Extending material to other sales area

Hi,
Can a material can be extended to a new sales area, which is having enitrely different Sales Org, Dist Ch & Div? If yes, Pls explain.
Regards,

Hi,
Just assign the sales org + Dist. Channel combination to the plant where this material is existing. But remember a material cannot belong to two divisions at the same time. You can fulfilll the requirement by maintaining the sal org, dist chan link to plant.
Pl reward if it helps.
Thanks & Regards
Sadhu Kishore

Similar Messages

  • Extend material and customer to other sales areas

    can u please let me know?
    How to extend material and customer to other sales areas? To extend material one plant to another plant what are the configuration you done in your project?

    <b>To Extend Customer master: T.code - XD01:</b>
    In XD01, enter Account Group, Customer Code, Company Code, Sales Organization, Distribution Channel & Divission. Also ensure to maintain reference Customer, reference Company Code, reference Sales Organization, reference Distribution Channel & reference Division --> Enter. Most of the fields will be copied by default, but some fields will not be copied & they have to be maintained in the same manner how we create a new customer.
    <b>To Extend Material Master: T.Code - MM01:</b>
    In MM01, Enter the Material Code & reference Material Code --> Enter.
    Select the Tab pages to be maintained & go to organization data & maintain the details like Delivering Plant & Reference plant, Storage location & reference storage location, Sales Organization & reference Sales Organization, Distribution Channel & reference Distribution channel & so on ...  --> Enter. Most of the fields will be copied by default, but some fields will not be copied & they have to be maintained in the same manner how we create a new material.
    Regards,
    Rajesh Banka
    reward point if helpful.

  • How to extend customer for other slaes areas

    i want to extend  my custoemr  for other slaes area other than existing sales area .current slaes area is com div and com dis chl

    Hi Amit,
    Another Way is, as you have maintained the Customer for common DC and division, you can make referenece of other sales area with this by T-code VOR1 and VOR2, then the customer with common division and DC will be appllicable for all SALEs area.
    Hope this will help.
    Thanks,
    Raja

  • How can i extend the customer  to other  sales area

    how can i extend the customer  to other  sales area

    Hello Harish,
      Once you have a customer (eg. 100002) in one sales area (eg. 0010/10/10), you open XD01 tcode, enter the same  customer number (100002) in customer field and enter sales area (say u want to create in 0020/10/10) in which you want to create the same customer. Now in Reference section, enter the customer number (100002) and sales area in which already the customer exists (0010/10/10). When you press enter, it allows you to modify the sales area data for the customer for new sales area.
    then save it.
    Hope it is clear...

  • Fast entry for extending customer master to other sales area??

    Hi,
    I have list of customer master, now the requirement is to extend 60-70% of the customers to a different sales area, Is there any tcode, like fast entry for extending the customer master to the new sales area??
    Thanks
    Ghanesh
    Edited by: Ghanesh Visu on Feb 24, 2010 10:55 AM

    Hi Ghanesh,
    Below are a few helpful links on how to use MASS.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/408104b5-8ad2-2c10-8383-9b07a2727c4e
    http://www.sap-img.com/sap-sd/sales-order-mass-change.htm
    http://sap-helper.blogspot.com/2009/03/mass-maintenance-processing-tcode-mass.html
    If you are using this tool for the first time, i would not suggest directly using it on Production.  Use it few times on Test client for making yourself familiar with this tool. It is a very powerful tool and changes made from this cannot be undone.
    You can also use LSMW to run mass data.  Few links for LSMW are as below:
    LSMW
    Thanks
    Kapil Sharma

  • Extend Material to Different MRP Areas

    Hi Friends!
    I want to extend a material to different MRP areas. Is this possible using BAPI_MATERIAL_SAVEDATA? I couldn't find the MRP area field(should be an input table holding multiple records) in the BAPI to input for extending the material.
    Or is there any BAPI/FM available for this?

    MRP fields are in the PLANTDATA structure.
    So I guess it should be here.
    What is the SAP name of the field you are looking for ?
    Erwan

  • Material Costing per sales area level

    Hi,
    We have requirement where we aer shiping the one material from two different sales areas.  we want to cost a material based on the sales area because the actual cost we are shipping to customer will be different between these sales areas.  Is it possible in SAP?
    ~Thanks!
    Rajesh

    Hi,
    There is no sales area based costing. you need to get the cost for each of the orign seperately.  You need to quote your price keeping this in mind. 
    Best Regards
    Surya

  • BAPI to extend material to multiple sales organisation

    Hi Experts,
    I need to know a BAPI for extending a material to multiple sales org. at one go. My requirement is detailed below:
    Suppose an user is providing the details as below:
    Material: 90000038
    Sales Org: 0011, 0022, 0033.
    I need a BAPI where I will pass these values at one go and the material will be extended to sales org. 0011, 0022, 0033. I have used BAPI_MATERIAL_SAVEDATA but of no use. I am not willing to use a BDC in this case where I will loop through the Sales Org. and extending the source material.
    Please help me its urgent.....I will reward points for helpful answers.

    Hi Mylene Euridice,
    Thanks a lot for your valuable response. But I want to implement this in ABAP. So can you or anyone else in the forum help me with a BAPI to do the needful as mentioned in my query.
    Thanks Abir.

  • Material listing in Sales area

    Hi
    Is it possible in SD to see  the material in a particular sales area do we've any particular tcode for the same
    Vinz

    Hi,
    You can see the Material maintained for a Particular Sales organisation/Distribtion combination in the Table MVKE
    Goto the Transaction se16 and enter the table MVKE and give the material,
    It will list all the Sales organisatons/Distribtion combinations for that material
    thanks,
    santosh

  • Issue in creating Finish Good Material for specific sales area

    I am trying to create a new "finished good material" through "MM01" , after selecting  "industory sector" & "Material type" I have also selected the views the next screen comes is for Organization level ,
    when I select Plant , sales org & distribution channel and press enter an error comes "Company Code 1000 is not set up for Material Managment".
    please help me out.

    hi,
    Check few things:
    1. Check whether the plant is assigned to the co.code which it is showing and the Material is maintained for the same plant...
    2. Check whether there is proper assignment of the porg to co.code
    Porg to plant, etc...
    If plant is not assigned to cocode then assign it in OX18....
    Or
    If you are using the IDES, then try with the other plant and material...
    Regards
    Priyanka.P

  • BAPI - To extend material to other plants (z program).

    Dear Friends,
    Please help to know the relevant BAPI can be used for below requirement:
    Material created one plant (Plant1).
    Same has to be extended to other plants (Plant2 & Plant3). Including price and all other data as is needs to be extended. I need to create u2018zu2019 transaction. Please help to know the correct BAPI that I can use.
    Thanks in advance for your help.
    Best regards,
    Lainel.

    Dear Wolfgang Valtin,
    You are right.
    Tested, Working fine.
    Thank you verymuch for your help.
    Resolved my query. Given points- 10.
    Thanks & Regards,
    Lainel.

  • Customer extended to wrong sales area

    Hi,
    We have 3 sales area,
    Sale area one :- 1000-10-20
    Sale area two :- 1000-10-30
    Sale area three :- 1000-10-40
    Customer is created in sales area one, we want to extend this customer to sales area two but by mistake it has been extended to sales area three. I want the customer only in sales area one and two and not in three.i.e in XD02 after entering the customer code, company code, after clicking customer's sales area only sales area one and two should be visible. How can I correct this.
    In similar way some of the views are been added in material master. How can I correct this.
    Vipin

    Hello
    You can use transaction VD06, but what you will do is you will only set a flag for deletion
    Deletion process is not that easy, because you could potentially have some documents created for that customer. so if system will allow you to delete completely, that it will create inconsistencies. If you want to delete the customer master data completely you will need to work with archiving process.
    Its better you only block the customer (please use VD05 for it)
    regards
    Rafal
    Edited by: Rafal Drezek on Jul 9, 2009 1:57 PM

  • One material extention to different sales areas and Act .***.grps?

    Hi,
    I have one material for which i need to extend the material to different distribution channels,divisions and account assignment groups in this case can i extend one material to different sales areas as mentioned above or i need to create one more material with same material master data except the sales view data?
    thanks.

    I have extended the same material to 2 different distribution channels and divisions but when iam checking in display view of MM for different distribution channels divions should be different as i have given divisions also different but in my case the last saved division only appearing for both different distribution channels.
    Second thing in MVKE table iam not able to find the division field(SPART)?
    Is iam missing any setting?
    Thanks!

  • Block material for Sales Area & Customer.

    Hi.
    I want to block material for particular Sales area.
    For that i used  "X-distr.chain status" &" DChain-spec. status" in Saleas Org1 Tab of material Master.
    Now in Sales Order Creation i am getiing Warning message as
    "Material 95343431321 has status:Discontd w/o Replace"
    Message No V1028
    How to Convert this warning to error so that it wont allow to Save Sales order?
    Also i want to Block material for Particular Customer How to achieve that???Any other better option than Material Exclusion???
    Reg.
    Amol

    Hi
    1.KIndly go to the below path
    SPRO-IMG-Logistics generalmaterial mastersettings for key fields Dat relevant for Sales and distribution-Define sales stauses-select the disct status ,details and maintin  as "B" in Block for order then system will give error message at the time of sales order
    2.Better option is through material  exclusion onle
    Regards
    Damu
    S

  • Extending Customer to Sales area

    Hi,
        I have a customer 1200000 with sales area (Sales organization S100, Distribution channel 25, Division 00), Now I want to extend the same customer 1200000 to same other sales area (Sales organization S100, Distribution channel 50, Division 00). Can anyone please suggest me any BAPI suitable for this requirement.
    Thanks & Best Regards,
    Yohan.Kanna

    Hello Yohan,
    You can try with the function module "SD_CUSTOMER_MAINTAIN_ALL" and also refer to the below link it might help you.
    https://scn.sap.com/thread/1986871
    Regards,
    Thanga

Maybe you are looking for