Extending the DP Planning area time horizon

Hi gurus,
we would like to extend the DP planning area horizon now. the current planning area storage bucket profile and the time series for the planning area are only until 01.03.2012, i want to extend the horizon beyon this ..what is the exact procedure for this..
do i need to change the storage bucket prfl horizons first before extending or..pls advice..
Thanks

Hi,
I am sorry for the delay but i think you were talking about "time bucket does not exist" when you have said time buckets missing.
If my assumption is correct, then the inconsistency is from the livecache side. There will be a missing time grid in the livecache.
The programs which may delete this time grid is /SAPAPO/TS_LCM_REORG and execution of tcode /sapapo/om17. If these were running during that time then this inconsistency will be caused. Most probably i have seen this error only during extraction. When extracting data, the system creates a so-called timegrid for reading data. This timegrid is deleted at the end of each activity. But if during the extraction, the timegrid is deleted due to some other programs or process, the error 'Time bucket does not exist' will occur.
I think /SAPAPO/TS_LCM_CONS_CHECK may detect the error but it will be resolved if you run /SAPAPO/TS_LCM_REORG now.
I hope the above information helps.
Thanks and Regards,
Nithin.

Similar Messages

  • HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

    I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

    What model and firmware is the 2TB TC?
    What firmware is the AE?
    Does the AE get good signal from the TC in its current location?
    Signal can only be extended that is received intact.
    Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
    I am fairly sure you are going to tell me your TC is AC model..
    I would do a couple of things..
    1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
    2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
    3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
    Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
    http://support.apple.com/kb/HT5606

  • I want to extend the range of my Time Capsule, can I use Universal WiFi Range Extender, 4-port WiFi Adapter WN2000RPT?

    I want to extend the range of my Time Capsule, can I use Universal WiFi Range Extender, 4-port WiFi Adapter WN2000RPT?

    A universal may work but reliability tends to be poor..
    You are much better using another airport .. extreme or express.. even a second hand older one.
    Or do not use wireless bridge or repeater.. simply run ethernet or use EOP adapters to a second WAP run independently of the main router.. it is far more reliable and far faster solution .. wireless bridge/repeater will halve your wireless speed.

  • Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

    hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
    could you tell me how best to set airport express up to extend my wifi range?

    Greetings,
    This is called an "Extended wireless network".
    Read this article for details and steps on how to extend your TimeCapsule's network:
    http://support.apple.com/kb/HT4259
    Cheers.

  • Hi Getting Abap dump when in RRP3 when deactivating the DP Planning area

    Hi
    We are using the Consumption group by this releasing Forecast to SNP at Customer level also along with product and location level,i am doing in dev only,
    Issue :I have deactivated the DP Planning area(because of some modification) then activated/Initialized the DP Planning area, After that when I see  in the RRP3 for the product  it is getting Abap dump,CVCs now it is available also, Please let me know how to correct it

    KKK,
    I doubt that the event of deactivating/reactivating the DP PA is the cause of your ABAP dumps in //RRP3.  More likely the problem is related to a LC inconsistency, or a userexit.
    Run all of your LC consistency checks, they are easy to do and quick to run.  And, like any other dump, read the messages in the dumps to find out what went wrong.
    Best Regards,
    DB49

  • How to find out the corresponding planning area for a given infosource?

    Hi,
    We are in the process of implementing BW-APO in our project.
    We have got couple of standard BI infosources and now the task is to identify the corresponding planning area for a given infosource..
    Let' say for 0APO_DP_ORDERANALYTICS_1
    what is the planning area?
    Any help is appreciatable!!!
    Regards,
    Swapna.G

    Hi Swapna.
    You are at risk of putting the cart before the horse here. As Sujay asks, it is important to understand whether you are using the standard provided planning areas. Even then there are a number of different planning areas that may be deployed depending upon the required planning functionality. There then may be the case where standard planning areas are not being used (this is very often the case) which means that your InfoSources might only be good as a template.
    All this makes your question virtually impossible to answer.
    Maybe if you gave some background as to the status of your project we could help more.
    From your question it looks as if you are working on APO-BW outbound (i.e., reporting after the planning has taken place) which would suggest that the design and build of APO-BW inbound and the planning functionality has taken place. Is this the case?
    If so, then you need to touch base with your APO technical guys to understand the design of the planning areas and whether your standard 0APO_* InfoSources are suitable.
    If not, I suggest you are working back to front and you should be focussing on the APO-BW inbound required to support the planning requirements.
    Regards, Mark.

  • Can I extend the range of my Time Capsule with an Airport Express?

    I have read on Apple's description of the Airport Express that it is possible to extend the range of an existing network. I have the OLDER version of the Time Capsule (it is still wireless-N but it can only broadcast EITHER 2.4 or 5 gHZ at a given time) that does not have the simultaneous broadcasting. Can I still use the Airport Express to extend the range of my Time Capsule network?

    i think you have the same concern as mine....
    would the express extend the n or g networks? i am pretty sure it cant dual broadcast.....
    my guess is that it would extend the n network by default, but if an iphone hooks up to the part of the network that the express is covering, it will probably slow down to a g speed.
    i am one of those that suffer from my existing airport extreme and express slowing down when i turn on my ipod touch or iphone! the whole network slows down to the lowest common denominator.
    by getting the new time capsule (or the new airport extreme), i will be fine in the part of the house that is being served by the new machines, but i am expecting the network to slow down where the express is in incharge!
    this is all in preparation to buy a new TC...... is my understanding correct?

  • Re activate/ Re generate the BPS Planning area

    Hi Friends,
    It looks like there is some inconsistency in of planning area. Does anybody know how to reactivate or regenrate the planning area using any SAP Provided Function modules or standard programs. Please share your ideas on this.
    Thanks
    Best regards
    SG

    Hi,
    when you call transaction BPS0 the system should detect inconsistencies and regenerate automatically.
    There is no official API to regenerate the planning area. When for whatever reason the regenerate mechanism in BPS0
    does not work, maybe this is worth an OSS message. You may also try function module UPC_GENERATE_AREA. Run this function module in SE37, in only input parameter is the planning area. But you should know what you are doing.
    Regards,
    Gregor

  • I am not able to see the entire planning area in bw3.5 bps?

    HI All,
    I happened to click on the planning profile And hence only that planning profile related planning areas are now visible on the BPSO tcode.
    How do i view all the Planning areas created by different users.
    How to unchange the planning profile so that i can view all the planning areas.
    Thanks
    Pooja

    Hi Pooja,
    If you goto Edit from Menu bar, there you will find the General Overview option, if you click on that you can see other planning areas also.
    Hope this helps.
    Veerendra.

  • How can you extend the signal range of time capsule

    I have a time capsule in my office down stairs, and my apple tv upstairs, but the signal strength is very week (only one bar) so when I try to stream a movie is very slow. There is some thing I can do or buy to make the signal stronger??
    Thank you.

    You can add an AirPort Extreme to "extend a wireless network" to improve the wireless signal. Locate the AirPort Extreme approximately half way between the Time Capsule and the Apple TV.
    Setup instructions are here:
    Extended network

  • Extending the range of my Time Capsule N Network

    Not sure whether I should post this here or on the TC forum but...my TC is set to provide a wireless N only network at 5ghz but the range is not long enough to reach all parts of my house.
    A google search didn't seem to show any range extenders for wireless N networks.
    Does anyone know if I can use either an airport extreme base station or an airport express base station as a range extender?
    I know I can use either as an access point but that means that data will only get to the base station at max 200mbps (I have a powerline network with a max speed of 200mbps) whereas I know my macbook is connecting to the TC at 270mbps which is why I'd really like to achieve this with a range extender.
    Any ideas?
    Thanks,
    Anthony

    Does anyone know if I can use either an airport extreme base station or an airport express base station as a range extender?
    Yes, you can use either the 802.11n AirPort Extreme or AirPort Express base stations to wirelessly extend your Time Capsule's wireless network.

  • How do I extend the length of recording time?

    Right now, I can only record to 106 minutes. Is there a way to extend this?
    Thanks ya'll!

    http://thehangtime.com/gb/gbfaq2.html#recordlength

  • Time Series Objects for a Planning Area

    Hi all,
    Can anyone let me know why do we create Time Series Objects for a Planning Area.
    What is its Role & significance..
    Regards,.
    Vishal.S.Pandya

    time series is usually a Demand planning concept(and used in SNP as well but in SNP its predominantly the order series that plays a main role)
    time series is a general concept in statistics(and forecasting) wherein the value of a key figure is represented in a time bucket
    Time series gives you an idea of the gradual change in the values by time and the relation of the future based on the past
    planning area in APO (and other tools) tries to represent this as a 2 dimensional model with time on the columns and key figures in the rows. the value that you load into the cells that are formed by the above are based on the characterisitic values you choose from your MPOS which is linked to the way the values are stored in the planning  area
    The planning area stores data for each key figure in the smallest unit of time(technical storage buckets) and the lowest level of characterisitc value combination

  • Consider planned delivery time field in MRP Areas

    Hi,
    I would like to know if the "Consider Planned Delivery Time" field in the MRP areas is taken into the scheduling of materials during MRP run? From the help documentation, it seems to be yes. Otherwise the system will take the Planned Delivery Time from the Plant level. May I ask how we can tick this field for all materials? We are currently in the process of activating the MRP areas in our system. Before, we didn't use the MRP areas but we think the need for it has arrived. Is there a mass maintenance tool to do this? Or do I have to use LSMW? Thanks!
    Regards,
    Chester

    Hello Chester
    If you flag the field "consider planned delivery time" the planned delivery time defined on the MRP area will be considered by MRP. You should tick it for all the materials if the value from the MRP area should be considered.
    Also, the report RMMDDIBE can be used for mass processing of MRP areas.
    BR
    Caetano

  • Help: An error when I initial the planning areas:internal error

    Hi,
      An error when I initial the planning areas, I create time series objects for planning area DP01, system show an error message to me as follow:
      internal error [/SAPAPO/OM_TS_TGRID_CREATE]
      Message no. /SAPAPO/TSM099
    Thanks,
      Thomson

    Hi Thomson,
    I think in planning area you did not only add the time series key figures
    to the planning area but also defined key figure semantics for those
    key figures. This must not be. To see those semantics you can check
    the key figure details in transaction /SAPAPO/MSDP_ADMIN on the
    key figure tab by selecting key figure details. For the time series
    keyfigures, the semantics column is filled with values like 300, 301,
    etc. If you wants to use time series key figures in addition
    to the standard SNP-key figures, the semantics field has to be empty.
    You can compare that with the settings in the other planning area where
    everything is working fine.
    If this is not the case then please refer the below note and execute the consistency reports as in note:
    577038     Data inconsistencies in SNP
    Regards,
    Sunitha.

Maybe you are looking for