host <10.1.1.6/255.0.0.0> gateway <10.1.1.1> dns <10.1.1.1> wins lease <3600> domain
Dec 05 00:42:20 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:42:20 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:43:45 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:43:46 Severity:5 Rotated TKIP group key.
Dec 05 00:44:01 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:44:01 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:45:40 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:45:41 Severity:5 Rotated TKIP group key.
Dec 05 00:45:49 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:45:49 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:46:15 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:46:16 Severity:5 Rotated TKIP group key.
Dec 05 00:46:24 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:46:24 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:47:08 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:47:08 Severity:5 Rotated TKIP group key.
Dec 05 00:47:16 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:47:16 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:48:10 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:48:11 Severity:5 Rotated TKIP group key.
Dec 05 00:48:25 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:48:25 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:49:57 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:49:58 Severity:5 Rotated TKIP group key.
Dec 05 01:04:36 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 01:04:36 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 01:05:05 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 01:05:05 Severity:5 Rotated TKIP group key.
Dec 05 01:09:29 Severity:5 Connection accepted from [fe80::21c:b3ff:fe74:eb01%bridge0]:56611.
Dec 05 01:09:31 Severity:5 Connection accepted from [fe80::21c:b3ff:fe74:eb01%bridge0]:56612.
Dec 05 01:09:31 Severity:5 Connection accepted from [fe80::21c:b3ff:fe74:eb01%bridge0]:56613.
Dec 05 01:10:34 Severity:5 Internet Configuration leased -- host <10.1.1.6/255.0.0.0> gateway <10.1.1.1> dns <10.1.1.1> wins lease <3600> domain

I would like to set up a media server on time capsule using airport express and an ipad as a remote for dance studio

I am wanting to set up a network for my business and was hoping if someone could tell me how to do this and if it will indeed work. Or if you have any better ideas.
I want to transfer all music to Airport Time Capsule. I want to plug in the aiport express to my sound system. I want to access music through the ipad off the timecapsule to play it without downlaoding it on the ipad.
We currently use Icloud, but there is too much music and too many devices accessing for it to work effectively. I am running a dance studio so we need more music than what could ever be stored on an ipad/ipod.
As an extention to this, can we use multiple Airport expresses plugged into mutiple sound systems to simultaneously access different music from the same time capsule?
Any ideas would be so great!

The answer is not if you use iTunes.
The TC is NOT an iTunes server.. it is not a media device at all. It is a backup location for Time Machine.
You need a computer in the network which stores the iTunes library and you can then play it via the ipad.
A mini with a large USB drive plugged in will work fine.. it doesn't need to be new.. a couple of years old mini will work just as well.
As an extention to this, can we use multiple Airport expresses plugged into mutiple sound systems to simultaneously access different music from the same time capsule?
I am not sure.. there will be network limitations to this.
Look up how to use itunes in a network.
http://support.apple.com/kb/ht4620
You would do better perhaps posting the question in iTunes section.. if as I guess you are actually using iTunes.

Do I need a cable connecting my Time Capsule to Airport Express if I want to use the AE to extend my wifi network range?

I'm a bit confused by conflicting advice given by my local Apple shop and my internet provider.
My cable modem is plugged into a Time Capsule which I use to access the net wirelessly almost all over the house. The one spot the wireless doesn't quite reach is (of course) where I now need my office and iMac to be.
I thought I could just plug in an Airport Express somewhere in the middle to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable. That's fiddly and would involve cables running under the floor or along walls and ceilings, not something I can or really want to do. It's not really practical to try and move the cable connection point either.
My internet provider suggested a netgear wireless extender and said that would only need to be plugged into power. The reviews of the netgear product I found comparing it to Airport Express suggest that the Express doesn't need to be connected to anything other than power either to extend a network range (which was what I originally thought).
So I'm wondering which advice is correct? I've also read that the netgear product isn't all that easy to set up so I'd rather stick with. Apple if it will do what I want.
Thanks for any help out there

I thought I could just plug in an Airport Express somewhere in the middle to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable.
I'm sure that the guy at the Apple shop means well, but he is not correct.
While it would be preferable to connect the Time Capsule and AirPort Express using a wired Ethernet connection, the Express can connect wirelessly and extend the wireless signal the same way....IF...it is located where it can receive a good wireless signal.

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

Extending a time capsule with airport express twice

Hi,
I have been trying to extend my existing wireless network recently but it never ended up how I wished...
I have one 4th generation Time Capsule (A1409) and two Airport Express 802.11n (1st generation A1264).
All currently have MAC Address base authentication and no security in place for was of testing (security not relevant at this point in time).
When I extend my Time Capsule with either Airport Express this works like a charm, the LEDs are all green and connection works for client devices.
When I extend my Time Capsule with both Airport Express the same applies, everything works.
However what I have found not to works it extending my Time Capsule with one Airport Express and then extending this Airport Express with the second Airport Express. While all LEDs are green and the second Airport is seen in the Airport Utility, I find no client are ever able to connect to it and alway either connect to the first Airport Express or to the Time Capsule. This is an issue I the area I want to cover is pretty big and I need the second Airport Express for the additional reach.
I haven't found anything against this setup, it however appears you can't connect to the second Airport. The Airport Utility would even accurately depict the situation with Airport Express one dotted line to Time Capsule, and Airport Express two dotted line to Airport Express one.
However no connection seam possible to Airport Express two.
I have swapped Airport Express one and two, and in this case Airport Express gets the clients and Airport Express one now extending Airport Express two gets none.
Is this an expected behavior, i.e. should I give up or is there anything I can do about this ?

However what I have found not to works it extending my Time Capsule with one Airport Express and then extending this Airport Express with the second Airport Express.
Apple's "extend a wireless network" feature will only allow you to extend the signal one level, not two. It's possible to have more than one device extending the signal, but each extender must connect directly to the main base station.....not to another device that is already extending the signal.
The Airport Utility would even accurately depict the situation with Airport Express one dotted line to Time Capsule, and Airport Express two dotted line to Airport Express one.
This is an illusion. AirPort Express is "joining" the wireless network.....not extending it. When the Express "joins" a network, it can be used for AirPlay, or a remote printer could be connected to the USB port, but the Express will not provide any additional wireless signal coverage when it joins a network.
Is this an expected behavior
Yes. I can try to look up Apple's support document that explains this if you want more information, but you may likely already have all the information that you need. Let us know.

Restore from Time Capsule using Migration Assistant

When I try to restore my backup from Time Capsule using Migration Assistant it cannot find any backups on Time Capsule HDD.
Time Capsule works just fine, using TC Application I can restore single files, there is also XXXXXX.sparsebundle file on Time Capsule HDD which I can mount with no problem and see all of my backups.
Where is the problem?

Hi,
I just ran into the same problem, neither the Migration Assistant nor "Restore from Backup" from the 10.5 Install DVD would find a valid backup on my Time Capsule (which kinda renders it useless).
After some googling and trial and error I found a workaround using Terminal. I don't know why mounting the sparebundle image with Disk Utility wouldn't work, but it isn't available when your computer crashed anyway... So here is my method:
-Boot from the System DVD, choose the language
(-Goto Utilities and start the Disk Utility and reformat your drive, if on Intel check that you partition it with GUID, NOT Apple Partition Scheme NOR MBR, restart from DVD) only if something went wrong with your disk like in my case
-Goto Utilities and start Terminal
-In Terminal first make a directory for the mount, type: mkdir /Volumes/MyBackup
-Then mount the Time Capsule and link it to the folder you created, type: mount -t afp afp://myuser:mypassword@IPAdressOfMyTimecapsule/VolumeWhereMyBackupIs /Volume/MyBackup
-The AFP-Volume is now mounted, but you can't see anywhere.
-Quit Terminal, this will bring you back to the 10.5 Installer.
-Goto Utilities and choose "Restore System From Backup"
-The Dialog will ask you for a Backup Source. You should now see your Time Capsule and an already mounted Time Machine Volume at the location you specified in Terminal.
-Select the Time Machine Volume and press Continue, it'll take a while you show you all the backups, choose the one you want, choose a destination, drink tea.

Question about Time Capsule and Airport Express co-existence

I have a new 3TB ME182LL/A Time Capsule attached to my wired home LAN, in bridge mode. It works fine both as an access point on the upper floors of my home and as a Time Machine device. I also have an Airport Express, whose function in my network is solely to control my whole-house audio system from ITunes. I don't need, want, or use the wireless networking features of the Airport Express. I just have an audio cable running from it to my stereo, and an Ethernet patch cable connects it to my wired LAN. The network mode in the Airport Express is set to "off". Historically, the Airport Express has worked fine in this wired lan mode. However, I unplugged it at some point while having some initial trouble deploying the new Time Capsule and only turned it back on today. After turning it back on I observed something strange. My speedy wireless connection upstairs via the Time Capsule became slow. And when I launched Airport Utility, it drew a network diagram which showed my Time Capsule as a CLIENT of the Airport Express. In other words, the network diagram showed Internet at the top, then a vertical line down the the Airport Express, then the Time Capsule below that. The correct / desired diagram would be the Time Capsule and Airport express as peers. I connected to the Airport Express and verified that network mode was set to "off" but the incorrect network diagram persisted (as did poor wireless performance) until I unplugged the Airport Express. After I did that, the Airport Utility drew the network correctly, although of course it showed a yellow caution sign next to the Airport Express, since it was down. And my wireless speed / reliability returned to normal. What is going on here?

The automatic setup in the airport utility has changed something.
Is the line down to the TC from the express dotted.. in other words is wireless??
Funny stuff happens.
Please post the screenshots of the 3 pages from the airport utility setup for both airport express and TC..
Make sure wireless is set to off in the express.
Both should be set to dhcp on the internet tab and both set to off bridge mode on the network tab.
So for example the bridge on the network tab.
The summary page can also be a help.
There is a half summary page when you click the item in the airport utility.
There is also a fully summary page, when you hold option key and double click the TC icon for example.

Time Capsule to Airport Express extension

I have recently set up a Time Capsule and Airport Express, the latter as an extension, without trouble. Needed further extension and purchased another AE. Although I get a green light on the second AE there is no extension of the WiFi to the area where the second AE is placed. I have re-set up all the components multiple times without success. Using Airport Utility 5.5.1 on a 27" late 2009 IMac, system 10.6.4. In advance thank you for any help.

Ok, here is the basic steps to configure your base stations into a static WDS:
(Note: To facilitate the WDS set up, temporarily connect the remote & relay base stations to the TC by Ethernet during the set up phase, and then, relocate them to the desired locations when complete. Also, jot down the AirPort IDs (wireless MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
Main Base Station Setup - TC
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
o Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the main base station, and then, choose Manual Setup from the Base
Station menu.
o Enter the base station password if necessary. If the base station is using the default password of public, you will not be prompted for a password.
o Click Wireless in the toolbar, and then, choose “Participate in a WDS network” from the Wireless Mode pop-up menu. Note: You will need to hold down the Option key in order to get this option on the AEBSn, 802.11n AirPort Express Base Station (AXn), or Time Capsule (TC).
o Click WDS and then, choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the base station you want to connect to this base station.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup - AX#2
o Open AirPort Utility; select the remote base station, and then, choose Manual Setup from the Base Station menu.
o Enter the base station password, if necessary.
o Enter the same network password as the main base station, if necessary.
o Click AirPort in the toolbar, and then, click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and then, choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
Relay Base Station Setup - AX#1
o Open AirPort Utility; select the relay base station, and then, choose Manual Setup from the Base Station menu.
o Enter the same network password as the main base station, if necessary.
o Click AirPort in the toolbar, and then, click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and then, choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS relay” from the WDS Mode pop-up menu.
o Enter the AirPort ID of the main base station in the Main AirPort ID field.
o Click the Add "+" button and enter the AirPort ID of the remote base station this relay base station will connect to.
o Click Update to transfer the new WDS settings to the relay and remote base stations.
(ref: Pages 42-46 of "Designing AirPort Networks.)

Apple TV Inference with Time Capsule and Airport express?

I have recently bought an Apple TV 2, which seem to be working fine, however since installing it on my wireless network both my Time Capsule and Airport Express can't be found. Following some fault finding it seems that when I unplug the Apple TV I can reconfingure the TC and AE.
The TC and AE are configured to join my existing network....and have happy sat there for a few years.
I would really welcome any ideas.
Thanks
R

Welcome to the discussions!
It sounds like you have the basic configuration covered correctly.
You might want to check some settings on the TC:
Wireless Mode would be create a wireless network
"Allow this network to be extended" should be checked
The AX should be set to "extend a wireless network"
The "allow wireless clients" box should be checked
In this configuration, the ethernet port on the AX is active so things should work.
A minor point...Although the TC is a dual band device, the AirPort Express is not. Can you make sure that that the Express is connecting to the "main" network on your TC? The "guest" network cannot be "extended".
If you place your laptop close to the Express and hold down the option key while you click on the AirPort icon, some connection information will be displayed. The MAC address of the device that the laptop is connecting to will be indicated. Make sure that that this is the MAC address of the AX, and not the TC.
Another note...If you have not changed the default "main" network, the radio mode is broadcasting 802.11n only at 5 GHz. These higher frequencies are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals. So, if you AX is some distance away, you may not be receiving a strong signal for the device at that location.
If you have a signal strength utility on your laptop (the "bars" at the top of the screen are not a very good indicator of actual signal strength), turn off the AX and take a reading to see what kind of signal the Express is receiving where it is located.
Please post back with your results.

Will Time Capsule or Airport Express resolve my WiFi problem?

Hi
I have a regular 2.4 GHz WiFi router which i am using currently. The problem is there are too many WiFi users around me and it seems my WiFi keeps turning off due to interference. I have tried chaning channels but all in vain. Initially I thought it was a router issue but now I have turned off WiFi completely and using internet on ethernet cable and it has been working fine without any disconnection. So definitely it is the WiFi interference problem. I really want to use WiFi as i want the mobility. Do you think using a time capsule or Airport Express resolve this problem?

It is troublesome. Use ethernet instead of wireless.
Reset the whole network to factory and start again.
Yosemite can see nothing that it does not setup itself it seems.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.

Why can't I print from my iPad using airport express

Why can't I print from my iPad using airport express?

Is the printer connected to the USB port on the AirPort Express?
If yes, Apple does not support printing from the iPad in this manner. Try another App like Printopia which should allow the iPad to print. There is a free trial, so you will know in a few minutes whether this will work.
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
Is the printer connected to the AirPort Express using wireless only?
If yes, you must have an AirPrint compatible printer to be able to print directly from the iPad. See if your model is AirPrint compatible in this Apple document:
http://support.apple.com/kb/ht4356
If your printer model appears, the printer may need a firmware update to enable the AirPrint feature. Contact the support folks at your printer manufacturer.
If the printer does not appear, try Printopia as above.

Why cant i print from my ipad using airport express but i can print from my mac using the express

why cant i print from my ipad using airport express but i can print from my mac using the express

Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

Can my old HP print from my iPad using airport express

Can my old HP print from my iPad using airport express.
If yes what can be done.
Thank you.
Merry Christmas

You might be able to get the iPad to print to the HP by installing an App like Print Central on the iPad.
There are no guarantees that this will work, so worst case you will be out about $10 U.S.
PrintCentral for iPad on the iTunes App Store

Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

Hello -
I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
Thanks a lot,
-TM
AirPort Exteme:
Time Capsule:

Hello JuliaApple. Welcome to the Apple Discussions!
You have several ways to configure both base stations for what you are trying to do.
The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

Extending g wireless from Time Capsule using Airport Express...

Similar Messages

Maybe you are looking for