Extending the Attributes on the Header DFF

We are used the available 20 attributes on the order header dff, please let me know is there any way that we can extend it further.
Thanks,
Srini C

Voicemail is a network controlled feature, not a phone feature.
You may be able to adjust it by using the call divert option in the settings menu (see your user guide). If you cannot find that option call your network and they will set it for you.
On most networks the maximum amount of time you can have before the phone diverts to voicemail is 30 seconds. Disabling voicemail may extend it further, again contact your network if you cannot find the setting in the phone.

Similar Messages

CRM function module to update the attribute in the classification TAB of BP

Hi All,
Can any body let me know if there is any functionmodule to update the CRM function module to update the attribute in the classification TAB of BP tcode.
I have searched a lot i get FM to update the marketing attribute and not the attributes in the classification tab.
Thanks in Advance
Edited by: Sharath Kumar on Dec 2, 2010 4:48 PM

For material bom: CSAP_MAT_BOM_CREATE
and CSAP_ORD_BOM_CREATE for Order BOM.
Regards,
Ravi

The attributes of the user are inconsistent or not defined. See PPOMA_BBP

Hi all,
I created a free text SC and after approval by the manager, the SC was routed to the Sourcing cockpit as I had activated sourcing for the product category that was ordered.
Now in the SOCO, when I select my SC and click on the 'Next' button, I get an error : "The attributes of the user are inconsistent or not defined. See transaction PPOMA_BBP."
I have defined the following attributes for my purchaser
Acct assgnmnt Categry --- (Cost centre)
Acct system for vendor --- (ECC logical system)
Company code --- (XXX)
Cost centre --- (XXXXX)
Del address --- (XXXXX)
Doc type in R/3 --- (ECPO)
Local currency --- (EUR)
Mov type --- (201)
System Alias --- (ECC logical system)
System alias for accounting system --- (ECC logical system)
System alias for vendor --- (ECC logical system)
User role --- (employee/op purchaser/st purchaser)
Which other attribute do I need to define? Is there something that I have missed?
Strangely it works fine if I give my user SAP_ALL profile!!
Regards

Hitesh & Velu,
I did regenerate the role and it is in green now. Still it does not work.
However I noticed that when I ran the attribute check for Purchaser's position, I got the following errors.
Application 'RFx': Assign purchaser PURCHASER1 to a purchasing organization
Message no. BBP_ATTR_CHECK151
Diagnosis
User PURCHASER1 has a purchaser's authorizations but is not assigned to any purchasing organization.
System Response
Purchaser PURCHASER1 (position S 50000015) cannot run the EBP applications RFx without encountering errors.
Procedure
Assign a purchasing organization to purchaser PURCHASER1 (position S 50000015). Select an organization unit above the purchaser and select the property 'purchasing organization' on the 'Function' tab.
I have already done the above, all org units have a function that links them to backend ECC. Why is it still prompting me with the same error?
Regards

How to bind the attribute in the context to a dynamic created element?

Hi, experts,
There are some attributes in the node context(ee_node) that contained the attribute named "ANSSA" in the view(test_view) in the WDA for abap. In the method modifyview of the view(there is a transfered parameter that represent the name of "ANSSA")
I want to create a dynamic element(inputfield) in the test_view. The element need bind the context attribute (ANSSA).Through the transfered parameter(para), I only know the name of the attribute binded.
How can I bind the attribute of the context in the following code?
METHOD modifyview .
*importing para type string.
*importing m_view type ref to if_wd_view.
data wd_inputfield type ref to cl_wd_input_field.
create one element automatically in the view.
wd_inputfield = CL_WD_INPUT_FIELD=>NEW_INPUT_FIELD(
                                    view = m_view
                                    id = para
                                    BIND_VALUE = ???
ENDMETHOD.
I don't know how to replace the "???" in the method modifyview? Do you give me some hint for it?
You can reply back to me via e-mail if you think we should discuss this internally at [email protected] or [email protected]
Thanks.
Best regards,
tao

Hi, Suresh,
Thanks a lot for your help.
The last mail have some errors. Now, I modify my code error. The following is my new code in the wddomodifyview method in the ADDR_AUTO_DISP_VIEW view.
Now, I modify my code. The following is my new code in the wddomodifyview method in the ADDR_AUTO_DISP_VIEW view.
METHOD wddomodifyview .
importing view   type ref to if_wd_view.
DATA      transparent_container           TYPE REF TO cl_wd_transparent_container.
DATA      inputfield                      type ref to cl_wd_input_field.
transparent_container ?= view->get_element( `TRANSPARENT_CONTAINER` ).
transparent_container->set_visible(
    EXPORTING
      value = if_wdl_core=>visibility_visible ).
wd_this->SET_DYNAMIC_INPUT(
   EXPORTING
     inputfield_ID = 'ANSSA'
   IMPORTING
     INPUTFIELD    = inputfield
**************The web page will occur error when running the WDA as soon as I write the code.***********
transparent_container->add_child( THE_CHILD = inputfield ).
ENDMETHOD.
The following is the code of the SET_DYNAMIC_INPUT method.
method SET_DYNAMIC_INPUT .
*importing
*INPUTFIELD_ID    type STRING
*exporting
*INPUTFIELD    type ref to CL_WD_INPUT_FIELD
Data binded_context       type string.
concatenate 'ADDR_AUTO_DISP_VIEW.EE_ADDRESS.' INPUTFIELD_ID into binded_context .
inputfield = CL_WD_INPUT_FIELD=>NEW_INPUT_FIELD(
id = inputfield_id
read_only = abap_true
BIND_VALUE = binded_context
endmethod.
When I run the WDA, The web page occuring the error information:
Note
The following error text was processed in the system DEV : Access via 'NULL' object reference not possible.
The error occurred on the application server devserver_DEV_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
But when I delete the code of the wddomodifyview, and create a inputfield in the layout of the view, and bind the "ANSSA" to the "value" property in the layout, the WDA is running correctly.
Do you give me some hints?
Thanks a million.
Best regards,
tao

If I use a LDB in the Attributes of the Program what happens?

Hi friends,
I have to modify a standard program RFRECPSFA410. which i need to add some more fields in the output layout. It is a standard program. In the attributes of the program he used the LDB name RECN. And while debugging i found that the program is calling logical database. How it is calling I could not understand. And I need to add the fields in the Output Lay out. How can I add?

Hi
LDB - Logical Database are special ABAP programs that retrieve data and make it available to application programs. The most common use of logical databases is still to read data from database tables by linking them to executable ABAP programs. They provide selction-screen, authority-check etc.
For detailed information see the following links:
Overview:
http://help.sap.com/saphelp_nw04/helpdata/en/60/183d78163011d2953c0000e8353423/frameset.htm
Using Logical Databases:
http://help.sap.com/saphelp_nw04/helpdata/en/60/183d78163011d2953c0000e8353423/frameset.htm
Regards
Surya.

How to get the Attributes of the UNIX file Directories ?

Hi Guru,
How to find of the Attributes of the UNIX file Directories in sap TC :- u2018 *ZZWT*u2019 .
The file attribute details need to show in the report.
I try on FM : EPS_GET_FILE_ATTRIBUTES
/SDF/GET_FILE_INFO
But not getting the attributes details.
If any idea plz. Help me.
Regards,
Subash

Which basis release do you use?
From 7.0 you have [GET DATASET|http://help.sap.com/abapdocu_70/en/ABAPGET_DATASET.htm] statement
Before, you may only get what you see in AL11 : mimic what is in program RSWATCH0
Or you may register and use [UNIX commands (SM69 transaction / SXPG|http://help.sap.com/saphelp_nw70/helpdata/en/fa/0971e1543b11d1898e0000e8322d00/frameset.htm]) and get the results
Edited by: Sandra Rossi on Aug 2, 2009 12:39 AM

Can we change the attribute once the cube is live

Hi:
i was wondering whether can we change the attributes once the cube is live?
kedar

If the Cube is LIVE with data ,we can turn ONN the NAV attribute for the cube as per the post above.
1)Do i need to delete and reload data in the cube for the navigational attribute changed inthe cube??history data
2)Will my deltas be affected which are live and running??
3)will update rules deactivated be a problem when we transport to production??
4)If we make changes to existing data model like adding infoobjects and want to have history data modified to that object ,than Can FULL REPAIR load work ??
or making a copy of the cube ,generating export DS..loading ..the olad traditional way is the option

Can not see the attributes of the dimension added in an existing structure

I have to add a formula on the attributes of a dimension that i included in anexisting structure. But when i try to create the formula it does not show the attributes or that dimension. Early help would be appreciated.
Thanks in Advance
Murali

Hi Manish
Yes this is a display attr. if i change it to Nav attri. will this not effect business as this is being used.
Thanks
Murali

How to read the attribute of the xml file using jaxb

Thanks,
Buddy as i have a issue i have to read the xml file using jaxb and xml file contains this data and i have read the attribute like name , desc and action for a particular menu name pls tell the code how to do this it will be a great favour to me
thanx in advance
Rasool
<contextmenu>
<menu name='Lead' >
<menuitem name='newlead' desc='New Lead' action='/leads.do?dispatch=insert' />
<menuitem name='editlead' desc='Edit Lead' action='' />
<menuitem name='leadinfo' desc='Lead Information' action='' />
</menu>
<menu name='Cases' >
<menuitem name='' desc='' action='' />
<menuitem name='' desc='' action='' />
<menuitem name='' desc='' action='' />
</menu>
<menu name='Contact' >
<menuitem name='' desc='' action='' />
<menuitem name='' desc='' action='' />
<menuitem name='' desc='' action='' />
</menu>
</contextmenu>

What my program do is to get the encoding of XML files and convert them to UTF-8 encoding files, while I need this "encoding" information of the original XML document thus I can convert...
After reading specifications and JDOM docs, the truth turns to be disappointed, no function is provided to get this information in JDOM level 2(the current released one), while it's promissed that this function will be provided in JDOM level API....
Thanx all for your help and attention!!!

How to populate the attribute of the characteristics in Contract?

Hi Experts,
I need to populate the attribute "Truck Net Value" of the characteristics during the Contract creation with reference to Sales Order. Brief description of the scenerio:
We are using a variant material in the Sales Order. This material has different attributes which the end user need to populate during the SO creation. Now I have to create a Contract with reference to Sales Order. While creating the Contract with reference to Sales Order I want to populate the attribute "Truch Net Value" of the Sales Order with some value and update the Sales Order. So to update the attibute of the Sales Order during Contract Creation. Is there any function module that I can use for this purpose? I know where to write the code in the standard program? But I don't know how to populate the attibute?
Thanks
MAN

Hi,
Welcome to SCN!!!
After the contract is created, you can call the BAPI BAPI_SALESORDER_CHANGE along with COMMIT to change the order texts. Alternatively you can use FMs SAVE_TEXT and COMMIT_TEXT to change any kind of texts.
You can check the parameters to be passed by placing the breakpoints in these FMs, change and save the text manually from VA02 in the sales order.
Thanks,
Vinod.

Not able to change the name of the attribute of the Table operator.

We are trying to create OMB scripts to automate certain tasks. As a part of this, there is a requirement to change the attribute name of table operators (which by default gets the name of the column). It is possible to change the attribute name from the GUI. But I was not able to do the same using OMB Scripting. Here is the script I used.
OMBALTER MAPPING 'TEST' \
MODIFY ATTRIBUTE 'GEOGRAPHY_ID' OF GROUP 'INOUTGRP1' OF OPERATOR 'TEST' \
SET PROPERTIES(BUSINESS_NAME,PRECISION,DESCRIPTION) \
VALUES('MEMBER_ID',2,'MEMBER')
This script was to change the name of the attribute - GEOGRAPHY_ID of the table operator TEST.
From what I can make out from the Scripting reference, changing BUSINESS_NAME of the attribute should do the trick but it is not happening. The syntax looks correct as the precision of the column changes.
Am I missing something? Or is it a limitation or a bug?
I use OWB client 10.2.0.1.25 and OWB repository 10.2.0.1.0.

Hi!
I'm using successfully
OMBALTER MAPPING '$mapName' MODIFY ATTRIBUTE '$attrName' OF GROUP '$groupName' OF OPERATOR '$joinName' RENAME TO '$newName'
Regards,
Carsten.

How to get the attribute of the xml tag

I have the following xml file
Example.xml
<?xml version="1.0" encoding="iso-8859-1"?>
<html><set label="09/07/29" value="1241.90"/>
</html>
Can any one help me in parsing this xml file
I want to retrive the attribute values of the tag set
Example I want to store 09/07/29 to variable1 and 1241.90 to variable2 in order to insert this data into a database table.
Appreciate if any one can help me..very urgent

Dup post.
Answers provided at {message:id=3658564} and {message:id=3658522}

Maintain the attributes for the master data-InfoSource

Hi All,
I got the error in the Schedule Process chain were one of my Delta Load-Master Data is not taking data from the source system.For rectifing the error is tried to check the Master data attribute (InfoPackage) in InfoSource. But I am getting the error message as "Attributes are not yet maintained" RSM006. Please provide the solution to the problem. As I want to run the scheduled Process Chain.
Regards,
Rajesh Giribuwa.

Hi,
Welcome to SDN!
In the error message do you see a question mark (or help/explanation button)? Clcick on it and see the system explanation and proposed remedy.
Best regards,
Eugene

How does the attribute gets the data from R/3 field?

Hi Experts,
It could be silly Q. IO has attributes x, y, z....... When we map r/3 field to IO, and it is added to the cube and when we create a report, how does the attribute gets data? I've been working in BW and suddenly I got confused. Someone please provide me some info
Thanks,
Radha

X,Y,Z being attributes of an info object A.
When A gets loaded it will be loaded with X,Y,Z.
If A is a cube and if you wish you can bring X,Y,Z also in the cube in one or more dimensions.
If you keep X,Y,Z as vag attributes rather than in te cube as dimensions, then , the system will generate SIDs for them.
Ravi Thothadri

Identifying the attributes of the sound or speech.

Hi,
I want to record two voices say one of mine and another of my girl friend. After that I want to compare these two and to find out the extent of the difference in some attributes such as pitch, depth, loudness of voice etc.Actually I want to find out the the properties of voice due to which one voice is different than other. Can I do this using java? If yes then how it is possible??
Kindly reply soon, this is going to be an emergency (now it is not but may b in near future any time).
Thanks in advance.
Abhideep

Alt tags and title tags appearances are, for better or worse, determined by the browser. This means you can't style it it with CSS.
But using Javascript you can create your own "titles" that use positioned divs and CSS styling to "make" your own styled alt tags. Do a web search to learn more.

Extending the Attributes on the Header DFF

Similar Messages

Maybe you are looking for