Extending the existing functional locations to a new plant?

Hi Sapiens,
The following is my concern:
Q1) I have a set of functional locations(roughly around 5000 records) assigned to say Plant A.
I would like to extend these existing functional locations to Plant B. I am not permitted to do this using LSMW. I should execute this operation in one shot.
How to accomplish this?
Q2) After attaching all the functional locations to Plant B, i should replace the first 4 characters of the functional location structure with the Plant Code itself. Again not through an lsmw. How to accomplish this in one shot?
Please let me know the procedure of doing it with some guidelines.
Thanks in Advance,
Vijaya

Hi
1. You can extentd to the other plant with SCAT ,BDC etc
2. But You can not replace the first four letters from the FL with the New plant code.Remember this is a master data
Regardas
Jignesh

Similar Messages

  • I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

    I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

    Extending using a wireless connection always results in a performance compromise.
    If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
    Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
    If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
    Post back to let us know which way to you want to go.

  • I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

    i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

    Please post (a relevant section of) it right on this Forum.

  • How to delete the incorrected Functional Location / Equipment

    Dear PM Guru's
    please let me know the procedure to delete the incorrected functional location / equipment or any other data like plans, orders, task lists etc. i went in change mode and i clicked on Deletion flag and clicked on Set option. when it will be deleted from data base is it required any other customized settings. if any thing required please tell me.
    regards
    jalu

    Hey,
    Deletion in SAP is not easily possible. That's is the reason, so much attention is given while creating such masters. Most of the masters in SAP can only be flagged for deletion i.e. you don't move it out.
    To move out from database, you need to perform Archiving. It's a separate function, which is performed, servers handling the archival data are different.Accessing the archived data is also different. Once you archive, the flagged for deletion items are essentially moved and you don't see them in your regular servers.
    As of now, you can only flag them for deletion. I hope this explanation makes things clear.
    Regards,
    Ketul

  • Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))

    While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
    Can someone help us in resolving this
    Thanks and regards
    RS

    Please expand the log also please check the SAP note 1835436
    Regards
    Aneesh

  • Duplicating the existing sourcesystem assignments to a new source-system

    Hi all
    We have another new sourcesystem (logical system) in our BI system.
    This is a copy of the productive erp-sytsem, upgraded to EHP4.
    Now we want to test the connectivities and data load procedures.
    Is there a possibility to "copy" all the existing datasources/transformations of an existing system
    to this new system without using transports?
    We already tried using report 'RBDLSMAP' but it seems to overwrite the existing assignments.
    Any idea??
    Thanks
    Thomas

    Hello Thomas,
    You have to use a transport , to transport the source system dependent objects normally the following procedure is used:
    RSA1
    Transport Connection
    Button 'Collection mode'  set to 'start manual collection'
    Press 'Source system assignment' button (it's the one left of the
    'Request BEx' button)
    Select the source systems you want to save the transfer rules for
    Continue
    Button 'Grouping' set to 'Save for system copy'
    At the left border click on 'Object Types'
    Extend tree  'Source system' LSYS
    Double click on 'Select objects'
    Select the source systems you want to collect objects for
    the source system is now displayed in the right box
    Press collecting button ('gather dependent objects')
    this may take a while
    Right click on the root of the tree and select
    Transport all below
    Expand the whole tree and check if there isn't an object which is locked
    by an other open transport request !!
    (the column 'Transport request' has to be empty (BEFORE deleting the corresponding source system
    connection!)
    Kind Regards,
    Des

  • Modifying the existing search base to a new one

    My CoreId is having search base set to "dc=abc, dc=com". For some better architecture reasoning, now I wanted to change the search base to a new Ldap node called "Users,dc=abc,dc=com". I will move all our users and groups from earlier node "dc=abc, dc=com" to the new one "Users,dc=abc,dc=com". So all my users and groups will have different entryDN after the move, but they will carry the same user-id/ group-id.
    Here are few questions related to this.
    (1) All workflows refer to many users and groups. By changing the search-base will it refer to the new location automatically –OR- I have to manually change all the work flow by reselecting the users and groups.
    (2) Do I have to redefine all our static groups again since all users have different entryDN now?
    (3) Do I have to do any modifications to all the existing authentication schemes etc.
    (4) Any other modification/ tasks ??
    Thanks!
    Kp

    Hello Saggu, Before running this conversion tool I have few specific questions.
    What is the meaning of these options for obmigratedn.exe
    -c <configDN> : I am assuming this is Oblix configuration dn value (o=Oblix,dc=abc,dc=com) provided during CoreId set up
    -o <oblixnode> : ???
    -i <installdir> : Is this the CoreId installation Directory ??
    -n <native_dn> : ???
    -l <logical_dn> :???
    Just a note :- I wanted to change only the use DNs (example "cn=kabi,dc=abc,dc=com" to "cn=kabi,o=employee,dc=abc,dc=com"). Oblix configuration remain at old node. Not sure if I should run this tool.

  • Extending an existing wireless network with a new Airport Extreme(802.11n)

    Is it possible to extrend a existing wireless network comprised on a Airport Extreme (g) and a Airport Express with a new Airport Extreme (n) ? and possibly accesss an airdisk? Have tried settng channel to the same (1) but no worky.
    I have had real problems (at least 2 hours with Apple Care to no avail) at getting the new Airport Extreme(n) to connect to the internet (Ozemail/iinet) with PPOE. Authentication when changed to occur at ADSL modem and produces no errors (green light) but no internet still through AE(n). Not Hardware either as both ADSL modem and AE(n) have been changed.
    So as a last ditch attempt, thought I might try extending the preexisting network that works fine so I can access an AirDisk.
    Any reponses appreciated.

    Search this forum for "WDS". Since I am having massive problems myself right now, I can only tell you: Try the two methods mentioned in this thread:
    http://discussions.apple.com/thread.jspa?threadID=944334&tstart=0
    Maybe you're lucky!

  • PM:  Transaction IE02 functional location change creates new EQUZ?

    Everytime we execute transaction IE02 and change the functional location, it apparently creates a new EQUZ record (new valid from date).  There is a scenario where we do NOT want this to happen.  In other words, we have an equipment, say EQ123.  We want this equipment to have one history record per a cycle that might include several changes in the functional location.  When the cycle is complete, then we can create a new history (EQUZ) record.  That cycle might be warehouse departure to warehouse return.
    Is this possible.  If so, can it be configured or done so that this only applies to a certain set of equipment (say equipment belonging to plant PXYZ)?
    Thanks in advance,
    Glen.

    Glen,
    I hope I understood your requirement clearly. Usage history is mainly maintained in the ILOA and EQUZ tables together. So when u look up a usage list, data is retrieved from these two tables together. Now, there is a provision in customization to specify which field values if changed should appear as a history update. For instance, as u said if the functional location changes it should not be logged in the history. Whereas if the equipment steps out of the warehouse or returns there should be an update to its history. The following is the path in IMG to achieve this:
    SAP Customizing Implementation Guide--> Plant Maintenance and Customer Service --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Equipment --> Equipment Usage Period --> Define History-Related Fields
    thanks
    Bala

  • How can i extend the filter function to also include an option to select which column to filter on?

    Hi.
    I have built an spry test-page (testing it on my localhost  so i cannot give you direct access to it) here i have an XML file that i show in an dynamic/ repeat table with 5 columns.
    I hvae included an spry filter function to easy filter out records, but the code only allows me to filter on one of the columns.
    I would like to add an extra "select-menu" to define which column the filter should be active for, how can i do that
    Here is the filter code and also the html code for the select-menu and the box to type in what to filter.
    The bold parts is the important parts, i would like the options values from the select menu to be inserted in the filterData function to be able to define which column to do the filtering on.
    var ds1 = new Spry.Data.XMLDataSet("report3.xml", "orders/order", {sortOnLoad: "@id", sortOrderOnLoad: "descending"});
    ds1.setColumnType("date", "date");
    ds1.setColumnType("BUTIKNR", "number");
    ds1.setColumnType("EXTRAFRAKT", "number");
    ds1.setColumnType("job/@idx", "number");
    var jobs = new Spry.Data.NestedXMLDataSet(ds1, "job");
    function FilterData()
        var tf = document.getElementById("filterTF");
        var menu = document.getElementById("searchIdent");
        if (!tf.value)
            // If the text field is empty, remove any filter
            // that is set on the data set.
            ds1.filter(null);
            return;
        // Set a filter on the data set that matches any row
        // that begins with the string in the text field.
        var regExpStr = tf.value;
        if (!document.getElementById("containsCB").checked)
            regExpStr = "^" + regExpStr;
        var regExp = new RegExp(regExpStr, "i");
        var filterFunc = function(ds, row, rowNumber)
            var str = row["@id"];
            if (str && str.search(regExp) != -1)
                return row;
            return null;
        ds1.filter(filterFunc);
    function StartFilterTimer()
        if (StartFilterTimer.timerID)
            clearTimeout(StartFilterTimer.timerID);
        StartFilterTimer.timerID = setTimeout(function() { StartFilterTimer.timerID = null; FilterData(); }, 100);
    html:
                <select name="searchIdent" size="1" id="searchIdent">
                    <option value="@id" selected="selected">ID</option>
                    <option value="date">DATUM</option>
                    <option value="time">TID</option>
                    <option value="BUTIKNR">BUTIK</option>
                    <option value="REF">REFERENS</option>
                  </select>
              <input type="text" id="filterTF" onkeyup="StartFilterTimer();" />
    Contains:
      <input type="checkbox" id="containsCB" /></td>
    Thanks in advance.
    //Rickard H

    Now it works, i had to do it like this:
        var filterFunc = function(ds, row, rowNumber)
            var str = row["@id"];
            if (str && str.search(regExp) != -1)
                return row;
            var str1 = row["date"];
            if (str1 && str1.search(regExp) != -1)
                return row;
            var str2 = row["time"];
            if (str2 && str2.search(regExp) != -1)
                return row;
            var str3 = row["BUTIKNR"];
            if (str3 && str3.search(regExp) != -1)
                return row;
            var str4 = row["REF"];
            if (str4 && str4.search(regExp) != -1)
                return row;
            return null;
    I also had to remove the line "ds1.setColumnType("BUTIKNR", "number");" from the code, otherwise it would not search at all (only searches string types?).

  • Copy the Existing Emp Vendor Balances to New Emp Vendor Balance

    Dear all,
    I am stuck in a situation where in i need to copy the Balances of the Existing Empl Vendor to the New Emp Vendor.
    What i am looking for :
    Existing Emp No :- E0123
    Existing op Balance :- 125.00 rs
    I want to Transfer the Existing Emp Vendor to New Emp Vendor
    like New Emp Vendor : 4xxxx123
    Existing op Balance :- 125.00 rs
    How to achieve this ??
    Please help.
    with rgds
    Ranjith Singh

    Hi Ranjith,
    You can copy one vendor to another using the transaction XK01
    Regards
    Brinda

  • How to find the existing function module is used in another function module

    Hi all,
    I created a function module and the same one is called from another function module.
    When I tried to find where the  first function module is used  using  Where-used List , I am getting the message "function module not found in selected areas" .
    Please  guide me what is other method to find whether the function module is used in another one.
    Thanks,
    Vengal Rao.

    hi,
    Go to UTILITIES-> Update Navigation index.
    or go to fucntion group and Generate the Funtion group once.
    it will detect all fucntion modules under that function group.
    regards,
    Rama

  • HT5622 My email address changed, my iCloud still has my old address. Do I just cancel the existing one and open a new one under the new address or what?

    My email address changed, my iCloud still has my old address associated with it. Do I just cancel the old iCloud and start awe one or what?

    Hello sheryfromzaf
    Check out the articles below to go through the steps of changing your Apple ID and then what to do after you change your Apple ID. You will probably not have to change all the Apple ID for all services, just the ones that you use.
    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/ht5621
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796
    Regards,
    -Norm G.

  • Avoid Email address check while creating or changes functional location PM

    Hi Experts,
       We have upgraded 4.6C system to ECC 6.0 with EHP4.
    We are tring to change the existing functional location created in 4.6c through tcode IL02 -> location tab -> Email address.
    and tring to maintain value as 'CAP 20/20/97' in email address field but it pop-ups with the error message as
    'Email address 'CAP 20/20/97' is invalid'.
    We know this is a SAP standard check but as part of the AS IS functionality, end user is able to maintain the same value in 4.6c and expecting same in ECC 6.0.
    NOte : End user is using this field SMTP_ADDR (Email address) for multiple purposes.
    When we reached SAP, following is the SAP responce.
    This validity check is in compliance with RFC 2822.
    This behaviour is standard since note 799902. If you would like to see
    this functionality changed then please proceed as outlined in the
    attached note 11.
    Can any one provide work around solution to avoid the Email address validity check ?
    Regards,
    Suresh Goud.

    Hi Pete,
    I just want to find out the reason for occuring this issue in ECC 6.0. Is because of any incomplete validation / missing configuration / implementation of any other SAP Note ? PFA the SAP note details for your easy reference.
    SAP Note No. 1546997 
    Number 1546997
    Version 1
    Processor
    Processing Status New
    Implement. Status Cannot be implemented
    Language EN
    Short Text Correction of translation of '<Email address & invalid>'
    Component XX-TRANSL-NL
    Long Text
    Symptom
    Wrong translation /
    Reason and Prerequisites
    Solution
    Translation of objects using transaction SE63 (see further below)
    Transport Object(s):
    PgID Object Name
    LIMU MESS XS138
    Package: SCON
    Software Component: SAP_BASIS
    Application Component: BC-SRV-COM
    Translation Guideline:
    English Text: Email address
    Other terms
    SE63, SE91
    Valid Releases
    SAP Basis component
    SAP Note No. 1546997 11/11/2013 Page 2
    46C
    620
    640
    700
    710
    711
    701
    702
    720
    730
    Links to Support Packages
    Software Component Release Package Name
    Thanks & Regards,
    Lakshmi S

  • How can I change the default start-up date for a new functional location?

    Is there a way to change the default date when creating a functional location? Whenever we create a new functional location, there is a date populated in the start-up date field. This date is our go-live date from last year and I cannot find the location in the IMG (if there is one) to stop the date from automatically populating with the date from the superior functional location. I tried setting the field from input to required but the date still populates automatically. Does anyone have any suggestions on how to leave the start-up date field blank when creating a new functional location?

    That field is generally picked up from the immediate superior FL in the hierarchy through the inheritance functionality.You will have to overwrite this date.I dont think you can clear this field through Configuration functionality.
    If you are in Ecc 6.0, you could get the help of developer to use implicit enhancement to initialize the field contents.
    Regards
    Narasimhan

Maybe you are looking for