ExtendScript eventListeners (For CC Mac 9.x)

Hello Everyone:
Okay, okay it's probably my aged gray matter that is causing such difficulty but after six months of dealing with Javascript eventListeners I still don't get them. Does anyone know of a good tutorial/reference that will help this poor fading programmer figure them out.
I do not have a specific question; I only know that current documentation does a very poor job of providing a complete reference in one place if one is trying to learn about event listeners.
R,
John

PM-Apple,
Have you checked out the following web page? It is the best starting point after the shipping examples that use Apple Events with Excel. I also tried to search Google for other examples (I didn't find any others on NI's site) and I found a few free trials of software that use LabVIEW and Apple Events. Try that search and see what you find. I am very sorry that I have not been as much help as I would like to be.
Using Apple Events and the PPC Toolbox to Communicate with LabVIEW Applications on the Macintosh
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Similar Messages

Ok, I have two itunes library account one for the PC and one for my Mac, I have my first iphone on my PC, but i just upgrade and I would like to use my new iphone on my Mac but all of my apps and other stuff is in the first library.. How do I put my apps

ok, I have two itunes librarys account, one for my PC and one for my Mac, I use the PC for my iphone, but I upgrade my iphone and all my apps and
stuff is on the first itunes library. How do I put the apps from one iphone to the otherusing two dirffernt itunes library? please help..

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

I have one apple ID for my MAC and another used for both my iPhone and IPad. Purchases from iTunes don't appear on either my iPhone or iPad only only the MAC. How do I sync the two IDs?

I have one Apple ID for my MAC and iTunes account and another that is used for both my iTunes and iPad. When I purchased music from iTunes using the Mac ID, the music isn't available on my iTunes or iPad. Neither lets me change my ID so how do I fix this issue so I can play the music on all three?

Hello chlanli
You would need to use one Apple ID for purchases in order to get them across all of your devices and computer. If you want you can use one Apple ID for purchases and the other one to sync personal data. The article below will explain further.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Regards,
-Norm G.

I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

I can't ring ibooks in my App Store for my mac-what do i do, how do i download it in my mac?

i can't ring ibooks in my App Store for my mac…what do i do, how do i download it in my mac?

Are you running Mavericks 10.9? That is required for iBooks.

I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

Are you in the US? Order one from here: http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
Or check out Best Buy.

How do I use my 26" Polaroid FLM-2601 Television as a montor for my mac mini?

How do I use my 26" Polaroid FLM-2601 Television as a montor for my mac mini? I keep getting "no signal" for every resolution and refresh rate I've tried both for VGA and DVI settings (listed in the back of the manual for the polaroid tv and a few people posted online).
I plug the VGA cable into my old monitor, changing the settings and move the VGA input cable to the TV, (direct to VGA in or thru a VGA to DVI adaptor) and so far thru either input I only get a black screen with "No Signal - VGA Input" or "No Signal - DVI Input" displayed, so then I go back to the old monitor, try another resolution/refresh rate and try the TV again. This can't be the best way to do this - plus I'm out of resolution options.
Any help would be greatly appreciated!!!

Go to System Preferences>Displays. Change the settings to your desire.

Contacts search for cisco Jabber for Windows & MAC

Hello,
Please assist on given below query !!
System Deatails of CUCM & IM Presence Server
CUCM:
1> System version: 9.1.1.20000-5
2> VMware Installation: 2 vCPU Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, disk 1: 80Gbytes, 4096Mbytes RAM
3> Physical Server UCS210 M2
4> Already Integrated with IM & Presence
IM & Presence:
1> System version: 9.1.1.20000-5
2> VMware Installation: 1 vCPU Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, disk 1: 80Gbytes, 2048Mbytes RAM
3> Physical Server UCS210 M2
4> Already Integrated with CUCM
Requirement:
1> User Search base for Cisco Jabber for Windows & MAC Client
2> Will we able to get contacts list(Jabber For windows & MAC) as like "Lotus Sametimes" for all users?
Every reply would highly Appreciated!!

Hi Karthik,
Thanks for your reply!
I have gone through the link but query is different actually, please assist on below query and provide any document links if possible.
1> The contacts does not appear when I perform a search
2> Do I required to integrate LDAP for same? If Yes Then Do I need to perform integration with CUCM Or IM & Presence? Or Only CUCM? Or only IM & Presence? (Please post a link to perform same)
3> Please also provide If any specific system requirement for LDAP server.
4> Is it possible without LDAP integration?
It is really urgent and every post would highly appreciate..........

Is this the correct type of Ram for a mac mini?

I have a 2007 Mac mini, and want to go from 1gig to 2 gigs of Ram.
I currently have 2 512's
I need to know 2 things. (i'm pretty sure on both but i'm not a huge hardware guy to bare with me)
1. Will there be any compatibility problems? I.e if i upgrade to 2 gigs will it even help or because the rest of the computer is not being upgraded will it be useless?
2. If i'm good to go, Is this the correct type of Ram? http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=4E665783A5CA7304
Not sure if these are needed but will post anyway:
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Type: DDR2 SDRAM
Thank you in advance <3

NO, it will NOT work.
You have to find the memory specific for Mac, and rule of thumb, Mac Intel chips usually take "ECC" memory. On occasions, You can get away with Non-ECC (on certain PPC Power Mac G5 towers) -- You can check on-line stores, like Newegg, Tigerdirect, or Goolge search for the Mac Mini memory. I got mine (for my two Mac 2,1) on line, and I put 4G (2x 2G), although only 3G was available.
It is worth of upgrade it. just need to find the right memory.

Can I use My Ibook G4 as a Second Monitor For My Mac Mini G4

Hi
I wonderd if theres any way of being able to use my 14'' Ibook G4 as a second monitor for my Mac Mini G4? I already have a Samsung SyncMaster 913n. Is there any way of doing this by firewire using both monitors, if not what cables would I need?
Thanks

There is a application called Synergy which you may find useful. It allows the keyboard, mouse and clipboard to be shared across computers, and even different operating systems. It's not strictly what you have asked for as each computer still runs it's applications (and operating system) separately, meaning you can not drag windows between the screens, but by allowing you to copy and paste between the computers, and seamlessly slide your mouse and keyboard input between them you may get the effect you desire. Oh, and it is free and open-source, so why not give it a whirl?
You will need to connect the machines with a TCP/IP network, which can be done either with an ethernet patch cable, or alternatively as you suggest, using FireWire - these two articles may assist you in setting that up: IP over FireWire in Panther and Tiger.
As a point of note, a commercial program, MaxiVista allows exactly what you are looking for under Microsoft Windows.
Hope that helps.
Jason

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (use my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit to my TV?

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (using my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit the movie from my MacBook to the TV? I also tried an HDMI cable and had the same issue.

you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
this will display ur mbp main screen. good luck.

HDMI to TV as Display for New Mac Mini DOESN'T WORK

I bought a new Mac Mini and was told I could us HDMI to my TV as display.   I was using this TV as display for older Mac Mini (VGA) and for a Windows PC, and DVD via HDMI.     TV is one year old.
The Genius at the store who sold me the new mini said all I needed was an HDMI cable.   Which I purchased.
The screen comes up for the Setup Assistant but as soon I select continue is goes to gray, mixed color scanning garbage mode.    If I turn the TV off and back on, the screen returns (now at the next prompt in the setup assistant) but again it goes gray after hitting continue.    Unusable, CANNOT set up my new purchase.
Unfortunately, the DVI to VGA adapter on my old mini is different and doesn't mate to the HDMI to DVI adapter that ships with new MacMini, so I can't test VGA.   The old DVI to VGA has extra pins not on the new one.
My purchase is not usable and is extremely poor.   Buyer beware I guess.

I have been using MacMini's for commercial digital signage/video conferencing gateway usage for sometime now, they all have HDMI output, about one third are on Lion the others still on Snow Leopard, here's what I have found.
Toshiba & LG tv's are generally reliable, Samsung and Philips generally are not, Panasonic, Sony, Sharp & Viewsonic all work, somtimes with a bit of work from me.
Cables are important (always look for compatibility with HDMI revision 1.3 or greater (1.4 preferred), don't waste your money on exotic brands, adhere to the distance limitations, I generally send the HDMI signal wirelessly (cost of labor to add wiring to an existing space can be very high) so am limited to less than 50ft, same as with a wire.
READ THE TV MANUAL, find out what HDMI choices your tv possesses, is there a 'parallel' audio input available for the times when your signal origin is a MDP or DVI.
Some TV's just don't work well, cut your losses and get another when faced with this issue.

Hi recently i changed my apple id for itunes and icloud for my mac ipad and iphone   for the ipad and iphone all is working well but on my Mac itunes is ok bit icloud is blocked into my old Apple id and i am not able to change it    Please help

Hi i recently changed mi apple id for my Mac, ipad and iphone    With great difficulty i managed to change my Ipad\Iphone id    for itunes and icloud
But on my mac, itunes is ok but icloud is blocked on to my old Apple id         I thought it would would automatically sync when ichanged the id in itunes
Obviously not    Can somebody pleas help   Thanks

You need to go to System Preferences (this may be called Settings in Mountain LIon)>iCloud and sign out. Then sign in with the new ID.

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

ExtendScript eventListeners (For CC Mac 9.x)

Similar Messages

Maybe you are looking for