Extending WL 7.0 evaluation

Hi,
I have a simple question.
How can I get the evaluation extension for weblogic 7.0?
Is there a link on the web page where I can donwload the new
license key from ? They have this for Weblogic 6.1
thanks
Sanjeev Hegde

Hello Sanjeev,
You will find this extension at : http://support.bea.com/welcome.jsp
Best regards,
Ludovic.
Developer Relations Engineer
BEA Customer Support
"Sanjeev Hegde" <[email protected]> a écrit dans le message news:
3d0e0dc5$[email protected]..
>
Hi,
I have a simple question.
How can I get the evaluation extension for weblogic 7.0?
Is there a link on the web page where I can donwload the new
license key from ? They have this for Weblogic 6.1
thanks
Sanjeev Hegde

Similar Messages

Need a 45 day evaluation activation of IMAQ vision

I have an urgent need to evaluate the IMAQ vision and Analysis Assistant software(s) for my present
MX12P camera/PCI-1422 hardware. Downloaded the Analysis Assistant for 45 days eval. Downloaded
the IMAQ for also 45 days eval (extended). But unable to activate it in evaluation mode. Can
you send temp code for activation???
My management wants to buy the software if I can demonstrate soon that it works.
Larry Teresi
Sr Test Engineer
Compound Photonics
480-620-1362 cell

Hi Larry,
There is unfortunately an issue with automatically extending your 7-day evaluation license to 45 days through the Vision software itself. This was reported to R&D (CAR # 381293) for further investigation. For now, the above suggestions should be able to get you an extended evaluation license, or you can try through this link: https://delta.ni.com/extendedevaluation/index.xhtml?p_lang=US
Regards,
Vijay S.
National Instruments

The following serial numbers are invalid

I upgraded lookout to 6.7.1 and my old serial number will not work till NI ships the new disk. I really need this up and running yesterday! The evaluation program won't let me run past 2 hours because I have more than 50 I/O connections. When I call in to NI they say shipping for my product is about 3 week out. Help?

jbesselm got it, you can also use the extend option on the evaluation/registration reminder to extend 30-days.
Forshock - Consult.Develop.Solve.

Adobe InDesign API Navigator is available on Adobe labs

Adobe InDesign CS5 API Navigator is available on Adobe labs web site. You can download for free.
http://labs.adobe.com/technologies/indesign_apinavigator/
If you are an InDesign C++ plug-in developer, you should definitely try this new tool.
The InDesign API Navigator is a tool for InDesign C++ Plug-in developers. It works as an add-in for Visual Studio on Windows and as a plug-in for Xcode on Mac OS X. It helps developers get API information within the IDE directly, including Boss definitions, aggregating Bosses for interfaces, and ODFRC type definitions. It also adds syntax coloring for ODFRC files (.fr and .fh). It extends the debugger expression evaluator to understand some InDesign types, which allows the debugger to format some InDesign types nicely in the variables pane (Xcode) or watch window (Visual Studio) while debugging. In Visual Studio, it enables the IDE to browse InDesign C++ APIs.
Try it and give your comments.
Thanks

Hi,
Have you an API Navigator version to Visual Studio 2010?
/Karoly

"The evaluation period for some of your software can be extended..."

Installed LabVIEW 2012 for which we have a license. Apparently it installed Application Builder without my knowledge or consent. Now, -everytime- I try to launch LabVIEW I get an annoying dialog, "The evaluation period for some of your software can be extended. Would you like to extend the evaluation periods now?" Only if you will let me get my work done and quit bothering me with advertisements...
How do I get rid of this "evaluation" software that I did not install and do not want?

add/remove programs or hit that little check box on the Eval advertisment window that says do not show me the ad aagain.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Extending the evaluation license asks for current activation code. Where is it?

I am attempting to extend the evaluation period for the Vision Acquisition Software. I have obtained an activation code from NI.com to manually enter and extend the evaluation period. When I access the activation wizard through the NI License manager and select the option to manually enter the activation code, the next step asks for the current activation code. How do I find out the current activation code so that I can advance to the step for entering the new activation code?
Thank you for your assistance.

I am not involved with the practice of extending evaluation licenses. However, if you directly received that code from NI, I would recommend to contact your local NI representative.

CUBAC: how to extend (again) evaluation license

Hello,
we have installed a CUBAC and, after the initial 5 days of evaluation, we have activated the 60 days evaluation license.
Now, we have had issues to obtain the permanent license, so it won't arrive before the expiration of the 60 days.
Is there a way to extend again the evaluation license?
TIA and regards.

Hi,
I have noticed that on the web page
http://cisco-ac.arcsolutions.com/Use...movaltool.aspx
there is a "License Removal Tool".
When I try to launch it on CUxAC server, it first shows the MAC Address of the server, then it asks for a "Removal code".
I have three questions:
In which scenarios can I use this tool?
Can I use it to remove the 60 days evaluation license?
How can I obtain the "Removal code"?
Thanks again and regards.

Evaluation of SQL Server 2012 R2 expired is there any way to extended the evaluation time?

Hello,
My Evaluation of SQL Server 2012 R2 expired is there any way to extended the evaluation time?
Please let me know,
Thank You! and Happy New Year

Hello,
Try to roll back the time of the computer to a few days back until you are able to perform an edition upgrade.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

CM50 Extended Evaluation - to set the period

Hi dears,
I'm using CM50 to do extended evaluation of capacity. Currently it's coming out by Day, and I want the report by Month.
I know the Overall profile SAPSFCG020 can be set in SPRO in OPD0, but then where exactly do I need to change to switch the reporting to Month?? I tried changing the Time profile but it doesn't seem to have any effect...
Please help!!

Hi,
Before directly using it to release in /sapapo/mc90 or in background job, you can check it using the period split simulator which is at the top in /sapapo/sdp_extr. You can give date range, random value of forecast to be splitted and also the calendar to be used. Distribution function is what decides how value is split within the period(in your case it's week). So use this functionality.
Remember in background jobs you can't give dates, planning horizon is taken into account. The "No of periods" in the period split profile plays a crucial role in background job.
If more value is released(spikes i think in your terms) then forecast is more i think in 6th month.
Hope this helps.
Thanks and Regards,
Nithin.

Custom evaluation of EL expressions - extend ExpressionEvaluator?

I have a model class (corresponding to a database table) with some exclusion flags, where the flags indicated that a field should not be displayed on a page where we choose to apply exclusions. For example, a person may request that their username and date of birth not be listed in a directory search, yet we would still want to show the username/birthdate on a page where the user is looking at their own information. For example:
public class Person {
    private String name;
    private Date birthDate;
    private String username;
    private boolean excludeBirthDate;
    private boolean excludeUsername;
    // getters and setters
}I want to write a tag such that I can say in my JSP:
<page:applyExclusions>
    ${person.username} ${person.name} ${person.birthDate}
</page:applyExclusions>and have only the person's name display (if they have requested that the other fields be excluded).
Looking at the tags API, it seems like I would want to have my own ExpressionEvaluator whose evaluate method says something like
public Object evaluate(String expr, Class type, VariableResolver resolver, FunctionMapper mapper) {
    if (type.equals(Person.class) &&
         expr.equals(someExcludedField)) {
         // return empty String or something to say "don't display the actual value"
    else {
        // ok to display value, evaluate like normal
        return super.evaluate(expr, type, resolver, mapper);
}Not sure if I'm on the right track with my idea or if there's a better way to accomplish this?

An expression evaluator is exactly that - searches for some variables in scope and performs evaluation on them according to a set of rules.
IMO you shouldnt be changing this functionality to include your business logic there. You should be writing your own custom tags for such pruposes, something like
<myTag:applyExclusions username="${userName}" name="${name}" birthDate="${brithDate}/>And in your tag code, you would have
public int doEndTag() throws JspException {
        try {
            pageContext.getOut().println("UserName "+ userName);
            if(user is viewing the page)//your logic here{
                 pageContext.getOut().println("Name "+ name);
                 pageContext.getOut().println("Birth Date "+ birthDate);
        } catch (IOException exp) {
            throw new JspException(exp);
        return EVAL_PAGE;
} where userName, name and birthDate are attribute properties of the tag with get and set methods as evnafets suggested.
Hope that helps.
cheers,
ram.

SAP NetWeaver 7.0 ABAP Trial Version; extending the evalution period

Hi,
Is it possible to extend the NetWeaver 7.0 ABAP Trial Version past the initial 90 days. The old WAS 6.2 minibasis trial version was easily extendible.
Thank you,
Phil

Hi,
go to Transaction slicense or on http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm.
Regards

Extend license for evaluation versions of server 2008 rs and sql 2008 rs

We had to stop our testing because of seasonal business requirements and now have only 11 days before the expiration of our trial versions of SQL Server 2008 R2 and Windows Server 2008 R2. How do we extend the license for 60 days to complete our testing
and start the move to a new production system?

Hi,
Please refer to following article and check if can help you.
Extending
Your Activation Grace Period on Windows Server 2008 and 2008 R2
However, as GreenlightTech suggested, purchasing licenses and activating will be a better option before activation
Grace Period
expired.
If anything I misunderstand or any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Boot up of Windows Server 2012 Essentials seems slow (extended Please Wait screen) and there are errors in Health Report

Dear Sir or Madam,
I have been experimenting with the evaluation version of WS2012e trying to get the installation and subsequent build into an optimal set up, and once I have everything I want it to do mapped out, I'll set it up with the full version with using the key that
I bought.
However, I've noticed that the server seems to experience a delay during cold boot - it sits with a Please Wait screen for about 60-90 seconds before it presents the screen with an option to Log on. I have also discovered from running Health
Report, that there are some entries in the event logs which appear to coincide with start up times, and which seem to be interconnected to each other in the issues they are describing, and I have copied an example of one of those health reports below.
I assume that everything sorts itself out in due course, because the events say the process will be re-attempted and these errors don't repeat again after the system has booted up. I also have the server set to suspend when not in use with the Lights
Out add in, so it shouldn't need to cold boot often - but I wondered if there's a way to correct these errors so that they don't hold up the boot up process? I'm also concerned that these errors will cause me later problems with storage pools and
the like at a later date - the disk replication one seems particularly worrying. Alternatively, are these errors just a normal part of the start up process - the timing of when different processes start relative to each other - and can be safely ignored?
In trying to understand what the events describe, I thought that WE2012e acted as its own Domain Controller, and yet it seems from the event log entries that it is waiting for another server to respond to AD / DC requests (but there isn't another server
on my home network). The other thing I remember from when I first tried out WS2012e, is that it took control of DHCP or DNS from the router, and I found that frustrating when waking up my laptop and it wouldn't connect to the internet until the server
had fully booted up and re-asserted its network settings. Is this another symptom of the same problem? I remember seeing a posting at the SBS Diva's site about how to update the server so that it gave connected PCs a backup option for connecting
to the internet when the server wasn't available, and was going to try to find that again to see if that helped.
By way of background - there isn't another server in my home network. This is an attempt to do a clean install onto the same hardware that I ran the initial trial of WS2012e, now that the trial has expired, so I'm not trying to migrate from an existing
server. I moved all the data on the trial server off onto an external disk, with the intention of importing it back once I had the Storage Pools set up the way I wanted on the new build, and since I didn't want to keep anything else about the server
trial. Am I correct in thinking that I don't need to go down the Migration route during installation, and can go through a Clean install in this circumstance?
I'm running on an Asus P8-H77-i motherboard, with an i5-3470s CPU and 16MB RAM, and I have WS2012e installed on 256Mb SSD formatted under GPT with uEFI boot - the latter being the main reason for the reinstall, instead of just giving the Evaluation
version the new key on the original MBR set up. I've also enabled Intel Rapid Storage and Rapid Start - and successfully set aside the hibernate partition on the SSD - but discovered that this is about forcing a hibernate after suspend, allowing
the system to power down until its needed again, and then resuming from hibernate on the SSD rather than cold boot each time. That seems to work, but doesn't improve the cold boot times at all, which was what I was hoping for - ideally the way my
laptop will boot from cold in a few seconds into Windows 8.
Yours faithfully,
Avon
======
Health Report extract.
Critical Errors in Event Logs in Last 24 Hours
DFSR
Event ID: 3221226674
The DFS Replication service failed to contact domain controller to access
configuration information. Replication is stopped. The service will try again
during the next configuration polling cycle, which will occur in 60 minutes.
This event can be caused by TCP/IP connectivity, firewall, Active Directory
Domain Services, or DNS issues.
Additional Information:
Error: 160 (One or more arguments are not correct.)
Last occurrence: 26 May 2014 18:51:28
Total occurrence(s): 2
DNS
Event ID: 2147487661
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
Last occurrence: 26 May 2014 18:51:15
Total occurrence(s): 2
ADWS
Event ID: 3221226674
This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Last occurrence: 26 May 2014 18:51:08
Total occurrence(s): 2
NTDS General
Event ID: 2147486534
The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate,
Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple binds that
are performed on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds,
configuring the server to reject them will improve the security of this server.
Some clients may currently be relying on unsigned SASL binds or LDAP simple binds over a non-SSL/TLS connection,
and will stop working if this configuration change is made. To assist in identifying these clients, if such binds occur this
directory server will log a summary event once every 24 hours indicating how many such binds
occurred. You are encouraged to configure those clients to not use such binds. Once no such events are observed
for an extended period, it is recommended that you configure the server to reject such binds.
For more details and information on how to make this configuration change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
You can enable additional logging to log an event each time a client makes such a bind, including
information on which client made the bind. To do so, please raise the setting for the "LDAP Interface Events" event logging category
to level 2 or higher.
Last occurrence: 26 May 2014 18:51:00
Total occurrence(s): 2
=======

Hi KerguelanAvon,
Based on your description, it seems to be hard to narrow down the cause of this issue. Please refer to following operations and monitor the result. It may help us to go further, and then solve this issue.
1. Please refer to the following article and troubleshoot slow boot.
New Slow Logon, Slow Boot Troubleshooting Content
2. On your server 2012 essentials, please start a BPA scan and fix all that it can find, then monitor the result.
Regarding to those critical Errors in Health Report, please perform
Dcdiag on the server. Meanwhile, please refer to the following article and troubleshoot network connectivity, firewall setting and AD DS issue.
DFSR Event 1202 (DFS Replication)
Hope this helps.
Best regards,
Justin Gu
Hi Justin,
I'm reading through the links you referred me to but it's taking a while. In the meantime I tried running BPA as you suggested. I'm sure when I ran it before, it didn't say much beyond 81 checks completed, and I couldn't find a way to get any
more detail.
Now it says
Problem:
The DNS client is not configured to point only to the internal IP address of the server.
Impact:
If the DNS client is not configured to point only to the internal IP address of the server, DNS name resolution can fail.
Resolution:
To resolve this problem:
1. From the client computer, open the Properties page for the network connection.
2. Make sure that DNS is configured to point only to the internal IP address of the server.
Except that it is.
Connection-specific DNS Suffix:
Description: Broadcom 802.11n Network Adapter
Physical Address: ‎00-1B-B1-28-AE-63
DHCP Enabled: Yes
IPv4 Address: 192.168.1.133
IPv4 Subnet Mask: 255.255.255.0
Lease Obtained: 03 June 2014 21:56:49
Lease Expires: 05 June 2014 20:24:20
IPv4 Default Gateway: 192.168.1.1
IPv4 DHCP Server: 192.168.1.1
IPv4 DNS Server: 192.168.1.49
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::80ef:48d5:9fde:f10e%14
IPv6 Default Gateway:
IPv6 DNS Server:
I'll try rebooting from the current windows 7 build over to windows 8 on my dual boot laptop, to see if that makes any difference, since it is the only other client PC connected to the server at the moment.
Thanks, Avon.

May I have an extended trial period for adobe photoshop cs6?

I had already a 30 days free trial period for adobel photoshop and I would like to know if I could get an extended free trial period as unfortunately I had no time left in my work schedule to properly try the photoshop cs6 downloaded.
Thank you for your understanding.
Best,
Jacques Olivar

I am sorry Tyrone41 there is no way to extend the trial period. If you wish to continue evaluating the software then please install the trial on another computer.

How to crop pages using Adobe LiveCycle ES2 PDF Generator and Acrobat 9.2 Pro Extended

Hi all,
I'm evaluating the possibilities of Adobe LiveCycle ES2.0 PDF Generator in order to convert on the fly (programmatically) MS Office Documents and Visio drawings into PDF files.
I'm able to trigger this process using the Webservices API (from within C#). However when generating the PDF files in this way, each and every PDF file has a lot of white margins around it as it is generated as an 8x11 inch page.
I have been looking in ways to crop these white margins from around the information, so that the PDF content is only showing the actual content (in order to be used as an image).
I found a way of doing this manually by opening the generated PDF file of LiveCycle in Acrobat 9.2 Pro Extended and using the Document > Crop Pages... option.
So my question is: Can this be done programmatically using Adobe LiveCycle ES (and/or API functions of the Acrobat tool).
The envisioned solution would run on a server (without interaction/monitoring requirements by a human).
Any input about this is highly appreciated.
Kind Regards,
Raf
Raf Snijders

Hi all,
I'm evaluating the possibilities of Adobe LiveCycle ES2.0 PDF Generator in order to convert on the fly (programmatically) MS Office Documents and Visio drawings into PDF files.
I'm able to trigger this process using the Webservices API (from within C#). However when generating the PDF files in this way, each and every PDF file has a lot of white margins around it as it is generated as an 8x11 inch page.
I have been looking in ways to crop these white margins from around the information, so that the PDF content is only showing the actual content (in order to be used as an image).
I found a way of doing this manually by opening the generated PDF file of LiveCycle in Acrobat 9.2 Pro Extended and using the Document > Crop Pages... option.
So my question is: Can this be done programmatically using Adobe LiveCycle ES (and/or API functions of the Acrobat tool).
The envisioned solution would run on a server (without interaction/monitoring requirements by a human).
Any input about this is highly appreciated.
Kind Regards,
Raf
Raf Snijders

Extending WL 7.0 evaluation

Similar Messages

Maybe you are looking for