Extending the ring time on nokia 6120

Can anyone please help with the code or how to change the length of the ring time on nokia 6120

As others have pointed out, this is a newtork feature.
The GSM standard allows for ring times from 5 to 30 seconds in 5 second increments. You can set it by going into your phone's call divert settings, more precisely the "call divert if no answer" setting. Set it to divert to voicemail, and you will be asked to select a delay from 5 to 30 seconds. Once you've done that, the phone sends a command to your network telling it to wait however many seconds before shunting inbound calls to voicemail.
Note that some networks override the setting you give here. If this is the case here you'll need to phone your operator and ask them if there's anything they can do.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

How do I extend the ring time before answering the phone

I want to extend the ring time on my iPhone as it currently only rings for 5 seconds and then goes to message.

The following works on my iPhone, enter the code...
**61*901*11*NN# Send
Where NN is the number of seconds, in increments of 5, to a maximum of 30 seconds.

How to extend the execution time of an ABAP Program using the Process chain

Hello Sapians,
Our Environment has got 600seconds = 10 mintues as the execution time.
My ABAP Program is taking more than this 600 seconds, to show the result, I found this when I tried to execute in debug mode, it shows the result.
If I execute in background also it shows the results succesfully.
Only issue is when I execute this report in foreground it has been taking ages and goes on Time OUT Error.
It has been decided that we can extend the execution time only for this report, and it will reset the time back to 10mintues once the report has been executed successfully or failed in between for any other reasons.
And we can achieve this by using the process chains.
Can any body help me please in this regard
Thanks,

Hi,,,,,,,,,,
Besides Process Chain There is another way out for this........
Resetting time counter of dialog process so that time-out does not
happen. Use this fm within your program at appropriate locations to
reset time counter.
"CALL FUNCTION 'TH_REDISPATCH'."
Thanks
Saurabh

How to see the Ringing Time of a Missed Call?

How to see the Ringing Time of a Missed Call?

I wanna see the missed call as a Genuine Call (Ringing for the full time) or a mere signal of a few second as a request for call back.

Evaluation of SQL Server 2012 R2 expired is there any way to extended the evaluation time?

Hello,
My Evaluation of SQL Server 2012 R2 expired is there any way to extended the evaluation time?
Please let me know,
Thank You! and Happy New Year

Hello,
Try to roll back the time of the computer to a few days back until you are able to perform an edition upgrade.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Extend the Ring delay before switch to voicemail

How do I Extend the Ring delay before switch to voicemail?

You will need to contact your cellular provider to make changes to the number of rings.

Is there a way to use the battery on my ipad to extend the talk time on my iphone?

Is there any way to use the ipad battery to extend the talk time on my iphone?

I don't understand what you are asking. Do you mean connecting the iPad to the iPhone with a double-ended dock connector cable to transfer the battery energy to the iPhone?
If that's what you mean, I'm pretty sure that's impossible.

Is there any way to extend the spin time?

I'm retrieving heaps of old jobs from archived CDs and DVDs and what's becoming apparent is the time the CD/DVD is spinning. I can understand saving energy etc, but it's not very long at all, which means I've been spending about 3 or 4 seconds per job, waiting for the disc to spin up. Times that over the hundred+ jobs I've got, and it'll add up.. Is there any way to extend the spin time to something more like 30 seconds, or something else?

Hello Kit,
The only thing you could try is to deselect the "spin down hard disk's when possible" option in the energy saver System Pref's. I doubt this will provide much success, but its worth a shot.
Cheers
Bryza_Bone

Extending the Hunting time on a Hunt Group CUCM 8.5.1

Good afternoon. We are trying to implement a hunt group for our main switchboard. The scenario would be all calls to the home office come into a hunt pilot and then hunt, top down, to the main switchboard extension and then to a choice of 3 other devices that would be logged in. The problem is that we cannot get the hunt group to hunt longer than 1 minute. I have changed the RNA Reversion Timeout and with all the devices logged it, the call will only hunt until the 60 seconds has expired and then the call drops; 15 seconds at the RNA Reversion Timeout will get to all 4 devices - anything longer and the call drops before finishing the hunting process. From the information that I can find, a hunt group should "hunt" for up to 30 minutes (or so we read in the Hunt Pilot information). We're using a "Top Down" algorithm since we want all calls to always start at the switchboard directory number, and all of the Hunt Options are set to "Try Next member; then, try next group in Hunt List". The only place where we have indicated any time is on the Line Group - RNA Reversion Timeout. There are times where only the switchboard device may be logged into the hunt and we need to have that ring time at 60 seconds minimum for the call to be handled appropriately.
Is this a simple overlook on our part or are we limited in what we want to do?
Thanks for any insight that you can give us.
Cinde

Hi Cinde,
I just wanted to add a note to the excellent tips from my friend Aaron here (+5 "A")
The Maximum Hunt Timer is only leveraged when considering it in conjunction with the Call Forward settings on the Hunt Pilot config as noted here;
Maximum Hunt Timer
Enter a value (in seconds) that specifies the maximum time for hunting. Valid values specify 1 to 3600. The default value specifies 1800 seconds (30 minutes).
This timer cancels if either a hunt member answers the call or if the hunt list gets exhausted before the timer expires. If you do not specify a value for this timer, hunting continues until a hunt member answers or hunting exhausts. If neither event takes place, hunting continues for 30 minutes, after which the call gets taken for final treatment.
Note If hunting exceeds the number of hops that the Forward Maximum Hop Count service parameter specifies, hunting expires before the 30-minute maximum hunt timer value, and the caller receives a reorder tone.
In addition, Cisco Unified CM only uses the configuration for the Maximum Hunt Timer setting if you configure the Hunt Forward settings in the Hunt Pilot Configuration window.
From;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_5_1/ccmcfg/bccm-851-cm/b03htpil.html
There is an old bug that describes this in better detail;
Maximum Hunt Timer (MHT) description is unclear
CSCsg93573
Description
Symptom:
In the Hunt Pilot form, under Hunt Forward Settings, there is a field
called Maximum Hunt Timer (MHT). The description in the online help is misleading.
Currently, it conveys that the setting will be used when calling the Hunt Pilot
directly, which is not true. This setting is only used if Hunt Forward Settings
are configured.
So, to accomplish what you want you'll need to set up and link multiple Line Groups that contain the same 4 member DN's via the "Try next member,then try next Group in Hunt List" setting.
Let's say in our example the members of the first Line Group Called Main#1 are 3333,4444,5555 and 6666 then you create a second Line group called Main#2 that contains 3333,4444,5555 and 6666 and Main#3 that contains 3333,4444,5555 and 6666.
Include Main#1,Main#2 and Main#3 in the Hunt List; and Switch the rule on the first Line Group
to, Try next Member;then try next Group in Hunt List and Switch the rule on the Second Line
Group to, Try next Member;then try next Group in Hunt List.
This will then cycle through the Members 3333,4444,5555 and 6666 three complete times.
Cheers!
Rob

Extend the notification time out for SSHR approval requests

Hi,
I want to extend the due date (Approval notification time out) of SSHR notification approval from 3 to 5. But I could not able to found any attribute having 3 days (4320 minutes). In hrssa workflow, I have found the constant value 525600 for attribute HR_APPROVER_NTF_TIMEOUT_ATTR (Approver Notification timeout in Minutes).
Please help out how to change value of notification time out?
Regards,
Umar

Hi Kashif / Hassnain
I follow the given steps in suggested notes and did required changes for five days. It gives following errors while saving the workflow.
Note: It is the first time; I am doing modification in workflow. Please guide, is there any prerequisite which I need to follow before doing changes in workflow?
Errors:*
382: Design Validation generated 12 warning(s). You may save invalid definitions but they should not be used in running process.
354: 'SAVE' validation failed for activity 'HRSSA/HR_SAVE_FOR_LATER_OTHER_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_SAVE_FOR_LATER'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_NOTIFY_RFC_OTHER_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_NOTIFY_RFC_INITIATOR_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_NOTFY_APPROVER_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_INITIATOR_SFL_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_INITIATOR_RFC_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_APPROVER_SFL_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_APPROVER_RFC_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_APPROVER_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_APPRAISAL_REJECTED_PRC'.
362: Validation failed for child activity 'HRSSA/HR_NTF_FINAL_REJ_EMP_V4_NTF'.
383: Notification activity must be assigned a performer when used in a process.
328: 'SAVE' validation failed for message 'HRSSA/HR_APPRAISAL_MACHANGE_MGR_MSG'.
401: Could not find token 'APPRAISEE_NAME' among message attributes

Increasing the ring time on 8110 Pearl smartphone

My phone only rings 3 times before going to voicemail.
Other mobile phones I've used had an option to set the time the phone should ring for in seconds (usually up to a maximum of 30 seconds).
Does anyone know if this option exists on the 8110 Pearl smartphone?
Solved!
Go to Solution.

This is the code I have used:
If you have a GSM based phone, some have had success by dialing this number from your phone: **61*XXXXXXXXXXX**30#
Replace XXXXXXXXXXX with the number of your carrier voice mail center (find it by looking at your Phone Dialer > Options > VoiceMail > Access Number. Put your access number in place of the Xs above.
For example, the T-Mobile voice mail access number is 18056377243, and thus the string to dial would be **61*18056377243**30#
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Helpful Hint - Extending your Ring Time

If you wireless provider is Bell
Press *94 and the number of times you would like your phone to ring then talk/send. The max is 9 rings. I tried it and it worked....
Raphael
Love my BB Curve

All -- the length of time your cell phone (this is NOT a BB function, btw) rings before rolling to voice mail is controlled inside of your carriers network. The best way to get it adjusted, IMO, is to contact them and ask for assistance. I have seen codes for self-altering of this setting, but I've not bookmarked any of them...but your carrier can help you if they are willing to do so.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Change thes snooze time for nokia 1661 ?

Hello guys, I know I have this really old cheap phone, but I like it that way..... anyways I was wondering if anyone knows how to change the snooze intervals on this? I see that it's default 10 minutes, is there any way to change it? I remember seeing an option to edit that.
Thanks!

Try in
menu
settings
phone settings?
"Freedom is the only way, yeah!"

Extend ring times

How do you extend the ring time on a Nokia 6120

I don't know your model, but on some phones you can change the setting in the Call Divert menu, but only if the operator supports it.
Chris
6230i (the last bug-free Nokia?)
Vodafone UK contract since 1992

How to extend ringer time

I'm pretty sure the iPhone, like all phones, is set at a default ring time of 20 seconds. Is there any way on my own that I can manually extend the ring time to the maximum 30 seconds or do I have to call Apple customer service. If so what is the number I can call?

Here is what i know about the ringer time.
First type *#61#{SEND}. Your iPhone will show where your voicemail calls are being to sent to. Write down the number as for you will need later. Second type {STAR} {STAR} 61 {STAR}{the number you just wrote down}**30#{SEND}. When you get the confirmation dismiss it. Finally, check that your calls are still being forwarded to the correct number. Type *#61#{SEND} and verify its the same number as before.
There you have it, your now 30 second ringer.
Where you see {STAR} it means *, i couldnt get it to show it correctly.

Extending the ring time on nokia 6120

Similar Messages

Maybe you are looking for