Extending recording time/length for each track?

Hello Any and Everyone!
I would like to know if someone can help me out with what I am to do about extending the recording time for each track? I have found nothing as of yet that explains to me how to do it in the manual or in the application itself. It is standard 15 minutes and that's it. It may be and probably is a simple thing but can someone help me? Thanks.
Wazzmatic

Hi,
If I'm not mistaken, you should check the preferences.
Click 'Audio' or 'Recording'. There you should find a field where you can setup the desired recording time for all your projects....
As far as I know, you cannot setup independent rec. time for each chammel/track.
Hamm.Nrd

Similar Messages

  • Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes?

    Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes? The Ipod Touch, by itself does not allow cross-fading, therefore when the stop time is edited short, the song jusst truncates then goes to the next song. I tried the DJay ap and while it would crossfade, it would NOT read the song settings for the stop marker. So now I want to try and Ipad and see if there is an app that will READ the Itune stop settings within the song. I do NOT want an app that will allow me to DO the stop marker. I want an app that will READ the stop marker from the song as it is set in Itunes.

    Itunes provides the option for setting the Start and Stop times of each music track.  However, the start and stop times do not synchronize to the iPhone.  I don't understand why this option is even available as it doesn't work when listening to music on the phone.  I have not found another application that will support the start and stop time markets.  I have searched quite a bit for this but can't find anything.  I hope we can find something. 

  • I'm mixing tracks together and can't work out where the volume and BPM control for each Track is located

    Which Table would be the best for mixing tracks together? I've been off the game for a bit and have forgotten, but last time i made a good mix tape from the New project table....
    Where do i go to match up the BPM for each track i lay to match up?
    How do i get the Volume line to pop up on each track so i can fade accordingly?
    Thank you to those who can help out

    The correct way to target instances m1 thru m10 using bracket notation would be... 
    this["m"+i]
    or even more correctly...
    this["m"+String(i)]

  • In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

    In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

    scottiewade wrote:
    Thanks. I know how to select multiple tracks in the mixer, did that and put on group clutch,
    Hi
    Wrong..
    To assign tracks to a group, click in the dark gray box just above the automation (Read/Write/Off etc) on a channel strip, and select the group number you wish to use. The first tim eyou assign a group, the Group Setting swindow will appear automatically, thereafter you need to click on the group area and choose 'Open Group Settings'.
    Make sure that you have turned off Group Clutch (this disables all Groups)
    Maybe this will help
    http://support.apple.com/kb/VI248
    CCT

  • How to extend the time line for the premiere on mac pro mavericks

    how to extend the time line for the premiere on mac pro mavericks

    Wrong place.
    Try the Adobe Premiere forum.
    http://forums.adobe.com/community/premiere
    Good luck,
    x

  • Why are albums that have various artists appearing as separate albums for each track?

    why are albums that have various artists appearing as separate albums for each track?

    Check the tags via the info panel on each system.
    You may see that one version has settings for 'Disk x of y' disks.
    There are other fields that should be compared too, like 'grouping'. You also need to be certain the playlist (or the Library) are sorted by the same criteria e.g. by 'album' is different to 'album by artist' etc. That can cause unexpected differences in the way it displays.
    I suspect match has given you iTunes copies of the files with Apple's own metadata whilst your originals are from CD with your custom tags.

  • How to get the time interveral for each status of worklow (wating,Inprocess

    Hi Friends,
    I have requreiemnt to get the time interval for each status of workflow.
    ex.
                                                                     status
    workflow id  | startd date | enddate       | waiting | Inprocessing|Error|......
    1026            10.10.2008  25.10.2008        1hr      1hr 30 min    2 hr
    Please do give me idea how to get the time stam of each status of workflow.
    Thanks,
    D.prabhu

    Hi,
    I think the following tables would be helpful to you:-
    SWW_CONT     Container Contents for Work Item Data Container
    SWW_CONTOB     "Container Cont. for Work Item Data Container (Only Objects)"     
    SWWLOGHIST     History of a work item     
    SWWORGTASK     Assignment of WIs to Org.Units and Tasks     
    SWWUSERWI      Current Work Items Assigned to a User     
    SWWWIHEAD     Header Table for all Work Item Types
    Hope it Helps!
    Regards,
    Kanika

  • HT201407 I backed up my phone before it was replaced.  My apps have disappeared altogether, and my music is there but it indicates that I need to download (not pay for) each track again.  What have I missed?

    I backed up my phone before it was replaced.  My apps have disappeared altogether, and my music is there but it indicates that I need to download (not pay for) each track again. It's only small stuff, but my ringtones and photos and background etc have all gone, too.  What have I missed?

    How to BackUp  >  http://support.apple.com/kb/ht1766
    What gets Backed Up
    iTunes http://support.apple.com/kb/ht4946
    iCloud http://support.apple.com/kb/PH2584
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Loop length for multiple tracks

    Is there a way to set the length of loop repitition, for different tracks?
    I tried this the other day, with two tracks that I set up to loop, and when I adjusted the loop length in the top of the arrange window, both tracks were affected.
    I want to have one track loop 5 measures, and the second track only 3 but am not sure how to do that.
    Is there a way to do this?
    Thanks
    RH3906

    This is how I do it. Select the track, click on the midi/audio file you have dragged to the track. Then click the 'loop' check box (top left). This will loop the sample all the way to the 'end'. Now simply hover your pointer over where each loop sample is joined and the pointer should change to a different icon - kind of an arrow in a half loop. Now if you click on the sample when you have this pointer you can now drag back and forth where you want the loop to end. Do this for the other track, you can choose how many bars you want it to loop.
    What you cant do is set up a loop all the way to the end and make 'holes', that is parts where the loop doesn't happen.
    If you want a loop to start again in a different place, simply drag the sample to the new starting location and repeat above.
    Hope this helps.

  • Set default time/length for imported images to remain on slide

    I am working on several ongoing projects where i need to import around 30 images (mobile screen captures) to each captivate project to create a simulation. I have set the default slide length to 1 second, but each time an image is imported, the image comes in at a default of 3 seconds and I need to go back and adjust both the length of the image and the slide length on the timeline. It's time consuming and since i have to do it repeatedly, I wondered if there is a way to set a default length for an imported image?
    Thanks for any help!
    Michelle

    You can set the default length of a lot of objects: Preferences, Defaults,
    Lilybiri

  • Time stamp for each DML in spool file

    Hi,
    I need to know how much time is taking for each delete statement in sql file.
    this is my sql file with dml statements.
    set serveroutput on;
    set time on;
    spool C:\PN\PN\temp_spool.log
    delete from tmp_test1;
    commit;
    delete from tmp_test21;
    commit;
    set time off;
    spool off;
    The spool file is creating as below.
    20 rows deleted.
    Commit complete.
    30 rows deleted.
    Commit complete.
    My requirement is to print time for each DML in the spool file. eg
    *17:31:03 SQL>*
    *20 rows deleted.*
    Commit complete.
    *17:31:33 SQL>*
    *30 rows deleted.*
    Commit complete.
    *17:31:53 SQL>*
    If I spool the file with time stamp I can get the timing for each DML.
    Appreciate your help.
    Thanks,

    I need to know how much time is taking for each delete statement in sql file.
    If I spool the file with time stamp I can get the timing for each DML. subtract the consecutive timestamps in the spool file.

  • GarageBand - How to set different BPM for each track?

    Hi, for the last couple of years, I've been using Sony Acid on my PC to mix multiple tracks to make blends and remixes of songs. I've just switched of the a MacBook, and am trying to get Garage Band to do the same. I'm curious whether or not I can set the BPM of each track individually so they will all play at the same BPM when mixed. I'm only able to find the master BPM that changes the entire BPM. Any help would be great. Thanks in advance.

    Well, as far as I can see you don't really want different BPMs on each track, but you want all tracks to have the same tempo - only you want to make the tracks fit that tempo.
    You could do that in GB by first bringing each of the tracks to the desired tempo, then export it and re-import it. (There's some other ways to do it, but they all involve some fiddling around and maybe some math.*)
    Logic offers a nice feature where you can shorten and lengthen a region just by dragging it out. That could be used for the purpose you're trying to achieve.
    *For example: Determine the BPM of each of the tracks. Set the project's tempo to the BPM of track A. Import track A, turn it purple so it follows the tempo. Then set the project to project B's tempo, import it, etc. You will end up with all tracks in the same tempo, and you can still make the whole project go faster or slower.

  • Record time duration for fax in vxml

    I am going to get the time duration used for fax sending in vxml:
    <transfer name="mycall" destexpr="'fax://' + phone_num" bridge="false" connecttimeout="120s" maxtime="180s" cisco-longpound="true" cisco-mailtoaddress="'xxxx'" >
    <catch event="telephone.disconnect.transfer">
    <assign name="mydur" expr="mycall$.duration"/>
    <goto next="#timeCount"/>
    </catch>
    </transfer>
    <var name="startTime" expr="new Date();"/>
    <var name="endTime"/>
    <form id="timeCount">
    <block>
    <assign name="document.startTime" expr="startTime.getTime();"/>
    <assign name="document.startTime" expr="Number(startTime);"/>
    <assign name="document.endTime" expr="new Date();"/>
    <assign name="document.endTime" expr="endTime.getTime();"/>
    <assign name="document.endTime" expr="Number(endTime);"/>
    <assign name="mydur" expr="document.endTime - document.startTime;"/>
    </block>
    </form>
    But mycall$.duration is 0 after transferring fax.
    And even if I use codes to count time duration, the duration, mydur, is about the same regardless of the number of pages sent.
    Is it possible to use vxml to record time duration of fax?
    Thank you!

    Paste the following Config:
    sh ver
    sh run
    debug of one call demonstrating the problem :
    debug voip ivr all
    debug vxml all

  • Create Store Procedure to Count Number of records in Database for each table

    Hello,
    I have created the code which counts the number of records for each table in database. However, I want create store procedure for this code this code that when ever use execute the Store Procedure can provide the database name to execute it and as a result
    table will display number of records in each table.
    Below you will find the code its working:
    CREATE
    TABLE #TEMPCOUNT
    (TABLENAME
    NVARCHAR(128),
    RECORD_COUNT BIGINT)
    -- Creating a TEMP table
    EXEC
    sp_msforeachtable
    'insert #tempcount select ''?'', count(*) from ? with (nolock)'
    SELECT
    * FROM
    #TEMPCOUNT
    ORDER
    BY TABLENAME
    DROP
    TABLE #TEMPCOUNT
    This code need to be convert in store procedure and user can give database name when execute the procedure in order to count the records.
    Looking forward for your support.
    Thanks.
    SharePoint_Consultant_EMEA

    Something like:
    set quoted_identifier off
    go
    create procedure usp_TableCounts
    @DBName as varchar(1000)
    as
    set nocount on
    declare @SQLToExecute varchar(1000)
    CREATE TABLE #TEMPCOUNT (TABLENAME NVARCHAR(128), RECORD_COUNT BIGINT) -- Creating a TEMP table
    set @SQLToExecute = @DBName + ".dbo.sp_msforeachtable 'insert into #tempcount select ''?'', count(*) from ? with (nolock)'"
    print @SQLToExecute
    exec (@SQLToExecute)
    SELECT * FROM #TEMPCOUNT
    ORDER BY TABLENAME
    DROP TABLE #TEMPCOUNT
    GO
    Satish Kartan www.sqlfood.com

  • Is it possible to make an album, with seperate, and different artwork for each track? Thanks.

    Got a few tracks and I was wondering if its possible to make like an album, but each track different art?  

    You can give each track its own artwork. iTunes will normally display the artwork of track 1 in album listings. The individual track art will show in the small window at the top of the screen when playing, or the artwork panel of the mini player, or the now playing window on a device. Try it and see.
    tt2

Maybe you are looking for