Extending Oracle BI SE One domain to support Oracle OSB

Hello,
does anybody know whether it is possible to extend Oracle BI SE One domain to support Oracle OSB?
I haven't found any note, nor blog where it is mentioned or if somebody has ever tried it.
Thanks!

If you have a weblogic domain any BI components configured then you cannot use this domain to extend any other BI component. However you can use the same domain to extend with any other non BI Oracle product.

Similar Messages

Forms 11g & soa suite 11g in one domain?

Has anyone tried to put both Oracle forms and soa suite in one domain. This will make management somewhat more easy as you can use one instead of two administation servers.

I suppose it would work in theory, but I doubt it would be supported.
John

Multiple AD FS Instances/independent AD FS Servers in one domain or forest

Hello together,
Is it possible to install multiple AD FS Instances on independent AD FS Server in one Domain or Forest? If yes, is that supported from Microsoft or best practice?
Best regards
Ulrich Greshake

Hi Ulrich,
Is it possible to install multiple AD FS Instances on independent AD FS Server in one Domain or Forest?
Yes, it is possible. Actually, multiple instances in a single ADFS farm are very useful for fail-over.
Here are some references below for you:
Active Directory federation Services Question - Can I run two seperate ADFS instances in my domain?
https://social.msdn.microsoft.com/Forums/exchange/en-US/3c8903c8-d6d6-471d-9966-b23c83172a40/active-directory-federation-services-question-can-i-run-two-seperate-adfs-instances-in-my-domain
ADFS Deployment Topology/Architecture
https://social.msdn.microsoft.com/Forums/vstudio/en-US/e85b1b06-9559-4028-b7cf-eed6582fe60d/adfs-deployment-topologyarchitecture?forum=Geneva
ADFS High Availability – Quick Reference Guide for Administrators. Implement Single sign-on for Office 365.
http://blogs.technet.com/b/ucando365talks/archive/2014/04/15/adfs-high-availability-quick-reference-guide-for-administrators-implement-single-sign-on-for-office-365.aspx#.VMnxiXkfpes
In addition, here is a dedicated ADFS forum below:
Claims based access platform (CBA), code-named Geneva Forum
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

More than one domain in the same library?

I use two Macs. In one I use iWeb to maintain two blogs and in the other I use iWeb to maintain two sites. I am giving one of the Macs to one of my sons and would like to use one Mac to work with both domains. Can I copy both domains to the same iWeb application support folder or will one copy over the other and destroy it? Will the same folder hold two Domain files or do I need to rename one of them? Thanks!

To add to Roddy's post I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process and move it to another location on your HD until you're satisfied the separation process is completed and what you want.
This lets me edit several sites and only republish the one I want.
OT

One Domain Controller, multiple Transport Landscapes - possible?

I would like to have ONE domain controller - configured in Solution Manager - to manage TMS configuration for ECC, BI, etc. I am looking at this domain controller to be the central point for CTS+ and ChaRM.   This means multiple Development systems and associated Quality Assurance systems.
DECC --> QECC --> PECC
DBI --> QBI --> PBI
Is this even possible?
The issue seems to be the standard '/SAP/' transport group for the 'SAP target for Default Layer'.   Is there a way to set up the standard SAP transport group to be uniquely identified in the domain controller if there are multiple SAP components supported by one domain controller?
Thanks in advance for the assistance ...

Hi Peter,
Thanks for the response.    My concern was the SAP default transport layer.   Another team member and I worked on this in more detail and I was able to successfully a specific SAP default transport layer for each of the Development systems and give each one a unique name.   I created the transport layers and transport groups and STMS accepted them, but we haven't actually used any of this yet so whether or not this is actually successful remains to be seen!    If
Regards,
Laura

How to manage one domain from another domain

I have created 2 domains domain1 and domain2. I deployed a web application in domain2 and created a managed server "newManagedserver-1" to run the application. From admin console of domain1, I need to control ie start/stop managed server "newManagedserver-1" created in domain2 by using the Node manager.
Please let me know if its possible and if so, please let me know the steps.

855557 wrote:
Ok thanks for information. I have following questions:
1)Is it possible for same domain to exist on more than 1 physical machine. I mean lets consider I create a domain domain1 in physical machine1 and same domain1 in physical machine2. Can I monitor managed servers of physical machine2 from admin console of physical machine1. Paths of the domain1 on both the physical machines being same(C:\bea\user_projects\domains)
2)If the paths of domain1 on both physical machines is different(for eg C:\CLOSR\install1\appserver\autodeploy\domain1 and C:\CLOSR\install2\appserver\autodeploy\domain1), then will the node manager functionality with admin server of machine1 and managed servers on machine2 work?---We can create one domain (domain1) and have different managed servers on two different physical machines.
Which means create a domain on machine1,and while adding a managed servers to that domain,
1)create 1 managed server (MS1) and provide the IP address of the same box(machine1)
2)create second managed server (MS2) and provide the IP address of the second box(machine2)
In this way we can create two managed servers on two different machines (machine1 and machine2), and as per your requirement monitor/manage the managed servers from machine1.
We don’t need to create a domain on another machine explicitly,however this configuration need few steps to be performed.
This concept is called Horizontal cluster,Following forum link will explain the same in detail.
Vertical and Horizontal Clustering
---Regarding having different paths for the same domain on machine1 and machine2,
We will not create a domain on machine 2 explicitly; the concept is creating one domain but distributing it on different machines.
So paths of the installation or the directory where we have the managed sever will not matter here.
The node manager functionality will work, provided we configure it correctly.
Following link will help you understand this in a better way.
http://download.oracle.com/docs/cd/E13222_01/wls/docs90/server_start/nodemgr.html
If you need the guidelines in node manager configuration (bit tricky) please let me know.
Edited by: user123456 on May 2, 2011 9:32 PM

Delay send to one domain

I and other users are encountering an issue with GW7 (7.0.4) where sending e-mail to one domain, the message will sit in the sent items until 12:00am, then finally send. The only instance where it goes quicker is if they server gets rebooted, or if you re-send the message, then it goes, but the original stays in the sent items until 12am. The domain we are sending to has a hyphen in it (I've found that can be a problem with GW) but I've not been able to find any solutions. Has anyone else encountered this ? Thanks.

* Poirier M wrote, On 08/23/2012 05:46 PM:
>> GWIA wasn't an issue. Once the MTA handed off to GWIA at midnight, the
>> message sent fine.
>>
>> I Found the setting that was gumming up the works :
>> In C1 > Tools > Groupwise System Operations > System Preferences >
>> Routing Options Tab > unselected 'MTAs to Send Directly to Other
>> GroupWise Systems'
>>
>> I don't know why that mattered since the domain in question is running
>> on exchange.
That's bizarre. Never needed that option so I have zero experience.
Thanks for the feedback
Uwe
Novell Knowledge Partner (NKP)
Please don't send me support related e-mail unless I ask you to do so.

Dns issues with one domain (Resolved)

i'm currently having dns issues with one domain, in that it won't resolve when I use bt's dns servers.
The domain is owned by a friend in the US who runs his own server for irc, web, and I also have a server that is on his connection, and resolves fine from other machines on different networks, and also resolves fine when I set windows to use the opendns servers, but when it's set to either my routers ip (using bt's dns), or set to automatic (using bt's dns via the homehub), this one domain will not resolve.
I'm pretty certain it's not a windows issue, as it's a clean install of windows 7 that I did yesterday. I've tried rebooting the homehub, and also flushing my dns on windows, but this has not solved the issue.
As I say, it resolves fine on other networks, and also when I use the opendns servers, so I know it's definately a dns issue.
Using bt's dns servers:
C:\Users\admin>ping chatnsn.com
Ping request could not find host chatnsn.com. Please check the name and try agai
n.
Using opendns:
C:\Users\admin>ping chatnsn.com
Pinging chatnsn.com [68.51.24.74] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 68.51.24.74:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
(The timeouts are normal...he has his router set to not respond to ping requests).
Has anyone got any ideas on how to sort this out? Preferably without having to phone the helpdesk...lets just say i've done it in the past, and according to the poeple I spoke to in india, I knew nothing about my own systems, and it was a problem at my end...which was not the case, and I proved this several times.
Edit: This issue appears to have resolved itself, and the domain is now resolving again using the homehub for dns resolution.

Hi,
When NSLOOKUP starts, before anything else, it checks the computer's network configuration to determine the IP address of the DNS server that the computer uses.
Then it does a reverse DNS lookup on that IP address to determine the name of the DNS server.
If reverse DNS for that IP address is not setup correctly, then NSLOOKUP cannot determine the name associated with the IP address.
http://support.simpledns.com/kb/a90/nslookup-cant-find-server-name___-default-server-unknown.aspx
Also refer to:
How to fix NSLOOKUP Default Server: UnKnown?
http://www.randika.info/2013/01/how-to-fix-nslookup-default-server.html
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT1107 I have registered 2 domain names . can I have more then one domain name on mobile me or icloud?

I have registered 2 domain names . can I have more then one domain name on mobile me or icloud?

MobileMe ends here at the end of the month so you will need to look into hosting your website/websites with another webhosting service.
I personally use IX Webhosting for a couple of reasons:
Fast reliable personal tech support by phone, instant chat, & email
They allow unlimited domains "www.yoursite.com", unlimited email accounts, unlimited bandwidth
And, price they are very reasonable plans start @ $3.95 USD a month
http://jeffnitschke.com/IXWebHosting.html

POWL OBN links do not open a pop up window in one domain

Hi
I am hoping to get some helpful information on a problem with a POWL OBN links not opening a pop-up only in one domain. The issue is described below.
We have deployed the BP for Buyer 1.0, SP15. One of the iViews we use is the My Purchasing Documents and we have enabled the query POWL_PR_MY. Our Portal Version is 7.0 SP21, ECC6 (no EHP).
Query POWL_PR_MY (My Purchase Requisitions) of POWL Application OPS-BUYER-POWL-PURDOC has links with the Purchase Requisition Number. Ideally when the links are clicked on, it should open up the Purchase Requisition transaction with the details of the item. This does not happen in our case.
Our Portal Server is on the domain main.nex.com, but is accessed from the domain drs.nex.com. The ECC is also on the main.nex.com domain.
When we access this application using "portal.main.nex.com", the links work fine as they should. But when we access the application using "portal.drs.nex.com", they do not open at all. There is no error message displayed. It just simply does not do anything.
We have added *.main.nex.com to our local intranet trusted sites and have enabled pop-ups, added the proxy exception
*.main.nex.com. All the Pop-ups are working from the other Custom Webdynpro application and from the other SAP GUI for HTML transactions in the portal from domain "drs.nex.com".
I am not sure what the problem is, but we are facing a problem ONLY with this application's links. I am not able to see anything in the nwa logs too.
Any pointers as to where I can look for issues?
Thanks
OJ

Hi Malte
No luck yet - so we are currently using portal.main.nex.com to access our portal until we find a solution. Will keep you posted. In the meanwhile, if you do find some information, please update.
Thanks
OJ

HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
Thank you for any help you can provide.
Arup

This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
In the meantime..
Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
ie
You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

[Fwd: Client accessing MBeanHome for more than one domain receives SecurityException]

Fwd'ing to security newsgroup
-------- Original Message --------
Subject: Client accessing MBeanHome for more than one domain receives
SecurityException
Date: 4 Mar 2004 07:27:33 -0800
From: Dinesh Bhat <[email protected]>
Reply-To: Dinesh Bhat <[email protected]>
Organization: BEA NEWS SITE
Newsgroups: weblogic.developer.interest.management
Hi,
When a client accesses MBeans of more than one domains (Weblogic 8.1)
that have
different passwords, it receives a SecurityException. This occurs when
the MBeanHome
for each domain is looked up at initialization and reused for each
request ( to
access MBeans ). The security exception does not occur if the MBeanHome
for each
domain is looked up for each request. On initial review, this behavoir
seems inconsistent.
Looking up the MBeanHome for each request may introduce a significant
overhead.
I am not sure if concurrent lookups would also cause the same problem.
I have read on another post that we can work around this problem by
establishing
a trust relationship between the servers, but this may not be feasible
when one
is monitoring a lot of servers and the overhead of configuration may be
an issue.
I have attached code that can reproduce the problem.
Please advise on the correct approach.
Thanks
Dinesh Bhat
Panacya Inc.
import java.util.ArrayList;
import java.util.Set;
import java.util.HashMap;
import java.util.Iterator;
import java.util.Hashtable;
import javax.management.MBeanServer;
import javax.naming.Context;
import weblogic.jndi.Environment;
import weblogic.management.MBeanHome;
* This class reproduces the Security Exception that is caused when a client tries to access
* MBeans of more than one domain with different weblogic passwords. Here is the stacktrace of the
* exception
* java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
     at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
     at weblogic.management.internal.AdminMBeanHomeImpl_811_WLStub.getDomainName(Unknown Source)
     at WLSecurityTest.getWeblogicInfo(WLSecurityTest.java:140)
     at WLSecurityTest.runTest(WLSecurityTest.java:75)
     at WLSecurityTest.<init>(WLSecurityTest.java:66)
     at WLSecurityTest.main(WLSecurityTest.java:51)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.intellij.rt.execution.application.AppMain.main(Unknown Source)
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
     at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:682)
     at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:181)
     at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:814)
     at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:299)
     at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:920)
     at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:841)
     at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
     at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
     at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
     at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
* Note: the exception is caused only when the MBeanHome for each domain is cached and used for subsequent
* transactions. The exception does not occur if the MBeanHome for each domain is looked up for each transaction. This
* would significant overhead in practice. Also the transactions across the various domains occurs serially, hence
* the effect of concurrent lookups has to be tested.
* Usage:
* This class has been tested with weblogic 8.1
* The class needs weblogic.jar in its classpath
* One can specify the weblogic details as System properties. The properties need to be specified in
* the following format:
* wls.host.n, wls.userId.n, wls.password.n where n is the weblogix instance number. Also specify
* the boolean system property reconnect.each.iteration to toggle between reconnecting or not reconnecting
* for each iteration. When not reconnecting for each iteration, the MBeanHome is reused and the Security Exception
* occurs.
* Following is the example of system properties
* -Dwls.host.0=localhost:7001 -Dwls.userId.0=weblogic -Dwls.password.0=weblogic
* -Dwls.host.1=localhost:7011 -Dwls.userId.1=weblogic -Dwls.password.1=weblogic1
* -Dwls.host.2=localhost:7021 -Dwls.userId.2=weblogic -Dwls.password.2=weblogic2
* -Dreconnect.each.iteration=false
public class WLSecurityTest
ArrayList wlsDetailsList = new ArrayList();
HashMap connectionMap = new HashMap();
public static void main(String[] args)
try
WLSecurityTest wlSecurityTest = new WLSecurityTest();
catch (Exception e)
e.printStackTrace();
* Constructor
* @throws Exception
public WLSecurityTest() throws Exception
int noOfTries = 10;
getWLSDetails();
for( int i=0; i <= noOfTries; i++)
runTest();
* Runs the test
private void runTest()
for (int i = 0; i < wlsDetailsList.size(); i++)
WLSDetails wlsDetails = (WLSDetails) wlsDetailsList.get(i);
getWeblogicInfo(wlsDetails);
* Get Weblogic details from System properties
* @throws Exception
private void getWLSDetails() throws Exception
wlsDetailsList = new ArrayList();
String hostKeyTmpl = "wls.host";
String userIdKeyTmpl = "wls.userId";
String passwordKeyTmpl = "wls.password";
boolean done = false;
for (int i = 0; !done; i++)
WLSDetails wlsDetails = new WLSDetails();
String hostKey = hostKeyTmpl + "." + Integer.toString(i);
String userIdKey = userIdKeyTmpl + "." + Integer.toString(i);
String passwordKey = passwordKeyTmpl + "." + Integer.toString(i);
wlsDetails.hostName = System.getProperty(hostKey);
done = (wlsDetails.hostName == null) || (wlsDetails.hostName.length() == 0);
if (!done)
wlsDetails.userId = System.getProperty(userIdKey);
wlsDetails.password = System.getProperty(passwordKey);
connect(wlsDetails);
wlsDetailsList.add(wlsDetails);
* Lookup the MBeanHome for the specified weblogic server
* @param wlsDetails
* @throws Exception
public synchronized void connect(WLSecurityTest.WLSDetails wlsDetails) throws Exception
Context ctx = null;
MBeanHome mbHomeLocal = null;
try
Environment env = new Environment();
env.setProviderUrl("t3://" + wlsDetails.hostName);
env.setSecurityPrincipal(wlsDetails.userId);
env.setSecurityCredentials(wlsDetails.password);
Hashtable hashtable = env.getProperties();
System.out.println(hashtable.toString());
ctx = env.getInitialContext();
wlsDetails._mBeanHome = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
catch (Exception e)
e.printStackTrace();
* Gets weblogic information using MBeans
* @param wlsDetails
public synchronized void getWeblogicInfo(WLSDetails wlsDetails)
try
boolean reconnectEachIteration =
Boolean.getBoolean("reconnect.each.iteration");
if( (reconnectEachIteration) || ((wlsDetails._mBeanHome == null) && (!reconnectEachIteration) ))
connect(wlsDetails);
MBeanHome mbHomeLocal = wlsDetails._mBeanHome;
String domainName = mbHomeLocal.getDomainName();
Set allMBeans = mbHomeLocal.getAllMBeans();
System.out.println("Size: " + allMBeans.size());
Set clusterMBeans = mbHomeLocal.getMBeansByType("Cluster", domainName);
System.out.println(clusterMBeans);
MBeanServer mBeanServer = mbHomeLocal.getMBeanServer();
catch (Exception ex)
ex.printStackTrace();
* Class that holds weblogic server details
class WLSDetails
String hostName = "";
String userId = "";
String password = "";
MBeanHome _mBeanHome = null;

If Server version is 61.
Make user "system" password of all weblogic servers same.
If Server version above 61(70,81)
In the Security Advanced Settings un check generated credential and specify a common credentail for all the weblogic servers(domains).

All plugins uptodate but on upload file get "USING one of the supported browser with latest Adobe Flash is required to experience enhanced file upload features

I am freelancer. When I tried to upload files on elance it give following error and disable the upload button:using one of the supported browser with latest Adobe flash is required to experience enhanced file upload features.
All plugins are up to date. Flash version 11.7 installed.

I assume Firefox 19 worked fine on the site?
Some sites may be mistakenly identifying Firefox 20 as Firefox 2, which is a very old version they probably no longer support. As a test, you could "lie" to the site about your Firefox version and see whether that little deception works.
This take a minute to set up. Here's how:
(1) Select and copy the following preference name to the clipboard:
general.useragent.override.elance''.''com
(2) In a new tab or window, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(3) In the filter box, type '''override''' and pause while the list is filtered
(4) Make sure '''general.useragent.site_specific_overrides''' is set to its default value of true (or right-click and choose Reset if it is not).
(5) Right-click anywhere in the preference list area and choose
New > String
then paste the preference name you copied. Click OK and enter TEMP or asdf or any text as a temporary placeholder. You should see the preference added in bold. Leave about:config open and switch back to this tab.
(6) Select and copy the following useragent string to the clipboard ''(it's all one line)'':
Mozilla/5.0 (Windows NT 6.1; rv:19.0) Gecko/20100101 Firefox/19.0
(That's Firefox 19 on Windows 7 32-bit)
(7) In about:config, double-click '''general.useragent.override.elance''.''com''' and paste to replace the temporary text with the new useragent string. Click OK, you're done here.
Now try reloading a page where you need to upload (use Ctrl+Shift+r) and test that function again. Any change?

Not receiving email from one domain

Hi,
I am running Exchange 2003 on Windows Server 2003 SP2 and suddenly starting having the problem of not receiving mail from one domain. All other domains seem to be fine, although seem slower to receive mail than normal. The sender of the domain in question does not receive any NDR or bounce back error messages, so they are none the wiser the mail has come through. I have checked the junk/spam, I don't have any filters which could be blocking the domain.
Any ideas??
Thanks

Hi,
Please enable the protocol log on SMTP virtual server to check whether the remote domain has attempted to connect to your exchange server to send email to you.
If the remote domain has attempted to connect to your exchange server, please check whether the message is received by the SMTP server. If the message has been received, please use the message tracking log or queue viewer to check whether the message stuck on the server.
If the message is rejected, you can use protocol log to gather further information.
If the remote domain does not attempt to connect to your exchange server, I think you need to work with the remote domain admin regarding the issue as other domains are able to send email to you with no problem.
Mike

How to set the cookie or session of one domain to another domain

Hi,
I am using tomcat server. I am facing a issue of session lost when I am moving from one domain to another domain.
e.g. http://mydomain.com/ to http://a.mydomain.com.
Is there any way to set the cookie or same session to sub domain in tomcat.
Please help me. I will be highly obliged.

a tutorial from JavaWorld
http://www.javaworld.com/javaworld/jw-01-2001/jw-0126-servlets.html?page=1

Extending Oracle BI SE One domain to support Oracle OSB

Similar Messages

Maybe you are looking for