Extending the setup matrix use

Hi
we would like to extend the setup matrix use for the halb products now, currently we use the setup matrix for the fert products and it works fine. our fert = halb+packing, when extending the setup matrix use to the halb products what changes need to be done.
do we have to create a new setup matrix for the halbs or..can you pls share your ideas..

Hi, its advisable to create a new setup matrix for the halb product.
Ensure all the w.c on which setup sequencing is to be done are single mixed resource.
Assign the newly created setup matrix to single mixed resource
In the routing assign the setup group
Re transfer your PDS
create a test planned order in APO rrp3 and test if the setup group is arriving or not
You ca use the existing sequencing heuristics
Regards
Amlan

Similar Messages

Error "Extend the destination address using the location input help"

Hi experts,
I got warning while creating travel expense from existing travel request.
the warning appear like this "Extend the destination address using the location input help"
I don't want user to enter detail of address trip destination.
how to avoid this?
thanks
Edited by: nzworld on Apr 29, 2011 5:42 AM

Hi,
If you are using ESS and you get the warning message when you enter details for a particular expense type. Please follow the config and hide the location details. Then you will not get this error message.
SAP Customizing Implementation Guide > Financial Accounting (New) > Travel Management > Travel Expenses > Dialog and Travel Expenses Control > Dialog Control > Field Control for Additional Receipt Information.
Enter your trip provision variant, select the expense type for which you dont want to enter the location details and then select details. Search for the variable location, select hide radio button and save.
Please let me know if you have further clarifications.
Regards,
Raj

Extend the same WLAN using more WLCs

I have a bit of a question,
We already have one 50 AP WLC 4402 in our organization, and currently we have ran out of the 50 AP license. Issue is we want to extend the WLAN to another area but because of the 50 AP max on our WLC we are faced with getting another 50 AP WLC.
My question is can we extend the SAME WLANs using another WLC. I know it will work for the WLC fail-over but not sure if using another WLC will give us the mobility/roaming feature throughout the organization we want. Do we needto go for WCS as well in this situation to deploy organization wide roaming?. Basically is there a way to make existing WLC and new one act like the same WLAN with roaming throughout or will using two WLCs be separate roaming domains.
Please advice. Thanks.
Cheers
Lal Antony
www.lalantony.com

Hi Lal,
Yes it is possible and works awesome!! here is the mobility link which gives you more info as well.. but in short for your question that you have.. We can extend the WLAN and there is no problen at all..
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mobil.html
My other suggestion will be to go for a WLC which supports more APs.. so that in future if we wanna extend the network, then there wont be any issues..
lemme know if this answered your question..
Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

How can we extend the subject line using SO_NEW_DOCUMENT_ATT_SEND_API1??

Hi,
I am triggering a mail using the function module SO_NEW_DOCUMENT_ATT_SEND_API1, where in the subject of the mail is passed using the DOC_CHNG-OBJ_DESCR, here the object_descr can only accomadate 50 characters.
But requirement is to have more than 50 characters may be 100 to 150 in the subject line.Please help me to extend.
Thanks in advance.

Hi,
Searched in the forum for the above requirement but didnt find the required info..
Please help me in finding a solution to this
Thanks in advance

Using the PPDS setup matrix

Hello All -
I have 3 products A,B and C which are run on a single line during a particular week(day). We have certain set-up times when we move from one product to another. Here are the set-up times:
The sequence in which these products run on the line is decided by the plant scheduler during production planning. The production planners run heuristics and peform manual changes to the planned orders. They know which product runs in which shift but they do not necessarily adjust the planned orders to the hourly level.
What we would like the system to do is somehow incorporate the set-up times when we move from one product to another. We would like to see the the resource being consumed during the set-up time.
Also, we are not in a position to use the optimizer. So any solutions involving the Optimizer are out of scope. Just want to achieve this using heuristics.
To achieve this, I have created the following master data:
1) Created 3 setup groups SG1(A), SG2(B), SG3(C).
2) Created a setup matrix SM1 and set up the transitions for all the above combinations.
3) Assign the setup group to operations in a ppm
4) Assign the setup matrix to the resource
I then created 3 planned orders in production planning for the SAME day. All 3 have the same availability time 23:59:59 and based on run-rates we have different start times.
I have the following questions:
1) Which DS heuristic should I use to adjust the start times and the end times of these orders by considering the set-up times in the setup matrix?
The resource should basically be consumed during these setup times. I have looked at "Reschedule" function in the DS planning board but I get an error when I run this. Please see end of this post for the error. The message says I may not have free capacity, but I do. I am using backward scheduling and infinite.
2) Is there anyway the set-up times/matrix can be considered during production planning itself and not during detailed scheduling?
3) Can the option of "Schedule Sequence" work for my scenario.
Appreciate all your help.
Varun
Error during scheduling
Message no. /SAPAPO/OM043
Diagnosis
The system could not schedule an order, operation or activity.
This could have the following causes:
The resource does not have any free working time or capacity.
If you have set planning direction backwards in the strategy profile:
There is not enough working time or capacity available for scheduling between now and the scheduling date.
If you have set planning direction forwards in the strategy profile:
There is not enough working time or capacity available for scheduling between the scheduling date and the end of the planning area.
If you plan characteristics-dependently:
You have assigned characteristics to operations of the order that do not agree with characteristics of the resources on which the operations are to be processed.
The system cannot find any suitable characteristics on the resources and so it cannot schedule.
Procedure
Depending on which of the above reasons is the cause, change the following settings:
Change the working times and capacities of the resources.
Set the planning mode "infinite planning" in the strategy profile.
Activate the planning direction forwards or backwards and reverse in the strategy profile.
Change the characteristics that you have assigned to the resource.

Thank you all -
It was a mistake on my part. I was supposed to create a new "set up" activity before processing activity and make that relevant to set-up. I had the processing step checked for setp all this while. Now its working.
Thanks
Varun

PPDS: I have a setup matrix in SAP ECC 6.0, and want to transfer the same to APO using Core Interface.

PPDS: I have a setup matrix in SAP ECC 6.0, and want to transfer the same to APO using Core Interface. Has anyone done it before?

Hi Subhash,
Please open this link to see the details:
http://help.sap.com/saphelp_scm70/helpdata/EN/89/bd3e42ce98033be10000000a1550b0/frameset.htm
You perform the data transfer in the following sequence:
Plant
Setup groups
Work centers
Routings
You check the setup groups in SAP APO.
You create the setup matrixes in SAP SCM.
Thanks, Marius

Scheduling using Setup Matrix in PPDS

Hi Gurus,
We are using PPDS Steup Matrix for scheduling orders. We have scenario that from product A to B, there is a changeover. And after producing A or B for certain hours, there is a cleanout of certain hours.
Ex- Orders A for 5 hrs, B for 5 Hrs. Setup Matrix: A-B=1 hr and Max order ( A or B)=7 hrs after which cleanout should happen.
While scheduling , A(5hrs) (Setup) B( 5 hrs), this is acheived.
But result should be A(5hrs)(Setup)B(2hrs)(Cleanout)(B 3hrs)
Please give your valuable inputs. How to map extra Cleanout ??/ Should we ceate another setup matrix for cleanout?? Can system take multiple setup matrix???
thanks,
Priya

Hi Priya,
I think Your case can be achieved through campaigm planning.
Create a setup group 'PROD' in ECC.
Under setup group 'PROD' maintain setup keys as 'A' & 'B'
Assign these setup group and setup keys in master recipe.
Maintain the same setup group & keys in APO also and than CIF PPM.
Maintain the setup matrix and assign it to resources
Create a campaign profile for 'PROD' with no of chargers(Orders) as 7.
Now schedule orders by using optimization.
After that create campaigns by using campaign heuristics on the resources.Campaigns will be created for every 7 hours.
And then create cleanout order by using cleanout heuristics between campaigns.
By this you will achiece setup between products and change over after your max run length also achieved by cleanout order between campaigns.
Hope this is clear.
Regards
Sravan

Error while filling the Setup tables

Hi Experts,
I tried to fill the setup tables using the transaction code SBIW. But there I found an error saying that
"Error determining rate: foreign curr. local curr. EUR date 25.07.2007 (doc. 2497)
Message no. M2810".
Please help me in this..
With Regards,
Yokesh Kumar.

Hello Yokesh,
Please check whether the Exchange rates that are used in the records are maintained in SPRO.
Thanks
Chandran

Is it possible to extend the title of a "DATE" column?

Hi I have made a table;
SQL> SELECT * FROM BookCopy;
BCID BTID DATEACQUI DATEDESTR
120 9 09-FEB-06
But the title is meant to say "DATEACQUIRED" but it only says "DATEACQUI"
Does anyone know if it is possible to extend the title without using VARCHAR, thanks

Hi,
In SQL*Plus, you can set the width of a DATE column the same way you do it for a VARCHAR2.
COLUMN dateacquired FORMAT A12
SELECT SYSDATE AS dateacquired
FROM dual;produces
DATEACQUIRED
29-JAN-09

Problem in filling up the setup tables for 2LIS_11_VAHDR (All SD Data sources)

Hello All,
I have been trying to fillup the setup tables for SD datasources( Application-11 Ex:2LIS_11_VAHDR), but it was not allowing me to do that.
Below are the steps i have followed,
1.Deleted the setup tables using tcode-LBWG- Application-11
2.Cleared the queues in RSA7 and found 0 queues for 2LIS_11_VAHDR D.S by triggereing the I.P till it get zeroes.
3.Checked the data in RSA3-No data found.
4.Filling the setup tables using OLI7BW t-code, got a popu(Data for 2LIS_11_VAHDR has to still transfered)
Do i need clear all the queues for SD-Billings,Orders e.t.c since i have 8 data sources to be cleared apart from 2LIS_11_VAHDR .
Could you please suggest any other option to fillup the setup tables.
Regards,
Siva

Did you run the infopackage twice pertaining to 2lis_11_vahdr.One for delta and another time for repeat delta.As delta queue will hold the records in repeat delta mode as well.
Also in case of Direct Delta --Data is transferred to Base tables and delta queue (RSA7) at the same time.So extraction queue (LBWG )and update tables(SM13) does not come into the picture.
Regards,
AL

Trying to extend the WLAN range by adding an additional Airport Extreme second gen with Ethernet as backchannel.

Hi,
I'm trying to extend the coverage of my home WLAN by adding an additional airport express. I want to use Ethernet as the back channel but whatever I do this ends up in a situation where the WLAN dies completely. I have been able to extend the range by using WLAN to WLAN extension but this reduced the bandwidth a lot.
I have an VDSL modem and uses a airport express as access router. with this unit operating by iteself everything works fine.
It is when I add a second airport express (both second gen) that I get in trouble.
Any idea of what goes wrong?

It is best to set up the extra AE to create a wireless network. You should use the same name (SSID) as you did when setting up the first one. Also use the same password and encryption.
Put the network channel selection on automatic or select different channels for both networks.

HT1515 extend a wireless network using my airport express

I bought an airport express back in 2006 with my macbook. I recently bought a time capsule and am now using it as my wireless router. Can I use my old airport express to extend / boost my wireless signal throughout my house? if so how?

Check the label on the side of the AirPort Express to see if the version that you have includes the feature to "extend" a wireless network.
If it does, you will see Model No A1264 there.
If you see A1088 or A1084, unfortunately this version of the Express does not have the ability to "extend" the wireless signal using wireless only.

Setup Matrix volume Doubts

Hi experts,
I have a couple of questions concerning the setup matrix volume.
1-a)What setup matrix combination volume is considered as acceptable?
b)Which is the break point from where performance issues take place?
3-What happens if the optimizer is optimizing orders and within those orders , there are features which are not included in the matrix.If this eventuality occurs, how the optimizer reacts?
Regards,
Analí

Thanks a lot for your advise Frank!!
Question Still pending review:
3-What happens if the optimizer is optimizing orders and within those orders , there are features which are not included in the matrix.If this eventuality occurs, how the optimizer reacts?
regards,
Analí

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

Start by establishing a permanent fixed Ethernet cable connection from one of the available LAN <-> ports on the ATT modem/router to the WAN "O" port on the AirPort Extreme.
Ethernet cabling can be run up to 300+ feet or 100 meters, so you should be able to locate the AirPort Extreme exactly where it will be needed to provide more wireless signal coverage.
Configure the AirPort Extreme to "create" a wireless network using exactly the same wireless network name, same wireless security setting, and same wireless network password that the ATT wireless is using.
The final step is to insure that the AirPort Extreme is configured to operate in Bridge Mode, so it will work correctly with the ATT modem/router.
If you need more specific steps, we need to know what operating system you are using on your Mac or PC. If you have a Mac and do not know which operating system it is using.....click the Apple icon in the upper left corner of the screen and then click About This Mac, and post back with the OS X version number that you see there.

Extending the setup matrix use

Similar Messages

Maybe you are looking for