Extending range of cellular service

I would like to use the I pad on my sailboat- In the past I have extended the range of my cell phone using a cell phone booster- It connected the phone, thru a cable that actually plugged into an antenna port on the phone and ran to the booster- now phones don't have this option (at least that I can find) I suppose it is old technology. However, does the i pad have such and option available to it-? In other words an antenna out- ?

However, does the i pad have such and option available to it-? In other words an antenna out- ?
No.
You could get something like these -> http://www.wilsonelectronics.com/ProductListing.aspx?Category=6&title=Wireless

Similar Messages

HT201415 I want to purchase a month of cellular service for my IPAD2. When I use my ITunes password, it states that I have the wrong password but does not offer a way to reset my password. Please advise.

I want to purchase a month of cellular service for my IPAD2. When I use my ITunes password, it states that I have the wrong password but does not offer a way to reset my password. Please advise.

Read through this link and maybe you'll see something that will help you:
http://www.tech-recipes.com/rx/5827/ipad-3g-activating-purchasing-att-cellular-d ata-for-the-ipad-3gwifi/

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

IPad 2 lost cellular service after upgrade to iOS 8.1

Device: iPad 2 Model A1397 16GB
My cellular service worked fine prior to the upgrade to iOS 8.1. After completing the upgrade, my cellular connection always says "Searching..." and never finds service. I have tried restoring iOS 8.1 through iTunes, but end up with the same results. I'm new to upgrading apple devices, so I didn't create a backup of my OS prior to upgrading. With Apple not signing iOS 7.1.2 anymore for my device, I'm in a bit of a pickle and cannot revert back. Any suggestions?

Make sure ringer is on and volume is up.

I have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. unility says it has found a new base station

i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.

Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).

I just signed up for cellular service for my iPad but it will not connect

I just signed up for cellular service for my iPad but it will not connect. Verizon told me to turn off wifi, switch the unit off and back on. It's just 'searching'. What do I do?

Try Settings > General > Reset > Reset network settings

HT201394 Loss of cellular service after updating to iOS 8.0.2 on iPhone 5s

Loss of cellular service after updating to iOS 8.0.2 on iPhone 5s

Hello there, Lonlybird2009.
The following Knowledge Base article offers up some practical steps for troubleshooting cellular connection issues on your iOS device:
iPhone cellular data connection issues
http://support.apple.com/kb/ts3780
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

CAN I RECEIVE MESSAGE FROM MY CELLULAR SERVICE PROVIDER IN MY iPAD MINI CELLULAR ?

Hi Using iPad,
Can I receive message from my cellular service provider in my iPad mini cellular?

I Picked This Username wrote:
Be aware though..
If you send an iMessage to an iPhone that isn't using WiFi, they will be charged for receiving the message..
The same goes with the iPad sending the message: if you are not using WiFi..
That is incorrect. No cell carrier charges for a message sent by and received by iMessage other than any relevant data charges. The carrier doesn't even know the message is any different from an email message or any other standard Internet traffic. Only if the iPhone was not set up to iMessage and hence receives the message via SMS would there perhaps be a charge, and that will depend on the cell plan. The iPad cannot receive messages via SMS at all so there will never be a charge.
Regards.

How to calculate query value on extended range of data

Hi,
This is my first post, so let me greet all forum users. I'm reading the forum for few weeks and I'm really impressed with the force of this community.
My question is based on some real problems but I'll ask in general:
In a BEx query - is it possible (and how?) in a result cell to obtain value that is calculated based on some more extended range of infoprovider records than it results from all the characteristics related to that cell?
The question is somehow about a reverse case to the restriction in Selection. I'm asking about a kind of 'extension' of selection.
Example for the question follows (it is somehow simple, I put it here just to picture the problem, note: the question is more general!)
cube: ch: 0CALMONTH, 0MATERIAL, 0PLANT
      kf: 0QUANTITY (ex. of outgoing deliveries)
What I need is to obtain in any query the SUM(0QUANTITY) over all 0PLANT (this can lead to knowing the 'activity' of the specific plant by calculating the share. that activity can be calculated at diferent level of detail).
The 'dream' query would look like:
rows: 0CALMONTH, 0MATERIAL, 0PLANT
cols: 0QUANTITY SUM_OVER_0PLANT
resulting in ex:
0CALMONTH 0MATERIAL 0PLANT 0QUANTITY SUM_OVER_0PLANT PLANT_ACTIVITY
2005.01    00001      P100    10         30               1/3
2005.01    00001      P200    20         30               2/3
2005.01    00002      P100    30         70               3/7
2005.01    00002      P200    40         70               4/7
2005.02    00001      P100    50         110              5/11
2005.02    00001      P200    60         110              6/11
2005.02    00002      P100    70         150              7/15
2005.02    00002      P200    80         150              8/15
after removing drill 0MATERIAL:
0CALMONTH 0PLANT 0QUANTITY SUM_OVER_0PLANT PLANT_ACTIVITY
2005.01    P100    40         100              4/10
2005.01    P200    60         100              6/10
2005.02    P100    120        260              12/26
2005.02    P200    140        260              14/26
after removing drill 0CALMONTH:
0PLANT 0QUANTITY SUM_OVER_0PLANT PLANT_ACTIVITY
P100    160        360              16/36
P200    200        360              20/36
For this specific case I investigated several solutions:
1) using formula & function SUMCT (Result). This has a drawback that Result for 0PLANT must be present in right place (bottom level) in the resulting query. I don't like this.
2) SUM can be directly precalculated in the cube. Well, I'd prefer Bex only...
Please keep in mind also following:
1) there may be a need to refer to the data that is outside prompt/filtering/restricting range.
2) I want to preserve all the OLAP freedom, so all the solution should be a query with some tricky formula/kf/??? to be used by user in any situation and producing right result.
I hope I'm not demanding to much...
(now after this long example please have a look at the question again!)
Regards,
Mirek

Hi Ashwin,
while using SUMCT I loose the freedom of OLAP. SUMCT calculates properly SUM_OVER_0PLANT only when the 0PLANT is the lowest drillin level. If this is not the case (ie. some other ch is the lowest level or 0PLANT results are suppressed) the approach won't provide right result.
sure I will reward all helpfull posts.
regards,
Mirek

Planning to buy iPad Mini with Cellular in US with TMobile Carrier. Is this unlocked? can i use my iPad in India with there cellular service??

Planning to buy iPad Mini with Cellular in US with TMobile Carrier. Is this unlocked? can i use my iPad in India with there cellular service??

That will depend on how you buy the iPad.
If you buy it from an Apple Store directly at full price it will be unlocked, and can take a sim card from any compatible GSM carrier.
If you buy it directly from T-Mobile under a subsidy(at a discount price tied to a service contract) Then it may be locked to T-Mobile for at least 40 days of service with them.

Can I add cellular service on an iPad that only has wifi?

i want to add cellular service to an iPad I originally bought with just wifi. Is that possible?

You can't add it to the 'guts' of the iPad. It's a sealed system.
What you can do is go for a device like a Mifi. It's a battery operated portable wifi hotspot that you can then connect your ipad to.
I believe that every major provider has their version of the device so look for hte provider that offers you the best options and go from there.

I don't get any cellular service where I live. Can I make and receive calls through my wifi?

I don't get any cellular service where I live. Can I make and receive calls through my wifi?

You can use a service like Skype. Download the (free) Skype app from the App Store and see if that meets your needs.
I have no financial or any other interest in Skype. I am a Skype customer on my Mac.

Insert ATT sim card in Iphone 5 = automatically connects to cellular service?

Hi folks,
I just bought an unlocked Iphone 5 a few weeks ago. I'm using it perfectly except I don't have a nano sim inserted. I have AT&T. I had a Samsung before buying the Iphone 5 and I blocked the internet access through cellular service on the Samsung. I was wondering if I buy a nano sim (using my old number) and insert it in my Iphone 5, would it automatically register me to a data plan? Would it automatically connects to the internet through cellular service even though I've never signed up for it? Yes I only want to use the Wifi on my Iphone. I do not want to pay extra money for the data plan. Keep in mind that my Iphone is unlocked already. I heard my friends saying that if you use an ATT sim on an Iphone, it will force you to use internet through the cellular service. Is that true?
Thank you for reading my question.

That is true, AT&T does not allow the use of smartphones without a data plan on their network. Unlocking has nothing to do with this and I'm wondering why someone would pay that much money for a phone they are not going to use.

Cannot create extended range vlan

hello guys,
Could you help me to fix this issue;
Problem Description
I get this message when I tried to create an extended range vlan.
Switch: 2960
IOS:
12.2.53
spanning-tree extend system-id is configured
VTP mode transparent is configured as well.
These are configured, and work find
2801 TEST2 active
2807 TEST3          active
2857 TEST4         active
3326 test5       active
VTP Status:
#sh vtp status
VTP Version capable             : 1 to 3
VTP version running             : 1
VTP Domain Name                 :
VTP Pruning Mode                : Disabled
VTP Traps Generation            : Disabled
Device ID                       : 68bd.ab2f.b100
Configuration last modified by 10.231.71.241 at 0-0-00 00:00:00
Feature VLAN:
VTP Operating Mode                : Transparent
Maximum VLANs supported locally   : 255
Number of existing VLANs          : 29
Configuration Revision            : 0
MD5 digest                        : 0xE5 0xED 0xE2 0xB2 0x96 0x21 0x2A 0x24
                                     0xBC 0xAD 0xF5 0x27 0x95 0xF6 0x93 0x0A
ERROS:
SW1(config)#vlan 2856
SW1(config-vlan)#name test1
SW1(config-vlan)#exit
% Failed to create VLANs 2856
VLAN(s) not available in Port Manager.
%Failed to commit extended VLAN(s) changes.
SW1(config)#
thank you for helping me.
Alioune

You need to enable VTP V3 on all the switches. If one of your switch is VTPV1 capable only, it will not able to inter-operate with VTP V3.
Please look at these guidelines for 2960.
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_55_se/configuration/guide/swvtp.html#wp1316856
Cheers,
-amit singh

Help Extending Range for Itunes music

My goal is to get my itunes music from my computer out to my backyard which is over 125 feet away though a few walls. This is what I have: Verizon FiOS, a Time Capsule, newer Airport Express with 802n an an older Airport Express. I've been trying to connect them all to extend range but can't seem to get it to work. First, is it possible with what I have and Second can anyone give me step by step. The last thing I tried to do was use the "extend network" in airport utility. All three have green lights and they show up in the itunes windows but no sound is coming out. Any help would be appreciated.

Hello sierra111. Welcome to the Apple Discussions!
My goal is to get my itunes music from my computer out to my backyard which is over 125 feet away though a few walls.
To cover that distance, you would have to configure your base stations for a Wireless Distribution System (WDS), using the Time Capsule (TC) as the main, one AirPort Express Base Station (AX) as the relay, and the other AX as the remote base station in this WDS.
I've been trying to connect them all to extend range but can't seem to get it to work
Unfortunately, you won't be able to take advantage of the "extend" feature as this is only available for the 802.11n AirPorts. Since you will adding an 802.11b/g model, you are limited to a WDS ... which only operates in the non-"n" radio mode.
Here are the basic steps to set up the WDS:
(Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. Also, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
Main Base Station Setup - TC
o Click the AirPort status menu in the menu bar and choose the wireless network created by the TC.
o Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the TC, and choose Manual Setup from the Base Station menu.
o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the relay base station (AX#1).
o Click Update to send the new settings to the base stations in the WDS.
Relay Base Station Setup - AX#1
o Click the AirPort status menu in the menu bar to join the wireless network created by AX#1.
o Open AirPort Utility.
o Select AX#1, and choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the TC from the Channel pop-up menu.
o Click WDS and choose “WDS relay” from the WDS Mode pop-up menu.
o Enter the AirPort ID of the TC in the Main AirPort ID field.
o Click the Add "+" button and enter the AirPort ID of the remote base station (AX#2) this relay base station will connect to.
o Click Update to transfer the new WDS settings to the relay and remote base stations.
Remote Base Station Setup - AX#2
o Click the AirPort status menu in the menu bar and choose the wireless network created by AX#2.
o Open AirPort Utility.
o Select the remote base station, and choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and again, choose the same channel as the TC.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of AX#1 in the WDS Main field.
o Click Update to transfer the settings to the base station.
(ref: Pages 42-46 of "Designing AirPort Networks.)

Extending range of cellular service

Similar Messages

Maybe you are looking for