Extending Time Capsule primary and guest networks with 2nd Time Capsule

Hi
I have two Time Capsules. The first is configured to run a primary and guest network. It is connected to an ADSL modem. All of this works fine.
The second Time Capsule is cable connected to the first, in a 2nd location (a next door building).
I want the 2nd Time Capsule to extend _both_ primary and secondary networks in its location.
How do I configure the 2nd Time Capsule (and the first if there is anything I have to do there to get this to work).
Please! and thanks...
Graham

Sorry, but the Guest network cannot be extended either through wireless or Ethernet.
If you would like to see this feature in a future product, you might want to let Apple know
Apple - Time Capsule - Feedback

Similar Messages

  • Extend both main and guest networks with a 2nd Time Capsule?

    I have a 4th generation 2TB Time Capsule set up to broadcast primary and guest networks.  I am running out of storage.  I would like to increase my storage and I would also like to extend both primary and guest networks.
    I currently use an older Linksys router (WRT330N) operating in bridge mode (wired connection to the TC) to extend the primary network, but it does not extend the guest network.
    If I purchase a second (5th generation) Time Capsule to replace the Linksys, can it be set up to extend both the primary and guest networks?
    From searching the forum, it appears not, but I'd like to confirm.  Is true for both both wireless and cabled range extension options?
    If I'm not able to extend the guest network this way, I'm inclined to settle for extending the primary network as I currently do and look for other ways to increase my network storage capacity (e.g. by upgrading the drive in my existing TC).

    If I purchase a second (5th generation) Time Capsule to replace the Linksys, can it be set up to extend both the primary and guest networks?
    Yes, either using wireless or an Ethernet connection between the two Time Capsules, providing that the 4th Gen Time Capsule is running at least firmware version 7.6.3.
    A wired Ethernet connection between the two Time Capsules is highly recommended. If you plan to extend using wireless, the second Time Capsule will need to be located where it can receive a very good signal from the first.

  • Using an airport extreme in both bridged mode and guest network with DHCP

    I currently use a third-generation airport extreme in bridge mode to connect my various Mac servers To the Internet. I'm using bridge mode on the AirPort Extreme because I have up to five static IP address (only using three now) I am currently not using the wireless network, and none of the servers are serving DHCP. I am looking at the Newer airport extreme with guest network Wi-Fi. My question is, does the new airport extreme base station support bridge- mode for any devices and host DHCP for the guest network connecting wirelessly to the base station?

    The AirPort Extreme cannot be in Bridge Mode and support a Guest Network.
    The AirPort must be configured to provide DHCP and NAT services if you want to enable the Guest Network function.
    If you really do have a 3rd Gen AirPort Extreme, it will support the Guest Network feature if you connect the AirPort directly to a simple modem.....not a modem/router or gateway type of devices.......and configure the AirPort to provide DHCP and NAT services for the network.

  • Guest Networking with Time Capsule - bridge mode?

    Hi, hopefully someone can help.
    I'm trying to set up guest networking with my time capsule but it's currently set up in bridge mode so it wont let me.
    When I try it in public IP address mode it says 'The DHCP range you have entered conflicts with the WAN IP address of your Airport wireless device'
    I'm completely new to networking and have no idea what most of these terms mean, despite googling them all!
    Can anyone advise on what I need to do to get it all set up?
    Thanks in advance, any help much appreciated!!
    Andy

    Is there no way I could switch off part of the router so it just becomes a modem (or are they completely different things)?
    It might be possible to convert the gateway to function as a simple bridge only modem, but that would involve checking with the support folks for the device. I doubt that your service provider will provide any assistance with this, because they will likely claim that this type of configuration is not supported.
    So, look to see who actually manufactured the device and check with their online forum or support site to see if the conversion to a simple bridge only modem is possible.
    You don't indicate whether you have cable of DSL service, and that will of course affect things as well. If you need to go to a simple modem, the best choice is always a device offered by your service provider, so that you will be supported in the event of Internet connection difficulties.
    If you try an off-the-shelf modem and have any problems, your service provider will offer little or no support. Often, you can get a free modem from your provider in return for a commitment of a year's service. Might be worth checking that out.

  • Guest network feature of Time Capsule/Airport Extreme in conflict with DNS on OS X Server?

    Hi, I want use the guest network feature of Time Capsule/Airport Extreme which requires an external DNS server but my OS X Server is the dns server...Can I configure server and airport with an external dns without messing up my OS server?
    Thx Ron

    If you want to use the guest network while also using your server for DNS - you will need to do the following:  It's a bit painful - but it works.
    On your Airport Device (Airport Extreme or Time Capsule) - in the Internet tab you will need to do one of the following:
    1)  Leave the DNS Servers Blank - which they will default to the DNS servers provided by your ISP.
    2)  Actually enter your ISP's DNS servers.
    3)  Enter Open DNS servers (I use 208.67.222.222 / 208.67.220.220).
    The DNS servers specified in the airport device must be internet routable addresses (if you are going to use the guest network functionality) - and cannot refer to private ip address (e.g. 10.x.x.x, 192.168.x.x, etc).
    Here is the painful part...on all of the devices (Macs, PCs, phones, ipads - that will be used on your "private" network 10.0.1.x - you will need to provide static DNS setting (but still allow DHCP to assign the devices IP address).  You will specify 10.0.1.13 as primary DNS and 208.267.222.222 (or your ISP's primary DNS IP).
    One you do this - your devices that you permanently use on your local network - will still use your server for DNS - and the external DNS - should your DNS server happen to be down.
    Anyone visiting your house - will connect to your guest network - and automatically be DHCP assigned a guest IP address - and the external DNS servers that you specified in the Airport Extreme device.
    This has been working great for me.  I suspect that the guest network functionality is flawed in the Airport Extreme/Express and Time Capsule.  Since I do not have another router that provides a guest network - I cannot say whether this issues is limited to the Airport devices - or whether this workaround would need to be done - regardless of which brand of router is providing the guest network.
    In a nutshell - your household permanent devices will have to specify static DNS servers - but your guests will connect seamlessly without having to change and risk messing up any of their device settings.
    If this solution works for you - Please be sure to click either "This solved my problem" or "This helped me".

  • How can I extend my wireless network with the Time Capsule?

    I recently bought a Time Capsule and set it up, backed up all my data, etc. It is currently plugged in to my AT&T Uverse wireless router via a LAN CAT5e cable. I am wondering if it is possible to wirelessly extend my preexisting network with the Time Capsule so I can move it somewhere else in my house where it can still pick up the signal but extend it. And if possible, how so? Or does it ALWAYS have to be wired'connected to my router for the internet to work?
    Thanks in advance.

    I am wondering if it is possible to wirelessly extend my preexisting network with the Time Capsule so I can move it somewhere else in my house where it can still pick up the signal but extend it.
    Sorry but no.  Extending using only wireless would require that the Time Capsule connect to another Apple router that is producing the wireless network.
    Another way of saying the same thing is that you must have two Apple routers to be able to extend the signal wirelessly.

  • How do you extend the guest network on a time capsule to an apple express?

    I have a time capsule in my main house with a password protected guest network i set up an apple express in the guest house to extend the networks. Unfortunately the guest house / apple express is only amplifying the main house network. I would like my tenant to join the guest network from apple express. Is that possible?
    How do you extend the guest network on a time capsule to an apple express?

    I would like my tenant to join the guest network from apple express. Is that possible?
    Sorry, but Apple does not allow the Guest Network to be extended in any way.

  • My network on the time capsule has a "lock" by it so I know that it requires a password. My guest network has no "lock" by it so I am thinking that it is not locked and people could use it. How  do I lock my guest network on my time capsule or delete it?

    My Time Capsule had a guest network that does not have a "lock" sign by it. So I am thinking that other people can use my wireless internet. My other network does have a "lock" by it. How do I delete or lock the guest network? I obvioulsy am not a computer savy individual so please use laymans terms if you can help me. Please and thank you.

    In any event, if your OS X version is 10.7.x, download and install AirPort Utility 5.6 for Lion:
    Lion: AirPort Utility 5.6.
    If your OS X version is 10.5.x or 10.6.x, download and install AirPort Utility 5.5.3:
    Leopard, Snow Leopard: AirPort Utility 5.5.3.
    After you install the appropriate version of AirPort Utility, open it. The program will be located in your Utilities folder, which in turn is found in your Applications folder.
    To open the Utilities folder, go to the Finder and select "Utilities" from the Go menu:
    AirPort Utility 5.6 looks like this:
    ... but make sure you use the version of AirPort Utility you just downloaded.
    Launch AirPort Utility and select your Time Capsule. Click Manual Setup, then the Guest Menu tab, then you can elect to disable the guest network, or to establish whatever security settings you want.
    The window looks somewhat like this:
    If your version of AirPort Utility does not look anything like that, you are probably not using the one you just downloaded. Find it and start over.
    When you are finished configuring your Time Capsule, click Update and allow the Time Capsule to restart.

  • I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    Replace the Time Capsule with one that has a larger hard drive. Or erase the one you have and start a new set of backups or backup one of the computers to a different backup drive.

  • Is it possible to create a second Guest network on a Time Capsule?

    I have found a few similar posts but they are pretty old and not exactly what i want. In the Time Capsule there is an option for a Guest network. Would it be possible to create a second guest network with the same time capsule? So that it would have internet but would be isolated from the other components on the system?

    Not exactly.....as things get tricky.  You could add another Apple router...but it would need to be configured in Bridge Mode to work correctly with the "main" router.
    A separate Guest Network feature cannot be enabled when the Apple router is set up to operate in Bridge Mode.
    This would apply to the "main" Time Capsule as well. So, you would need to insure that the Time Capsule was connected to a simple modem......not a modem/router combination device that is commonly offered by most Internet Service Providers.
    Check with your ISP to make sure that they provide you with a simple modem if you want to be able to use the Guest Network feature on any of the Apple routers.

  • How do I set up a guest network on my Time Capsule?

    how do I set up a guest network on my Time Capsule?

    If that is the case, then......
    Open Macintosh HD > Applications > Utiltiies > AirPort Utility
    Click Manual Setup
    Locate the Guest Network tab located just below the row of icons and click on it
    (If you do not see a Guest Network tab....you likely do not have the Time Capsule connected to a simple modem)
    Enter a check mark next to "Enable Guest Network"
    Type in a name for the Guest Network
    Enter the password and confirm
    Click Update to save your settings and Time Capsule will restart in 25-30 seconds

  • How do to set up time limits on a guest network

    I have a new generation Airport Time Capsule and I have set up a Guest Network for my kids but I would like to set up time limits on the Guest Network also, is there a way to do it?

    It is not possible to set up specific time limits for the Guest Network as a whole, but it is possible to set up individual time limits for each device that will be connecting to the Guest Network.....and, also the main network for that matter.
    If you can provide us with some more specifics on what you are trying to accomplish, how many devices will be involved, etc.......that will help us craft our answer to provide accurate information.
    Meanwhile, if you want to take a look at the general settings in Timed Access....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit
    Click the Network tab at the top of the screen
    Enter a check mark in the box next to Enable Timed Access
    Click on the Timed Access button
    Click Cancel to avoid making any changes to your current setup

  • Connecting to guest network with iPhone ios5

    After upgrading to iOS 5 my iPhone doesn´t work on the guest network on my Time Capsule (It connects, but internet won´t work). The reason seems to be that the assigned IP is not in the range defined for the guest network (but rather in the ip-range for my main network). Both my Macs and ipads get the right ip-address. I`ve tried this with 3 different iphones.
    All phones worked on the guest network before upgrading, and still works when I connect to my main wi-fi network.

    Did you perform a full power cycle and reset of your modem as follows?
    Push the reset button on the modem
    Power off the modem
    Pull the battery if it is easily accessible
    Power down all other devices on your network, order is not important
    Wait 30 minutes ( It sometimes takes even longer for the equipment back at the cable company to fully reset so that it will issue you a totally new fresh connection. The cable company will never admit this.)
    Reinstall the battery if you pulled it from the modem
    Power up the modem and let it run by itself for 3-4 minutes
    Start up the AirPort Extreme and let it run for 3-4 minutes so that it will fully associate with the modem
    Start each device up on the network one at a time about a minute apart
    Check for operation.

  • How do I set user time limits on a guest network?

    How do I set user time limits on a guest network AirPort Time Capsule?

    It is not possible to set up specific time limits for the Guest Network as a whole, but it is possible to set up individual time limits for each device that will be connecting to the Guest Network.....and, also the main network for that matter.
    If you can provide us with some more specifics on what you are trying to accomplish, how many devices will be involved, etc.......that will help us craft our answer to provide accurate information.
    Meanwhile, if you want to take a look at the general settings in Timed Access....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit
    Click the Network tab at the top of the screen
    Enter a check mark in the box next to Enable Timed Access
    Click on the Timed Access button
    Click Cancel to avoid making any changes to your current setup

  • Airport Extreme 802.11AC + 5th Gen and guest network access

    I have the current gen Airport Extreme 802.11AC with a 5th Gen extending the network. With this setup, I am unable to login using our guest network setup. I have tried using guest network with a password and one without but its the same results. When a guest logins, it stuck attempting to login with no error messages.
    So is it possible to have this configuration and still have guest network access?

    Please review what I said originally.......that the guest network function on the AirPort Extreme is designed to work with a simple modem......so the AirPort acts as the main router for the network..
    Another way of saying the same thing is that the AirPort needs to be "in charge" of your network for the guest feature to work correctly. The AirPort cannot be in charge if it is connected to another device that is already configured to be the main router on your network.....your Actiontec modem/router.
    The Actiontec device combines the functions of a separate modem and a separate router in one package. This type of device is known as a modem/router, or also known as a gateway.
    Some folks call a modem/router or a gateway......a modem. So, things can get confusing.
    I do not know if it is possible for the Actiontec device that you have to be configured to act as a simple modem.....so the routing functions of the device are completely turned off. (Turning off the wireless on the Actiotec does not turn off the routing function).
    If you turn off the wireless on the Actionec, it becomes a modem and a wired router. And that wired router is still in charge of your network.
    The guest network feature will not work correctly unless the AirPort is in charge of your network.
    My suggestion was for you to ask your Internet Service Provider (ISP), if they could supply you with a simple modem.  That is all that you need. You don't need two routers....and the Actiontec that you have now is not allowing the guest feature to work correctly.

Maybe you are looking for